- 12 Oct, 2020 4 commits
-
-
John Fastabend authored
In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
-
John Fastabend authored
The skb_set_owner_w is unnecessary here. The sendpage call will create a fresh skb and set the owner correctly from workqueue. Its also not entirely harmless because it consumes cycles, but also impacts resource accounting by increasing sk_wmem_alloc. This is charging the socket we are going to send to for the skb, but we will put it on the workqueue for some time before this happens so we are artifically inflating sk_wmem_alloc for this period. Further, we don't know how many skbs will be used to send the packet or how it will be broken up when sent over the new socket so charging it with one big sum is also not correct when the workqueue may break it up if facing memory pressure. Seeing we don't know how/when this is going to be sent drop the early accounting. A later patch will do proper accounting charged on receive socket for the case where skbs get enqueued on the workqueue. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
-
John Fastabend authored
When we receive an skb and the ingress skb verdict program returns SK_PASS we currently set the ingress flag and put it on the workqueue so it can be turned into a sk_msg and put on the sk_msg ingress queue. Then finally telling userspace with data_ready hook. Here we observe that if the workqueue is empty then we can try to convert into a sk_msg type and call data_ready directly without bouncing through a workqueue. Its a common pattern to have a recv verdict program for visibility that always returns SK_PASS. In this case unless there is an ENOMEM error or we overrun the socket we can avoid the workqueue completely only using it when we fall back to error cases caused by memory pressure. By doing this we eliminate another case where data may be dropped if errors occur on memory limits in workqueue. Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by:
-
John Fastabend authored
For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by:
-
- 11 Oct, 2020 13 commits
-
-
Alexei Starovoitov authored
Move the bpf/bpf-next patch processing queue to patchwork.kernel.org. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201011200149.66537-1-alexei.starovoitov@gmail.com
-
Toke Høiland-Jørgensen authored
The bpf_fib_lookup() helper performs a neighbour lookup for the destination IP and returns BPF_FIB_LKUP_NO_NEIGH if this fails, with the expectation that the BPF program will pass the packet up the stack in this case. However, with the addition of bpf_redirect_neigh() that can be used instead to perform the neighbour lookup, at the cost of a bit of duplicated work. For that we still need the target ifindex, and since bpf_fib_lookup() already has that at the time it performs the neighbour lookup, there is really no reason why it can't just return it in any case. So let's just always return the ifindex if the FIB lookup itself succeeds. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Alexei Starovoitov authored
"Daniel T. Lee" says: ==================== To avoid confusion caused by the increasing fragmentation of the BPF Loader program, this commit would like to convert the previous bpf_load loader with the libbpf loader. Thanks to libbpf's bpf_link interface, managing the tracepoint BPF program is much easier. bpf_program__attach_tracepoint manages the enable of tracepoint event and attach of BPF programs to it with a single interface bpf_link, so there is no need to manage event_fd and prog_fd separately. And due to addition of generic bpf_program__attach() to libbpf, it is now possible to attach BPF programs with __attach() instead of explicitly calling __attach_<type>(). This patchset refactors xdp_monitor with using this libbpf API, and the bpf_load is removed and migrated to libbpf. Also, attach_tracepoint() is replaced with the generic __attach() method in xdp_redirect_cpu. Moreover, maps in kern program have been converted to BTF-defined map. --- Changes in v2: - added cleanup logic for bpf_link and bpf_object in xdp_monitor - program section match with bpf_program__is_<type> instead of strncmp - revert BTF key/val type to default of BPF_MAP_TYPE_PERF_EVENT_ARRAY - split increment into seperate satement - refactor pointer array initialization - error code cleanup ==================== Signed-off-by: -
Daniel T. Lee authored
Most of the samples were converted to use the new BTF-defined MAP as they moved to libbpf, but some of the samples were missing. Instead of using the previous BPF MAP definition, this commit refactors xdp_monitor and xdp_sample_pkts_kern MAP definition with the new BTF-defined MAP format. Also, this commit removes the max_entries attribute at PERF_EVENT_ARRAY map type. The libbpf's bpf_object__create_map() will automatically set max_entries to the maximum configured number of CPUs on the host. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201010181734.1109-4-danieltimlee@gmail.com
-
Daniel T. Lee authored
>From commit d7a18ea7 ("libbpf: Add generic bpf_program__attach()"), for some BPF programs, it is now possible to attach BPF programs with __attach() instead of explicitly calling __attach_<type>(). This commit refactors the __attach_tracepoint() with libbpf's generic __attach() method. In addition, this refactors the logic of setting the map FD to simplify the code. Also, the missing removal of bpf_load.o in Makefile has been fixed. Signed-off-by:
-
Daniel T. Lee authored
To avoid confusion caused by the increasing fragmentation of the BPF Loader program, this commit would like to change to the libbpf loader instead of using the bpf_load. Thanks to libbpf's bpf_link interface, managing the tracepoint BPF program is much easier. bpf_program__attach_tracepoint manages the enable of tracepoint event and attach of BPF programs to it with a single interface bpf_link, so there is no need to manage event_fd and prog_fd separately. This commit refactors xdp_monitor with using this libbpf API, and the bpf_load is removed and migrated to libbpf. Signed-off-by:
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This series addresses most of the feedback [0] that was to be followed up from the last series, that is, UAPI helper comment improvements and getting rid of the ifindex obj file hacks in the selftest by using a BPF map instead. The __sk_buff data/data_end pointer work, I'm planning to do in a later round as well as the mem*() BPF improvements we have in Cilium for libbpf. Next, the series adds two features, i) a helper called redirect_peer() to improve latency on netns switch, and ii) to allow map in map with dynamic inner array map sizes. Selftests for each are added as well. For details, please check individual patches, thanks! [0] https://lore.kernel.org/bpf/cover.1601477936.git.daniel@iogearbox.net/ v5 -> v6: - Going with Andrii's suggestion to make the misconfigured verifier test more robust, and only probe on -EOPNOTSUPP (Andrii) v4 -> v5: - Replace cnt == -EOPNOTSUPP check with cnt < 0; I've used < 0 here as I think it's useful to keep the existing cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) for error detection (Andrii) v3 -> v4: - Rename new array map flag to BPF_F_INNER_MAP (Alexei) v2 -> v3: - Remove tab that slipped into uapi helper desc (Jakub) - Rework map in map for array to error from map_gen_lookup (Andrii) v1 -> v2: - Fixed selftest comment wrt inner1/inner2 value (Yonghong) ==================== Signed-off-by:
-
Daniel Borkmann authored
Extend the test_tc_redirect test and add a small test that exercises the new redirect_peer() helper for the IPv4 and IPv6 case. Signed-off-by:
-
Daniel Borkmann authored
Rename into test_tc_redirect.sh and move setup and test code into separate functions so they can be reused for newly added tests in here. Also remove the crude hack to override ifindex inside the object file via xxd and sed and just use a simple map instead. Map given iproute2 does not support BTF fully and therefore neither global data at this point. Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201010234006.7075-6-daniel@iogearbox.net
-
Daniel Borkmann authored
Extend the "diff_size" subtest to also include a non-inlined array map variant where dynamic inner #elems are possible. Signed-off-by:
-
Daniel Borkmann authored
Recent work in f4d05259 ("bpf: Add map_meta_equal map ops") and 134fede4 ("bpf: Relax max_entries check for most of the inner map types") added support for dynamic inner max elements for most map-in-map types. Exceptions were maps like array or prog array where the map_gen_lookup() callback uses the maps' max_entries field as a constant when emitting instructions. We recently implemented Maglev consistent hashing into Cilium's load balancer which uses map-in-map with an outer map being hash and inner being array holding the Maglev backend table for each service. This has been designed this way in order to reduce overall memory consumption given the outer hash map allows to avoid preallocating a large, flat memory area for all services. Also, the number of service mappings is not always known a-priori. The use case for dynamic inner array map entries is to further reduce memory overhead, for example, some services might just have a small number of back ends while others could have a large number. Right now the Maglev backend table for small and large number of backends would need to have the same inner array map entries which adds a lot of unneeded overhead. Dynamic inner array map entries can be realized by avoiding the inlined code generation for their lookup. The lookup will still be efficient since it will be calling into array_map_lookup_elem() directly and thus avoiding retpoline. The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips inline code generation and relaxes array_map_meta_equal() check to ignore both maps' max_entries. This also still allows to have faster lookups for map-in-map when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed. Example code generation where inner map is dynamic sized array: # bpftool p d x i 125 int handle__sys_enter(void * ctx): ; int handle__sys_enter(void *ctx) 0: (b4) w1 = 0 ; int key = 0; 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 ; 3: (07) r2 += -4 ; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key); 4: (18) r1 = map[id:468] 6: (07) r1 += 272 7: (61) r0 = *(u32 *)(r2 +0) 8: (35) if r0 >= 0x3 goto pc+5 9: (67) r0 <<= 3 10: (0f) r0 += r1 11: (79) r0 = *(u64 *)(r0 +0) 12: (15) if r0 == 0x0 goto pc+1 13: (05) goto pc+1 14: (b7) r0 = 0 15: (b4) w6 = -1 ; if (!inner_map) 16: (15) if r0 == 0x0 goto pc+6 17: (bf) r2 = r10 ; 18: (07) r2 += -4 ; val = bpf_map_lookup_elem(inner_map, &key); 19: (bf) r1 = r0 | No inlining but instead 20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem() ; return val ? *val : -1; | for inner array lookup. 21: (15) if r0 == 0x0 goto pc+1 ; return val ? *val : -1; 22: (61) r6 = *(u32 *)(r0 +0) ; } 23: (bc) w0 = w6 24: (95) exit Signed-off-by:
-
Daniel Borkmann authored
Add an efficient ingress to ingress netns switch that can be used out of tc BPF programs in order to redirect traffic from host ns ingress into a container veth device ingress without having to go via CPU backlog queue [0]. For local containers this can also be utilized and path via CPU backlog queue only needs to be taken once, not twice. On a high level this borrows from ipvlan which does similar switch in __netif_receive_skb_core() and then iterates via another_round. This helps to reduce latency for mentioned use cases. Pod to remote pod with redirect(), TCP_RR [1]: # percpu_netperf 10.217.1.33 RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 ) MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 ) STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 ) MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 ) P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 ) P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 ) P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 ) TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 ) Pod to remote pod with redirect_peer(), TCP_RR: # percpu_netperf 10.217.1.33 RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 ) MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 ) STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 ) MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 ) P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 ) P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 ) P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 ) TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 ) [0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf [1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperfSigned-off-by: -
Daniel Borkmann authored
Follow-up to address David's feedback that we should better describe internals of the bpf_redirect_neigh() helper. Suggested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 09 Oct, 2020 7 commits
-
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== Make two verifier improvements: - The llvm register allocator may use two different registers representing the same virtual register. Teach the verifier to recognize that. - Track bounded scalar spill/fill. The profiler[123] test in patch 3 will fail to load without patches 1 and 2. The profiler[23] test may fail to load on older llvm due to speculative code motion nd instruction combining optimizations that are fixed in https://reviews.llvm.org/D85570 v1 -> v2: - fixed 32-bit mov issue spotted by John. - allowed r2=r1; r3=r2; sequence as suggested by John. - added comments, acks, more tests. ==================== Signed-off-by:
-
Alexei Starovoitov authored
Add asm tests for register allocator tracking logic. Signed-off-by:
-
Alexei Starovoitov authored
The main purpose of the profiler test to check different llvm generation patterns to make sure the verifier can load these large programs. Note that profiler.inc.h test doesn't follow strict kernel coding style. The code was formatted in the kernel style, but variable declarations are kept as-is to preserve original llvm IR pattern. profiler1.c should pass with older and newer llvm profiler[23].c may fail on older llvm that don't have: https://reviews.llvm.org/D85570 because llvm may do speculative code motion optimization that will generate code like this: // r9 is a pointer to map_value // r7 is a scalar 17: bf 96 00 00 00 00 00 00 r6 = r9 18: 0f 76 00 00 00 00 00 00 r6 += r7 19: a5 07 01 00 01 01 00 00 if r7 < 257 goto +1 20: bf 96 00 00 00 00 00 00 r6 = r9 // r6 is used here The verifier will reject such code with the error: "math between map_value pointer and register with unbounded min value is not allowed" At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and the insn 20 undoes map_value addition. It is currently impossible for the verifier to understand such speculative pointer arithmetic. Hence llvm D85570 addresses it on the compiler side. Signed-off-by:
-
Yonghong Song authored
Under register pressure the llvm may spill registers with bounds into the stack. The verifier has to track them through spill/fill otherwise many kinds of bound errors will be seen. The spill/fill of induction variables was already happening. This patch extends this logic from tracking spill/fill of a constant into any bounded register. There is no need to track spill/fill of unbounded, since no new information will be retrieved from the stack during register fill. Though extra stack difference could cause state pruning to be less effective, no adverse affects were seen from this patch on selftests and on cilium programs. Signed-off-by:
-
Alexei Starovoitov authored
The llvm register allocator may use two different registers representing the same virtual register. In such case the following pattern can be observed: 1047: (bf) r9 = r6 1048: (a5) if r6 < 0x1000 goto pc+1 1050: ... 1051: (a5) if r9 < 0x2 goto pc+66 1052: ... 1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */ This is normal behavior of greedy register allocator. The slides 137+ explain why regalloc introduces such register copy: http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf There is no way to tell llvm 'not to do this'. Hence the verifier has to recognize such patterns. In order to track this information without backtracking allocate ID for scalars in a similar way as it's done for find_good_pkt_pointers(). When the verifier encounters r9 = r6 assignment it will assign the same ID to both registers. Later if either register range is narrowed via conditional jump propagate the register state into the other register. Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The register ID is ignored for scalars in regsafe() and doesn't affect state pruning. mark_reg_unknown() clears the ID. It's used to process call, endian and other instructions. Hence ID is explicitly cleared only in adjust_reg_min_max_vals() and in 32-bit mov. Signed-off-by:
-
Nikita V. Shirokov authored
Adding support for TCP_NOTSENT_LOWAT sockoption (https://lwn.net/Articles/560082/) in tcp bpf programs. Signed-off-by:
Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by:
-
Magnus Karlsson authored
Introduce one cache line worth of padding between the producer and consumer pointers in all the lockless rings. This so that the HW adjacency prefetcher will not prefetch the consumer pointer when the producer pointer is used and vice versa. This improves throughput performance for the l2fwd sample app with 2% on my machine with HW prefetching turned on. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
- 08 Oct, 2020 5 commits
-
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== Patch set implements logic in libbpf to auto-adjust memory size (1-, 2-, 4-, 8-bytes) of load/store (LD/ST/STX) instructions which have BPF CO-RE field offset relocation associated with it. In practice this means transparent handling of 32-bit kernels, both pointer and unsigned integers. Signed integers are not relocatable with zero-extending loads/stores, so libbpf poisons them and generates a warning. If/when BPF gets support for sign-extending loads/stores, it would be possible to automatically relocate them as well. All the details are contained in patch #2 comments and commit message. Patch #3 is a simple change in libbpf to make advanced testing with custom BTF easier. Patch #4 validates correct uses of auto-resizable loads, as well as check that libbpf fails invalid uses. Patch #1 skips CO-RE relocation for programs that had bpf_program__set_autoload(prog, false) set on them, reducing warnings and noise. v2->v3: - fix copyright (Alexei); v1->v2: - more consistent names for instruction mem size convertion routines (Alexei); - extended selftests to use relocatable STX instructions (Alexei); - added a fix for skipping CO-RE relocation for non-loadable programs. Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tony Ambardar <tony.ambardar@gmail.com> ==================== Signed-off-by: -
Andrii Nakryiko authored
Add selftests validating libbpf's auto-resizing of load/store instructions when used with CO-RE relocations. An explicit and manual approach with using bpf_core_read() is also demonstrated and tested. Separate BPF program is supposed to fail due to using signed integers of sizes that differ from kernel's sizes. To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) == sizeof(void *) == 4), selftest generates its own custom BTF and passes it as a replacement for real kernel BTF. This allows to test 32/64-bitness mix on all architectures. Signed-off-by:
-
Andrii Nakryiko authored
Use generalized BTF parsing logic, making it possible to parse BTF both from ELF file, as well as a raw BTF dump. This makes it easier to write custom tests with manually generated BTFs. Signed-off-by:
-
Andrii Nakryiko authored
Add support for patching instructions of the following form: - rX = *(T *)(rY + <off>); - *(T *)(rX + <off>) = rY; - *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}. For such instructions, if the actual kernel field recorded in CO-RE relocation has a different size than the one recorded locally (e.g., from vmlinux.h), then libbpf will adjust T to an appropriate 1-, 2-, 4-, or 8-byte loads. In general, such transformation is not always correct and could lead to invalid final value being loaded or stored. But two classes of cases are always safe: - if both local and target (kernel) types are unsigned integers, but of different sizes, then it's OK to adjust load/store instruction according to the necessary memory size. Zero-extending nature of such instructions and unsignedness make sure that the final value is always correct; - pointer size mismatch between BPF target architecture (which is always 64-bit) and 32-bit host kernel architecture can be similarly resolved automatically, because pointer is essentially an unsigned integer. Loading 32-bit pointer into 64-bit BPF register with zero extension will leave correct pointer in the register. Both cases are necessary to support CO-RE on 32-bit kernels, as `unsigned long` in vmlinux.h generated from 32-bit kernel is 32-bit, but when compiled with BPF program for BPF target it will be treated by compiler as 64-bit integer. Similarly, pointers in vmlinux.h are 32-bit for kernel, but treated as 64-bit values by compiler for BPF target. Both problems are now resolved by libbpf for direct memory reads. But similar transformations are useful in general when kernel fields are "resized" from, e.g., unsigned int to unsigned long (or vice versa). Now, similar transformations for signed integers are not safe to perform as they will result in incorrect sign extension of the value. If such situation is detected, libbpf will emit helpful message and will poison the instruction. Not failing immediately means that it's possible to guard the instruction based on kernel version (or other conditions) and make sure it's not reachable. If there is a need to read signed integers that change sizes between different kernels, it's possible to use BPF_CORE_READ_BITFIELD() macro, which works both with bitfields and non-bitfield integers of any signedness and handles sign-extension properly. Also, bpf_core_read() with proper size and/or use of bpf_core_field_size() relocation could allow to deal with such complicated situations explicitly, if not so conventiently as direct memory reads. Selftests added in a separate patch in progs/test_core_autosize.c demonstrate both direct memory and probed use cases. BPF_CORE_READ() is not changed and it won't deal with such situations as automatically as direct memory reads due to the signedness integer limitations, which are much harder to detect and control with compiler macro magic. So it's encouraged to utilize direct memory reads as much as possible. Signed-off-by: -
Andrii Nakryiko authored
Bypass CO-RE relocations step for BPF programs that are not going to be loaded. This allows to have BPF programs compiled in and disabled dynamically if kernel is not supposed to provide enough relocation information. In such case, there won't be unnecessary warnings about failed relocations. Fixes: d9297581 ("libbpf: Support disabling auto-loading BPF programs") Signed-off-by:
-
- 07 Oct, 2020 5 commits
-
-
Magnus Karlsson authored
Fix a compatibility problem when the old XDP_SHARED_UMEM mode is used together with the xsk_socket__create() call. In the old XDP_SHARED_UMEM mode, only sharing of the same device and queue id was allowed, and in this mode, the fill ring and completion ring were shared between the AF_XDP sockets. Therefore, it was perfectly fine to call the xsk_socket__create() API for each socket and not use the new xsk_socket__create_shared() API. This behavior was ruined by the commit introducing XDP_SHARED_UMEM support between different devices and/or queue ids. This patch restores the ability to use xsk_socket__create in these circumstances so that backward compatibility is not broken. Fixes: 2f6324a3 ("libbpf: Support shared umems between queues and devices") Signed-off-by:
-
Jakub Wilk authored
Reported-by:
Samanta Navarro <ferivoz@riseup.net> Signed-off-by:
Jakub Wilk <jwilk@jwilk.net> Signed-off-by:
-
Yonghong Song authored
When CONFIG_NET is not defined, I hit the following build error: kernel/trace/bpf_trace.o:(.rodata+0x110): undefined reference to `bpf_prog_test_run_raw_tp' Commit 1b4d60ec ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint") added test_run support for raw_tracepoint in /kernel/trace/bpf_trace.c. But the test_run function bpf_prog_test_run_raw_tp is defined in net/bpf/test_run.c, only available with CONFIG_NET=y. Adding a CONFIG_NET guard for .test_run = bpf_prog_test_run_raw_tp; fixed the above build issue. Fixes: 1b4d60ec ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint") Signed-off-by: -
Randy Dunlap authored
Fix build errors in kernel/bpf/verifier.c when CONFIG_NET is not enabled. ../kernel/bpf/verifier.c:3995:13: error: ‘btf_sock_ids’ undeclared here (not in a function); did you mean ‘bpf_sock_ops’? .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], ../kernel/bpf/verifier.c:3995:26: error: ‘BTF_SOCK_TYPE_SOCK_COMMON’ undeclared here (not in a function); did you mean ‘PTR_TO_SOCK_COMMON’? .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], Fixes: 1df8f55a ("bpf: Enable bpf_skc_to_* sock casting helper to networking prog type") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Hao Luo authored
Commit 4976b718 ("bpf: Introduce pseudo_btf_id") switched the order of check_subprogs() and resolve_pseudo_ldimm() in the verifier. Now an empty prog expects to see the error "last insn is not an the prog of a single invalid ldimm exit or jmp" instead, because the check for subprogs comes first. It's now pointless to validate that half of ldimm64 won't be the last instruction. Tested: # ./test_verifier Summary: 1129 PASSED, 537 SKIPPED, 0 FAILED and the full set of bpf selftests. Fixes: 4976b718 ("bpf: Introduce pseudo_btf_id") Signed-off-by:
Hao Luo <haoluo@google.com> Signed-off-by:
-
- 06 Oct, 2020 6 commits
-
-
Ciara Loftus authored
Add an option to count the number of interrupts generated per second and total number of interrupts during the lifetime of the application for a given interface. This information is extracted from /proc/interrupts. Since there is no naming convention across drivers, the user must provide the string which is specific to their interface in the /proc/interrupts file on the command line. Usage: ./xdpsock ... -I <irq_str> eg. for queue 0 of i40e device eth0: ./xdpsock ... -I i40e-eth0-TxRx-0 Signed-off-by:
Ciara Loftus <ciara.loftus@intel.com> Signed-off-by:
-
Ciara Loftus authored
Categorise and record syscalls issued in the xdpsock sample app. The categories recorded are: rx_empty_polls: polls when the rx ring is empty fill_fail_polls: polls when failed to get addr from fill ring copy_tx_sendtos: sendtos issued for tx when copy mode enabled tx_wakeup_sendtos: sendtos issued when tx ring needs waking up opt_polls: polls issued since the '-p' flag is set Print the stats using '-a' on the xdpsock command line. Signed-off-by:
-
Ciara Loftus authored
New statistics will be added in future commits. In preparation for this, let's split out the existing statistics into their own struct. Signed-off-by:
-
Yonghong Song authored
Compiling samples/bpf hits an error related to fallthrough marking. ... CC samples/bpf/hbm.o samples/bpf/hbm.c: In function ‘main’: samples/bpf/hbm.c:486:4: error: ‘fallthrough’ undeclared (first use in this function) fallthrough; ^~~~~~~~~~~ The "fallthrough" is not defined under tools/include directory. Rather, it is "__fallthrough" is defined in linux/compiler.h. Including "linux/compiler.h" and using "__fallthrough" fixed the issue. Signed-off-by: -
Yonghong Song authored
With latest llvm trunk, bpf programs under samples/bpf directory, if using CORE, may experience the following errors: LLVM ERROR: Cannot select: intrinsic %llvm.preserve.struct.access.index PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace. Stack dump: 0. Program arguments: llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF DAG->DAG Pattern Instruction Selection' on function '@bpf_prog1' #0 0x000000000183c26c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x183c26c) ... #7 0x00000000017c375e (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x17c375e) #8 0x00000000016a75c5 llvm::SelectionDAGISel::CannotYetSelect(llvm::SDNode*) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16a75c5) #9 0x00000000016ab4f8 llvm::SelectionDAGISel::SelectCodeCommon(llvm::SDNode*, unsigned char const*, unsigned int) (/data/users/yhs/work/llvm-project/llvm/build.cur/install/bin/llc+0x16ab4f8) ... Aborted (core dumped) | llc -march=bpf -filetype=obj -o samples/bpf/test_probe_write_user_kern.o The reason is due to llvm change https://reviews.llvm.org/D87153 where the CORE relocation global generation is moved from the beginning of target dependent optimization (llc) to the beginning of target independent optimization (opt). Since samples/bpf programs did not use vmlinux.h and its clang compilation uses native architecture, we need to adjust arch triple at opt level to do CORE relocation global generation properly. Otherwise, the above error will appear. This patch fixed the issue by introduce opt and llvm-dis to compilation chain, which will do proper CORE relocation global generation as well as O2 level optimization. Tested with llvm10, llvm11 and trunk/llvm12. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20201006043427.1891742-1-yhs@fb.com
-
Luigi Rizzo authored
bpf_program__set_attach_target(prog, fd, ...) will always fail when fd = 0 (attach to a kernel symbol) because obj->btf_vmlinux is NULL and there is no way to set it (at the moment btf_vmlinux is meant to be temporary storage for use in bpf_object__load_xattr()). Fix this by using libbpf_find_vmlinux_btf_id(). At some point we may want to opportunistically cache btf_vmlinux so it can be reused with multiple programs. Signed-off-by:
Luigi Rizzo <lrizzo@google.com> Signed-off-by:
Petar Penkov <ppenkov@google.com> Link: https://lore.kernel.org/bpf/20201005224528.389097-1-lrizzo@google.com
-
