- 07 Dec, 2016 2 commits
-
-
Josh Boyer authored
UEFI machines can be booted in Secure Boot mode. Add a EFI_SECURE_BOOT bit that can be passed to efi_enabled() to find out whether secure boot is enabled. This will be used by the SysRq+x handler, registered by the x86 arch, to find out whether secure boot mode is enabled so that it can be disabled. Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Josh Boyer authored
A user can manually tell the shim boot loader to disable validation of images it loads. When a user does this, it creates a UEFI variable called MokSBState that does not have the runtime attribute set. Given that the user explicitly disabled validation, we can honor that and not enable secure boot mode if that variable is set. Signed-off-by:
-
- 01 Dec, 2016 5 commits
-
-
David Howells authored
Get the firmware's secure-boot status in the kernel boot wrapper and stash it somewhere that the main kernel image can find. The efi_get_secureboot() function is extracted from the arm stub and (a) generalised so that it can be called from x86 and (b) made to use efi_call_runtime() so that it can be run in mixed-mode. Suggested-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
David Howells authored
Add the definitions for shim and image security database, both of which are used widely in various Linux distros. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
David Howells authored
efi_call_runtime() is provided for x86 to be able abstract mixed mode support. Provide this for ARM also so that common code work in mixed mode also. Suggested-by:
-
David Howells authored
Provide the ability to perform mixed-mode runtime service calls for x86 in the same way that commit 0a637ee6 ("x86/efi: Allow invocation of arbitrary boot services") provides the ability to invoke arbitrary boot services. Suggested-by:
-
Ard Biesheuvel authored
Instead of using void pointers, and casting them to correctly typed function pointers upon use, declare the runtime services pointers as function pointers using their respective prototypes, for which typedefs are already available. Signed-off-by:
-
- 25 Nov, 2016 1 commit
-
-
Ard Biesheuvel authored
The UEFI stub executes in the context of the firmware, which identity maps the available system RAM, which implies that only memory below 4 GB can be used for allocations on 32-bit architectures, even on [L]PAE capable hardware. So ignore any reported memory above 4 GB in efi_random_alloc(). This also fixes a reported build problem on ARM under -Os, where the 64-bit logical shift relies on a software routine that the ARM decompressor does not provide. A second [minor] issue is also fixed, where the '+ 1' is moved out of the shift, where it belongs: the reason for its presence is that a memory region where start == end should count as a single slot, given that 'end' takes the desired size and alignment of the allocation into account. To clarify the code in this regard, rename start/end to 'first_slot' and 'last_slot', respectively, and introduce 'region_end' to describe the last usable address of the current region. Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 18 Nov, 2016 2 commits
-
-
Lukas Wunner authored
So far Thunderbolt is (unfortunately) an Intel proprietary technology that is only available on x86, so compiling on other arches is pointless except for testing purposes. Amend Kconfig accordingly. Suggested-by:
-
Lukas Wunner authored
Since commit c9cc3aaa ("thunderbolt: Use Device ROM retrieved from EFI"), the THUNDERBOLT config option selects APPLE_PROPERTIES. This broke the build for certain configs because APPLE_PROPERTIES is located in a menu which depends on EFI: If EFI is not enabled, the prerequisites needed for APPLE_PROPERTIES are not selected: Those are EFI_DEV_PATH_PARSER and UCS2_STRING. Additionally EFI_DEV_PATH_PARSER won't compile unless ACPI is enabled. Commit 79f9cd35 ("thunderbolt, efi: Fix Kconfig dependencies") sought to fix the breakage by making THUNDERBOLT select APPLE_PROPERTIES only if EFI_STUB is enabled. On x86, EFI_STUB depends on EFI and EFI depends on ACPI, so this fixed the build at least on this architecture. However on arm and arm64, EFI_STUB does not depend on EFI, so once again the prerequisites needed for APPLE_PROPERTIES are not selected. Additionally ACPI is not available on arm and optional on arm64, therefore EFI_DEV_PATH_PARSER won't compile. Fix by selecting APPLE_PROPERTIES only on x86. Suggested-by:
-
- 15 Nov, 2016 1 commit
-
-
Lukas Wunner authored
Fix this EFI build failure on certain (rand)configs: drivers/firmware/efi/apple-properties.c:149:9: error: implicit declaration of function ???efi_get_device_by_path??? [-Werror=implicit-function-declaration] which is due to: warning: (THUNDERBOLT) selects APPLE_PROPERTIES which has unmet direct dependencies (EFI && EFI_STUB && X86) Signed-off-by:
-
- 13 Nov, 2016 10 commits
-
-
Lukas Wunner authored
Macs with Thunderbolt 1 do not have a unit-specific DROM: The DROM is empty with uid 0x1000000000000. (Apple started factory-burning a unit- specific DROM with Thunderbolt 2.) Instead, the NHI EFI driver supplies a DROM in a device property. Use it if available. It's only available when booting with the efistub. If it's not available, silently fall back to our hardcoded DROM. The size of the DROM is always 256 bytes. The number is hardcoded into the NHI EFI driver. This commit can deal with an arbitrary size however, just in case they ever change that. Background information: The EFI firmware volume contains ROM files for the NHI, GMUX and several other chips as well as key material. This strategy allows Apple to deploy ROM or key updates by simply publishing an EFI firmware update on their website. Drivers do not access those files directly but rather through a file server via EFI protocol AC5E4829-A8FD-440B-AF33-9FFE013B12D8. Files are identified by GUID, the NHI DROM has 339370BD-CFC6-4454-8EF7-704653120818. The NHI EFI driver amends that file with a unit-specific uid. The uid has 64 bit but its entropy is much lower: 24 bit represent the model, 24 bit are taken from a serial number, 16 bit are fixed. The NHI EFI driver obtains the serial number via the DataHub protocol, copies it into the DROM, calculates the CRC and submits the result as a device property. A modification is needed in the resume code where we currently read the uid of all switches in the hierarchy to detect plug events that occurred during sleep. On Thunderbolt 1 root switches this will now lead to a mismatch between the uid of the empty DROM and the EFI DROM. Exempt the root switch from this check: It's built in, so the uid should never change. However we continue to *read* the uid of the root switch, this seems like a good way to test its reachability after resume. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Acked-by:
Andreas Noever <andreas.noever@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Vilaça <reverser@put.as> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-10-matt@codeblueprint.co.ukSigned-off-by:
-
Lukas Wunner authored
Apple's EFI drivers supply device properties which are needed to support Macs optimally. They contain vital information which cannot be obtained any other way (e.g. Thunderbolt Device ROM). They're also used to convey the current device state so that OS drivers can pick up where EFI drivers left (e.g. GPU mode setting). There's an EFI driver dubbed "AAPL,PathProperties" which implements a per-device key/value store. Other EFI drivers populate it using a custom protocol. The macOS bootloader /System/Library/CoreServices/boot.efi retrieves the properties with the same protocol. The kernel extension AppleACPIPlatform.kext subsequently merges them into the I/O Kit registry (see ioreg(8)) where they can be queried by other kernel extensions and user space. This commit extends the efistub to retrieve the device properties before ExitBootServices is called. It assigns them to devices in an fs_initcall so that they can be queried with the API in <linux/property.h>. Note that the device properties will only be available if the kernel is booted with the efistub. Distros should adjust their installers to always use the efistub on Macs. grub with the "linux" directive will not work unless the functionality of this commit is duplicated in grub. (The "linuxefi" directive should work but is not included upstream as of this writing.) The custom protocol has GUID 91BD12FE-F6C3-44FB-A5B7-5122AB303AE0 and looks like this: typedef struct { unsigned long version; /* 0x10000 */ efi_status_t (*get) ( IN struct apple_properties_protocol *this, IN struct efi_dev_path *device, IN efi_char16_t *property_name, OUT void *buffer, IN OUT u32 *buffer_len); /* EFI_SUCCESS, EFI_NOT_FOUND, EFI_BUFFER_TOO_SMALL */ efi_status_t (*set) ( IN struct apple_properties_protocol *this, IN struct efi_dev_path *device, IN efi_char16_t *property_name, IN void *property_value, IN u32 property_value_len); /* allocates copies of property name and value */ /* EFI_SUCCESS, EFI_OUT_OF_RESOURCES */ efi_status_t (*del) ( IN struct apple_properties_protocol *this, IN struct efi_dev_path *device, IN efi_char16_t *property_name); /* EFI_SUCCESS, EFI_NOT_FOUND */ efi_status_t (*get_all) ( IN struct apple_properties_protocol *this, OUT void *buffer, IN OUT u32 *buffer_len); /* EFI_SUCCESS, EFI_BUFFER_TOO_SMALL */ } apple_properties_protocol; Thanks to Pedro Vilaça for this blog post which was helpful in reverse engineering Apple's EFI drivers and bootloader: https://reverse.put.as/2016/06/25/apple-efi-firmware-passwords-and-the-scbo-myth/ If someone at Apple is reading this, please note there's a memory leak in your implementation of the del() function as the property struct is freed but the name and value allocations are not. Neither the macOS bootloader nor Apple's EFI drivers check the protocol version, but we do to avoid breakage if it's ever changed. It's been the same since at least OS X 10.6 (2009). The get_all() function conveniently fills a buffer with all properties in marshalled form which can be passed to the kernel as a setup_data payload. The number of device properties is dynamic and can change between a first invocation of get_all() (to determine the buffer size) and a second invocation (to retrieve the actual buffer), hence the peculiar loop which does not finish until the buffer size settles. The macOS bootloader does the same. The setup_data payload is later on unmarshalled in an fs_initcall. The idea is that most buses instantiate devices in "subsys" initcall level and drivers are usually bound to these devices in "device" initcall level, so we assign the properties in-between, i.e. in "fs" initcall level. This assumes that devices to which properties pertain are instantiated from a "subsys" initcall or earlier. That should always be the case since on macOS, AppleACPIPlatformExpert::matchEFIDevicePath() only supports ACPI and PCI nodes and we've fully scanned those buses during "subsys" initcall level. The second assumption is that properties are only needed from a "device" initcall or later. Seems reasonable to me, but should this ever not work out, an alternative approach would be to store the property sets e.g. in a btree early during boot. Then whenever device_add() is called, an EFI Device Path would have to be constructed for the newly added device, and looked up in the btree. That way, the property set could be assigned to the device immediately on instantiation. And this would also work for devices instantiated in a deferred fashion. It seems like this approach would be more complicated and require more code. That doesn't seem justified without a specific use case. For comparison, the strategy on macOS is to assign properties to objects in the ACPI namespace (AppleACPIPlatformExpert::mergeEFIProperties()). That approach is definitely wrong as it fails for devices not present in the namespace: The NHI EFI driver supplies properties for attached Thunderbolt devices, yet on Macs with Thunderbolt 1 only one device level behind the host controller is described in the namespace. Consequently macOS cannot assign properties for chained devices. With Thunderbolt 2 they started to describe three device levels behind host controllers in the namespace but this grossly inflates the SSDT and still fails if the user daisy-chained more than three devices. We copy the property names and values from the setup_data payload to swappable virtual memory and afterwards make the payload available to the page allocator. This is just for the sake of good housekeeping, it wouldn't occupy a meaningful amount of physical memory (4444 bytes on my machine). Only the payload is freed, not the setup_data header since otherwise we'd break the list linkage and we cannot safely update the predecessor's ->next link because there's no locking for the list. The payload is currently not passed on to kexec'ed kernels, same for PCI ROMs retrieved by setup_efi_pci(). This can be added later if there is demand by amending setup_efi_state(). The payload can then no longer be made available to the page allocator of course. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by: -
Lukas Wunner authored
We already have a macro to invoke boot services which on x86 adapts automatically to the bitness of the EFI firmware: efi_call_early(). The macro allows sharing of functions across arches and bitness variants as long as those functions only call boot services. However in practice functions in the EFI stub contain a mix of boot services calls and protocol calls. Add an efi_call_proto() macro for bitness-agnostic protocol calls to allow sharing more code across arches as well as deduplicating 32 bit and 64 bit code paths. On x86, implement it using a new efi_table_attr() macro for bitness- agnostic table lookups. Refactor efi_call_early() to make use of the same macro. (The resulting object code remains identical.) Signed-off-by:
-
Lukas Wunner authored
We're about to extended the efistub to retrieve device properties from EFI on Apple Macs. The properties use EFI Device Paths to indicate the device they belong to. This commit adds a parser which, given an EFI Device Path, locates the corresponding struct device and returns a reference to it. Initially only ACPI and PCI Device Path nodes are supported, these are the only types needed for Apple device properties (the corresponding macOS function AppleACPIPlatformExpert::matchEFIDevicePath() does not support any others). Further node types can be added with little to moderate effort. Apple device properties is currently the only use case of this parser, but Peter Jones intends to use it to match up devices with the ConInDev/ConOutDev/ErrOutDev variables and add sysfs attributes to these devices to say the hardware supports using them as console. Thus, make this parser a separate component which can be selected with config option EFI_DEV_PATH_PARSER. It can in principle be compiled as a module if acpi_get_first_physical_node() and acpi_bus_type are exported (and efi_get_device_by_path() itself is exported). The dependency on CONFIG_ACPI is needed for acpi_match_device_ids(). It can be removed if an empty inline stub is added for that function. Signed-off-by:
-
Ard Biesheuvel authored
Invoke the EFI_RNG_PROTOCOL protocol in the context of the stub and install the Linux-specific RNG seed UEFI config table. This will be picked up by the EFI routines in the core kernel to seed the kernel entropy pool. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-6-matt@codeblueprint.co.ukSigned-off-by:
-
Ard Biesheuvel authored
Make random.c build for ARM by moving the fallback definition of EFI_ALLOC_ALIGN to efistub.h, and replacing a division by a value we know to be a power of 2 with a right shift (this is required since ARM does not have any integer division helper routines in its decompressor) Signed-off-by:
-
Ard Biesheuvel authored
Specify a Linux specific UEFI configuration table that carries some random bits, and use the contents during early boot to seed the kernel's random number generator. This allows much strong random numbers to be generated early on. The entropy is fed to the kernel using add_device_randomness(), which is documented as being appropriate for being called very early. Since UEFI configuration tables may also be consumed by kexec'd kernels, register a reboot notifier that updates the seed in the table. Note that the config table could be generated by the EFI stub or by any other UEFI driver or application (e.g., GRUB), but the random seed table GUID and the associated functionality should be considered an internal kernel interface (unless it is promoted to ABI later on) Signed-off-by:
-
Ard Biesheuvel authored
Since I will be co-maintaining the EFI subsystem, it makes sense to mention the ARM and arm64 EFI bits in the EFI section in MAINTAINERS so that Matt, the list and I get cc'ed on proposed changes. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: M: Matthew Garrett <matthew.garrett@nebula.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-3-matt@codeblueprint.co.ukSigned-off-by:
-
Roy Franz authored
Adjust the size used in calculations to match the actual size of allocation that will be performed based on EFI size/alignment constraints. efi_high_alloc() and efi_low_alloc() use the passed size in bytes directly to find space in the memory map for the allocation, rather than the actual allocation size that has been adjusted for size and alignment constraints. This results in failed allocations and retries in efi_high_alloc(). The same error is present in efi_low_alloc(), although failure will only happen if the lowest memory block is small. Also use EFI_PAGE_SIZE consistently and remove use of EFI_PAGE_SHIFT to calculate page size. Signed-off-by:
Roy Franz <roy.franz@hpe.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 12 Nov, 2016 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Fix a recent regression in the 8250_dw serial driver introduced by adding a quirk for the APM X-Gene SoC to it which uncovered an issue related to the handling of built-in device properties in the core ACPI device enumeration code (Heikki Krogerus)" * tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / platform: Add support for build-in properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix two bugs in error code paths in the PM core (system-wide suspend of devices), a device reference leak in the boot-time suspend test code and a cpupower utility regression from the 4.7 cycle. Specifics: - Prevent the PM core from attempting to suspend parent devices if any of their children, whose suspend callbacks were invoked asynchronously, have failed to suspend during the "late" and "noirq" phases of system-wide suspend of devices (Brian Norris). - Prevent the boot-time system suspend test code from leaking a reference to the RTC device used by it (Johan Hovold). - Fix cpupower to use the return value of one of its library functions correctly and restore the correct behavior of it when used for setting cpufreq tunables broken during the 4.7 development cycle (Laura Abbott)" * tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails PM / sleep: fix device reference leak in test_suspend cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set -
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - mmap handler for dma ops as generic handler no longer works for us [Alexey] - Fixes for EZChip platform [Noam] - Fix RTC clocksource driver build issue - ARC IRQ handling fixes [Yuriy] - Revert a recent makefile change which doesn't go well with oldish tools out in the wild * tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core ARC: IRQ: Do not use hwirq as virq and vice versa ARC: [plat-eznps] set default baud for early console ARC: [plat-eznps] remove IPI clear from SMP operations Revert "ARC: build: retire old toggles" ARC: timer: rtc: implement read loop in "C" vs. inline asm ARC: change return value of userspace cmpxchg assist syscall arc: Implement arch-specific dma_map_ops.mmap ARC: [SMP] avoid overriding present cpumask ARC: Enable PERF_EVENTS in nSIM driven platforms
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to avoid loading on non-toshiba systems. Documentation/ABI: - ibm_rtl: The "What:" fields are incomplete toshiba-wmi: - Fix loading the driver on non Toshiba laptops ideapad-laptop: - Add another DMI entry for Yoga 900" * tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Documentation/ABI: ibm_rtl: The "What:" fields are incomplete toshiba-wmi: Fix loading the driver on non Toshiba laptops ideapad-laptop: Add another DMI entry for Yoga 900
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two small (really, one liners both of them!) fixes that should go into this series: - Request allocation error handling fix for nbd, from Christophe, fixing a regression in this series. - An oops fix for drbd. Not a regression in this series, but stable material. From Richard" * 'for-linus' of git://git.kernel.dk/linux-block: drbd: Fix kernel_sendmsg() usage - potential NULL deref nbd: Fix error handling -
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Update MAINTAINERS for Intel VMD driver filename - Update Rockchip rk3399 host bridge driver DTS and resets - Fix ROM shadow problem that made some video device initialization fail * tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: VMD: Update filename to reflect move arm64: dts: rockchip: add three new resets for rk3399 PCIe controller PCI: rockchip: Add three new resets as required properties PCI: Don't attempt to claim shadow copies of ROM
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "AMD, radeon, i915, imx, msm and udl fixes: - amdgpu/radeon have a number of power management regressions and fixes along with some better error checking - imx has a single regression fix - udl has a single kmalloc instead of stack for usb control msg fix - msm has some fixes for modesetting bugs and regressions - i915 has a one fix for a Sandybridge regression along with some others for DP audio. They all seem pretty okay at this stage, we've got one MST fix I know going through process for i915, but I expect it'll be next week" * tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/udl: make control msg static const. (v2) drm/amd/powerplay: implement get_clock_by_type for iceland. drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk drm/imx: disable planes before DC drm/amd/powerplay: return false instead of -EINVAL drm/amdgpu/powerplay/smu7: fix unintialized data usage drm/amdgpu: fix crash in acp_hw_fini drm/i915: Limit Valleyview and earlier to only using mappable scanout drm/i915: Round tile chunks up for constructing partial VMAs drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms drm/i915/dp: BDW cdclk fix for DP audio drm/i915/vlv: Prevent enabling hpd polling in late suspend drm/i915: Respect alternate_ddc_pin for all DDI ports drm/msm: Fix error handling crashes seen when VRAM allocation fails drm/msm/mdp5: 8x16 actually has 8 mixer stages drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 drm/msm/mdp5: handle non-fullscreen base plane case drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix mmc card initialization for hosts not supporting HW busy detection - Fix mmc_test for sending commands during non-blocking write MMC host: - mxs: Avoid using an uninitialized - sdhci: Restore enhanced strobe setting during runtime resume - sdhci: Fix a couple of reset related issues - dw_mmc: Fix a reset controller issue" * tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxs: Initialize the spinlock prior to using it mmc: mmc: Use 500ms as the default generic CMD6 timeout mmc: mmc_test: Fix "Commands during non-blocking write" tests mmc: sdhci: Fix missing enhanced strobe setting during runtime resume mmc: sdhci: Reset cmd and data circuits after tuning failure mmc: sdhci: Fix unexpected data interrupt handling mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer mmc: dw_mmc: add the "reset" as name of reset controller Documentation: synopsys-dw-mshc: add binding for reset-names -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "All is about drivers, no core business going on. - Fix a host of runtime problems with the Intel Cherryview driver: suspend/resume needs to be marshalled properly, and strange effects from BIOS interaction during suspend/resume need to be dealt with. - A single bit was being set wrong in the Aspeed driver. - Fix an iProc probe ordering fallout resulting from v4.9 refactorings for bus population. - Do not specify a default trigger in the ST Micro cascaded GPIO IRQ controller: the kernel will moan. - Make IRQs optional altogether on the STM32 driver, it turns out not all systems have them or want them. - Fix a re-probe bug in the i.MX driver, it will eventually crash if probed repeatedly, not good" * tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl-aspeed-g5: Never set SCU90[6] pinctrl: cherryview: Prevent possible interrupt storm on resume pinctrl: cherryview: Serialize register access in suspend/resume pinctrl: imx: reset group index on probe pinctrl: stm32: move gpio irqs binding to optional pinctrl: stm32: remove dependency with interrupt controller pinctrl: st: don't specify default interrupt trigger pinctrl: iproc: Fix iProc and NSP GPIO support
-
- 11 Nov, 2016 10 commits
-
-
Rafael J. Wysocki authored
* pm-tools-fixes: cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set * pm-sleep-fixes: PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails PM / sleep: fix device reference leak in test_suspend -
Rafael J. Wysocki authored
* device-properties: ACPI / platform: Add support for build-in properties
-
Linus Torvalds authored
Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann: "It took a while for some patches to make it into mainline through maintainer trees, but the 28-patch series is now reduced to 10, with one tiny patch added at the end. Aside from patches that are no longer required, I did these changes compared to version 1: - Dropped "iio: maxim_thermocouple: detect invalid storage size in read()", which is currently in linux-next as commit 32cb7d27. This is the only remaining warning I see for a couple of corner cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc bot both report it on arm64) - Dropped "brcmfmac: avoid maybe-uninitialized warning in brcmf_cfg80211_start_ap", which is currently in net/master merge pending. - Dropped two x86 patches, "x86: math-emu: possible uninitialized variable use" and "x86: mark target address as output in 'insb' asm" as they do not seem to trigger for a default build, and I got no feedback on them. Both of these are ancient issues and seem harmless, I will send them again to the x86 maintainers once the rest is merged. - Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on feedback from Ilya Dryomov, who already has a different fix queued up for v4.10. The kbuild bot reports this as a warning for xtensa. - Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with a simpler patch, this one always triggers but my first solution would not be safe for linux-4.9 any more at this point. I'll follow up with the larger patch as a cleanup for 4.10. - Replaced "dib0700: fix nec repeat handling" with a better one, contributed by Sean Young" * -Wmaybe-uninitialized fixes: Kbuild: enable -Wmaybe-uninitialized warnings by default pcmcia: fix return value of soc_pcmcia_regulator_set infiniband: shut up a maybe-uninitialized warning crypto: aesni: shut up -Wmaybe-uninitialized warning rc: print correct variable for z8f0811 dib0700: fix nec repeat handling s390: pci: don't print uninitialized data for debugging nios2: fix timer initcall return value x86: apm: avoid uninitialized data NFSv4.1: work around -Wmaybe-uninitialized warning Kbuild: enable -Wmaybe-uninitialized warning for "make W=1" -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/stackdepot: export save/fetch stack for drivers mm: kmemleak: scan .data.ro_after_init memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB coredump: fix unfreezable coredumping task mm/filemap: don't allow partially uptodate page for pipes mm/hugetlb: fix huge page reservation leak in private mapping error paths ocfs2: fix not enough credit panic Revert "console: don't prefer first registered if DT specifies stdout-path" mm: hwpoison: fix thp split handling in memory_failure() swapfile: fix memory corruption via malformed swapfile mm/cma.c: check the max limit for cma allocation scripts/bloat-o-meter: fix SIGPIPE shmem: fix pageflags after swapping DMA32 object mm, frontswap: make sure allocated frontswap map is assigned mm: remove extra newline from allocation stall warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Christoph's and Jan's aio fixes, fixup for generic_file_splice_read (removal of pointless detritus that actually breaks it when used for gfs2 ->splice_read()) and fixup for generic_file_read_iter() interaction with ITER_PIPE destinations." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: splice: remove detritus from generic_file_splice_read() mm/filemap: don't allow partially uptodate page for pipes aio: fix freeze protection of aio writes fs: remove aio_run_iocb fs: remove the never implemented aio_fsync file operation aio: hold an extra file reference over AIO read/write operations
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Ilya Dryomov: "Ceph's ->read_iter() implementation is incompatible with the new generic_file_splice_read() code that went into -rc1. Switch to the less efficient default_file_splice_read() for now; the proper fix is being held for 4.10. We also have a fix for a 4.8 regression and a trival libceph fixup" * tag 'ceph-for-4.9-rc5' of git://github.com/ceph/ceph-client: libceph: initialize last_linger_id with a large integer libceph: fix legacy layout decode with pool 0 ceph: use default file splice read callback
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "Most of these fix regressions in 4.9, and none are going to stable this time around. Bugfixes: - Trim extra slashes in v4 nfs_paths to fix tools that use this - Fix a -Wmaybe-uninitialized warnings - Fix suspicious RCU usages - Fix Oops when mounting multiple servers at once - Suppress a false-positive pNFS error - Fix a DMAR failure in NFS over RDMA" * tag 'nfs-for-4.9-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: xprtrdma: Fix DMAR failure in frwr_op_map() after reconnect fs/nfs: Fix used uninitialized warn in nfs4_slot_seqid_in_use() NFS: Don't print a pNFS error if we aren't using pNFS NFS: Ignore connections that have cl_rpcclient uninitialized SUNRPC: Fix suspicious RCU usage NFSv4.1: work around -Wmaybe-uninitialized warning NFS: Trim extra slash in v4 nfs_path
-
Linus Torvalds authored
Merge tag 'xfs-fixes-for-linus-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fix from Dave Chinner: "This is a fix for an unmount hang (regression) when the filesystem is shutdown. It was supposed to go to you for -rc3, but I accidentally tagged the commit prior to it in that pullreq. Summary: - fix for aborting deferred transactions on filesystem shutdown" * tag 'xfs-fixes-for-linus-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: defer should abort intent items if the trans roll fails
-
Arnd Bergmann authored
Previously the warnings were added back at the W=1 level and above, this now turns them on again by default, assuming that we have addressed all warnings and again have a clean build for v4.10. I found a number of new warnings in linux-next already and submitted bugfixes for those. Hopefully they are caught by the 0day builder in the future as soon as this patch is merged. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
The newly introduced soc_pcmcia_regulator_set() function sometimes returns without setting its return code, as shown by this warning: drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set': drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes it to propagate the regulator_disable() result instead. Fixes: ac61b600 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by:
-
