- 05 Dec, 2009 40 commits
-
-
Mike Isely authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
The device text description in pvrusb2-devattr.c get mapped into a V4L API string field that is unfortunately shorter than I expected. No sense fighting City Hall here - this change shortens the descriptions to fit the limit. Signed-off-by:
-
Mike Isely authored
This pvrusb2 change is in support of an existing feature used to help identify and locate newer vendor supplied firmware. This change makes the feature work for the newer larger firmware size. Signed-off-by:
-
Mike Isely authored
New FX2 firmware from Hauppauge is no longer 8KB in size - it's 16KB. This is true for HVR-1950 and HVR-1900 devices. Without this change, new pvrusb2 users with that hardware are unable to use the driver (because the CD shipped with the hardware only has the 16KB firmware). Signed-off-by:
-
Igor M. Liplianin authored
The new hardware design applied for this cards. Silicon Labs C8051F300 microcontroller is used for LNB power control. It connected to cx23885 GPIO pins: GPIO0 - P0.3 data GPIO1 - P0.2 reset GPIO2 - P0.1 clk GPIO3 - P0.0 busy Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner and M88DS3000 advanced DVB-S/S2 demodulator. Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Hans Verkuil authored
Fix this trivial compile warning: v4l/atbm8830.c:164: warning: 'set_agc_config' defined but not used Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Fix this trivial compile warning: v4l/cxusb.c:1195: warning: unused variable 'n' Signed-off-by:
-
Hans Verkuil authored
The cx18 av core implemented an init call for no good reason. It's now turned into an internal function. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
It was really confusing to have media-specs, v4l2-spec and dvb-spec. So this patch removes v4l2-spec and dvb-spec. The docs in dvb-spec and the V4L1_API.html file were moved to media-specs/old-docs. Removed all references to v4l2-spec and dvb-spec. Signed-off-by:
-
Vaibhav Hiremath authored
Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Vaibhav Hiremath authored
Signed-off-by:
-
Vaibhav Hiremath authored
Added support for Control IOCTL, - s_ctrl - g_ctrl - queryctrl Signed-off-by: -
Vaibhav Hiremath authored
Signed-off-by:
-
Vaibhav Hiremath authored
Signed-off-by:
-
Vaibhav Hiremath authored
Signed-off-by:
-
Vaibhav Hiremath authored
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. Signed-off-by:
-
Vaibhav Hiremath authored
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. Signed-off-by:
-
Vaibhav Hiremath authored
Signed-off-by:
-
Hans Verkuil authored
[mchehab@redhat.com: fix the wrong videodev2.h.xml file] Signed-off-by:
-
Pete Eberlein authored
This adds a struct v4l2_device to the go7007 device struct and registers it during v4l2 initialization. The v4l2_device registration overwrites the go->dev device_data, which is a struct usb_interface with intfdata set to the struct go7007. This changes intfdata to point to the struct v4l2_device inside struct go7007, which is what v4l2_device_register will also set it to (and warn about non-null drvdata on register.) Since usb disconnect can happen any time, this intfdata should always be present. Signed-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Andy Walls authored
Avoid legacy IR I2C probing for PVR-150, PVR-500, and PVR-350 cards. This still probes, but restricts the possbile addresses probed per card. Also removed legacy probe addresses for the KNC and PixelView cards which are not supported by ivtv as far as I know. Signed-off-by:
-
Andy Walls authored
This change creates per cx18 instances of IR_i2c_init_data for handing over initialization data to ir-kbd-i2c, since that module wants non-const data even though it never modifies the data. Signed-off-by:
-
Andy Walls authored
Add explicit support for the AVerTV M116 for use with the ir-kbd-i2c module. This also eases future support for other AVerMedia ivtv boards with the same microcontroller program at I2C address 0x40. This is a reworked version of an earlier patch that was... Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Andy Walls authored
This avoids collisions of legacy IR controller probing with known I2C devices in the card definitions in ivtv-cards.c. I2C driver modules for device listed explicitly in a card definition should always take precedence over a probe guessing where and IR controller may be. Reviewed-by:
-
Andy Walls authored
Add a module parameter to adjust I2C SCL clock period per board. This allows some experimental fine tuning by end users to overcome quirky I2C device problems. Reported-by:
"Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com> Signed-off-by:
-
Aleksandr V. Piskunov authored
Signed-off-by:
Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Signed-off-by:
-
Andy Walls authored
Add an AVerMedia M113 variant that was... Reported-by:
Hiemanshu Sharma <hiemanshu@fedoraproject.org> Signed-off-by:
-
