- 22 Nov, 2019 17 commits
-
-
Bruce Allan authored
Firmware always returns 8 as the max number of supported TCs. However on devices with more than 4 ports, the maximum number of TCs per port is limited to 4. Check and, if necessary, correct the reporting of capabilities for devices with more than 4 ports. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Store the number of functions the device has and use this number when setting safe mode capabilities instead of calculating it. Signed-off-by:
Kevin Scott <kevin.c.scott@intel.com> Signed-off-by:
-
Chen Wandun authored
Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Mayer authored
End.DT6 behavior makes use of seg6_lookup_nexthop() function which drops all packets that are destined to be locally processed. However, DT* should be able to deliver decapsulated packets that are destined to local addresses. Function seg6_lookup_nexthop() is also used by DX6, so in order to maintain compatibility I created another routing helper function which is called seg6_lookup_any_nexthop(). This function is able to take into account both packets that have to be processed locally and the ones that are destined to be forwarded directly to another machine. Hence, seg6_lookup_any_nexthop() is used in DT6 rather than seg6_lookup_nexthop() to allow local delivery. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
-
Petr Machata authored
In commit a82055af ("netfilter: nft_payload: add VLAN offload support"), VLAN fields in struct flow_dissector_key_vlan were unionized with the intention of introducing another field that covered the whole TCI header. However without a wrapping struct the subfields end up sharing the same bits. As a result, "tc filter add ... flower vlan_id 14" specifies not only vlan_id, but also vlan_priority. Fix by wrapping the individual VLAN fields in a struct. Fixes: a82055af ("netfilter: nft_payload: add VLAN offload support") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-net-next-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== The interesting new thing here is AQL, the Airtime Queue Limit patchset from Kan Yan (Google) and Toke Høiland-Jørgensen (Redhat). The effect is intended to eventually be similar to BQL, but byte queue limits are not useful in wifi where the actual throughput can vary by around 4 orders of magnitude. There are more details in the patches themselves. ==================== Signed-off-by:
-
Tuong Lien authored
It is observed that TIPC service binding order will not be kept in the publication event report to user if the service is subscribed after the bindings. For example, services are bound by application in the following order: Server: bound port A to {18888,66,66} scope 2 Server: bound port A to {18888,33,33} scope 2 Now, if a client subscribes to the service range (e.g. {18888, 0-100}), it will get the 'TIPC_PUBLISHED' events in that binding order only when the subscription is started before the bindings. Otherwise, if started after the bindings, the events will arrive in the opposite order: Client: received event for published {18888,33,33} Client: received event for published {18888,66,66} For the latter case, it is clear that the bindings have existed in the name table already, so when reported, the events' order will follow the order of the rbtree binding nodes (- a node with lesser 'lower'/'upper' range value will be first). This is correct as we provide the tracking on a specific service status (available or not), not the relationship between multiple services. However, some users expect to see the same order of arriving events irrespective of when the subscription is issued. This turns out to be easy to fix. We now add functionality to ensure that publication events always are issued in the same temporal order as the corresponding bindings were performed. v2: replace the unnecessary macro - 'publication_after()' with inline function. v3: reuse 'time_after32()' instead of reinventing the same exact code. Acked-by:Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Hoang Le authored
When setting up a cluster with non-replicast/replicast capability supported. This capability will be disabled for broadcast send link in order to be backwards compatible. However, when these non-support nodes left and be removed out the cluster. We don't update this capability on broadcast send link. Then, some of features that based on this capability will also disabling as unexpected. In this commit, we make sure the broadcast send link capabilities will be re-calculated as soon as a node removed/rejoined a cluster. Acked-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Toke Høiland-Jørgensen authored
The previous commit added the ability to throttle stations when they queue too much airtime in the hardware. This commit enables the functionality by calculating the expected airtime usage of each packet that is dequeued from the TXQs in mac80211, and accounting that as pending airtime. The estimated airtime for each skb is stored in the tx_info, so we can subtract the same amount from the running total when the skb is freed or recycled. The throttling mechanism relies on this accounting to be accurate (i.e., that we are not freeing skbs without subtracting any airtime they were accounted for), so we put the subtraction into ieee80211_report_used_skb(). As an optimisation, we also subtract the airtime on regular TX completion, zeroing out the value stored in the packet afterwards, to avoid having to do an expensive lookup of the station from the packet data on every packet. This patch does *not* include any mechanism to wake a throttled TXQ again, on the assumption that this will happen anyway as a side effect of whatever freed the skb (most commonly a TX completion). Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-5-kyan@google.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Kan Yan authored
In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by:
Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by:
-
Toke Høiland-Jørgensen authored
Felix recently added code to calculate airtime of packets to the mt76 driver. Import this into mac80211 so we can use it for airtime queue limit calculations. The airtime.c file is copied verbatim from the mt76 driver, and adjusted to be usable in mac80211. This involves: - Switching to mac80211 data structures. - Adding support for 160 MHz channels and HE mode. - Moving the symbol and duration calculations around a bit to avoid rounding with the higher rates and longer symbol times used for HE rates. The per-rate TX rate calculation is also split out to its own function so it can be used directly for the AQL calculations later. Signed-off-by:
-
Taehee Yoo authored
When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: stable@vger.kernel.org Fixes: c7cdba31 ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20191121122645.9355-1-ap420073@gmail.com [trim stack dump a bit] Signed-off-by:
-
Thomas Pedersen authored
Commit 7b6ddeaf ("mac80211: use QoS NDP for AP probing") let STAs send QoS Null frames as PS triggers if the AP was a QoS STA. However, the mac80211 PS stack relies on an interface flag IEEE80211_STA_NULLFUNC_ACKED for determining trigger frame ACK, which was not being set for acked non-QoS Null frames. The effect is an inability to trigger hardware sleep via IEEE80211_CONF_PS since the QoS Null frame was seemingly never acked. This bug only applies to drivers which set both IEEE80211_HW_REPORTS_TX_ACK_STATUS and IEEE80211_HW_PS_NULLFUNC_STACK. Detect the acked QoS Null frame to restore STA power save. Fixes: 7b6ddeaf ("mac80211: use QoS NDP for AP probing") Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.comSigned-off-by:
-
Thomas Pedersen authored
This is useful during testing to eg. check the currently configured HW power save state. Signed-off-by:
-
Toke Høiland-Jørgensen authored
In ieee80211_tx_status() we don't have an sdata struct when looking up the destination sta. Instead, we just do a lookup by the vif addr that is the source of the packet being completed. Factor this out into a new sta_info getter helper, since we need to use it for accounting AQL as well. Signed-off-by:
-
Johannes Berg authored
Add a note with a use-case for the monitor-to-dev injection mechanism in mac80211, reported by Ben Greear. Change-Id: I6456997ef9bc40b24ede860b6ef2fed5af49cf44 Signed-off-by: -
Mao Wenan authored
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1 ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
- 21 Nov, 2019 23 commits
-
-
David S. Miller authored
Paolo Abeni says: ==================== net: introduce and use route hint This series leverages the listification infrastructure to avoid unnecessary route lookup on ingress packets. In absence of custom rules, packets with equal daddr will usually land on the same dst. When processing packet bursts (lists) we can easily reference the previous dst entry. When we hit the 'same destination' condition we can avoid the route lookup, coping the already available dst. Detailed performance numbers are available in the individual commit messages. v3 -> v4: - move helpers to their own patches (Eric D.) - enable hints for SUBTREE builds (David A.) - re-enable hints for ipv4 forward (David A.) v2 -> v3: - use fib*_has_custom_rules() helpers (David A.) - add ip*_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem ) v1 -> v2: - fix build issue with !CONFIG_IP*_MULTIPLE_TABLES - fix potential race in ip6_list_rcv_finish() ==================== Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Paolo Abeni authored
This is alike the previous change, with some additional ipv4 specific quirk. Even when using the route hint we still have to do perform additional per packet checks about source address validity: a new helper is added to wrap them. Hints are explicitly disabled if the destination is a local broadcast, that keeps the code simple and local broadcast are a slower path anyway. UDP flood performances vs recvmmsg() receiver: vanilla patched delta Kpps Kpps % 1683 1871 +11 In the worst case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - re-enable hints for forward v2 -> v3: - really fix build (sic) and hint usage check - use fib4_has_custom_rules() helpers (David A.) - add ip_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem) v1 -> v2: - fix build issue with !CONFIG_IP_MULTIPLE_TABLES Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Paolo Abeni authored
So that we can use it in the next patch. Additionally constify the helper argument. Suggested-by:
-
Paolo Abeni authored
When doing RX batch packet processing, we currently always repeat the route lookup for each ingress packet. When no custom rules are in place, and there aren't routes depending on source addresses, we know that packets with the same destination address will use the same dst. This change tries to avoid per packet route lookup caching the destination address of the latest successful lookup, and reusing it for the next packet when the above conditions are in place. Ingress traffic for most servers should fit. The measured performance delta under UDP flood vs a recvmmsg receiver is as follow: vanilla patched delta Kpps Kpps % 1431 1674 +17 In the worst-case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - support hints for SUBFLOW build, too (David A.) - several style fixes (Eric) v2 -> v3: - add fib6_has_custom_rules() helpers (David A.) - add ip6_extract_route_hint() helper (Edward C.) - use hint directly in ip6_list_rcv_finish() (Willem) v1 -> v2: - fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES - fix potential race when fib6_has_custom_rules is set while processing a packet batch Signed-off-by:
-
Paolo Abeni authored
Use a per namespace counter, increment it on successful creation of any route using the source address, decrement it on deletion of such routes. This allows us to check easily if the routing decision in the current namespace depends on the packet source. Will be used by the next patch. Suggested-by:
-
Paolo Abeni authored
It wraps the namespace field with the same name, to easily access it regardless of build options. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
David S. Miller authored
Yangbo Lu says: ==================== Support PTP clock and hardware timestamping for DSA Felix driver This patch-set is to support PTP clock and hardware timestamping for DSA Felix driver. Some functions in ocelot.c/ocelot_board.c driver were reworked/exported, so that DSA Felix driver was able to reuse them as much as possible. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. ==================== Signed-off-by: -
Yangbo Lu authored
This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Yangbo Lu authored
This patch is to define PTP registers for felix_vsc9959. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Yangbo Lu authored
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Yangbo Lu authored
The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by:
-
Yangbo Lu authored
Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by:
-
John Fastabend authored
Report from Dan Carpenter, net/core/skmsg.c:792 sk_psock_write_space() error: we previously assumed 'psock' could be null (see line 790) net/core/skmsg.c 789 psock = sk_psock(sk); 790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))) Check for NULL 791 schedule_work(&psock->work); 792 write_space = psock->saved_write_space; ^^^^^^^^^^^^^^^^^^^^^^^^ 793 rcu_read_unlock(); 794 write_space(sk); Ensure psock dereference on line 792 only occurs if psock is not null. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Jiri Olsa authored
The 0-DAY found that audit_log_task is not declared under CONFIG_AUDITSYSCALL which causes compilation error when it is not defined: kernel/bpf/syscall.o: In function `bpf_audit_prog.isra.30': >> syscall.c:(.text+0x860): undefined reference to `audit_log_task' Adding the audit_log_task declaration and stub within CONFIG_AUDITSYSCALL ifdef. Fixes: 91e6015b ("bpf: Emit audit messages upon successful prog load and unload") Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by:
-
Xin Long authored
As Jakub suggested on another patch, it's better to do the check on erspan options before allocating memory. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
LWTUNNEL_IP(6)_OPTS are the new items in ip(6)_tun_policy, which are parsed by nla_parse_nested_deprecated(). We should check it strictly by setting .strict_start_type = LWTUNNEL_IP(6)_OPTS. This patch also adds missing LWTUNNEL_IP6_OPTS in ip6_tun_policy. Fixes: 4ece4778 ("lwtunnel: add options setting and dumping for geneve") Signed-off-by:
-
Xin Long authored
ct_policy and mpls_policy are parsed with nla_parse_nested(), which does NL_VALIDATE_STRICT validation, strict_start_type is not needed to set as it is actually trying to make some attributes parsed with NL_VALIDATE_STRICT. This patch is to remove it, and do the same on rtm_nh_policy which is parsed by nlmsg_parse(). Suggested-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== net: sched: support vxlan and erspan options This patchset is to add vxlan and erspan options support in cls_flower and act_tunnel_key. The form is pretty much like geneve_opts in: https://patchwork.ozlabs.org/patch/935272/ https://patchwork.ozlabs.org/patch/954564/ but only one option is allowed for vxlan and erspan. v1->v2: - see each patch changelog. ==================== Acked-by:
-
Xin Long authored
This patch is to allow matching options in erspan. The options can be described in the form: VER:INDEX:DIR:HWID/VER:INDEX_MASK:DIR_MASK:HWID_MASK. When ver is set to 1, index will be applied while dir and hwid will be ignored, and when ver is set to 2, dir and hwid will be used while index will be ignored. Different from geneve, only one option can be set. And also, geneve options, vxlan options or erspan options can't be set at the same time. # ip link add name erspan1 type erspan external # tc qdisc add dev erspan1 ingress # tc filter add dev erspan1 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ erspan_opts 1:12:0:0/1:ffff:0:0 \ ip_proto udp \ action mirred egress redirect dev eth0 v1->v2: - improve some err msgs of extack. Signed-off-by: -
Xin Long authored
This patch is to allow matching gbp option in vxlan. The options can be described in the form GBP/GBP_MASK, where GBP is represented as a 32bit hexadecimal value. Different from geneve, only one option can be set. And also, geneve options and vxlan options can't be set at the same time. # ip link add name vxlan0 type vxlan dstport 0 external # tc qdisc add dev vxlan0 ingress # tc filter add dev vxlan0 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ vxlan_opts 01020304/ffffffff \ ip_proto udp \ action mirred egress redirect dev eth0 v1->v2: - add .strict_start_type for enc_opts_policy as Jakub noticed. - use Duplicate instead of Wrong in err msg for extack as Jakub suggested. Signed-off-by: -
Xin Long authored
This patch is to allow setting erspan options using the act_tunnel_key action. Different from geneve options, only one option can be set. And also, geneve options, vxlan options or erspan options can't be set at the same time. Options are expressed as ver:index:dir:hwid, when ver is set to 1, index will be applied while dir and hwid will be ignored, and when ver is set to 2, dir and hwid will be used while index will be ignored. # ip link add name erspan1 type erspan external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_proto udp \ action tunnel_key \ set src_ip 10.0.99.192 \ dst_ip 10.0.99.193 \ dst_port 6081 \ id 11 \ erspan_opts 1:2:0:0 \ action mirred egress redirect dev erspan1 v1->v2: - do the validation when dst is not yet allocated as Jakub suggested. - use Duplicate instead of Wrong in err msg for extack. Signed-off-by:
-
