- 24 Nov, 2016 40 commits
-
-
NeilBrown authored
[ Upstream commit 1217e1d1 ] mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Cc: stable@vger.kernel.org (v3.7+) Reported-by:
Viswesh <viswesh.vichu@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
NeilBrown authored
[ Upstream commit 5ed1df2e ] There can be a small window between the moment that recovery actually writes the last block and the time when various sysfs and /proc/mdstat attributes report that it has finished. During this time, 'sync_completed' can have the wrong value. This can confuse monitoring software. So: - don't set curr_resync_completed beyond the end of the devices, - set it correctly when resync/recovery has completed. Signed-off-by:
-
Ching Huang authored
[ Upstream commit 2bf7dc84 ] The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: <stable@vger.kernel.org> Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit 4d2b496f ] map_storep was not being vfree()'d in the module_exit call. Cc: <stable@vger.kernel.org> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 7dc86ef5 ] Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Hogan authored
[ Upstream commit ede5f3e7 ] The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 537b4b46 ] The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Kashyap Desai authored
[ Upstream commit 1e793f6f ] Commit 02b01e01 ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e01 CC: stable@vger.kernel.org Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Sasha Levin authored
[ Upstream commit 80f23935 ] PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this instance the code comes directly from ISA v2.07, including the cmp, but cmpd is correct. Backport to stable so that new toolchains can build old kernels. Fixes: 948cf67c ("powerpc: Add NAP mode support on Power7 in HV mode") Cc: stable@vger.kernel.org # v3.0 Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Tom St Denis authored
[ Upstream commit fb9a5b0c ] Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Alex Deucher authored
[ Upstream commit 670bb4fd ] Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
-
Johan Hovold authored
[ Upstream commit de24e0a1 ] The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Patrick Scheuring authored
[ Upstream commit da25311c ] The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit ea720935 ] In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Gerald Schaefer authored
[ Upstream commit a7a7aeef ] When interrupting an application which was allocating DMAable memory, it was possible, that the DMA memory was deallocated twice, leading to the error symptoms below. Thanks to Gerald, who analyzed the problem and provided this patch. I agree with his analysis of the problem: ddcb_cmd_fixups() -> genwqe_alloc_sync_sgl() (fails in f/lpage, but sgl->sgl != NULL and f/lpage maybe also != NULL) -> ddcb_cmd_cleanup() -> genwqe_free_sync_sgl() (double free, because sgl->sgl != NULL and f/lpage maybe also != NULL) In this scenario we would have exactly the kind of double free that would explain the WARNING / Bad page state, and as expected it is caused by broken error handling (cleanup). Using the Ubuntu git source, tag Ubuntu-4.4.0-33.52, he was able to reproduce the "Bad page state" issue, and with the patch on top he could not reproduce it any more. ------------[ cut here ]------------ WARNING: at /build/linux-o03cxz/linux-4.4.0/arch/s390/include/asm/pci_dma.h:141 Modules linked in: qeth_l2 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common genwqe_card qeth crc_itu_t qdio ccwgroup vmur dm_multipath dasd_eckd_mod dasd_mod CPU: 2 PID: 3293 Comm: genwqe_gunzip Not tainted 4.4.0-33-generic #52-Ubuntu task: 0000000032c7e270 ti: 00000000324e4000 task.ti: 00000000324e4000 Krnl PSW : 0404c00180000000 0000000000156346 (dma_update_cpu_trans+0x9e/0xa8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000324e7bcd 0000000000c3c34a 0000000027628298 000000003215b400 0000000000000400 0000000000001fff 0000000000000400 0000000116853000 07000000324e7b1e 0000000000000001 0000000000000001 0000000000000001 0000000000001000 0000000116854000 0000000000156402 00000000324e7a38 Krnl Code: 000000000015633a: 95001000 cli 0(%r1),0 000000000015633e: a774ffc3 brc 7,1562c4 #0000000000156342: a7f40001 brc 15,156344 >0000000000156346: 92011000 mvi 0(%r1),1 000000000015634a: a7f4ffbd brc 15,1562c4 000000000015634e: 0707 bcr 0,%r7 0000000000156350: c00400000000 brcl 0,156350 0000000000156356: eb7ff0500024 stmg %r7,%r15,80(%r15) Call Trace: ([<00000000001563e0>] dma_update_trans+0x90/0x228) [<00000000001565dc>] s390_dma_unmap_pages+0x64/0x160 [<00000000001567c2>] s390_dma_free+0x62/0x98 [<000003ff801310ce>] __genwqe_free_consistent+0x56/0x70 [genwqe_card] [<000003ff801316d0>] genwqe_free_sync_sgl+0xf8/0x160 [genwqe_card] [<000003ff8012bd6e>] ddcb_cmd_cleanup+0x86/0xa8 [genwqe_card] [<000003ff8012c1c0>] do_execute_ddcb+0x110/0x348 [genwqe_card] [<000003ff8012c914>] genwqe_ioctl+0x51c/0xc20 [genwqe_card] [<000000000032513a>] do_vfs_ioctl+0x3b2/0x518 [<0000000000325344>] SyS_ioctl+0xa4/0xb8 [<00000000007b86c6>] system_call+0xd6/0x264 [<000003ff9e8e520a>] 0x3ff9e8e520a Last Breaking-Event-Address: [<0000000000156342>] dma_update_cpu_trans+0x9a/0xa8 ---[ end trace 35996336235145c8 ]--- BUG: Bad page state in process jbd2/dasdb1-8 pfn:3215b page:000003d100c856c0 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x3fffc0000000000() page dumped because: nonzero _count Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Chris Mason authored
[ Upstream commit 570dd450 ] btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the list because it knows all of the waiters are patiently waiting for the commit to finish. But, there's a small race where btrfs_sync_log can remove itself from the list if it finds a log commit is already done. Also, it uses list_del_init() to remove itself from the list, but there's no way to know if btrfs_remove_all_log_ctxs has already run, so we don't know for sure if it is safe to call list_del_init(). This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and just calls it with the proper locking. This is part two of the corruption fixed by cbd60aa7. I should have done this in the first place, but convinced myself the optimizations were safe. A 12 hour run of dbench 2048 will eventually trigger a list debug WARN_ON for the list_del_init() in btrfs_sync_log(). Fixes: d1433debReported-by:
Dave Jones <davej@codemonkey.org.uk> cc: stable@vger.kernel.org # 3.15+ Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Scot Doyle authored
[ Upstream commit 009e39ae ] When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.comReported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dmitry Vyukov authored
[ Upstream commit 32b2921e ] Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by:
-
Marcel Hasler authored
[ Upstream commit bdc3478f ] The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Howells authored
[ Upstream commit 03dab869 ] This fixes CVE-2016-7042. Fix a short sprintf buffer in proc_keys_show(). If the gcc stack protector is turned on, this can cause a panic due to stack corruption. The problem is that xbuf[] is not big enough to hold a 64-bit timeout rendered as weeks: (gdb) p 0xffffffffffffffffULL/(60*60*24*7) $2 = 30500568904943 That's 14 chars plus NUL, not 11 chars plus NUL. Expand the buffer to 16 chars. I think the unpatched code apparently works if the stack-protector is not enabled because on a 32-bit machine the buffer won't be overflowed and on a 64-bit machine there's a 64-bit aligned pointer at one side and an int that isn't checked again on the other side. The panic incurred looks something like: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679 Call Trace: [<ffffffff813d941f>] dump_stack+0x63/0x84 [<ffffffff811b2cb6>] panic+0xde/0x22a [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0 [<ffffffff81350410>] ? key_validate+0x50/0x50 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20 [<ffffffff8126b31c>] seq_read+0x2cc/0x390 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70 [<ffffffff81244fc7>] __vfs_read+0x37/0x150 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0 [<ffffffff81246156>] vfs_read+0x96/0x130 [<ffffffff81247635>] SyS_read+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Reported-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Long Li authored
[ Upstream commit 407a3aee ] The host keeps sending heartbeat packets independent of the guest responding to them. Even though we respond to the heartbeat messages at interrupt level, we can have situations where there maybe multiple heartbeat messages pending that have not been responded to. For instance this occurs when the VM is paused and the host continues to send the heartbeat messages. Address this issue by draining and responding to all the heartbeat messages that maybe pending. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Alexander Usyskin authored
[ Upstream commit 43605e29 ] SEC registers are not accessible when the TXE device is in low power state, hence the SEC interrupt cannot be processed if device is not awake. In some rare cases entrance to low power state (aliveness off) and input ready bits can be signaled at the same time, resulting in communication stall as input ready won't be signaled again after waking up. To resolve this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the interrupt is not processed. Cc: stable@vger.kernel.org Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
tang.junhui authored
[ Upstream commit dafa724b ] dm_get_target_type() was previously called so any error returned from dm_table_add_target() must first call dm_put_target_type(). Otherwise the DM target module's reference count will leak and the associated kernel module will be unable to be removed. Also, leverage the fact that r is already -EINVAL and remove an extra newline. Fixes: 36a0456f ("dm table: add immutable feature") Fixes: cc6cbe14 ("dm table: add always writeable feature") Fixes: 3791e2fc ("dm table: add singleton feature") Cc: stable@vger.kernel.org # 3.2+ Signed-off-by:
tang.junhui <tang.junhui@zte.com.cn> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Bryan Paluch authored
[ Upstream commit ed6d6f8f ] Increase ohci watchout delay to 275 ms. Previous delay was 250 ms with 20 ms of slack, after removing slack time some ohci controllers don't respond in time. Logs from systems with controllers that have the issue would show "HcDoneHead not written back; disabled" Signed-off-by:
Bryan Paluch <bryanpaluch@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 126d26f6 ] Make sure we have at least one port before attempting to register a console. Currently, at least one driver binds to a "dummy" interface and requests zero ports for it. Should such an interface also lack endpoints, we get a NULL-deref during probe. Fixes: e5b1e206 ("USB: serial: make minor allocation dynamic") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 4c39135a ] xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by:
Hasan Mahmood <hasan.mahm@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 58d78967 ] The function xfs_calc_dquots_per_chunk takes a parameter in units of basic blocks. The kernel seems to get the units wrong, but userspace got 'fixed' by commenting out the unnecessary conversion. Fix both. cc: <stable@vger.kernel.org> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dinesh Israni authored
[ Upstream commit 926317de ] This patch addresses a bug where a local EXTENDED_COPY WRITE or READ backend I/O request would always return SAM_STAT_CHECK_CONDITION, even if underlying xcopy_pt_cmd->se_cmd generated a different SCSI status code. ESX host environments expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Tested on v4.1.y with ESX v5.5u2+ with local IBLOCK backend copy. Reported-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by:
Dinesh Israni <ddi@datera.io> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 843741c5 ] When the operation fails we also have to undo the changes we made to ->xattr_names. Otherwise listxattr() will report wrong lengths. Cc: stable@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Frederic Barrat authored
[ Upstream commit d2cf909c ] If a cxl adapter faults on an invalid address for a kernel context, we may enter copro_calculate_slb() with a NULL mm pointer (kernel context) and an effective address which looks like a user address. Which will cause a crash when dereferencing mm. It is clearly an AFU bug, but there's no reason to crash either. So return an error, so that cxl can ack the interrupt with an address error. Fixes: 73d16a6e ("powerpc/cell: Move data segment faulting code out of cell platform") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit a2ed0b39 ] When isofs_mount() is called to mount a device read-write, it returns EACCES even before it checks that the device actually contains an isofs filesystem. This may confuse mount(8) which then tries to mount all subsequent filesystem types in read-only mode. Fix the problem by returning EACCES only once we verify that the device indeed contains an iso9660 filesystem. CC: stable@vger.kernel.org Fixes: 17b7f7cfReported-by:
Kent Overstreet <kent.overstreet@gmail.com> Reported-by:
Karel Zak <kzak@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Stefan Tauner authored
[ Upstream commit ca006f78 ] This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by:
Stefan Tauner <stefan.tauner@technikum-wien.at> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 9158cb29 ] Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. This is currently not the case and it could trigger various errors. Fix this by properly deal with runtime PM in this regards. This means making sure the device is runtime resumed, when serving requests via the ->request() callback or changing settings via the ->set_param() callbacks. Cc: <stable@vger.kernel.org> Cc: Ritesh Raj Sarraf <rrs@researchut.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit 796aa46a ] Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. Therefore when the rtsx_usb_ms driver polls for inserted memstick cards, let's add pm_runtime_get|put*() to make sure accesses is done when the rtsx usb device is runtime resumed. Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
-
Ulf Hansson authored
[ Upstream commit 4f48aa7a ] Accesses of the rtsx sdmmc's parent device, which is the rtsx usb device, must be done when it's runtime resumed. Currently this isn't case when changing the led, so let's fix this by adding a pm_runtime_get_sync() and a pm_runtime_put() around those operations. Reported-by:
-
Ulf Hansson authored
[ Upstream commit 31cf742f ] The rtsx_usb_sdmmc driver may bail out in its ->set_ios() callback when no SD card is inserted. This is wrong, as it could cause the device to remain runtime resumed when it's unused. Fix this behaviour. Tested-by:
-
Haibo Chen authored
[ Upstream commit 02265cd6 ] Potentially overflowing expression 1000000 * data->timeout_clks with type unsigned int is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type unsigned long long. To avoid overflow, cast 1000000U to type unsigned long long. Special thanks to Coverity. Fixes: 7f05538a ("mmc: sdhci: fix data timeout (part 2)") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v3.15+ Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 6c83f772 ] If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d102eb5c ] The timeout loop terminates when the loop count is zero, but the decrement of the count variable is post check. So count is -1 when we check for the timeout and therefor the error message is supressed. Change it to predecrement, so the error message is emitted. [ tglx: Massaged changelog ] Fixes: a2c22510 ("irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20161014072534.GA15168@mwandaSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 02cfb5fc ] Ported from Rex's amdgpu change. Signed-off-by:
-
