- 09 Aug, 2017 8 commits
-
-
Bhumika Goyal authored
Make these structures const as they are only passed to the function drm_fb_helper_prepare and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_fb_helper_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_fb_helper_prepare(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_fb_helper_funcs s; Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502205245-17365-1-git-send-email-bhumirks@gmail.com
-
Bhumika Goyal authored
Make these const as they are only passed to the function drm_connector_init and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_connector_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_connector_init(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_connector_funcs s; Signed-off-by: -
Bhumika Goyal authored
Make these const as they are only passed to the function drm_connector_init and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_connector_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_connector_init(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_connector_funcs s; Signed-off-by: -
Bhumika Goyal authored
Make these const as they are only passed to the function drm_connector_init and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_connector_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_connector_init(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_connector_funcs s; Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
David Lechner authored
This adds parameters for vaddr and clip to tinydrm_xrgb8888_to_gray8() to make it more generic. dma_buf_{begin,end}_cpu_access() are moved out to the repaper driver. Return type is change to void to simplify error handling by callers. Signed-off-by:David Lechner <david@lechnology.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1502127581-10517-2-git-send-email-david@lechnology.com
-
Dan Carpenter authored
"plane->format_count" can go up to 64. (It's capped in drm_universal_plane_init().) So we should be using ULL type instead of int here to prevent shift wrapping. Fixes: db1689aa ("drm: Create a format/modifier blob") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170809111906.4rv3hzritctfktv3@mwanda
-
Arvind Yadav authored
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Reviewed-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/44c0ccab8b5658d17a3ed553e721136b53d95521.1502264156.git.arvind.yadav.cs@gmail.com
-
Bhumika Goyal authored
Make these structures const as they are only stored in the funcs field of drm_bridge structure, which is of type const. Done using Coccinelle. Reviewed-by:
-
- 08 Aug, 2017 18 commits
-
-
Eric Anholt authored
This is useful to allow GL to provide defined results for overlapping glBlitFramebuffer, which X11 in turn uses to accelerate uncomposited window movement without first blitting to a temporary. x11perf -copywinwin100 goes from 1850/sec to 4850/sec. v2: Default to the same behavior as before when the flags aren't passed. (suggested by Boris) Signed-off-by:Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170725162733.28007-2-eric@anholt.netReviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Eric Anholt authored
Userspace shouldn't be able to spam dmesg by passing bad arguments. This has particularly become an issues since we started using a bad argument to set_tiling to detect if set_tiling was supported. Signed-off-by:
-
Cihangir Akturk authored
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() adn should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by:
Cihangir Akturk <cakturk@gmail.com> Signed-off-by:
-
Eric Anholt authored
drm_bridge_remove() is for unregistering a bridge driver, not for detaching a bridge from its consumer. Fixes: 656fa22f ("drm/vc4: Switch DSI to the panel-bridge layer, and support bridges.") Signed-off-by:
-
Eric Anholt authored
The clocks are enabled/disabled at encoder enable/disable time, not at component load. Fixes a WARN_ON at boot if V3D fails to probe. Fixes: 4078f575 ("drm/vc4: Add DSI driver") Signed-off-by:
-
Eric Anholt authored
It's also destroyed from the top level vc4_drv.c initialization, which is where the cache was actually initialized from. This used to just involve duplicate del_timer() and cancel_work_sync() being called, but it started causing kmalloc issues once we double-freed the new BO label array. Fixes: 1908a876f909 ("drm/vc4: Add an ioctl for labeling GEM BOs for summary stats") Signed-off-by: -
Daniel Vetter authored
Finally all users are gone! Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Acked-by:
Vincent Abriou <vincent.abriou@st.com>
-
Daniel Vetter authored
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by:
-
Daniel Vetter authored
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
Liviu Dudau <Liviu.Dudau@arm.com> Acked-by:
-
Daniel Vetter authored
It's dead code because this is now handled in the core. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Daniel Vetter authored
The reason behind the original indirection through the helper functions was to allow existing drivers to overwrite how they handle properties. For example when a vendor-specific userspace had expectations that didn't match atomic. That seemed likely, since atomic is standardizing a _lot_ more of the behaviour of a kms driver. But 20 drivers later there's no such need at all. Worse, this forces all drivers to hook up the default behaviour, breaking userspace if they forget to do that. And it forces us to export a bunch of core function just for those helpers. And finally, these helpers are the last places using drm_atomic_legacy_backoff() and the implicit acquire_ctx. This patch here just implements the new behaviour and updates the docs. Follow-up patches will garbage-collect all the dead code. v2: Fixup docs even better! v3: Make it actually work ... v4: Drop the uses_atomic_modeset() checks from the previous patch again, since they're now moved up in the callchain. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> (v3) Reviewed-by:
-
Daniel Vetter authored
Atomic drivers only use the property value store for immutable (i.e. can't be set by userspace, but the kernel can still adjust it) properties. The only tricky part is the removal of the update in drm_atomic_helper_update_legacy_modeset_state(). This was added in commit 8c10342c (tag: topic/drm-misc-2015-07-28) Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jul 27 13:24:29 2015 +0200 drm/atomic: Update legacy DPMS state during modesets, v3. by copying it from the i915 code, where it was originally added in commit 68d34720 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Sep 6 22:08:35 2012 +0200 drm/i915: update dpms property in set_mode for the legacy modeset code. The reason we needed this hack was that i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of the newer-ish drm_drv_uses_atomic_modeset(), which avoids such troubles. With the correct feature checks this isn't needed anymore at all. Also make sure that drivers don't accidentally get this wrong by making the exported version of drm_object_property_get_value() only work for legacy drivers. Only gma500 uses it anyway. v2: Fixup the uses_atomic_modeset() checks (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Maarten Lankhorst authored
I want/need to rework the core property handling, and this hack is getting in the way. But since it's a non-standard propety only used by legacy userspace we know that this will only every be called from ioctl code. And never on some other free-standing state struct, where this old hack wouldn't work either. v2: don't forget zorder and get_property! v3: Shadow the legacy state to avoid locking issues in get_property (Maarten). v4: Review from Laurent - Move struct omap_crtc_state into omap_crtc.c - Clean up comments. - Don't forget to copy the shadowed state over on duplicate. v5: Don't forget to update the reset handler (Maarten). v6: Update omap_crtc_state shadow values in omap_crtc_atomic_check (Maarten). v7: - Fix get_property to return 0 and set value in *val (Maarten). - Update comment in set_property for changes in v6 (Maarten). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v4) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (v4) Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-16-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Jose Abreu authored
Currently HDMI 2.0 PHYs do not have a default configuration function. As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D PHYs we can provide the same default configuration function for both and still let user overwrite this with custom configuration function if needed. If, for some reason, the PHY is custom or has a register different register layout then custom configuration function *must* be provided in order for the system to work correctly. As we prefer the pdata provided configuration function over the internal one this change will not make any impact in custom platforms. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Tested-by:
Mark Yao <mark.yao@rock-chips.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Heiko Stübner <heiko@sntech.de> Reviewed-by:
-
- 07 Aug, 2017 8 commits
-
-
David Lechner authored
The fbdev subsystem has a place for physical dimensions (width and height in mm) that is readable by userspace. Since DRM also knows these dimensions, pass this information to the fbdev device. This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs() because fb_helper->fbdev may be NULL in drm_setup_crtcs(). Signed-off-by:
-
Mikko Rapeli authored
These are defined in linux/types.h or drm/drm.h. Fixes user space compilation errors like: drm/armada_drm.h:26:2: error: unknown type name ‘uint32_t’ uint32_t handle; ^~~~~~~~ Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Russell King authored
We don't need the CEC engine register definitions, so let's remove them. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
-
Russell King authored
Add a CEC driver for the dw-hdmi hardware. Reviewed-by:
-
Hans Verkuil authored
The __dw_hdmi_remove() function was missing a call to cec_notifier_put to balance the cec_notifier_get in the probe function. Signed-off-by:
-
Peter Rosin authored
Drivers no longer have any need for these callbacks, and there are no users. Zap. Zap-zap-zzzap-p-pp-p. Acked-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code that was not doing anything sensible anyway. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Kuninori Morimoto authored
This driver's Copyright is under Renesas Solutions Corp. This patch updates the year, because this driver was moved into synopsys folder in 2017. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 04 Aug, 2017 6 commits
-
-
Russell King authored
The video setup path aways sets the clock disable register to a specific value, which has the effect of disabling the CEC engine. When we add the CEC driver, this becomes a problem. Fix this by only setting/clearing the bits that the video path needs to. Reviewed-by:
-
Russell King authored
Add CEC notifier support to the HDMI bridge driver, so that the CEC part of the IP can receive its physical address. Signed-off-by:
-
David Lechner authored
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that drivers can have a driver-specific implementation if needed. Suggested-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
-
Peter Rosin authored
The redundant fb helper .load_lut is no longer used, and can not work right without also providing the fb helpers .gamma_set and .gamma_get thus rendering the code in this driver suspect. Just remove the dead code. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
