- 04 Jul, 2018 12 commits
-
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Improves packet rate of 1-byte UDP receives by up to 10%. Signed-off-by:
-
Edward Cree authored
Just calls netif_receive_skb() in a loop. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: fully support for dscp and flowlabel per transport Now dscp and flowlabel are set from sock when sending the packets, but being multi-homing, sctp also supports for dscp and flowlabel per transport, which is described in section 8.1.12 in RFC6458. v1->v2: - define ip_queue_xmit as inline in net/ip.h, instead of exporting it in Patch 1/5 according to David's suggestion. - fix the param len check in sctp_s/getsockopt_peer_addr_params() in Patch 3/5 to guarantee that an old app built with old kernel headers could work on the newer kernel per Marcelo's point. ==================== Signed-off-by: -
Xin Long authored
The transport with illegal flowlabel should not be allowed to send packets. Other transport protocols already denies this. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Struct sockaddr_in6 has the member sin6_flowinfo that includes the ipv6 flowlabel, it should also support for setting flowlabel when adding a transport whose ipaddr is from userspace. Note that addrinfo in sctp_sendmsg is using struct in6_addr for the secondary addrs, which doesn't contain sin6_flowinfo, and it needs to copy sin6_flowinfo from the primary addr. Signed-off-by:
-
Xin Long authored
spp_ipv6_flowlabel and spp_dscp are added in sctp_paddrparams in this patch so that users could set sctp_sock/asoc/transport dscp and flowlabel with spp_flags SPP_IPV6_FLOWLABEL or SPP_DSCP by SCTP_PEER_ADDR_PARAMS , as described section 8.1.12 in RFC6458. As said in last patch, it uses '| 0x100000' or '|0x1' to mark flowlabel or dscp is set, so that their values could be set to 0. Note that to guarantee that an old app built with old kernel headers could work on the newer kernel, the param's check in sctp_g/setsockopt_peer_addr_params() is also improved, which follows the way that sctp_g/setsockopt_delayed_ack() or some other sockopts' process that accept two types of params does. Signed-off-by:
-
Xin Long authored
Like some other per transport params, flowlabel and dscp are added in transport, asoc and sctp_sock. By default, transport sets its value from asoc's, and asoc does it from sctp_sock. flowlabel only works for ipv6 transport. Other than that they need to be passed down in sctp_xmit, flow4/6 also needs to set them before looking up route in get_dst. Note that it uses '& 0x100000' to check if flowlabel is set and '& 0x1' (tos 1st bit is unused) to check if dscp is set by users, so that they could be set to 0 by sockopt in next patch. Signed-off-by:
-
Xin Long authored
This patch introduces __ip_queue_xmit(), through which the callers can pass tos param into it without having to set inet->tos. For ipv6, ip6_xmit() already allows passing tclass parameter. It's needed when some transport protocol doesn't use inet->tos, like sctp's per transport dscp, which will be added in next patch. Signed-off-by:
-
Linus Walleij authored
This adds a DSA driver for: Vitesse VSC7385 SparX-G5 5-port Integrated Gigabit Ethernet Switch Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch These switches have a built-in 8051 CPU and can download and execute firmware in this CPU. They can also be configured to use an external CPU handling the switch in a memory-mapped manner by connecting to that external CPU's memory bus. This driver (currently) only takes control of the switch chip over SPI and configures it to route packages around when connected to a CPU port. The chip has embedded PHYs and VLAN support so we model it using DSA as a best fit so we can easily add VLAN support and maybe later also exploit the internal frame header to get more direct control over the switch. The four built-in GPIO lines are exposed using a standard GPIO chip. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The VSC7385, VSC7388, VSC7395 and VSC7398 are integrated switch/router chips for 5+1 or 8-port switches/routers. When managed directly by Linux using DSA we need to do a special set-up "dance" on the PHY. Unfortunately these sequences switches the PHY to undocumented pages named 2a30 and 52b6 and does undocumented things. It is described by these opaque sequences also in the reference manual. This is a best effort to integrate it anyways. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Linus Walleij authored
This adds the device tree bindings for the Vitesse VSC73xx switches. We also add the vendor name for Vitesse. Cc: devicetree@vger.kernel.org Reviewed-by:
-
- 03 Jul, 2018 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-03 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various improvements to bpftool and libbpf, that is, bpftool build speed improvements, missing BPF program types added for detection by section name, ability to load programs from '.text' section is made to work again, and better bash completion handling, from Jakub. 2) Improvements to nfp JIT's map read handling which allows for optimizing memcpy from map to packet, from Jiong. 3) New BPF sample is added which demonstrates XDP in combination with bpf_perf_event_output() helper to sample packets on all CPUs, from Toke. 4) Add a new BPF kselftest case for tracking connect(2) BPF hooks infrastructure in combination with TFO, from Andrey. 5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to read payload from packet data in order to use it for benchmarking. Also for '--action XDP_TX' option implement swapping of MAC addresses to avoid drops on some hardware seen during testing, from Jesper. ==================== Signed-off-by: -
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: various ethtool ops implementation In this patchset Anton Mikaev and I added some useful ethtool operations: - ring size changes - link renegotioation - flow control management The patch also improves init/deinit sequence. V3 changes: - After review and analysis it is clear that rtnl lock (which is captured by default on ethtool ops) is enough to secure possible overlapping of dev open/close. Thus, just dropping internal mutex. V2 changes: - using mutex to secure simultaneous dev close/open - using state var to store/restore dev state ==================== Signed-off-by: -
Igor Russkikh authored
Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Anton Mikaev authored
Adds ethtool -r|--negotiate operation support. It triggers special control bit on FW interface causing FW to restart link negotiation. Signed-off-by:
Anton Mikaev <amikaev@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
Runtime change of pause frame configuration (rx/tx flow control) via ethtool. Signed-off-by:
-
Igor Russkikh authored
We now pass link drop status to FW on init/deinit. This is required to inform FW that driver took/released a control on link. FW then will manage its own state and device power profile based on this information. To improve management we remove mpi_set function which ambiguously took both state and speed parameters. Deinit callback is now a part of FW ops, as it actually manages the FW. Signed-off-by:
-
Anton Mikaev authored
Implemented ring size setup, min/max validation and reconfiguration in runtime. Signed-off-by:
-
Gustavo A. R. Silva authored
Add suffix UL to constant 1024 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and following expressions are currently being evaluated using 32-bit arithmetic: qopt->idleslope * 1024 * ptr qopt->hicredit * 1024 * 8 qopt->locredit * 1024 * 8 Addresses-Coverity-ID: 1470246 ("Unintentional integer overflow") Addresses-Coverity-ID: 1470248 ("Unintentional integer overflow") Addresses-Coverity-ID: 1470249 ("Unintentional integer overflow") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Dan Murphy authored
If SGMII was selected in the DT then the device should write the SGMII enable bit. If SGMII is not selected in the DT then the SGMII bit should be disabled. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
Add INT_STAT3 interrupt setting and clearing support. Signed-off-by:
-
David S. Miller authored
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by:
-
- 02 Jul, 2018 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD fixes from Shaohua Li: "Two small fixes for MD: - an error handling fix from me - a recover bug fix for raid10 from BingJing" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid10: fix that replacement cannot complete recovery after reassemble MD: cleanup resources in failure
-
git://github.com/stffrdhrn/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "Two fixes for issues which were breaking OpenRISC boot: - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's page table flag addition. - Fix issue booting on real hardware if delay slot detection emulation is disabled" * tag 'for-linus' of git://github.com/stffrdhrn/linux: openrisc: entry: Fix delay slot exception detection openrisc: Call destructor during __pte_free_tlb -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ... -
David S. Miller authored
Peng Li says: ==================== net: hns3: a few code improvements This patchset removes some redundant code and fixes a few code stylistic issues from internal concentrated review, no functional changes introduced. --- Change log: V1 -> V2: 1, remove a patch according to the comment reported by David Miller. --- ==================== Signed-off-by: -
Peng Li authored
For consistency, prefix hnae_ should be modified to hnae3_. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
Reference to Documentation/DMA-API-HOWTO.txt, Streaming DMA mappings which are usually mapped for one DMA transfer, Network card DMA ring descriptors should use Consistent DMA mappings. Signed-off-by:
-
Huazhong Tan authored
Give default option for HNS3_HCLGE and HNS3_ENET will be helpful, while dependency HNS3 is set. Meanwhile, use "if HNS3" section instead of all the "depends on HNS3". Signed-off-by:
-
Huazhong Tan authored
Some members in struct hns3_enet_tqp_vector, struct hnae3_client and struct hnae3_ae_algo are unused. This patch removes them. Signed-off-by:
-
Huazhong Tan authored
Set complete in the first hclge_cmd_csq_done of hclge_cmd_send, and check if complete later, unnecessary to do hclge_cmd_csq_done again. Signed-off-by:
-
Huazhong Tan authored
csq is used as a ring buffer, the value of the desc will be replaced in next use. This patch removes the unnecessary memset, and just updates the next_to_clean. Signed-off-by:
-
Huazhong Tan authored
Remove some redundant assignments. desc->flag = cpu_to_le16(HCLGE_CMD_FLAG_NO_INTR | HCLGE_CMD_FLAG_IN) has set bit HCLGE_CMD_FLAG_WR to zero, so does others. Signed-off-by:
-
Huazhong Tan authored
There are some useless type cast, print in hclge_cmd_send. This patch removes them. Signed-off-by:
-
Huazhong Tan authored
hclge_ring_to_dma_dir is unused anywhere. This patch removes it. Signed-off-by:
-
Colin Ian King authored
Pointer zatm_dev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'zatm_dev' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Heiner Kallweit authored
RTL8211C has an issue when operating in Gigabit slave mode, therefore genphy driver can't be used. See also this U-boot change. https://lists.denx.de/pipermail/u-boot/2016-March/249712.html Add a PHY driver for this chip with the quirk to force Gigabit master mode. As a note: This will make it impossible to connect two network ports directly which both are driven by a RTl8211C. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Guenter Roeck authored
gcc 8.1.0 complains: drivers/isdn/i4l/isdn_tty.c: In function 'isdn_tty_suspend.isra.1': drivers/isdn/i4l/isdn_tty.c:790:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length drivers/isdn/i4l/isdn_tty.c:778:6: note: length computed here drivers/isdn/i4l/isdn_tty.c: In function 'isdn_tty_resume': drivers/isdn/i4l/isdn_tty.c:880:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length drivers/isdn/i4l/isdn_tty.c:817:6: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
