- 06 Jul, 2018 18 commits
-
-
Chris Wilson authored
We test the GPU handling of huge pages by submitting requests that write into a huge page, but if the GPU is irrecoverably wedged we cannot submit any requests. As the test expectedly fails, skip over it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-8-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any requests and so cannot make the GTT busy in order to test evicting active objects. As this expectedly fails, skip over the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any request and therefore cannot query the register state of the context (which is done using the GPU command stream). So skip over the test as it expectedly fails. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedge, we cannot submit any request and so all of the request selftests will expectedly fail. Skip over them. Signed-off-by:
-
Chris Wilson authored
If the GPU is wedged, we cannot make the object busy as trying to submit a request will generate -EIO. Skip to the end of the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably broken, we can not use it to dirty memory and check for cache coherency with the CPU. All we can do is simply skip over the GPU subtests and focus on the CPU domains (WC, WB) cache management. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107127Signed-off-by:
-
Chris Wilson authored
As we keep VMA around until the object is destroyed, when testing partial tiling we instantiate many, many VMA (as the object is huge allowing for many different partial regions). We test elsewhere our handling of populating large objects with a full set of VMA and checking we can retrieve them afterwards, but in this test we incur the cost of flushing all VMA after every GTT write, dramatically slowing down the test. References: https://bugs.freedesktop.org/show_bug.cgi?id=107130Signed-off-by:
-
Chris Wilson authored
Having found the error causing the IGT test to fail, downgrade the verbose logging so that we stop flooding the syslogs as we deliberately provoke it many thousands of time during selftests. References: 10195b1e ("drm/i915: Show vma allocator stack when in doubt") Signed-off-by:
-
Madhav Chauhan authored
This patch defines AUX lane registers for PORT_PCS_DW1, PORT_TX_DW2, PORT_TX_DW4, PORT_TX_DW5 used during dsi enabling. v2: Review comments from Jani N: - Define _ICL_PORT_PCS_DW1_AUX_A for consistency - Three spaces for bitfield definition. Signed-off-by:Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Madhav Chauhan authored
To save power, unused lanes should be powered down using the bitfield of PORT_CL_DW10. v2: Review comments from Jani N - Put default label next to case 4 - Include the shifts in the macros Signed-off-by: -
Madhav Chauhan authored
This register used to power down individual lanes for DDI/DSI ports. Bitfields to power up/down various combinations of lanes are also added in this patch. v2: Review comments from Jani N - Use override instead of "override" for bitfields - Define mask for override bitfield - Define PWR_DOWN_LN* macros shifted in place v3: Correct PWR_DOWN_LN_MASK value (Jani N) Signed-off-by: -
Madhav Chauhan authored
This patch configures mode of operation for DSI and enable DDI IO power by configuring power well. v2: Use for_each_dsi_port() for power get (Jani N) Signed-off-by:
-
Madhav Chauhan authored
This patch defines DSI IO mode control register and it's bits used while enabling IO power for DSI. Signed-off-by:
-
Madhav Chauhan authored
Escape Clock is used for LP communication across the DSI Link. To achieve the constant frequency of the escape clock from the variable DPLL frequency output, a variable divider(M) is needed. This patch programs the same. v2: (Jani N) Don't end line with "(". Signed-off-by: -
Jani Nikula authored
Use the more customary order of latest platform first, and don't bother with an if in the last branch. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid confusion with the functions to be added for the new ICL or gen 11 DSI implementation by renaming the current DSI functions. While at it, permutate the words in the function names to make them all start with "vlv_dsi" or "vlv_dsi_pll" etc. Reduce the platform abstractions in the PLL file while at it, moving the checks to vlv_dsi.c instead, where we typically already have the necessary if ladders. Leave the static functions as-is for now; they could be renamed later if needed. No functional changes. v2: use "gen7" prefix. v3: use "vlv" and "bxt" prefixes, reduce the abstractions. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Starting from ICL or gen 11 we have a new DSI block which requires completely different programming from the current implementation. Having them in the same file would be confusing. Rename the current DSI and DSI PLL implementation files as vlv_dsi.c and vlv_dsi_pll.c. No functional changes. v2: use "gen7" prefix. v3: use "vlv" prefix. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged on startup, it means that it failed on initialisation and we have already tried to reset it but failed. We can ignore all further testing, as it is already dead. Failing early, prevents us from slowly failing in our endeavours later and timing out. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705150214.28316-1-chris@chris-wilson.co.uk
-
- 05 Jul, 2018 8 commits
-
-
Chris Wilson authored
i915_gem_detect_bit_6_swizzle() tries to hide unknown swizzling from userspace (and ourselves) leaving us with the only clue inside i915->quirks & QUIRK_PIN_SWIZZLED_PAGES. If we see this bit set, it means that we really have no clue as to what the swizzle pattern is being used in any one page and so cannot compute what the reference value should be in our tiling selftests. We have to skip the test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107133Signed-off-by:
-
Ville Syrjälä authored
The return value is a bool so we can just return the result of the biwise AND. The compiler will take care of the rest. Signed-off-by:
-
Chris Wilson authored
There's no magic bit0 in MI_BB_START for gen3, it's the same dword length parameter as elsewhere and needs to be zero. v2: Same bug in both live_requests and live_hanghcheck. References: https://bugs.freedesktop.org/show_bug.cgi?id=107132Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 141432 Addresses-Coverity-ID: 141433 Addresses-Coverity-ID: 141434 Addresses-Coverity-ID: 141435 Addresses-Coverity-ID: 141436 Addresses-Coverity-ID: 1357360 Addresses-Coverity-ID: 1357403 Addresses-Coverity-ID: 1357433 Addresses-Coverity-ID: 1392622 Addresses-Coverity-ID: 1415273 Addresses-Coverity-ID: 1435752 Addresses-Coverity-ID: 1441500 Addresses-Coverity-ID: 1454596 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Madhav Chauhan authored
This patch adds the new registers and corresponding bit definitions which will be used for programming/enable DSI PLL. v2: Review comments from Jani N - Fix spaces while defining ICL_ESC_CLK_DIV_MASK - Define shift and mask for bitfields. Signed-off-by: -
Chris Wilson authored
Use i915_address_space_init() rather than open-code it inside mock_ppgtt() as we will forget to keep it in sync. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
We can now use the full release mechanism (i915_ppgtt_put) for our local ppgtt allocation in igt_ppgtt_alloc. Signed-off-by:
-
Chris Wilson authored
No longer used and can be removed. One less global that currently demands struct_mutex protection. References: e9e7dc41 ("drm/i915/gtt: Make gen6 page directories evictable") Signed-off-by:
-
- 04 Jul, 2018 4 commits
-
-
Chris Wilson authored
Currently, the wc-stash used for providing flushed WC pages ready for constructing the page directories is assumed to be protected by the struct_mutex. However, we want to remove this global lock and so must install a replacement global lock for accessing the global wc-stash (the per-vm stash continues to be guarded by the vm). We need to push ahead on this patch due to an oversight in hastily removing the struct_mutex guard around the igt_ppgtt_alloc selftest. No matter, it will prove very useful (i.e. will be required) in the near future. v2: Restore the onstack stash so that we can drop the vm->mutex in future across the allocation. v3: Restore the lost pagevec_init of the onstack allocation, and repaint function names. v4: Reorder init so that we don't try and use i915_address_space before it is ininitialised. Fixes: 1f6f0023 ("drm/i915/selftests: Drop struct_mutex around lowlevel pggtt allocation") Signed-off-by:
-
Ville Syrjälä authored
For whatever reason we only unmask and enable the master error interrut on gen4. With the EIR handling fixed let's do that on gen2/3 as well. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Adjust the EIR clearing to cope with the edge triggered IIR on i965/g4x. To guarantee an edge in the ISR master error bit we temporarily mask everything in EMR. As some of the EIR bits can't even be directly cleared we also borrow a trick from i915_clear_error_registers() and permanently mask any bit that remains high. No real thought given to how we might unmask them again once the cause for the error has been clered. I suppose on pre-g4x GPU reset will reinitialize EMR from scratch. Signed-off-by:
-
Ville Syrjälä authored
Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Jul, 2018 2 commits
-
-
Chris Wilson authored
For a ppgtt that we are constructing, there is no struct_mutex dependence so skip it. In the process, also ping the scheduler frequently to try and avoid the NMI watchdog. v2: gen6 requires struct_mutex to clean up (currently) Suggested-by:
-
Chris Wilson authored
live_gtt is a very slow test to run, simply because it tries to allocate and use as much as the 48b address space as possibly can and in the process will try to own all of the system memory. This leads to resource exhaustion and CPU starvation; the latter impacts us when the NMI watchdog declares a task hung due to a mutex contention with ourselves. This we can prevent by releasing the struct_mutex and forcing our i915/rcu workers to run, and in particular flushing the freed object worker that is the cause for concern. References: https://bugs.freedesktop.org/show_bug.cgi?id=107094Signed-off-by:
-
- 02 Jul, 2018 6 commits
-
-
Tarun Vyas authored
The PIPEDSL freezes on PSR entry and if PSR hasn't fully exited, then the pipe_update_start call schedules itself out to check back later. On ChromeOS-4.4 kernel, which is fairly up-to-date w.r.t drm/i915 but lags w.r.t core kernel code, hot plugging an external display triggers tons of "potential atomic update errors" in the dmesg, on *pipe A*. A closer analysis reveals that we try to read the scanline 3 times and eventually timeout, b/c PSR hasn't exited fully leading to a PIPEDSL stuck @ 1599. This issue is not seen on upstream kernels, b/c for *some* reason we loop inside intel_pipe_update start for ~2+ msec which in this case is more than enough to exit PSR fully, hence an *unstuck* PIPEDSL counter, hence no error. On the other hand, the ChromeOS kernel spends ~1.1 msec looping inside intel_pipe_update_start and hence errors out b/c the source is still in PSR. Regardless, we should wait for PSR exit (if PSR is disabled, we incur a ~1-2 usec penalty) before reading the PIPEDSL, b/c if we haven't fully exited PSR, then checking for vblank evasion isn't actually applicable. v4: Comment explaining psr_wait after enabling VBL interrupts (DK) v5: CAN_PSR() to handle platforms that don't support PSR. v6: Handle local_irq_disable on early return (Chris) Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
-
Tarun Vyas authored
This is a lockless version of the exisiting psr_wait_for_idle(). We want to wait for PSR to idle out inside intel_pipe_update_start. At the time of a pipe update, we should never race with any psr enable or disable code, which is a part of crtc enable/disable. The follow up patch will use this lockless wait inside pipe_update_ start to wait for PSR to idle out before checking for vblank evasion. We need to keep the wait in pipe_update_start to as less as it can be. So,we can live and flourish w/o taking any psr locks at all. Even if psr is never enabled, psr2_enabled will be false and this function will wait for PSR1 to idle out, which should just return immediately, so a very short (~1-2 usec) wait for cases where PSR is disabled. v2: Add comment to explain the 25msec timeout (DK) v3: Rename psr_wait_for_idle to __psr_wait_for_idle_locked to avoid naming conflicts and propagate err (if any) to the caller (Chris) v5: Form a series with the next patch v7: Better explain the need for lockless wait and increase the max timeout to handle refresh rates < 60 Hz (Daniel Vetter) v8: Rebase Acked-by: -
Dhinakaran Pandiyan authored
There is already a check to allow only RGB8888 formats with CCS modifiers. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628061854.6430-1-dhinakaran.pandiyan@intel.com
-
Vathsala Nagaraju authored
Prints live state of psr1.Extending the existing PSR2 live state function to cover psr1. Tested on KBL with psr2 and psr1 panel. v2: rebase v3: DK Rename psr2_live_status to psr_source_status. v4: DK Move EDP_PSR_STATUS_STATE_SHIFT below EDP_PSR_STATUS_STATE_MASK. Pass seq to psr_source_status, handle source status prints in psr_source_status. v5: Fixed CI warning messages v6: Remove extra space in the title before the colon.(DK) Rebase. (Jani) v7: Use tabs for indenting the values.(Jani) v8: Addressed dk's review comments. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:Vathsala Nagaraju <vathsala.nagaraju@intel.com> Signed-off-by:
-
Chris Wilson authored
If the whole object is already pinned by HW for use as scanout, we will fail to move it to the mappable region and so must resort to using a partial VMA covering the whole object. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513 Fixes: aa136d9d ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Try to describe what the pick variants do, and which to prefer. No functional changes. Reviewed-by:
-
- 29 Jun, 2018 2 commits
-
-
Michal Wajdeczko authored
While debugging we may want to examine params passed to GuC. v2: drop #ifdef DEBUG_GUC - Michal Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1 Cc: Michal Winiarski <michal.winiarski@intel.com> Reviewed-by:
Michał Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Chris Wilson authored
make_obj_busy() makes a dummy busy object, but didn't attach the fence to the reservation object, so it would not have registered as busy. For completeness, attach the dummy request as the exclusive fence and mark the object as written (in i915_vma_move_to_active) Signed-off-by:
-
