- 12 May, 2019 1 commit
-
-
Florian Westphal authored
should be same as NFT_LOGLEVEL_AUDIT, so use -, not +. Fixes: 7eced5ab ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 09 May, 2019 2 commits
-
-
Pablo Neira Ayuso authored
Never used anywhere in the code. Fixes: 7e0b2b57 ("netfilter: nft_ct: add ct timeout support") Reported-by:
Stéphane Veyret <sveyret@gmail.com> Signed-off-by:
-
Florian Westphal authored
If userspace provides a rule blob with trailing data after last target, we trigger a splat, then convert ruleset to 64bit format (with trailing data), then pass that to do_replace_finish() which then returns -EINVAL. Erroring out right away avoids the splat plus unneeded translation and error unwind. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
- 06 May, 2019 3 commits
-
-
Taehee Yoo authored
Conntrack entries can be deleted by the masquerade module. In that case, flow offload should be deleted too, but GC and data-path of flow offload do not check for conntrack status bits, hence flow offload entries will be removed only by the timeout. Update garbage collector and data-path to check for ct->status. If IPS_DYING_BIT is set, garbage collector removes flow offload entries and data-path routine ignores them. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
CONFIG_NF_CONNTRACK_IPV6 has been deprecated so replace it with a check for IPV6 instead. Use nf_ip6_route6() instead of v6ops->route() and keep the IS_MODULE() in nf_ipv6_ops as mentioned by Florian so that direct calls are used when IPV6 is builtin and indirect calls are used only when IPV6 is a module. Fixes: a0ae2562 ("netfilter: conntrack: remove l3proto abstraction") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reviewed-by:
-
Kristian Evensen authored
Commit 59c08c69 ("netfilter: ctnetlink: Support L3 protocol-filter on flush") introduced a user-space regression when flushing connection track entries. Before this commit, the nfgen_family field was not used by the kernel and all entries were removed. Since this commit, nfgen_family is used to filter out entries that should not be removed. One example a broken tool is conntrack. conntrack always sets nfgen_family to AF_INET, so after 59c08c69 only IPv4 entries were removed with the -F parameter. Pablo Neira Ayuso suggested using nfgenmsg->version to resolve the regression, and this commit implements his suggestion. nfgenmsg->version is so far set to zero, so it is well-suited to be used as a flag for selecting old or new flush behavior. If version is 0, nfgen_family is ignored and all entries are used. If user-space sets the version to one (or any other value than 0), then the new behavior is used. As version only can have two valid values, I chose not to add a new NFNETLINK_VERSION-constant. Fixes: 59c08c69 ("netfilter: ctnetlink: Support L3 protocol-filter on flush") Reported-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Suggested-by:
Kristian Evensen <kristian.evensen@gmail.com> Tested-by:
-
- 05 May, 2019 3 commits
-
-
Taehee Yoo authored
rhashtable_insert_fast() may return an error value when memory allocation fails, but flow_offload_add() does not check for errors. This patch just adds missing error checking. Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by:
-
Florian Westphal authored
Following splat gets triggered when nfnetlink monitor is running while xtables-nft selftests are running: net/netfilter/nf_tables_api.c:1272 suspicious rcu_dereference_check() usage! other info that might help us debug this: 1 lock held by xtables-nft-mul/27006: #0: 00000000e0f85be9 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1a/0x50 Call Trace: nf_tables_fill_chain_info.isra.45+0x6cc/0x6e0 nf_tables_chain_notify+0xf8/0x1a0 nf_tables_commit+0x165c/0x1740 nf_tables_fill_chain_info() can be called both from dumps (rcu read locked) or from the transaction path if a userspace process subscribed to nftables notifications. In the 'table dump' case, rcu_access_pointer() cannot be used: We do not hold transaction mutex so the pointer can be NULLed right after the check. Just unconditionally fetch the value, then have the helper return immediately if its NULL. In the notification case we don't hold the rcu read lock, but updates are prevented due to transaction mutex. Use rcu_dereference_check() to make lockdep aware of this. Signed-off-by: -
Jakub Jankowski authored
Since commit bc7d811a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function"), NAT traversal for H.323 doesn't work, failing to parse H323-UserInformation. nf_h323_error_boundary() compares contents of the bitstring, not the addresses, preventing valid H.323 packets from being conntrack'd. This looks like an oversight from when CHECK_BOUND macro was converted to a function. To fix it, stop dereferencing bs->cur and bs->end. Fixes: bc7d811a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function") Signed-off-by:
Jakub Jankowski <shasta@toxcorp.com> Signed-off-by:
-
- 30 Apr, 2019 7 commits
-
-
Taehee Yoo authored
nf_flow_offload_ip_hook() and nf_flow_offload_ipv6_hook() do not check ttl value. So, ttl value overflow may occur. Fixes: 97add9f0 ("netfilter: flow table support for IPv4") Fixes: 09952107 ("netfilter: flow table support for IPv6") Signed-off-by:
-
Taehee Yoo authored
flow_offload_alloc() calls nf_route() to get a dst_entry. Internally, nf_route() calls ip_route_output_key() that allocates a dst_entry and holds it. So, a dst_entry should be released by dst_release() if nf_route() is successful. Otherwise, netns exit routine cannot be finished and the following message is printed: [ 257.490952] unregister_netdevice: waiting for lo to become free. Usage count = 1 Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by:
-
Pablo Neira Ayuso authored
This is fixing flow offload for UDP traffic where packets only follow one single direction. The flow_offload_fixup_tcp() mechanism works fine in case that the offloaded entry remains in SYN_RECV state, given sequence tracking is reset and that conntrack handles syn+ack packets as a retransmission, ie. sES + synack => sIG for reply traffic. Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression") Signed-off-by:
-
Florian Westphal authored
When we process a long ruleset of the form chain input { type filter hook input priority filter; policy drop; ... } Then the base chain gets registered early on, we then continue to process/validate the next messages coming in the same transaction. Problem is that if the base chain policy is 'drop', it will take effect immediately, which causes all traffic to get blocked until the transaction completes or is aborted. Fix this by deferring the policy until the transaction has been processed and all of the rules have been flagged as active. Reported-by:Jann Haber <jann.haber@selfnet.de> Signed-off-by:
-
Eric Dumazet authored
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Suryaputra authored
When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by:Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
Eric Dumazet authored
Richard and Bruno both reported that my commit added a bug, and Bruno was able to determine the problem came when a segment wih a FIN packet was coalesced to a prior one in tcp backlog queue. It turns out the header prediction in tcp_rcv_established() looks back to TCP headers in the packet, not in the metadata (aka TCP_SKB_CB(skb)->tcp_flags) The fast path in tcp_rcv_established() is not supposed to handle a FIN flag (it does not call tcp_fin()) Therefore we need to make sure to propagate the FIN flag, so that the coalesced packet does not go through the fast path, the same than a GRO packet carrying a FIN flag. While we are at it, make sure we do not coalesce packets with RST or SYN, or if they do not have ACK set. Many thanks to Richard and Bruno for pinpointing the bad commit, and to Richard for providing a first version of the fix. Fixes: 4f693b55 ("tcp: implement coalescing on backlog queue") Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Reported-by:
Bruno Prémont <bonbons@sysophe.eu> Signed-off-by:
-
- 29 Apr, 2019 3 commits
-
-
Willem de Bruijn authored
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2019-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2019-04-25 An update from ieee802154 for your *net* tree. Another fix from Kangjie Lu to ensure better checking regmap updates in the mcr20a driver. Nothing else I have pending for the final release. If there are any problems let me know. ==================== Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== * fix use-after-free in mac80211 TXQs * fix RX STBC byte order * fix debugfs rename crashing due to ERR_PTR() * fix missing regulatory notification ==================== Signed-off-by:
-
- 28 Apr, 2019 4 commits
-
-
Paolo Abeni authored
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by:
Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: fix data copies in tls_device_reencrypt() This series fixes the tls_device_reencrypt() which is broken if record starts in the frags of the message skb. ==================== Signed-off-by: -
Jakub Kicinski authored
Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
There is no guarantee the record starts before the skb frags. If we don't check for this condition copy amount will get negative, leading to reads and writes to random memory locations. Familiar hilarity ensues. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
-
- 27 Apr, 2019 7 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Misc. bug fixes. 6 miscellaneous bug fixes covering several issues in error code paths, a setup issue for statistics DMA, and an improvement for setting up multicast address filters. Please queue these for stable as well. Patch #5 (bnxt_en: Fix statistics context reservation logic) is for the most recent 5.0 stable only. Thanks. ==================== Signed-off-by: -
Michael Chan authored
In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle the buffers and jump to the end where the uninitailized variable "len" is referenced. Fix it by adding a new jump label that will skip the length update. This is the most correct fix since the length may not be valid when we get this type of error. Fixes: 6a8788f2 ("bnxt_en: add support for software dynamic interrupt moderation") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Michael Chan authored
In an earlier commit that fixes the number of stats contexts to reserve for the RDMA driver, we added a function parameter to pass in the number of stats contexts to all the relevant functions. The passed in parameter should have been used to set the enables field of the firmware message. Fixes: 780baad4 ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by:
-
Michael Chan authored
If driver determines that extended TX port statistics are not supported or allocation of the data structure fails, make sure to pass 0 TX stats size to firmware to disable it. The firmware returned TX stats size should also be set to 0 for consistency. This will prevent bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in case there is mismatch between firmware and driver. Fixes: 36e53349 ("bnxt_en: Add additional extended port statistics.") Signed-off-by:
-
Michael Chan authored
If we encounter errors during open and proceed to clean up, bnxt_hwrm_ring_free() may crash if the rings we try to free have never been allocated. bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx() may reference pointers that have not been allocated. Fix it by checking for valid fw_ring_id first before calling bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx(). Fixes: 2c61d211 ("bnxt_en: Add helper functions to get firmware CP ring ID.") Signed-off-by:
-
Vasundhara Volam authored
In the bnxt_init_one() error path, short FW command request memory is not freed. This patch fixes it. Fixes: e605db80 ("bnxt_en: Support for Short Firmware Message") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Michael Chan authored
The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
-
- 26 Apr, 2019 10 commits
-
-
Andrew Lunn authored
marvell_get_sset_count() returns how many statistics counters there are. If the PHY supports fibre, there are 3, otherwise two. marvell_get_strings() does not make this distinction, and always returns 3 strings. This then often results in writing past the end of the buffer for the strings. Fixes: 2170fef7 ("Marvell phy: add field to get errors from fiber link.") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Marcel Holtmann authored
When allocating the next family->id it makes more sense to use idr_alloc_cyclic to avoid re-using a previously used family->id as much as possible. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Bjørn Mork authored
Adding device entries found in vendor modified versions of this driver. Function maps for some of the devices follow: WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918) MI_00 Qualcomm HS-USB Diagnostics MI_01 Android Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm Wireless HS-USB Ethernet Adapter MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms WNC D18 LTE CAT3 module (1435:d182) MI_00 Qualcomm HS-USB Diagnostics MI_01 Androd Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm HS-USB NMEA MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device ZM8510/ZM8620/ME3960 (19d2:0396) MI_00 ZTE Mobile Broadband Diagnostics Port MI_01 ZTE Mobile Broadband AT Port MI_02 ZTE Mobile Broadband Modem MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan) MI_04 ZTE Mobile Broadband ADB Port ME3620_X (19d2:1432) MI_00 ZTE Diagnostics Device MI_01 ZTE UI AT Interface MI_02 ZTE Modem Device MI_03 ZTE Mobile Broadband Network Adapter MI_04 ZTE Composite ADB Interface Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Fabien Dessenne authored
Manage the -EPROBE_DEFER error case for "stm32_pwr_wakeup" IRQ. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Eric Dumazet authored
Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9ad ("il2tp: fix races with tunnel socket close") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by: -
Peter Zijlstra authored
Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant. Cc: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Paul Chaignon authored
The first test case, for pointer null checks, is equivalent to the following pseudo-code. It checks that the verifier does not complain on line 6 and recognizes that ptr isn't null. 1: ptr = bpf_map_lookup_elem(map, &key); 2: ret = subprog(ptr) { 3: return ptr != NULL; 4: } 5: if (ret) 6: value = *ptr; The second test case, for packet bound checks, is equivalent to the following pseudo-code. It checks that the verifier does not complain on line 7 and recognizes that the packet is at least 1 byte long. 1: pkt_end = ctx.pkt_end; 2: ptr = ctx.pkt + 8; 3: ret = subprog(ptr, pkt_end) { 4: return ptr <= pkt_end; 5: } 6: if (ret) 7: value = *(u8 *)ctx.pkt; Signed-off-by:Paul Chaignon <paul.chaignon@orange.com> Signed-off-by:
-
Paul Chaignon authored
In case of a null check on a pointer inside a subprog, we should mark all registers with this pointer as either safe or unknown, in both the current and previous frames. Currently, only spilled registers and registers in the current frame are marked. Packet bound checks in subprogs have the same issue. This patch fixes it to mark registers in previous frames as well. A good reproducer for null checks looks as follow: 1: ptr = bpf_map_lookup_elem(map, &key); 2: ret = subprog(ptr) { 3: return ptr != NULL; 4: } 5: if (ret) 6: value = *ptr; With the above, the verifier will complain on line 6 because it sees ptr as map_value_or_null despite the null check in subprog 1. Note that this patch fixes another resulting bug when using bpf_sk_release(): 1: sk = bpf_sk_lookup_tcp(...); 2: subprog(sk) { 3: if (sk) 4: bpf_sk_release(sk); 5: } 6: if (!sk) 7: return 0; 8: return 1; In the above, mark_ptr_or_null_regs will warn on line 6 because it will try to free the reference state, even though it was already freed on line 3. Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Signed-off-by: -
Matteo Croce authored
Some binaries are generated when building libbpf from tools/lib/bpf/, namely libbpf.so.0.0.2 and libbpf.so.0. Add them to the local .gitignore. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reviewed-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
