- 06 Dec, 2011 13 commits
-
-
Alan Cox authored
If we are the console then a printk can hit us with a spin lock held (and in fact the kernel will do its best to take the console printing lock). In that case we cannot politely sleep when synching after an accelerated op but must behave obnoxiously to be sure of getting the bits out. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alan Cox authored
Initial changes to get backlight behaviour we want and to fix backlight crashes on suspend/resume paths. [Note: on some boxes this will now produce a warning about the backlight, this isn't a regression it's an unfixed but non harmful case I still need to nail] Signed-off-by:
-
Alan Cox authored
During the power split ups and work a chunk of code escaped into the Poulsbo code path which it isn't for. On some devices such as the Dell mini-10 this causes problems. Signed-off-by:
-
Akshay Joshi authored
Convert the spaces within the accel_2d.c file to tabs in order to comply with the coding style of the kernel. Signed-off-by:
Akshay Joshi <me@akshayjoshi.com> [Trimmed to subset relevant to current tree] Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Patrik Jakobsson authored
Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Patrik Jakobsson authored
Chipset reports MSI capabilities for Poulsbo even though it isn't really there. Signed-off-by:
-
Patrik Jakobsson authored
First step in adding proper irq handling. We'll start with poulsbo support so make sure other chips don't touch drm_irq_install(). Signed-off-by:
-
Alan Cox authored
This isn't actually usable - we simply don't have the vmap space on a 32bit system to do this stunt. Instead we will rely on the low level drivers limiting the console resolution as before. The real fix is for someone to write a page table aware version of the framebuffer console blit functions. Good university student project perhaps.. Signed-off-by:
-
Alan Cox authored
Finally move the API where it can be seen Signed-off-by:
-
Alan Cox authored
We don't want this external in case someone adds more to the hardware. We want it out of the ABI. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
At this point we won't add an external set of definitions. We want to get everything out before we admit to a public API beyond the standardised ones. Signed-off-by:
-
- 01 Dec, 2011 1 commit
-
-
Ville Syrjälä authored
Name the formats as DRM_FORMAT_X instead of DRM_FOURCC_X. Use consistent names, especially for the RGB formats. Component order and byte order are now strictly specified for each format. The RGB format naming follows a convention where the components names and sizes are listed from left to right, matching the order within a single pixel from most significant bit to least significant bit. The YUV format names vary more. For the 4:2:2 packed formats and 2 plane formats use the fourcc. For the three plane formats the name includes the plane order and subsampling information using the standard subsampling notation. Some of those also happen to match the official fourcc definition. The fourccs for for all the RGB formats and some of the YUV formats I invented myself. The idea was that looking at just the fourcc you get some idea what the format is about without having to decode it using some external reference. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 29 Nov, 2011 2 commits
-
-
Dave Airlie authored
This is used by nearly everyone including vmwgfx which doesn't generally use the fb helper. Signed-off-by: -
Dave Airlie authored
Commit 308e5bcb ("drm: add an fb creation ioctl that takes a pixel format v5") missed one spot needing to be fixed up in the __BIG_ENDIAN case. Fixes build error: drivers/gpu/drm/radeon/radeon_fb.c: In function 'radeonfb_create_pinned_object': drivers/gpu/drm/radeon/radeon_fb.c:144:18: error: 'struct drm_mode_fb_cmd2' has no member named 'bpp' Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 28 Nov, 2011 3 commits
-
-
Ilija Hadzic authored
fops field in drm_driver is a pointer to file_operations struct, not embedded structure Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
-
Ilija Hadzic authored
psb_gfx.mod.c is a generated file and should not be revision controlled Signed-off-by:
-
Dave Airlie authored
This takes over the staging change into the mainline driver. Fixes -next part one. Signed-off-by:
-
- 25 Nov, 2011 1 commit
-
-
Jesse Barnes authored
Here's a patch to move things over to the new addfb2 interfaces at least. Signed-off-by:
-
- 16 Nov, 2011 14 commits
-
-
Dave Airlie authored
* drm-gma500-alanc: gma500: Now connect up to the DRM build to finish the job gma500: fixup build versus latest header changes. gma500: Add support for Cedarview gma500: Add Oaktrail support gma500: Add Poulsbo support gma500: Add the core DRM files and headers gma500: Add the i2c bus support gma500: Add the glue to the various BIOS and firmware interfaces gma500: Add device framework gma500: introduce the framebuffer support code gma500: introduce the GTT and MMU handling logic gma500: GEM and GEM glue gma500: Move the basic driver out of staging
-
Alan Cox authored
Signed-off-by:
-
Dave Airlie authored
Signed-off-by: -
Alan Cox authored
Again this is similar but has some differences so we have a set of plug in support. This does make the driver bigger than is needed in some respects but the tradeoff for maintainability is huge. Signed-off-by:
-
Alan Cox authored
Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit different to the GMA500 but similar enough it makes sense to plug it into the same driver. Signed-off-by:
-
Alan Cox authored
This provides the specific code for Poulsbo, some of which is also used for the later chipsets. We support the GTT, the 2D engine (for console), and the display setup/management. We do not support 3D or the video overlays. In theory enough public info is available to do the video overlay work but that represents a large task. Framebuffer X will run nicely with this but do *NOT* use the VESA X server at the same time as KMS. With a Dell mini 10 things like Xfce4 are nice and usable even when compositing as the CPU has a good path to the memory. Signed-off-by:
-
Alan Cox authored
Not really a nice way to split this up further for submission. This provides all the DRM interfacing logic, the headers and relevant glue. Signed-off-by:
-
Alan Cox authored
Again this might be a candidate for sharing later. Signed-off-by:
-
Alan Cox authored
Some of this should one day become a library shared by i915 and gma500 I suspct. Best however to deal with that later once it is all nice and stably merged. Signed-off-by:
-
Alan Cox authored
The devices have various internal differences so we have some abstractions to hide the ugly differences and we then wrap them up in standard interfaces. Add these bits Signed-off-by:
-
Alan Cox authored
We support 2D acceleration on some devices but we try and do tricks with the GTT as a starting point as this is far faster. The GTT logic could be improved further but for most display sizes it already makes a pretty good decision. Signed-off-by:
-
Alan Cox authored
This fits alongside the GEM support to manage our resources on the card itself. It's not actually clear we need to configure the MMU at all. Further research is needed before removing it entirely. For now we suck it in (slightly abused) from the old semi-free driver. Signed-off-by:
-
Alan Cox authored
The driver uses GEM along with a couple of small bits of wrapping of its own. The only real oddity here is the support for using the 'stolen' memory rather than wasting several MB. We use a simple resource manager as we don't need to manage our space intensively at all as we only do 2D work. We also have a GTT which is entirely GPU facing so in the Cedarview case are not even allocating from host address space. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Alan Cox authored
This driver supports unaccelerated KMS display, and accelerated console handling on the Intel Poulsbo, Oaktrail, Cedarview and Medfield hardware. For the initial merge Medfield will be left out as it needs considerable further work to reach a decent standard Begin by adding the Makefiles and Kconfig. These are not yet plumbed into the DRM layer so will have no effect on their own Signed-off-by:
-
- 15 Nov, 2011 3 commits
-
-
Dave Airlie authored
* drm-plane-jbarnes: drm: add an fb creation ioctl that takes a pixel format v5 drm: add plane support v3
-
Jesse Barnes authored
To properly support the various plane formats supported by different hardware, the kernel must know the pixel format of a framebuffer object. So add a new ioctl taking a format argument corresponding to a fourcc name from the new drm_fourcc.h header file. Implement the fb creation hooks in terms of the new mode_fb_cmd2 using helpers where the old bpp/depth values are needed. v2: create DRM specific fourcc header file for sharing with libdrm etc v3: fix rebase failure and use DRM fourcc codes in intel_display.c and update commit message v4: make fb_cmd2 handle field into an array for multi-object formats pull in Ville's fix for the memcpy in drm_plane_init apply Ville's cleanup to zero out fb_cmd2 arg in drm_mode_addfb v5: add 'flags' field for interlaced support (from Ville) Signed-off-by:Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by:
Rob Clark <rob.clark@linaro.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Jesse Barnes authored
Planes are a bit like half-CRTCs. They have a location and fb, but don't drive outputs directly. Add support for handling them to the core KMS code. v2: fix ABI of get_plane - move format_type_ptr to the end v3: add 'flags' field for interlaced support (from Ville) Acked-by:
-
- 11 Nov, 2011 1 commit
-
-
Arjan van de Ven authored
From fdf1fdebaa00f81de18c227f32f8074c8b352d50 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven <arjan@linux.intel.com> Date: Sun, 30 Oct 2011 19:06:07 -0700 Subject: [PATCH] drm: Make the per-driver file_operations struct const The DRM layer keeps a copy of struct file_operations inside its big driver struct... which prevents it from being consistent and static. For consistency (and the general security objective of having such things static), it's desirable to get this fixed. This patch splits out the file_operations field to its own struct, which is then "static const", and just stick a pointer to this into the driver struct, making it more consistent with how the rest of the kernel does this. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
- 10 Nov, 2011 1 commit
-
-
Hugh Dickins authored
Add a check for panic_timeout in the drm_fb_helper_panic() notifier: if we're going to reboot immediately, the user will not be able to see the messages anyway, and messing with the video mode may display artifacts, and certainly get into several layers of complexity (including mutexes and memory allocations) which we shall be much safer to avoid. Signed-off-by:
Hugh Dickins <hughd@google.com> [ Edited commit message and modified to short-circuit panic_timeout < 0 instead of testing panic_timeout >= 0. -Mandeep ] Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
-
- 08 Nov, 2011 1 commit
-
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
