- 28 Jan, 2020 1 commit
-
-
Marc Zyngier authored
We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by:
Marc Zyngier <maz@kernel.org> Reported-by:
Heyi Guo <guoheyi@huawei.com> Tested-by:
-
- 22 Jan, 2020 14 commits
-
-
Marc Zyngier authored
Just like for INVALL, GICv4.1 has grown a VPE-aware INVLPI register. Let's plumb it in and make use of the DirectLPI code in that case. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-16-maz@kernel.org
-
Marc Zyngier authored
Since GICv4.1 gives us a per-VPE doorbell, avoid programming anything else on VMOVI/VMAPI/VMAPTI and on any other action that would have otherwise resulted in a per-VLPI doorbell to be programmed. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 redistributors have a VPE-aware INVALL register. Progress! We can now emulate a guest-requested INVALL without emiting a VINVALL command. Signed-off-by:
-
Marc Zyngier authored
When descheduling a VPE, special care must be taken to tell the GIC about whether we want to receive a doorbell or not. This is a major improvement on GICv4.0, where the doorbell had to be separately enabled/disabled. Signed-off-by:
-
Marc Zyngier authored
Making a VPE resident on GICv4.1 is pretty simple, as it is just a single write to the local redistributor. We just need extra information about which groups to enable, which the KVM code will have to provide. Signed-off-by:
-
Marc Zyngier authored
masking/unmasking doorbells on GICv4.1 relies on a new INVDB command, which broadcasts the invalidation to all RDs. Implement the new command as well as the masking callbacks, and plug the whole thing into the v4.1 VPE irqchip. Signed-off-by:
-
Marc Zyngier authored
Just like for GICv4.0, each VPE has its own doorbell interrupt, and thus an irqchip that manages them. Since the doorbell management is quite different on GICv4.1, let's introduce an almost empty irqchip the will get populated over the next new patches. Signed-off-by:
-
Marc Zyngier authored
With GICv4.1, VMOVP is extended to allow a default doorbell to be specified, as well as a validity bit for this doorbell. As an added bonus, VMOVP isn't required anymore of moving a VPE between redistributors that share the same affinity. Let's add this support to the VMOVP builder, and make sure we don't issue the command if we don't really need to. Signed-off-by:
-
Marc Zyngier authored
The infamous VPE proxy device isn't used with GICv4.1 because: - we can invalidate any LPI from the DirectLPI MMIO interface - the ITS and redistributors understand the life cycle of the doorbell, so we don't need to enable/disable it all the time So let's escape early from the proxy related functions. Signed-off-by:
-
Marc Zyngier authored
The ITS VMAPP command gains some new fields with GICv4.1: - a default doorbell, which allows a single doorbell to be used for all the VLPIs routed to a given VPE - a pointer to the configuration table (instead of having it in a register that gets context switched) - a flag indicating whether this is the first map or the last unmap for this particular VPE - a flag indicating whether the pending table is known to be zeroed, or not Plumb in the new fields in the VMAPP builder, and add the map/unmap refcounting so that the ITS can do the right thing. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 defines a new VPE table that is potentially shared between both the ITSs and the redistributors, following complicated affinity rules. To make things more confusing, the programming of this table at the redistributor level is reusing the GICv4.0 GICR_VPROPBASER register for something completely different. The code flow is somewhat complexified by the need to respect the affinities required by the HW, meaning that tables can either be inherited from a previously discovered ITS or redistributor. Signed-off-by:
-
Marc Zyngier authored
While GICv4.0 mandates 16 bit worth of VPEIDs, GICv4.1 allows smaller implementations to be built. Add the required glue to dynamically compute the limit. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 supports the RVPEID ("Residency per vPE ID"), which allows for a much efficient way of making virtual CPUs resident (to allow direct injection of interrupts). The functionnality needs to be discovered on each and every redistributor in the system, and disabled if the settings are inconsistent. Signed-off-by: -
Marc Zyngier authored
When updating an LPI configuration, get_vlpi_map() may be passed a irq_data structure relative to an ITS domain (the normal case) or one that is relative to the core GICv3 domain in the case of a GICv4 doorbell. In the latter case, special care must be take not to dereference the irq_chip data as an its_dev structure, as that isn't what is stored there. Instead, check *first* whether the IRQ is forwarded to a vcpu, and only then try to obtain the vlpi mapping. Fixes: c1d4d5cd ("irqchip/gic-v3-its: Add its_vlpi_map helpers") Signed-off-by:
-
- 20 Jan, 2020 15 commits
-
-
Kevin Hao authored
Fix a memory leak reported by kmemleak: unreferenced object 0xffff000bc6f50e80 (size 128): comm "kworker/23:2", pid 201, jiffies 4294894947 (age 942.132s) hex dump (first 32 bytes): 00 00 00 00 41 00 00 00 86 c0 03 00 00 00 00 00 ....A........... 00 a0 b2 c6 0b 00 ff ff 40 51 fd 10 00 80 ff ff ........@Q...... backtrace: [<00000000e62d2240>] kmem_cache_alloc_trace+0x1a4/0x320 [<00000000279143c9>] irq_domain_push_irq+0x7c/0x188 [<00000000d9f4c154>] thunderx_gpio_probe+0x3ac/0x438 [<00000000fd09ec22>] pci_device_probe+0xe4/0x198 [<00000000d43eca75>] really_probe+0xdc/0x320 [<00000000d3ebab09>] driver_probe_device+0x5c/0xf0 [<000000005b3ecaa0>] __device_attach_driver+0x88/0xc0 [<000000004e5915f5>] bus_for_each_drv+0x7c/0xc8 [<0000000079d4db41>] __device_attach+0xe4/0x140 [<00000000883bbda9>] device_initial_probe+0x18/0x20 [<000000003be59ef6>] bus_probe_device+0x98/0xa0 [<0000000039b03d3f>] deferred_probe_work_func+0x74/0xa8 [<00000000870934ce>] process_one_work+0x1c8/0x470 [<00000000e3cce570>] worker_thread+0x1f8/0x428 [<000000005d64975e>] kthread+0xfc/0x128 [<00000000f0eaa764>] ret_from_fork+0x10/0x18 Fixes: 495c38d3 ("irqdomain: Add irq_domain_{push,pop}_irq() functions") Signed-off-by:Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Joakim Zhang authored
The Interrupt Multiplexer (INTMUX) expands the number of peripherals that can interrupt the core: * The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots. * Each INTMUX channel can receive up to 32 interrupt sources and has 1 interrupt output. * The INTMUX routes the interrupt sources to the interrupt outputs. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Joakim Zhang authored
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer for i.MX8 family SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200117060653.27485-2-qiangqing.zhang@nxp.com
-
Hyunki Koo authored
This patch is written to clean up dependency of ARCH_EXYNOS Not all exynos device have IRQ_COMBINER, especially aarch64 EXYNOS but it is built for all exynos devices. Thus add the config for EXYNOS_IRQ_COMBINER remove direct dependency between ARCH_EXYNOS and exynos-combiner.c and only selected on the aarch32 devices Signed-off-by:
Hyunki Koo <hyunki00.koo@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191224211108.7128-1-hyunki00.koo@gmail.com
-
Qianggui Song authored
The meson a1 Socs have some changes compared with previous chips. For A113L, it contains 62 pins and can be spied on: - 62:128 undefined - 61:50 12 pins on bank A - 49:37 13 pins on bank F - 36:20 17 pins on bank X - 19:13 7 pins on bank B - 12:0 13 pins on bank P There are five relative registers for gpio interrupt controller, details are as below: - PADCTRL_GPIO_IRQ_CTRL0 bit[31]: enable/disable the whole irq lines bit[16-23]: both edge trigger bit[8-15]: single edge trigger bit[0-7]: pol trigger - PADCTRL_GPIO_IRQ_CTRL[X] bit[0-6]: 7 bits to choose gpio source for irq line 2*[X] - 2 bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1 where X =1,2,3,4 Signed-off-by:
Qianggui Song <qianggui.song@amlogic.com> Signed-off-by:
-
Qianggui Song authored
Since Meson-A1 SoCs register layout of gpio interrupt controller has difference with previous chips, registers to decide irq line and offset of trigger method are all changed, the current driver should be modified. Signed-off-by:
-
Qianggui Song authored
Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs Signed-off-by:
-
John Garry authored
The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
-
Eddie James authored
The Aspeed SOCs provide some interrupts through the System Control Unit registers. Add an interrupt controller that provides these interrupts to the system. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
-
Eddie James authored
Document the Aspeed SCU interrupt controller and add an include file for the interrupts it provides. Signed-off-by:
-
Yash Shah authored
Adds the GPIO driver for SiFive RISC-V SoCs. Signed-off-by:
Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Yash Shah <yash.shah@sifive.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1575976274-13487-6-git-send-email-yash.shah@sifive.com
-
Yash Shah authored
DT json-schema for GPIO controller added. Signed-off-by:
-
Yash Shah authored
Add support for hierarchical irq domains. This is needed as pre-requisite for gpio-sifive driver. Signed-off-by:
-
Yash Shah authored
Make use of newly introduced irq_domain_translate_onecell() instead of custom made function. Signed-off-by:
-
Yash Shah authored
Add a new function irq_domain_translate_onecell() that is to be used as the translate function in struct irq_domain_ops. Signed-off-by:
-
- 29 Dec, 2019 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "One important fix for RISC-V: - Redirect any incoming syscall with an ID less than -1 to sys_ni_syscall, rather than allowing them to fall through into the syscall handler. and two minor build fixes: - Export __asm_copy_{from,to}_user() from where they are defined. This fixes a build error triggered by some randconfigs. - Export flush_icache_all(). I'd resisted this before, since historically we didn't want modules to be able to flush the I$ directly; but apparently everyone else is doing it now" * tag 'riscv/for-v5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU -
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull /proc/locks formatting fix from Jeff Layton: "This is a trivial fix for a _very_ long standing bug in /proc/locks formatting. Ordinarily, I'd wait for the merge window for something like this, but it is making it difficult to validate some overlayfs fixes. I've also gone ahead and marked this for stable" * tag 'locks-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: print unsigned ino in /proc/locks
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "One performance fix for large directory searches, and one minor style cleanup noticed by Clang" * tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Optimize readdir on reparse points cifs: Adjust indentation in smb2_open_file
-
Amir Goldstein authored
An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org>
-
- 28 Dec, 2019 4 commits
-
-
Olof Johansson authored
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com>
-
David Abdurachmanov authored
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by:
David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 5340627e ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by:
-
Luc Van Oostenryck authored
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1e ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by:
kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four fixes and one spelling update, all in drivers: two in lpfc and the rest in mp3sas, cxgbi and target" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: Fix protection error with blocks greater than 512B scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy() scsi: lpfc: fix spelling mistakes of asynchronous scsi: lpfc: fix build failure with DEBUGFS disabled scsi: mpt3sas: Fix double free in attach error handling
-
- 27 Dec, 2019 1 commit
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Post-xmas food coma recovery fixes. Only three fixes for i915 since I expect most people are holidaying. i915: - power management rc6 fix - framebuffer tracking fix - display power management ratelimit fix" * tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm: drm/i915: Hold reference to intel_frontbuffer as we track activity drm/i915/gt: Ratelimit display power w/a drm/i915/pmu: Ensure monotonic rc6
-
