KVM lapic timer and tsc deadline timer based on hrtimer,
setting a leftmost node to rb tree and then do hrtimer reprogram.
If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram
do nothing and then make kvm lapic timer and tsc deadline timer fail.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

interrupt_bitmap is KVM_NR_INTERRUPTS bits in size,
so just use that instead of hard-coded constants
and math.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Optimize "rep ins" by allowing emulator to write back more than one
datum at a time. Introduce new operand type OP_MEM_STR which tells
writeback() that dst contains pointer to an array that should be written
back as opposite to just one data element.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Remove unneeded segment argument. Address structure already has correct
segment which was put there during decode.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Current code assumes that IO exit was due to instruction emulation
and handles execution back to emulator directly. This patch adds new
userspace IO exit completion callback that can be set by any other code
that caused IO exit to userspace.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Other arches do not need this.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

v2: fix incorrect deletion of mmio sptes on gpa move (noticed by Takuya)
Signed-off-by: Avi Kivity <avi@redhat.com>

PPC must flush all translations before the new memory slot
is visible.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Introducing kvm_arch_flush_shadow_memslot, to invalidate the
translations of a single memory slot.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

We never modify direct_access_msrs[], msrpm_ranges[],
svm_exit_handlers[] or x86_intercept_map[] at runtime.
Mark them r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

We use vmcs_field_to_offset_table[], kvm_vmx_segment_fields[] and
kvm_vmx_exit_handlers[] as lookup tables only -- make them r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

We never change those, make them r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

We never change emulate_ops[] at runtime so it should be r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

The opcode tables never change at runtime, therefor mark them const.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

As the the compiler ensures that the memory operand is always aligned
to a 16 byte memory location, use the aligned variant of MOVDQ for
read_sse_reg() and write_sse_reg().
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Some fields can be constified and/or made static to reduce code and data
size.

Numbers for a 32 bit build:

        text    data     bss     dec     hex filename
before: 3351      80       0    3431     d67 cpuid.o
 after: 3391       0       0    3391     d3f cpuid.o
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

kvm_pic_reset() is not used anywhere. Move reset logic from
pic_ioport_write() there.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

We will enter the guest with G and D cleared; as real hardware ignores D in
real mode, and G is taken care of by the limit test, we allow more code to
run in vm86 mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

While this is undocumented, real processors do not reload the segment
limit and access rights when loading a segment register in real mode.
Real programs rely on it so we need to comply with this behaviour.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

emulate_invalid_guest_state=1 doesn't mean we don't munge the segments in the
vmcs; we do.  So we need to return the real ones (maintained by vmx_set_segment).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

We want the segment selector, nor segment number.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Segment limits are verified in real mode, not just protected mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

When loading a segment in real mode, only the base and selector must
be modified.  The limit needs to be left alone, otherwise big real mode
users will hit a #GP due to limit checking (currently this is suppressed
because we don't check limits in real mode).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Usually, big real mode uses large (4GB) segments.  Currently we don't
virtualize this; if any segment has a limit other than 0xffff, we emulate.
But if we set the vmx-visible limit to 0xffff, we can use vm86 to virtualize
real mode; if an access overruns the segment limit, the guest will #GP, which
we will trap and forward to the emulator.  This results in significantly
faster execution, and less risk of hitting an unemulated instruction.

If the limit is less than 0xffff, we retain the existing behaviour.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Real mode is always entered from protected mode with dpl=0.  Since
the dpl doesn't affect execution, and we already override it to 3
in the vmcs (as vmx requires), we can allow execution in that state.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Real processors don't change segment limits and attributes while in
real mode.  Mimic that behaviour.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Instead of using struct kvm_save_segment, use struct kvm_segment, which is what
the other APIs use.  This leads to some simplification.

We replace save_rmode_seg() with a call to vmx_save_segment().  Since this depends
on rmode.vm86_active, we move the call to before setting the flag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

fix_pmode_dataseg() looks up S in ->base instead of ->ar_bytes.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Commit b246dd5d ("KVM: VMX: Fix KVM_SET_SREGS with big real mode
segments") moved fix_rmode_seg() to vmx_set_segment(), so that it is
applied not just on transitions to real mode, but also on KVM_SET_SREGS
(migration).  However fix_rmode_seg() not only munges the vmcs segments,
it also sets up the save area for us to restore when returning to
protected mode or to return in vmx_get_segment().

Move saving the segment into a new function, save_rmode_seg(), and
call it just during the transition.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Instead of populating the entire register file, read in registers
as they are accessed, and write back only the modified ones.  This
saves a VMREAD and VMWRITE on Intel (for rsp, since it is not usually
used during emulation), and a two 128-byte copies for the registers.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

The build error was caused by that builtin functions are calling
the functions implemented in modules. This error was introduced by
commit 4d8b81ab ("KVM: introduce readonly memslot").

The patch fixes the build error by moving function __gfn_to_hva_memslot()
from kvm_main.c to kvm_host.h and making that "inline" so that the
builtin function (kvmppc_h_enter) can use that.
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Merging critical fixes from upstream required for development.

* upstream/master: (809 commits)
  libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
  Revert "powerpc: Update g5_defconfig"
  powerpc/perf: Use pmc_overflow() to detect rolled back events
  powerpc: Fix VMX in interrupt check in POWER7 copy loops
  powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
  powerpc: Fix personality handling in ppc64_personality()
  powerpc/dma-iommu: Fix IOMMU window check
  powerpc: Remove unnecessary ifdefs
  powerpc/kgdb: Restore current_thread_info properly
  powerpc/kgdb: Bail out of KGDB when we've been triggered
  powerpc/kgdb: Do not set kgdb_single_step on ppc
  powerpc/mpic_msgr: Add missing includes
  powerpc: Fix null pointer deref in perf hardware breakpoints
  powerpc: Fixup whitespace in xmon
  powerpc: Fix xmon dl command for new printk implementation
  xfs: check for possible overflow in xfs_ioc_trim
  xfs: unlock the AGI buffer when looping in xfs_dialloc
  xfs: fix uninitialised variable in xfs_rtbuf_get()
  powerpc/fsl: fix "Failed to mount /dev: No such device" errors
  powerpc/fsl: update defconfigs
  ...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for various ARM platforms.  About half of these are for OMAP
  and submitted before but did not make it into v3.6-rc2."

* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: don't select LEDS_GPIO for snowball
  ARM: imx: build i.MX6 functions only when needed
  ARM: imx: select CPU_FREQ_TABLE when needed
  ARM: imx: fix ksz9021rn_phy_fixup
  ARM: imx: build pm-imx5 code only when PM is enabled
  ARM: omap: allow building omap44xx without SMP
  ARM: dts: imx51-babbage: fix esdhc cd/wp properties
  ARM: imx6: spin the cpu until hardware takes it down
  ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
  ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
  ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
  ARM: Kirkwood: fix Makefile.boot
  ARM: Kirkwood: Fix iconnect leds
  ARM: Orion: Set eth packet size csum offload limit
  ARM: mv78xx0: fix win_cfg_base prototype
  ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
  ARM: mmp: fix potential NULL dereference
  ARM: OMAP4: Register the OPP table only for 4430 device
  cpufreq: OMAP: Handle missing frequency table on SMP systems
  ARM: OMAP4: sleep: Save the complete used register stack frame
  ...

Merge tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull three xen bug-fixes from Konrad Rzeszutek Wilk:
 - Revert the kexec fix which caused on non-kexec shutdowns a race.
 - Reuse existing P2M leafs - instead of requiring to allocate a large
   area of bootup virtual address estate.
 - Fix a one-off error when adding PFNs for balloon pages.

* tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.
  xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
  Revert "xen PVonHVM: move shared_info to MMIO before kexec"

Pull powerpc fixes from Benjamin Herrenschmidt:
 "I meant to sent that earlier but got swamped with other things, so
  here are some powerpc fixes for 3.6.  A few regression fixes and some
  bug fixes that I deemed should still make it.

  There's a FSL update from Kumar with a bunch of defconfig updates
  along with a few embedded fixes.

  I also reverted my g5_defconfig update that I merged earlier as it was
  completely busted, not too sure what happened there, I'll do a new one
  later."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  Revert "powerpc: Update g5_defconfig"
  powerpc/perf: Use pmc_overflow() to detect rolled back events
  powerpc: Fix VMX in interrupt check in POWER7 copy loops
  powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
  powerpc: Fix personality handling in ppc64_personality()
  powerpc/dma-iommu: Fix IOMMU window check
  powerpc: Remove unnecessary ifdefs
  powerpc/kgdb: Restore current_thread_info properly
  powerpc/kgdb: Bail out of KGDB when we've been triggered
  powerpc/kgdb: Do not set kgdb_single_step on ppc
  powerpc/mpic_msgr: Add missing includes
  powerpc: Fix null pointer deref in perf hardware breakpoints
  powerpc: Fixup whitespace in xmon
  powerpc: Fix xmon dl command for new printk implementation
  powerpc/fsl: fix "Failed to mount /dev: No such device" errors
  powerpc/fsl: update defconfigs
  booke/wdt: some ioctls do not return values properly
  powerpc/p4080ds: dts - add usb controller version info and port0
  powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
  powerpc/fsl-pci: Only scan PCI bus if configured as a host

Pull kvm fixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86 emulator: use stack size attribute to mask rsp in stack ops
  KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended
  ppc: e500_tlb memset clears nothing
  KVM: PPC: Add cache flush on page map
  KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code
  KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value