1. 09 Oct, 2019 7 commits
  2. 08 Oct, 2019 1 commit
    • Tiezhu Yang's avatar
      MIPS: generic: Use __initconst for const init data · a14bf1dc
      Tiezhu Yang authored
      Fix the following checkpatch errors:
      
      $ ./scripts/checkpatch.pl --no-tree -f arch/mips/generic/init.c
      ERROR: Use of const init definition must use __initconst
      #23: FILE: arch/mips/generic/init.c:23:
      +static __initdata const void *fdt;
      
      ERROR: Use of const init definition must use __initconst
      #24: FILE: arch/mips/generic/init.c:24:
      +static __initdata const struct mips_machine *mach;
      
      ERROR: Use of const init definition must use __initconst
      #25: FILE: arch/mips/generic/init.c:25:
      +static __initdata const void *mach_match_data;
      
      Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support")
      Signed-off-by: default avatarTiezhu Yang <yangtiezhu@loongson.cn>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      a14bf1dc
  3. 07 Oct, 2019 32 commits
    • Paul Burton's avatar
      MIPS: futex: Restore \n after sync instructions · fd7710cb
      Paul Burton authored
      Commit 3c1d3f09 ("MIPS: futex: Emit Loongson3 sync workarounds
      within asm") inadvertently removed the newlines following
      __WEAK_LLSC_MB, which causes build failures for configurations in which
      __WEAK_LLSC_MB expands to a sync instruction:
      
        {standard input}: Assembler messages:
        {standard input}:9346: Error: symbol `sync3' is already defined
        {standard input}:9380: Error: symbol `sync3' is already defined
        ...
      
      Fix this by restoring the newlines to separate the sync instruction from
      anything following it (such as the 3: label), preventing inadvertent
      concatenation.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Fixes: 3c1d3f09 ("MIPS: futex: Emit Loongson3 sync workarounds within asm")
      fd7710cb
    • Aurabindo Jayamohanan's avatar
      mips: check for dsp presence only once before save/restore · 9662dd75
      Aurabindo Jayamohanan authored
      {save,restore}_dsp() internally checks if the cpu has dsp support.
      Therefore, explicit check is not required before calling them in
      {save,restore}_processor_state()
      Signed-off-by: default avatarAurabindo Jayamohanan <mail@aurabindo.in>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: alexios.zavras@intel.com
      Cc: gregkh@linuxfoundation.org
      Cc: armijn@tjaldur.nl
      Cc: allison@lohutok.net
      Cc: tglx@linutronix.de
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      9662dd75
    • Thomas Bogendoerfer's avatar
      MIPS: PCI: use information from 1-wire PROM for IOC3 detection · 5dc76a96
      Thomas Bogendoerfer authored
      IOC3 chips in SGI system are conntected to a bridge ASIC, which has
      a 1-wire prom attached with part number information. This changeset
      uses this information to create PCI subsystem information, which
      the MFD driver uses for further platform device setup.
      Signed-off-by: default avatarThomas Bogendoerfer <tbogendoerfer@suse.de>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: Lee Jones <lee.jones@linaro.org>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Jiri Slaby <jslaby@suse.com>
      Cc: linux-doc@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: netdev@vger.kernel.org
      Cc: linux-rtc@vger.kernel.org
      Cc: linux-serial@vger.kernel.org
      5dc76a96
    • Thomas Bogendoerfer's avatar
      nvmem: core: add nvmem_device_find · 8c2a2b8c
      Thomas Bogendoerfer authored
      nvmem_device_find provides a way to search for nvmem devices with
      the help of a match function simlair to bus_find_device.
      Reviewed-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
      Acked-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
      Signed-off-by: default avatarThomas Bogendoerfer <tbogendoerfer@suse.de>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: Lee Jones <lee.jones@linaro.org>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Jiri Slaby <jslaby@suse.com>
      Cc: linux-doc@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: netdev@vger.kernel.org
      Cc: linux-rtc@vger.kernel.org
      Cc: linux-serial@vger.kernel.org
      8c2a2b8c
    • Alexandre GRIVEAUX's avatar
      MIPS: CI20: DTS: Add Leds · 24b0cb4f
      Alexandre GRIVEAUX authored
      Adding leds and related triggers.
      Signed-off-by: default avatarAlexandre GRIVEAUX <agriveaux@deutnet.info>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: robh+dt@kernel.org
      Cc: mark.rutland@arm.com
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      24b0cb4f
    • Alexandre GRIVEAUX's avatar
      MIPS: CI20: DTS: Add IW8103 Wifi + bluetooth · 948f2708
      Alexandre GRIVEAUX authored
      Add IW8103 Wifi + bluetooth module to device tree and related power domain.
      Signed-off-by: default avatarAlexandre GRIVEAUX <agriveaux@deutnet.info>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: robh+dt@kernel.org
      Cc: mark.rutland@arm.com
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      948f2708
    • Alexandre GRIVEAUX's avatar
      MIPS: CI20: DTS: Add I2C nodes · 73f2b940
      Alexandre GRIVEAUX authored
      Adding missing I2C nodes and some peripheral:
      - PMU
      - RTC
      Signed-off-by: default avatarAlexandre GRIVEAUX <agriveaux@deutnet.info>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: robh+dt@kernel.org
      Cc: mark.rutland@arm.com
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      73f2b940
    • Alexandre GRIVEAUX's avatar
      MIPS: JZ4780: DTS: Add I2C nodes · f56a040c
      Alexandre GRIVEAUX authored
      Add the devicetree nodes for the I2C core of the JZ4780 SoC, disabled
      by default.
      Signed-off-by: default avatarAlexandre GRIVEAUX <agriveaux@deutnet.info>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: robh+dt@kernel.org
      Cc: mark.rutland@arm.com
      Cc: ralf@linux-mips.org
      Cc: jhogan@kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: devicetree@vger.kernel.org
      f56a040c
    • Dmitry Korotin's avatar
      mips: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE · a2ecb233
      Dmitry Korotin authored
      FORTIFY_SOURCE detects various overflows at compile and run time.
      (6974f0c4 ("include/linux/string.h:
      add the option of fortified string.h functions)
      
      ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
      run with CONFIG_FORTIFY_SOURCE.
      
      Since mips can be built and run with that flag,
      select ARCH_HAS_FORTIFY_SOURCE as default.
      Signed-off-by: default avatarDmitry Korotin <dkorotin@wavecomp.com>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      a2ecb233
    • Huacai Chen's avatar
      MIPS: Loongson-3: Add CSR IPI support · ffe59ee3
      Huacai Chen authored
      CSR IPI and legacy MMIO use the same infrastructure, but CSR IPI is
      faster than legacy MMIO IPI. This patch enable CSR IPI if possible
      (except for MailBox, because CSR IPI is too complicated for MailBox).
      Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: linux-mips@vger.kernel.org
      Cc: Fuxin Zhang <zhangfx@lemote.com>
      Cc: Zhangjin Wu <wuzhangjin@gmail.com>
      Cc: Huacai Chen <chenhuacai@gmail.com>
      ffe59ee3
    • Huacai Chen's avatar
      MIPS: Loongson: Add Loongson-3A R4 basic support · 7507445b
      Huacai Chen authored
      All Loongson-3 CPU family:
      
      Code-name         Brand-name       PRId
      Loongson-3A R1    Loongson-3A1000  0x6305
      Loongson-3A R2    Loongson-3A2000  0x6308
      Loongson-3A R2.1  Loongson-3A2000  0x630c
      Loongson-3A R3    Loongson-3A3000  0x6309
      Loongson-3A R3.1  Loongson-3A3000  0x630d
      Loongson-3A R4    Loongson-3A4000  0xc000
      Loongson-3B R1    Loongson-3B1000  0x6306
      Loongson-3B R2    Loongson-3B1500  0x6307
      
      Features of R4 revision of Loongson-3A:
      
        - All R2/R3 features, including SFB, V-Cache, FTLB, RIXI, DSP, etc.
        - Support variable ASID bits.
        - Support MSA and VZ extensions.
        - Support CPUCFG (CPU config) and CSR (Control and Status Register)
            extensions.
        - 64 entries of VTLB (classic TLB), 2048 entries of FTLB (8-way
            set-associative).
      
      Now 64-bit Loongson processors has three types of PRID.IMP: 0x6300 is
      the classic one so we call it PRID_IMP_LOONGSON_64C (e.g., Loongson-2E/
      2F/3A1000/3B1000/3B1500/3A2000/3A3000), 0x6100 is for some processors
      which has reduced capabilities so we call it PRID_IMP_LOONGSON_64R
      (e.g., Loongson-2K), 0xc000 is supposed to cover all new processors in
      general (e.g., Loongson-3A4000+) so we call it PRID_IMP_LOONGSON_64G.
      Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
      Signed-off-by: default avatarJiaxun Yang <jiaxun.yang@flygoat.com>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: linux-mips@vger.kernel.org
      Cc: Fuxin Zhang <zhangfx@lemote.com>
      Cc: Zhangjin Wu <wuzhangjin@gmail.com>
      Cc: Huacai Chen <chenhuacai@gmail.com>
      7507445b
    • Huacai Chen's avatar
      MIPS: Loongson: Add CFUCFG&CSR support · 6a6f9b7d
      Huacai Chen authored
      Loongson-3A R4+ (Loongson-3A4000 and newer) has CPUCFG (CPU config) and
      CSR (Control and Status Register) extensions. This patch add read/write
      functionalities for them.
      Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
      Signed-off-by: default avatarJiaxun Yang <jiaxun.yang@flygoat.com>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: James Hogan <jhogan@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: linux-mips@vger.kernel.org
      Cc: Fuxin Zhang <zhangfx@lemote.com>
      Cc: Zhangjin Wu <wuzhangjin@gmail.com>
      Cc: Huacai Chen <chenhuacai@gmail.com>
      6a6f9b7d
    • Mike Rapoport's avatar
      mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM · 397dc00e
      Mike Rapoport authored
      The memory initialization of SGI-IP27 is already half-way to support
      SPARSEMEM. It only had free_bootmem_with_active_regions() left-overs
      interfering with sparse_memory_present_with_active_regions().
      
      Replace these calls with simpler memblocks_present() call in prom_meminit()
      and adjust arch/mips/Kconfig to enable SPARSEMEM and SPARSEMEM_EXTREME for
      SGI-IP27.
      Co-developed-by: default avatarThomas Bogendoerfer <tbogendoerfer@suse.de>
      Signed-off-by: default avatarThomas Bogendoerfer <tbogendoerfer@suse.de>
      Signed-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      397dc00e
    • Paul Burton's avatar
      MIPS: Check Loongson3 LL/SC errata workaround correctness · e4acfbc1
      Paul Burton authored
      When Loongson3 LL/SC errata workarounds are enabled (ie.
      CONFIG_CPU_LOONGSON3_WORKAROUNDS=y) run a tool to scan through the
      compiled kernel & ensure that the workaround is applied correctly. That
      is, ensure that:
      
        - Every LL or LLD instruction is preceded by a sync instruction.
      
        - Any branches from within an LL/SC loop to outside of that loop
          target a sync instruction.
      
      Reasoning for these conditions can be found by reading the comment above
      the definition of __SYNC_loongson3_war in arch/mips/include/asm/sync.h.
      
      This tool will help ensure that we don't inadvertently introduce code
      paths that miss the required workarounds.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      e4acfbc1
    • Paul Burton's avatar
      MIPS: genex: Don't reload address unnecessarily · 4dee90d7
      Paul Burton authored
      In ejtag_debug_handler() we must reload the address of
      ejtag_debug_buffer_spinlock if an sc fails, since the address in k0 will
      have been clobbered by the result of the sc instruction. In the case
      where we simply load a non-zero value (ie. there's contention for the
      lock) the address will not be clobbered & we can simply branch back to
      repeat the load from memory without reloading the address into k0.
      
      The primary motivation for this change is that it moves the target of
      the bnez instruction to an instruction within the LL/SC loop (the LL
      itself), which we know contains no other memory accesses & therefore
      isn't affected by Loongson3 LL/SC errata.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      4dee90d7
    • Paul Burton's avatar
      MIPS: genex: Add Loongson3 LL/SC workaround to ejtag_debug_handler · 12dbb04f
      Paul Burton authored
      In ejtag_debug_handler we use LL & SC instructions to acquire & release
      an open-coded spinlock. For Loongson3 systems affected by LL/SC errata
      this requires that we insert a sync instruction prior to the LL in order
      to ensure correct behavior of the LL/SC loop.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      12dbb04f
    • Paul Burton's avatar
      MIPS: barrier: Make __smp_mb__before_atomic() a no-op for Loongson3 · ae4cd0b1
      Paul Burton authored
      Loongson3 systems with CONFIG_CPU_LOONGSON3_WORKAROUNDS enabled already
      emit a full completion barrier as part of the inline assembly containing
      LL/SC loops for atomic operations. As such the barrier emitted by
      __smp_mb__before_atomic() is redundant, and we can remove it.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      ae4cd0b1
    • Paul Burton's avatar
      MIPS: barrier: Remove loongson_llsc_mb() · 7f56b123
      Paul Burton authored
      The loongson_llsc_mb() macro is no longer used - instead barriers are
      emitted as part of inline asm using the __SYNC() macro. Remove the
      now-defunct loongson_llsc_mb() macro.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      7f56b123
    • Paul Burton's avatar
      MIPS: syscall: Emit Loongson3 sync workarounds within asm · e84957e6
      Paul Burton authored
      Generate the sync instructions required to workaround Loongson3 LL/SC
      errata within inline asm blocks, which feels a little safer than doing
      it from C where strictly speaking the compiler would be well within its
      rights to insert a memory access between the separate asm statements we
      previously had, containing sync & ll instructions respectively.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      e84957e6
    • Paul Burton's avatar
      MIPS: futex: Emit Loongson3 sync workarounds within asm · 3c1d3f09
      Paul Burton authored
      Generate the sync instructions required to workaround Loongson3 LL/SC
      errata within inline asm blocks, which feels a little safer than doing
      it from C where strictly speaking the compiler would be well within its
      rights to insert a memory access between the separate asm statements we
      previously had, containing sync & ll instructions respectively.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      3c1d3f09
    • Paul Burton's avatar
      MIPS: cmpxchg: Omit redundant barriers for Loongson3 · a91f2a1d
      Paul Burton authored
      When building a kernel configured to support Loongson3 LL/SC workarounds
      (ie. CONFIG_CPU_LOONGSON3_WORKAROUNDS=y) the inline assembly in
      __xchg_asm() & __cmpxchg_asm() already emits completion barriers, and as
      such we don't need to emit extra barriers from the xchg() or cmpxchg()
      macros. Add compile-time constant checks causing us to omit the
      redundant memory barriers.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      a91f2a1d
    • Paul Burton's avatar
      MIPS: cmpxchg: Emit Loongson3 sync workarounds within asm · 6a57d2d1
      Paul Burton authored
      Generate the sync instructions required to workaround Loongson3 LL/SC
      errata within inline asm blocks, which feels a little safer than doing
      it from C where strictly speaking the compiler would be well within its
      rights to insert a memory access between the separate asm statements we
      previously had, containing sync & ll instructions respectively.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      6a57d2d1
    • Paul Burton's avatar
      MIPS: bitops: Use smp_mb__before_atomic in test_* ops · 90267377
      Paul Burton authored
      Use smp_mb__before_atomic() rather than smp_mb__before_llsc() in
      test_and_set_bit(), test_and_clear_bit() & test_and_change_bit(). The
      _atomic() versions make semantic sense in these cases, and will allow a
      later patch to omit redundant barriers for Loongson3 systems that
      already include a barrier within __test_bit_op().
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      90267377
    • Paul Burton's avatar
      MIPS: bitops: Emit Loongson3 sync workarounds within asm · 5bb29275
      Paul Burton authored
      Generate the sync instructions required to workaround Loongson3 LL/SC
      errata within inline asm blocks, which feels a little safer than doing
      it from C where strictly speaking the compiler would be well within its
      rights to insert a memory access between the separate asm statements we
      previously had, containing sync & ll instructions respectively.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      5bb29275
    • Paul Burton's avatar
      MIPS: bitops: Use BIT_WORD() & BITS_PER_LONG · c042be02
      Paul Burton authored
      Rather than using custom SZLONG_LOG & SZLONG_MASK macros to shift & mask
      a bit index to form word & bit offsets respectively, make use of the
      standard BIT_WORD() & BITS_PER_LONG macros for the same purpose.
      
      volatile is added to the definition of pointers to the long-sized word
      we'll operate on, in order to prevent the compiler complaining that we
      cast away the volatile qualifier of the addr argument. This should have
      no effect on generated code, which in the LL/SC case is inline asm
      anyway & in the non-LLSC case access is constrained by compiler barriers
      provided by raw_local_irq_{save,restore}().
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      c042be02
    • Paul Burton's avatar
      MIPS: bitops: Abstract LL/SC loops · cc99987c
      Paul Burton authored
      Introduce __bit_op() & __test_bit_op() macros which abstract away the
      implementation of LL/SC loops. This cuts down on a lot of duplicate
      boilerplate code, and also allows R10000_LLSC_WAR to be handled outside
      of the individual bitop functions.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      cc99987c
    • Paul Burton's avatar
      MIPS: bitops: Avoid redundant zero-comparison for non-LLSC · aad028ca
      Paul Burton authored
      The IRQ-disabling non-LLSC fallbacks for bitops on UP systems already
      return a zero or one, so there's no need to perform another comparison
      against zero. Move these comparisons into the LLSC paths to avoid the
      redundant work.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      aad028ca
    • Paul Burton's avatar
      MIPS: bitops: Use the BIT() macro · d6103510
      Paul Burton authored
      Use the BIT() macro in asm/bitops.h rather than open-coding its
      equivalent.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      d6103510
    • Paul Burton's avatar
      MIPS: bitops: Allow immediates in test_and_{set,clear,change}_bit · a2e66b86
      Paul Burton authored
      The logical operations or & xor used in the test_and_set_bit_lock(),
      test_and_clear_bit() & test_and_change_bit() functions currently force
      the value 1<<bit to be placed in a register. If the bit is compile-time
      constant & fits within the immediate field of an or/xor instruction (ie.
      16 bits) then we can make use of the ori/xori instruction variants &
      avoid the use of an extra register. Add the extra "i" constraints in
      order to allow use of these immediate encodings.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      a2e66b86
    • Paul Burton's avatar
      MIPS: bitops: Implement test_and_set_bit() in terms of _lock variant · 6bbe043b
      Paul Burton authored
      The only difference between test_and_set_bit() & test_and_set_bit_lock()
      is memory ordering barrier semantics - the former provides a full
      barrier whilst the latter only provides acquire semantics.
      
      We can therefore implement test_and_set_bit() in terms of
      test_and_set_bit_lock() with the addition of the extra memory barrier.
      Do this in order to avoid duplicating logic.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      6bbe043b
    • Paul Burton's avatar
      MIPS: bitops: ins start position is always an immediate · 27aab272
      Paul Burton authored
      The start position for an ins instruction is always encoded as an
      immediate, so allowing registers to be used by the inline asm makes no
      sense. It should never happen anyway since a bit index should always be
      small enough to be treated as an immediate, but remove the nonsensical
      "r" for sanity.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      27aab272
    • Paul Burton's avatar
      MIPS: bitops: Use MIPS_ISA_REV, not #ifdefs · 59361e99
      Paul Burton authored
      Rather than #ifdef on CONFIG_CPU_* to determine whether the ins
      instruction is supported we can simply check MIPS_ISA_REV to discover
      whether we're targeting MIPSr2 or higher. Do so in order to clean up the
      code.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Cc: linux-mips@vger.kernel.org
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
      Cc: linux-kernel@vger.kernel.org
      59361e99