Pull drm fixes from Dave Airlie:
 "One fix for a hotplug locking regressions, and one fix for an oops if
  you unplug the monitor at an inopportune moment on the udl device."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
  udl: handle EDID failure properly.

Pull m68knommu fix from Greg Ungerer:
 "This contains only a single compilation fix for ColdFire m68k targets
  that use local non-GPIOLIB support."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: define a local gpio_request_one() function

Pull watchdog fix from Wim Van Sebroeck:
 "It will fix compile errors for the at91rm9200_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Revert the AT91RM9200_WATCHDOG dependency

Pull one more btrfs fix from Chris Mason:
 "This has a recent fix from Josef for our tree log replay code.  It
  fixes problems where the inode counter for the number of bytes in the
  file wasn't getting updated properly during fsync replay.

  The commit did get rebased this morning, but it was only to clean up
  the subject line.  The code hasn't changed."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: make sure nbytes are right after log replay

Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "Namhyung Kim found and fixed a bug that can crash the kernel by simply
  doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid

  Luckily, this can only be done by root, but still is a nasty bug."

* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
  tracing: Fix possible NULL pointer dereferences

Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:

drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow

So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd3 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Revert commit 62a3ddef ("vfs: fix spinning prevention in prune_icache_sb").

This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.

Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Anatol Pomozov identified a race condition that hits module unloading
and re-loading.  To quote Anatol:

 "This is a race codition that exists between kset_find_obj() and
  kobject_put().  kset_find_obj() might return kobject that has refcount
  equal to 0 if this kobject is freeing by kobject_put() in other
  thread.

  Here is timeline for the crash in case if kset_find_obj() searches for
  an object tht nobody holds and other thread is doing kobject_put() on
  the same kobject:

    THREAD A (calls kset_find_obj())     THREAD B (calls kobject_put())
    splin_lock()
                                         atomic_dec_return(kobj->kref), counter gets zero here
                                         ... starts kobject cleanup ....
                                         spin_lock() // WAIT thread A in kobj_kset_leave()
    iterate over kset->list
    atomic_inc(kobj->kref) (counter becomes 1)
    spin_unlock()
                                         spin_lock() // taken
                                         // it does not know that thread A increased counter so it
                                         remove obj from list
                                         spin_unlock()
                                         vfree(module) // frees module object with containing kobj

    // kobj points to freed memory area!!
    kobject_put(kobj) // OOPS!!!!

  The race above happens because module.c tries to use kset_find_obj()
  when somebody unloads module.  The module.c code was introduced in
  commit 6494a93d"

Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.

See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().

[ Side note: the module race does indicate that module loading and
  unloading is not properly serialized wrt sysfs information using the
  module mutex.  That may require further thought, but this is the
  correct fix at the kobject layer regardless. ]
Reported-analyzed-and-tested-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file.  That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it.  So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent.  This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct.  With this
I'm no longer getting nbytes errors out of btrfsck.

Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This patch attempts to fix:

	https://bugzilla.kernel.org/show_bug.cgi?id=56461

The symptom is a crash and messages like this:

	chrome: Corrupted page table at address 34a03000
	*pdpt = 0000000000000000 *pde = 0000000000000000
	Bad pagetable: 000f [#1] PREEMPT SMP

Ingo guesses this got introduced by commit 611ae8e3 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.

On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).

The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy.  If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).

This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.

BTW, I disassembled and checked that:

	if (tlb->fullmm == 0)
and
	if (!tlb->fullmm && !tlb->need_flush_all)

generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Artem S Tashkinov <t.artem@mailcity.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are remaining target-pending items for v3.9-rc7 code.

  The tcm_vhost patches are more than I'd usually include in a -rc7
  pull, but are changes required for v3.9 to work correctly with the
  pending vhost-scsi-pci QEMU upstream series merge.  (Paolo CC'ed)

  Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
  managing vhost-scsi endpoints has gotten alot of review + testing over
  the past weeks, and MST has ACKed the full series.

  Also, there is a target patch to fix a long-standing bug within
  control CDB handling with Standby/Offline/Transition ALUA port access
  states, that had been incorrectly rejecting the control CDBs required
  for LUN scan to work during these port group states.  CC'ing to
  stable."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
  tcm_vhost: Send bad target to guest when cmd fails
  tcm_vhost: Add vhost_scsi_send_bad_target() helper
  tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
  tcm_vhost: Remove double check of response
  tcm_vhost: Initialize vq->last_used_idx when set endpoint
  tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
  tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access

Pull SCSI fixes from James Bottomley:
 "This is a set of ten bug fixes (and two consisting of copyright year
  update and version number change) pretty much all of which involve
  either a crash or a hang except the removal of the random sleep from
  the qla2xxx driver (which is a coding error so bad, we want it gone
  before anyone has a chance to copy it)."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
  [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
  [SCSI] ibmvscsi: Fix slave_configure deadlock
  [SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
  [SCSI] qla2xxx: Remove debug code that msleeps for random duration.
  [SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
  [SCSI] qla2xxx: Fix crash during firmware dump procedure.
  [SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
  [SCSI] ipr: dlpar failed when adding an adapter back
  [SCSI] ipr: fix addition of abort command to HRRQ free queue
  [SCSI] st: Take additional queue ref in st_probe
  [SCSI] libsas: use right function to alloc smp response
  [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter

Pull CIFS fix from Steve French:
 "Fixes a regression in cifs in which a password which begins with a
  comma is parsed incorrectly as a blank password"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Allow passwords which begin with a delimitor

As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.

Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops.  However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.

It can be easily reproduced with following command:

  $ cd /sys/kernel/debug/tracing
  $ echo 1234 | sudo tee -a set_ftrace_pid

In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().

Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull sound fixes from Takashi Iwai:
 "This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
  tegra, and soc-compress) and an endian fix for NI USB-audio devices,
  update for Mark's e-mail address.

  No scary changes, AFAIS."

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: Update e-mail address
  ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
  ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
  ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
  ASoC: tegra: Don't claim to support PCM pause and resume
  ASoC: Samsung: set drvdata before adding secondary device
  ASoC: Samsung: return error if drvdata is not set
  ASoC: compress: Cancel delayed power down if needed
  ASoC: core: Fix to check return value of snd_soc_update_bits_locked()

Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

MAINTAINERS: Update e-mail address

Update the e-mail address I use for subsystems.

Update the e-mail address I use for subsystems.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge tag 'asoc-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.9

A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones.  Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.

Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.

This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Don't oops seems proper.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull slave-dmaengine fixes from Vinod Koul:
 "The first one fixes issue in pl330 to check for DT compatible and
  the second one fixes omap-dma to start without delay"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: omap-dma: Start DMA without delay for cyclic channels
  DMA: PL330: Add check if device tree compatible

Pull power management fixes from Rafael Wysocki:

 - System reboot/halt fix related to CPU offline ordering from Huacai
   Chen.

 - intel_pstate driver fix for a delay time computation error
   occasionally crashing systems using it from Dirk Brandewie.

* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
  cpufreq / intel_pstate: Set timer timeout correctly

Pull regmap revert from Mark Brown:
 "regmap: Back out work buffer fix

  This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
  _regmap_raw_write()) since it turns out that it can cause issues when
  taken in isolation from the other changes in -next that lead to its
  discovery.  On the basis that nobody noticed the problems for quite
  some time without that subsequent work let's drop it from v3.9."

* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Back out work buffer fix

Pull GPIO fix from Linus Walleij:
 "Oneliner fix for the PCA 953x driver."

* tag 'gpio-fixes-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix irq_domain_add_simple usage

Pull ARM SoC bug fixes from Arnd Bergmann:
 "A little later during the week than the last few pull requests, since
  there was very little that came in before 3.9-rc6.  At least things
  have calmed down again here.

  Some important bug fixes that came in over the last 10 days, mostly
  mvebu and imx:

   - Multiple regressions on i.mx following the conversion of the clock
     code, hopefully the last we are seeing of those.
   - a regression in the mvebu irq handling code
   - An incorrect register offset in the rewritten s3c24xx irq code.
   - Two bugs in setting up the iomega_ix2_200 machine
   - Turning on an extra bus clock on imx
   - A MAINTAINERS file entry for Roland Stigge"

* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
  ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
  ARM i.MX6: Fix ldb_di clock selection
  ARM: imx: provide twd clock lookup from device tree
  ARM: imx35 Bugfix admux clock
  ARM: clk-imx35: Bugfix iomux clock
  ARM: mxs: Slow down the I2C clock speed
  MAINTAINERS: Add maintainer for LPC32xx
  ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED

The dereference to 'put_index' should be moved below the NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().

Fixes regression introduced by commit
0e8f2fda (gpio: pca953x: use simple
irqdomain)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

From Jason Cooper <jason@lakedaemon.net>:

mvebu fixes for v3.9 round 3

 - Kirkwood
    - a couple of small fixes for the Iomega ix2-200 board (ether and led)
 - mvebu
    - allow GPIO button to work on Mirabox when running SMP

* tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.

This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.

Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Send bad target to guest in case:
1) we can not allocate the cmd
2) fail to submit the cmd
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Share the send bad target code with other use cases.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work,
we will leak the tv_vmd. Free tv_vmd on fail path.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We did the length of response check twice.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>