- 24 Nov, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allow callchain order (caller, callee) to the libdw and libunwind based DWARF unwinders (Jiri Olsa) - Add missing parent_val initialization in the callchain code, fixing a SEGFAULT when using callchains with 'perf top' (Jiri Olsa) - Add initial 'perf config' command, for now just with a --list command to the contents of the configuration file in use and a basic man page describing its format, commands for doing edits and detailed documentation are being reviewed and proof-read. (Taeung Song) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 23 Nov, 2015 20 commits
-
-
Jiri Olsa authored
Adding missing parent_val callchain_node initialization. It's causing segfault in perf top: $ sudo perf top -g perf: Segmentation fault -------- backtrace -------- free_callchain_node(+0x29) in perf [0x4a4b3e] free_callchain(+0x29) in perf [0x4a5a83] hist_entry__delete(+0x126) in perf [0x4c6649] hists__delete_entry(+0x6e) in perf [0x4c66dc] hists__decay_entries(+0x7d) in perf [0x4c6776] perf_top__sort_new_samples(+0x7c) in perf [0x436a78] hist_browser__run(+0xf2) in perf [0x507760] perf_evsel__hists_browse(+0x1da) in perf [0x507c8d] perf_evlist__tui_browse_hists(+0x3e) in perf [0x5088cf] display_thread_tui(+0x7f) in perf [0x437953] start_thread(+0xc5) in libpthread-2.21.so [0x7f7068fbb555] __clone(+0x6d) in libc-2.21.so [0x7f7066fc3b9d] [0x0] Reported-and-Tested-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 4b3a3212 ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20151121102355.GA17313@krava.localSigned-off-by:
-
Taeung Song authored
Add perf-config document to describe the perf configuration and a 'list’ subcommand. Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/63AD9B57-7B8C-46F8-8F18-0FFEB9A6A1BC@gmail.comSigned-off-by:
-
Taeung Song authored
The perf configuration file contains many variables to change various aspects of each of its tools, including output, disk usage, etc. But looking at the state of configuration is difficult and there's no documentation about config variables except for the variables in perfconfig.example exist. So this patch adds a 'perf-config' command with a '--list' option. perf config [options] display current perf config variables. # perf config -l | --list Signed-off-by: -
Jiri Olsa authored
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libdw DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 21.12% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start $ perf report --stdio --no-children -g caller 21.12% ls libc-2.21.so [.] __strcoll_l | ---_start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp __strcoll_l Reported-and-Tested-by:Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jan Kratochvil <jkratoch@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20151119130119.GA26617@krava.brq.redhat.comSigned-off-by:
-
Jiri Olsa authored
Adding callchain order setup for DWARF unwinder test. The test now runs unwinder for both callee and caller orders. Signed-off-by:
-
Jiri Olsa authored
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libunwind DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 39.26% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start 0 $ perf report -g caller --no-children --stdio ... 39.26% ls libc-2.21.so [.] __strcoll_l | ---0 _start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp __strcoll_l Based-on-patch-by: -
Jiri Olsa authored
Moving initial entry call into get_entries function so all entries processing is on one place. It will be useful for next change that adds ordering logic. Signed-off-by:
-
Andi Kleen authored
The earlier constraint fix for Broadwell CYCLE_ACTIVITY.* forced umask 8 to counter 2. For this it used UEVENT, to match the complete umask. The event list for Broadwell has an additional STALLS_L1D_PENDIND event that uses umask 8, but also sets other bits in the umask. The earlier strict umask match didn't handle this case. Add a new UBIT_EVENT constraint macro that only matches the specified bits in the umask. Then use that macro to handle CYCLE_ACTIVITY.* on Broadwell. The documented event also uses cmask, but there's no need to let the event scheduler know about the cmask, as the scheduling restriction is only tied to the umask. Reported-by:
Grant Ayers <ayers@cs.stanford.edu> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1447719667-9998-1-git-send-email-andi@firstfloor.org [ Filled in the missing email address of Grant Ayers - hopefully I got the right one. ] Signed-off-by:
-
Takao Indoh authored
This patch stops Intel PT logging and saves its registers in memory before kdump is started. This feature is needed to prevent Intel PT from overwriting its log buffer after panic, and saved registers are needed to find the last position where Intel PT wrote data. After the crash dump is captured by kdump, users can retrieve the log buffer from the vmcore and use it to investigate bad kernel behavior. Signed-off-by:
Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by:
-
Takao Indoh authored
This patch add a function for external components to stop Intel PT. Basically this function is used when kernel panic occurs. When it is called, the intel_pt driver disables Intel PT and saves its registers using pt_event_stop(), which is also used by pmu.stop handler. This function stops Intel PT on the CPU where it is working, therefore users of it need to call it for each CPU to stop all logging. Signed-off-by:
-
Andi Kleen authored
With LBRv5 reading the extra LBR flags like mispredict, TSX, cycles is not free anymore, as it has moved to a separate MSR. For callstack mode we don't need any of this information; so we can avoid the unnecessary MSR read. Add flags to the perf interface where perf record can request not collecting this information. Add branch_sample_type flags for CYCLES and FLAGS. It's a bit unusual for branch_sample_types to be negative (disable), not positive (enable), but since the legacy ABI reported the flags we need some form of explicit disabling to avoid breaking the ABI. After we have the flags the x86 perf code can keep track if any users need the flags. If noone needs it the information is not collected. This cuts down the cost of LBR callstack on Skylake significantly. Profiling a kernel build with LBR call stack the average run time of the PMI handler drops by 43%. Signed-off-by:
-
Andi Kleen authored
Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by:
-
Andi Kleen authored
Add a inlined __ variant of copy_from_user_nmi. The inlined variant allows the user to: - batch the access_ok() check for multiple accesses - avoid having a pagefault_disable/enable() on every access if the caller already ensures disabled page faults due to its context. - get all the optimizations in copy_*_user() for small constant sized transfers It is just a define to __copy_from_user_inatomic(). Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allows BPF scriptlets specify arguments to be fetched using DWARF info, using a prologue generated at compile/build time (He Kuang, Wang Nan) - Allow attaching BPF scriptlets to module symbols (Wang Nan) - Allow attaching BPF scriptlets to userspace code using uprobe (Wang Nan) - BPF programs now can specify 'perf probe' tunables via its section name, separating key=val values using semicolons (Wang Nan) Testing some of these new BPF features: Use case: get callchains when receiving SSL packets, filter then in the kernel, at arbitrary place. # cat ssl.bpf.c #define SEC(NAME) __attribute__((section(NAME), used)) struct pt_regs; SEC("func=__inet_lookup_established hnum") int func(struct pt_regs *ctx, int err, unsigned short port) { return err == 0 && port == 443; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; # # perf record -a -g -e ssl.bpf.c ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ] # perf script | head -30 swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb 8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux) 896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux) 8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux) 855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) 8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux) 856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux) 2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux) 2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux) 96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux) 969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux) 2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux) 95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux) 1163ffa start_kernel ([kernel.vmlinux].init.text) 11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text) 1163623 x86_64_start_kernel ([kernel.vmlinux].init.text) qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb 8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux) 896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux) 8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux) 855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) 856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux) 8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux) 430a br_handle_frame_finish ([bridge]) 48bc br_handle_frame ([bridge]) 855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) # Use 'perf probe' various options to list functions, see what variables can be collected at any given point, experiment first collecting without a filter, then filter, use it together with 'perf trace', 'perf top', with or without callchains, if it explodes, please tell us! - Introduce a new callchain mode: "folded", that will list per line representations of all callchains for a give histogram entry, facilitating 'perf report' output processing by other tools, such as Brendan Gregg's flamegraph tools (Namhyung Kim) E.g: # perf report | grep -v ^# | head 18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry | ---cpu_startup_entry | |--12.07%--start_secondary | --6.30%--rest_init start_kernel x86_64_start_reservations x86_64_start_kernel # Becomes, in "folded" mode: # perf report -g folded | grep -v ^# | head -5 18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry 12.07% cpu_startup_entry;start_secondary 6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle 11.23% call_cpuidle;cpu_startup_entry;start_secondary 5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter 11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary 5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state # The user can also select one of "count", "period" or "percent" as the first column. Infrastructure changes: - Fix multiple leaks found with Valgrind and a refcount debugger (Masami Hiramatsu) - Add further 'perf test' entries for BPF and LLVM (Wang Nan) - Improve 'perf test' to suport subtests, so that the series of tests performed in the LLVM and BPF main tests appear in the default 'perf test' output (Wang Nan) - Move memdup() from tools/perf to tools/lib/string.c (Arnaldo Carvalho de Melo) - Adopt strtobool() from the kernel into tools/lib/ (Wang Nan) - Fix selftests_install tools/ Makefile rule (Kevin Hilman) Signed-off-by:
-
Peter Zijlstra authored
There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by:
-
Andi Kleen authored
This fixes a bug I added in the following commit: 90405aa0 ("perf/x86/intel/lbr: Limit LBR accesses to TOS in callstack mode") The bug could lead to lost LBR call stacks. When restoring the LBR state we need to use the TOS of the previous context, not the current context. To do that we need to save/restore the TOS. Signed-off-by:
-
Peter Zijlstra authored
While still valid, I'm trying to phase out this email address. Signed-off-by:
-
Stephane Eranian authored
This patch reinforces the lockdep checks performed by perf_cgroup_from_tsk() by passing the perf_event_context whenever possible. It is okay to not hold the RCU read lock when we know we hold the ctx->lock. This patch makes sure this property holds. In some functions, such as perf_cgroup_sched_in(), we do not pass the context because we are sure we are holding the RCU read lock. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
The RCU checker detected RCU violation in the cgroup switching routines perf_cgroup_sched_in() and perf_cgroup_sched_out(). We were dereferencing cgroup from task without holding the RCU lock. Fix this by holding the RCU read lock. We move the locking from perf_cgroup_switch() to avoid double locking. Signed-off-by:
-
Linus Torvalds authored
-
- 22 Nov, 2015 19 commits
-
-
Linus Torvalds authored
Merge slub bulk allocator updates from Andrew Morton: "This missed the merge window because I was waiting for some repairs to come in. Nothing actually uses the bulk allocator yet and the changes to other code paths are pretty small. And the net guys are waiting for this so they can start merging the client code" More comments from Jesper Dangaard Brouer: "The kmem_cache_alloc_bulk() call, in mm/slub.c, were included in previous kernel. The present version contains a bug. Vladimir Davydov noticed it contained a bug, when kernel is compiled with CONFIG_MEMCG_KMEM (see commit 03ec0ed5: "slub: fix kmem cgroup bug in kmem_cache_alloc_bulk"). Plus the mem cgroup counterpart in kmem_cache_free_bulk() were missing (see commit 03374518 "slub: add missing kmem cgroup support to kmem_cache_free_bulk"). I don't consider the fix stable-material because there are no in-tree users of the API. But with known bugs (for memcg) I cannot start using the API in the net-tree" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: slab/slub: adjust kmem_cache_alloc_bulk API slub: add missing kmem cgroup support to kmem_cache_free_bulk slub: fix kmem cgroup bug in kmem_cache_alloc_bulk slub: optimize bulk slowpath free by detached freelist slub: support for bulk free with SLUB freelists
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a few small tty/serial driver fixes for 4.4-rc2 that resolve some reported problems. All have been in linux-next, full details are in the shortlog below" * tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: export fsl8250_handle_irq serial: 8250_mid: Add missing dependency tty: audit: Fix audit source serial: etraxfs-uart: Fix crash serial: fsl_lpuart: Fix earlycon support bcm63xx_uart: Use the device name when registering an interrupt tty: Fix direct use of tty buffer work tty: Fix tty_send_xchar() lock order inversion
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Greg KH: "Here are some staging and iio driver fixes for 4.4-rc2. All of these are in response to issues that have been reported and have been in linux-next for a while" * tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions" iio: adc: xilinx: Fix VREFN scale iio: si7020: Swap data byte order iio: adc: vf610_adc: Fix division by zero error iio:ad7793: Fix ad7785 product ID iio: ad5064: Fix ad5629/ad5669 shift iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN vf610_adc: Fix internal temperature calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB fixes and new device ids for 4.4-rc2. All have been in linux-next and the details are in the shortlog" * tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) usblp: do not set TASK_INTERRUPTIBLE before lock USB: MAINTAINERS: cxacru usb: kconfig: fix warning of select USB_OTG USB: option: add XS Stick W100-2 from 4G Systems xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devices usb: xhci: fix checking ep busy for CFC xhci: Workaround to get Intel xHCI reset working more reliably usb: chipidea: imx: fix a possible NULL dereference usb: chipidea: usbmisc_imx: fix a possible NULL dereference usb: chipidea: otg: gadget module load and unload support usb: chipidea: debug: disable usb irq while role switch ARM: dts: imx27.dtsi: change the clock information for usb usb: chipidea: imx: refine clock operations to adapt for all platforms usb: gadget: atmel_usba_udc: Expose correct device speed usb: musb: enable usb_dma parameter usb: phy: phy-mxs-usb: fix a possible NULL dereference usb: dwc3: gadget: let us set lower max_speed usb: musb: fix tx fifo flush handling usb: gadget: f_loopback: fix the warning during the enumeration usb: dwc2: host: Fix remote wakeup when not in DWC2_L2 ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - Fix a flood of annoying build warnings - A number of fixes for Atheros 79xx platforms * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ath79: Add a machine entry for booting OF machines MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsi MIPS: ath79: Fix the DDR control initialization on ar71xx and ar934x MIPS: Fix flood of warnings about comparsion being always true.
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc update from Helge Deller: "This patchset adds Huge Page and HUGETLBFS support for parisc" Honestly, the hugepage support should have gone through in the merge window, and is not really an rc-time fix. But it only touches arch/parisc, and I cannot find it in myself to care. If one of the three parisc users notices a breakage, I will point at Helge and make rude farting noises. * 'parisc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Map kernel text and data on huge pages parisc: Add Huge Page and HUGETLBFS support parisc: Use long branch to do_syscall_trace_exit parisc: Increase initial kernel mapping to 32MB on 64bit kernel parisc: Initialize the fault vector earlier in the boot process. parisc: Add defines for Huge page support parisc: Drop unused MADV_xxxK_PAGES flags from asm/mman.h parisc: Drop definition of start_thread_som for HP-UX SOM binaries parisc: Fix wrong comment regarding first pmd entry flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tool fixes from Thomas Gleixner: "A couple of fixes for perf tools: - Build system updates - Plug a memory leak in an error path of perf probe - Tear down probes correctly when adding fails - Fixes to the perf symbol handling - Fix ordering of event processing in buildid-list - Fix per DSO filtering in the histogram browser" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Clear probe_trace_event when add_probe_trace_event() fails perf probe: Fix memory leaking on failure by clearing all probe_trace_events perf inject: Also re-pipe lost_samples event perf buildid-list: Requires ordered events perf symbols: Fix dso lookup by long name and missing buildids perf symbols: Allow forcing reading of non-root owned files by root perf hists browser: The dso can be obtained from popup_action->ms.map->dso perf hists browser: Fix 'd' hotkey action to filter by DSO perf symbols: Rebuild rbtree when adjusting symbols for kcore tools: Add a "make all" rule tools: Actually install tmon in the install rule
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This update contains: - MPX updates for handling 32bit processes - A fix for a long standing bug in 32bit signal frame handling related to FPU/XSAVE state - Handle get_xsave_addr() correctly in KVM - Fix SMAP check under paravirtualization - Add a comment to the static function trace entry to avoid further confusion about the difference to dynamic tracing" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix SMAP check in PVOPS environments x86/ftrace: Add comment on static function tracing x86/fpu: Fix get_xsave_addr() behavior under virtualization x86/fpu: Fix 32-bit signal frame handling x86/mpx: Fix 32-bit address space calculation x86/mpx: Do proper get_user() when running 32-bit binaries on 64-bit kernels -
Jesper Dangaard Brouer authored
Adjust kmem_cache_alloc_bulk API before we have any real users. Adjust API to return type 'int' instead of previously type 'bool'. This is done to allow future extension of the bulk alloc API. A future extension could be to allow SLUB to stop at a page boundary, when specified by a flag, and then return the number of objects. The advantage of this approach, would make it easier to make bulk alloc run without local IRQs disabled. With an approach of cmpxchg "stealing" the entire c->freelist or page->freelist. To avoid overshooting we would stop processing at a slab-page boundary. Else we always end up returning some objects at the cost of another cmpxchg. To keep compatible with future users of this API linking against an older kernel when using the new flag, we need to return the number of allocated objects with this API change. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Dangaard Brouer authored
Initial implementation missed support for kmem cgroup support in kmem_cache_free_bulk() call, add this. If CONFIG_MEMCG_KMEM is not enabled, the compiler should be smart enough to not add any asm code. Incoming bulk free objects can belong to different kmem cgroups, and object free call can happen at a later point outside memcg context. Thus, we need to keep the orig kmem_cache, to correctly verify if a memcg object match against its "root_cache" (s->memcg_params.root_cache). Signed-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
The call slab_pre_alloc_hook() interacts with kmemgc and is not allowed to be called several times inside the bulk alloc for loop, due to the call to memcg_kmem_get_cache(). This would result in hitting the VM_BUG_ON in __memcg_kmem_get_cache. As suggested by Vladimir Davydov, change slab_post_alloc_hook() to be able to handle an array of objects. A subtle detail is, loop iterator "i" in slab_post_alloc_hook() must have same type (size_t) as size argument. This helps the compiler to easier realize that it can remove the loop, when all debug statements inside loop evaluates to nothing. Note, this is only an issue because the kernel is compiled with GCC option: -fno-strict-overflow In slab_alloc_node() the compiler inlines and optimizes the invocation of slab_post_alloc_hook(s, flags, 1, &object) by removing the loop and access object directly. Signed-off-by:
-
Jesper Dangaard Brouer authored
This change focus on improving the speed of object freeing in the "slowpath" of kmem_cache_free_bulk. The calls slab_free (fastpath) and __slab_free (slowpath) have been extended with support for bulk free, which amortize the overhead of the (locked) cmpxchg_double. To use the new bulking feature, we build what I call a detached freelist. The detached freelist takes advantage of three properties: 1) the free function call owns the object that is about to be freed, thus writing into this memory is synchronization-free. 2) many freelist's can co-exist side-by-side in the same slab-page each with a separate head pointer. 3) it is the visibility of the head pointer that needs synchronization. Given these properties, the brilliant part is that the detached freelist can be constructed without any need for synchronization. The freelist is constructed directly in the page objects, without any synchronization needed. The detached freelist is allocated on the stack of the function call kmem_cache_free_bulk. Thus, the freelist head pointer is not visible to other CPUs. All objects in a SLUB freelist must belong to the same slab-page. Thus, constructing the detached freelist is about matching objects that belong to the same slab-page. The bulk free array is scanned is a progressive manor with a limited look-ahead facility. Kmem debug support is handled in call of slab_free(). Notice kmem_cache_free_bulk no longer need to disable IRQs. This only slowed down single free bulk with approx 3 cycles. Performance data: Benchmarked[1] obj size 256 bytes on CPU i7-4790K @ 4.00GHz SLUB fastpath single object quick reuse: 47 cycles(tsc) 11.931 ns To get stable and comparable numbers, the kernel have been booted with "slab_merge" (this also improve performance for larger bulk sizes). Performance data, compared against fallback bulking: bulk - fallback bulk - improvement with this patch 1 - 62 cycles(tsc) 15.662 ns - 49 cycles(tsc) 12.407 ns- improved 21.0% 2 - 55 cycles(tsc) 13.935 ns - 30 cycles(tsc) 7.506 ns - improved 45.5% 3 - 53 cycles(tsc) 13.341 ns - 23 cycles(tsc) 5.865 ns - improved 56.6% 4 - 52 cycles(tsc) 13.081 ns - 20 cycles(tsc) 5.048 ns - improved 61.5% 8 - 50 cycles(tsc) 12.627 ns - 18 cycles(tsc) 4.659 ns - improved 64.0% 16 - 49 cycles(tsc) 12.412 ns - 17 cycles(tsc) 4.495 ns - improved 65.3% 30 - 49 cycles(tsc) 12.484 ns - 18 cycles(tsc) 4.533 ns - improved 63.3% 32 - 50 cycles(tsc) 12.627 ns - 18 cycles(tsc) 4.707 ns - improved 64.0% 34 - 96 cycles(tsc) 24.243 ns - 23 cycles(tsc) 5.976 ns - improved 76.0% 48 - 83 cycles(tsc) 20.818 ns - 21 cycles(tsc) 5.329 ns - improved 74.7% 64 - 74 cycles(tsc) 18.700 ns - 20 cycles(tsc) 5.127 ns - improved 73.0% 128 - 90 cycles(tsc) 22.734 ns - 27 cycles(tsc) 6.833 ns - improved 70.0% 158 - 99 cycles(tsc) 24.776 ns - 30 cycles(tsc) 7.583 ns - improved 69.7% 250 - 104 cycles(tsc) 26.089 ns - 37 cycles(tsc) 9.280 ns - improved 64.4% Performance data, compared current in-kernel bulking: bulk - curr in-kernel - improvement with this patch 1 - 46 cycles(tsc) - 49 cycles(tsc) - improved (cycles:-3) -6.5% 2 - 27 cycles(tsc) - 30 cycles(tsc) - improved (cycles:-3) -11.1% 3 - 21 cycles(tsc) - 23 cycles(tsc) - improved (cycles:-2) -9.5% 4 - 18 cycles(tsc) - 20 cycles(tsc) - improved (cycles:-2) -11.1% 8 - 17 cycles(tsc) - 18 cycles(tsc) - improved (cycles:-1) -5.9% 16 - 18 cycles(tsc) - 17 cycles(tsc) - improved (cycles: 1) 5.6% 30 - 18 cycles(tsc) - 18 cycles(tsc) - improved (cycles: 0) 0.0% 32 - 18 cycles(tsc) - 18 cycles(tsc) - improved (cycles: 0) 0.0% 34 - 78 cycles(tsc) - 23 cycles(tsc) - improved (cycles:55) 70.5% 48 - 60 cycles(tsc) - 21 cycles(tsc) - improved (cycles:39) 65.0% 64 - 49 cycles(tsc) - 20 cycles(tsc) - improved (cycles:29) 59.2% 128 - 69 cycles(tsc) - 27 cycles(tsc) - improved (cycles:42) 60.9% 158 - 79 cycles(tsc) - 30 cycles(tsc) - improved (cycles:49) 62.0% 250 - 86 cycles(tsc) - 37 cycles(tsc) - improved (cycles:49) 57.0% Performance with normal SLUB merging is significantly slower for larger bulking. This is believed to (primarily) be an effect of not having to share the per-CPU data-structures, as tuning per-CPU size can achieve similar performance. bulk - slab_nomerge - normal SLUB merge 1 - 49 cycles(tsc) - 49 cycles(tsc) - merge slower with cycles:0 2 - 30 cycles(tsc) - 30 cycles(tsc) - merge slower with cycles:0 3 - 23 cycles(tsc) - 23 cycles(tsc) - merge slower with cycles:0 4 - 20 cycles(tsc) - 20 cycles(tsc) - merge slower with cycles:0 8 - 18 cycles(tsc) - 18 cycles(tsc) - merge slower with cycles:0 16 - 17 cycles(tsc) - 17 cycles(tsc) - merge slower with cycles:0 30 - 18 cycles(tsc) - 23 cycles(tsc) - merge slower with cycles:5 32 - 18 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:4 34 - 23 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:-1 48 - 21 cycles(tsc) - 22 cycles(tsc) - merge slower with cycles:1 64 - 20 cycles(tsc) - 48 cycles(tsc) - merge slower with cycles:28 128 - 27 cycles(tsc) - 57 cycles(tsc) - merge slower with cycles:30 158 - 30 cycles(tsc) - 59 cycles(tsc) - merge slower with cycles:29 250 - 37 cycles(tsc) - 56 cycles(tsc) - merge slower with cycles:19 Joint work with Alexander Duyck. [1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/mm/slab_bulk_test01.c [akpm@linux-foundation.org: BUG_ON -> WARN_ON;return] Signed-off-by:Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by:
-
Jesper Dangaard Brouer authored
Make it possible to free a freelist with several objects by adjusting API of slab_free() and __slab_free() to have head, tail and an objects counter (cnt). Tail being NULL indicate single object free of head object. This allow compiler inline constant propagation in slab_free() and slab_free_freelist_hook() to avoid adding any overhead in case of single object free. This allows a freelist with several objects (all within the same slab-page) to be free'ed using a single locked cmpxchg_double in __slab_free() and with an unlocked cmpxchg_double in slab_free(). Object debugging on the free path is also extended to handle these freelists. When CONFIG_SLUB_DEBUG is enabled it will also detect if objects don't belong to the same slab-page. These changes are needed for the next patch to bulk free the detached freelists it introduces and constructs. Micro benchmarking showed no performance reduction due to this change, when debugging is turned off (compiled with CONFIG_SLUB_DEBUG). Signed-off-by:
-
Helge Deller authored
Adjust the linker script and map_pages() to map kernel text and data on physical 1MB huge/large pages. Signed-off-by:Helge Deller <deller@gmx.de>
-
Helge Deller authored
This patch adds huge page support to allow userspace to allocate huge pages and to use hugetlbfs filesystem on 32- and 64-bit Linux kernels. A later patch will add kernel support to map kernel text and data on huge pages. The only requirement is, that the kernel needs to be compiled for a PA8X00 CPU (PA2.0 architecture). Older PA1.X CPUs do not support variable page sizes. 64bit Kernels are compiled for PA2.0 by default. Technically on parisc multiple physical huge pages may be needed to emulate standard 2MB huge pages. Signed-off-by: -
Helge Deller authored
Use the 22bit instead of the 17bit branch instruction on a 64bit kernel to reach the do_syscall_trace_exit function from the gateway page. A huge page enabled kernel may need the additional branch distance bits. Signed-off-by: -
Helge Deller authored
For the 64bit kernel the initially 16 MB kernel memory might become too small if you build a kernel with many modules built-in and with kernel text and data areas mapped on huge pages. This patch increases the initial mapping to 32MB for 64bit kernels and keeps 16MB for 32bit kernels. Signed-off-by: -
Helge Deller authored
A fault vector on parisc needs to be 2K aligned. Furthermore the checksum of the fault vector needs to sum up to 0 which is being calculated and written at runtime. Up to now we aligned both PA20 and PA11 fault vectors on the same 4K page in order to easily write the checksum after having mapped the kernel read-only (by mapping this page only as read-write). But when we want to map the kernel text and data on huge pages this makes things harder. So, simplify it by aligning both fault vectors on 2K boundries and write the checksum before we map the page read-only. Signed-off-by: -
Helge Deller authored
Huge pages on parisc will have the same size as one pmd table, which is on a 64bit kernel 2MB on a kernel with 4K kernel page sizes, and on a 32bit kernel 4MB when used with 4K kernel pages. Since parisc does not physically supports 2MB huge page sizes, emulate it with two consecutive 1MB page sizes instead. Keeping the same huge page size as one pmd will allow us to add transparent huge page support later on. Bit 21 in the pte flags was unused and will now be used to mark a page as huge page (_PAGE_HPAGE_BIT). Signed-off-by:
-
