RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support.
It is a successor chip of RTL8168DP.

For RTL8168EP, the read/write ocp register is via eri channel type 2, so I
move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx()
for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write.

The way of checking dash enable is different with RTL8168DP. I use
r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP,
to check if dash is enabled.

The driver_start() and driver_stop() of RTL8168EP is also different with
RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and
rtl8168ep_driver_xxx for RTL8168EP.

Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not
add firmware code for it.
so I did not add firmware code for it.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use current logging functions and add module name prefix.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

static values are automatically initialized to 0
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no reason to emit a log message for these.

Based upon a suggestion from Hannes Frederic Sowa.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>

One aim of commit 50100a5e ("tipc:
use pseudo message to wake up sockets after link congestion") was
to handle link congestion abatement in a uniform way for both unicast
and multicast transmit. However, the latter doesn't work correctly,
and has been broken since the referenced commit was applied.

If a user now sends a burst of multicast messages that is big
enough to cause broadcast link congestion, it will be put to sleep,
and not be waked up when the congestion abates as it should be.

This has two reasons. First, the flag that is used, TIPC_WAKEUP_USERS,
is set correctly, but in the wrong field. Instead of setting it in the
'action_flags' field of the arrival node struct, it is by mistake set
in the dummy node struct that is owned by the broadcast link, where it
will never tested for. Second, we cannot use the same flag for waking
up unicast and multicast users, since the function tipc_node_unlock()
needs to pick the wakeup pseudo messages to deliver from different
queues. It must hence be able to distinguish between the two cases.

This commit solves this problem by adding a new flag
TIPC_WAKEUP_BCAST_USERS, and a new function tipc_bclink_wakeup_user().
The latter is to be called by tipc_node_unlock() when the named flag,
now set in the correct field, is encountered.

v2: using explicit 'unsigned int' declaration instead of 'uint', as
per comment from David Miller.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Testing xmit_more support with netperf and connected UDP sockets,
I found strange dst refcount false sharing.

Current handling of IFF_XMIT_DST_RELEASE is not optimal.

Dropping dst in validate_xmit_skb() is certainly too late in case
packet was queued by cpu X but dequeued by cpu Y

The logical point to take care of drop/force is in __dev_queue_xmit()
before even taking qdisc lock.

As Julian Anastasov pointed out, need for skb_dst() might come from some
packet schedulers or classifiers.

This patch adds new helper to cleanly express needs of various drivers
or qdiscs/classifiers.

Drivers that need skb_dst() in their ndo_start_xmit() should call
following helper in their setup instead of the prior :

	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
->
	netif_keep_dst(dev);

Instead of using a single bit, we use two bits, one being
eventually rebuilt in bonding/team drivers.

The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being
rebuilt in bonding/team. Eventually, we could add something
smarter later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should avoid NETDEV_TX_BUSY as much as possible.

They should stop the tx queue before qdisc even tries to push another
packet, to avoid requeues.

For a driver supporting skb->xmit_more, this is likely to be a prereq
anyway, otherwise we could have a tx deadlock : We need to force a
doorbell if TX ring is full.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GENET MAC has three Tx ring priority registers:
- GENET_x_TDMA_PRIORITY0 for queues 0-5
- GENET_x_TDMA_PRIORITY1 for queues 6-11
- GENET_x_TDMA_PRIORITY2 for queues 12-16

Fix bcmgenet_init_multiq() to program them correctly.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust fixed_phy_register() to return struct phy_device *, so that
it becomes easy to use fixed PHYs without device tree support:

  phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL);
  fixed_phy_set_link_update(phydev, fixed_phy_link_update);
  phy_connect_direct(netdev, phydev, handler_fn, phy_interface);

This change is a prerequisite for modifying bcmgenet driver to work
without a device tree on Broadcom's MIPS-based 7xxx platforms.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Probably not a big deal, but we'd better just use the
one we get in retry loop.

Fixes: commit 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe")
Reported-by: Joe Perches <joe@perches.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a openvswitch compilation error when CONFIG_INET is not set:

=====================================================
   In file included from include/net/geneve.h:4:0,
                       from net/openvswitch/flow_netlink.c:45:
		          include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads':
			  >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration]
			  >>      return iptunnel_handle_offloads(skb, udp_csum, type);
			  >>           ^
			  >>           >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast
			  >>           >>    cc1: some warnings being treated as errors

=====================================================
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a sparse warning introduced by commit:
f5796684 (openvswitch: Add support for
Geneve tunneling.) caught by kbuild test robot:

reproduce:
  # apt-get install sparse
  #   git checkout f5796684
  #     make ARCH=x86_64 allmodconfig
  #       make C=1 CF=-D__CHECK_ENDIAN__
  #
  #
  #       sparse warnings: (new ones prefixed by >>)
  #
  #       >> net/openvswitch/vport-geneve.c:109:15: sparse: incorrect type in assignment (different base types)
  #          net/openvswitch/vport-geneve.c:109:15:    expected restricted __be16 [usertype] sport
  #             net/openvswitch/vport-geneve.c:109:15:    got int
  #             >> net/openvswitch/vport-geneve.c:110:56: sparse: incorrect type in argument 3 (different base types)
  #                net/openvswitch/vport-geneve.c:110:56:    expected unsigned short [unsigned] [usertype] value
  #                   net/openvswitch/vport-geneve.c:110:56:    got restricted __be16 [usertype] sport
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a sparse warning introduced by Commit
0b5e8b8e (net: Add Geneve tunneling
protocol driver) caught by kbuild test robot:

  # apt-get install sparse
  #   git checkout 0b5e8b8e
  #     make ARCH=x86_64 allmodconfig
  #       make C=1 CF=-D__CHECK_ENDIAN__
  #
  #
  #       sparse warnings: (new ones prefixed by >>)
  #
  #       >> net/ipv4/geneve.c:230:42: sparse: incorrect type in assignment (different base types)
  #          net/ipv4/geneve.c:230:42:    expected restricted __be32 [addressable] [assigned] [usertype] s_addr
  #             net/ipv4/geneve.c:230:42:    got unsigned long [unsigned] <noident>
  #
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hannes Frederic Sowa says:

====================
ipv6: cleanup after rt6_genid removal

Leftover patches after rt6_genid removal after 705f1c86 ("ipv6:
remove rt6i_genid").

Major two changes are:
* keep fib6_sernum per namespace to reduce number of flushes in case
  system has high number of namespaces
* make fn_sernum updates cheaper

v2: Incorporated feedback from Cong Wang, thanks a lot!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Try to reduce number of possible fn_sernum mutation by constraining them
to their namespace.

Also remove rt_genid which I forgot to remove in 705f1c86 ("ipv6:
remove rt6i_genid").

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t
to fib6_walk_state as recommended by Cong Wang.

Cc: Cong Wang <cwang@twopensource.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marking this as static allows compiler to inline it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

-Add __rcu annotation on table to fix sparse warnings:
net/phonet/pn_dev.c:279:25: warning: incorrect type in assignment (different address spaces)
net/phonet/pn_dev.c:279:25:    expected struct net_device *<noident>
net/phonet/pn_dev.c:279:25:    got void [noderef] <asn:4>*<noident>
net/phonet/pn_dev.c:376:17: warning: incorrect type in assignment (different address spaces)
net/phonet/pn_dev.c:376:17:    expected struct net_device *volatile <noident>
net/phonet/pn_dev.c:376:17:    got struct net_device [noderef] <asn:4>*<noident>
net/phonet/pn_dev.c:392:17: warning: incorrect type in assignment (different address spaces)
net/phonet/pn_dev.c:392:17:    expected struct net_device *<noident>
net/phonet/pn_dev.c:392:17:    got void [noderef] <asn:4>*<noident>

-Access table with rcu_access_pointer (fixes the following sparse errors):
net/phonet/pn_dev.c:278:25: error: incompatible types in comparison expression (different address spaces)
net/phonet/pn_dev.c:391:17: error: incompatible types in comparison expression (different address spaces)
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Fastabend says:

====================
net sched rcu updates

This fixes the use of tcf_proto from RCU callbacks it requires
moving the unbind calls out of the callbacks and removing the
tcf_proto argument from the tcf_em_tree_destroy().

This is a rework of two previous series and addresses comments
from Cong. And should apply against latest net-next.

The previous series links below for reference:

(1/2) net: sched: do not use tcf_proto 'tp' argument from call_rcu
http://patchwork.ozlabs.org/patch/396149/

(2/2) net: sched: replace ematch calls to use struct net
http://patchwork.ozlabs.org/patch/396150/

net: sched: cls_cgroup tear down exts and ematch from rcu callback
http://patchwork.ozlabs.org/patch/396307/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Using the tcf_proto pointer 'tp' from inside the classifiers callback
is not valid because it may have been cleaned up by another call_rcu
occuring on another CPU.

'tp' is currently being used by tcf_unbind_filter() in this patch we
move instances of tcf_unbind_filter outside of the call_rcu() context.
This is safe to do because any running schedulers will either read the
valid class field or it will be zeroed.

And all schedulers today when the class is 0 do a lookup using the
same call used by the tcf_exts_bind(). So even if we have a running
classifier hit the null class pointer it will do a lookup and get
to the same result. This is particularly fragile at the moment because
the only way to verify this is to audit the schedulers call sites.
Reported-by: Cong Wang <xiyou.wangconf@gmail.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not RCU safe to destroy the action chain while there
is a possibility of readers accessing it. Move this code
into the rcu callback using the same rcu callback used in the
code patch to make a change to head.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This removes the tcf_proto argument from the ematch code paths that
only need it to reference the net namespace. This allows simplifying
qdisc code paths especially when we need to tear down the ematch
from an RCU callback. In this case we can not guarentee that the
tcf_proto structure is still valid.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some TSO engines might have a too heavy setup cost, that impacts
performance on hosts sending small bursts (2 MSS per packet).

This patch adds a device gso_min_segs, allowing drivers to set
a minimum segment size for TSO packets, according to the NIC
performance.

Tested on a mlx4 NIC, this allows to get a ~110% increase of
throughput when sending 2 MSS per packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restart autonegotiation is necessary after setting EEE.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case we find a general query with non-zero number of sources, we
are dropping the skb as it's malformed.

RFC3376, section 4.1.8. Number of Sources (N):

  This number is zero in a General Query or a Group-Specific Query,
  and non-zero in a Group-and-Source-Specific Query.

Therefore, reflect that by using kfree_skb() instead of consume_skb().

Fixes: d679c532 ("igmp: avoid drop_monitor false positives")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Earlier change to use usable slave array for TLB mode had an additional
performance advantage. So extending the same logic to all other modes
that use xmit-hash for slave selection (viz 802.3AD, and XOR modes).
Also consolidating this with the earlier TLB change.

The main idea is to build the usable slaves array in the control path
and use that array for slave selection during xmit operation.

Measured performance in a setup with a bond of 4x1G NICs with 200
instances of netperf for the modes involved (3ad, xor, tlb)
cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5

Mode        TPS-Before   TPS-After

802.3ad   : 468,694      493,101
TLB (lb=0): 392,583      392,965
XOR       : 475,696      484,517
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's a trivial fix to display xmit_hash_policy for this new TLB mode
since it uses transmit-hash-poilicy as part of bonding-master info
(/proc/net/bonding/<bonding-interface).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Amir Vadai says:

====================
net/mlx4_en: Optimizations to TX flow

This patchset contains optimizations to TX flow in mlx4_en driver. It also introduce
setting/getting tx copybreak, to enable controlling inline threshold dynamically.

TX flow optimizations was authored and posted to the mailing list by Eric
Dumazet [1] as a single patch. I splitted this patch to smaller patches,
Reviewed it and tested.
Changed from original patch:
- s/iowrite32be/iowrite32/, since ring->doorbell_qpn is stored as be32

The tx copybreak patch was also suggested by Eric Dumazet, and was edited and
reviewed by me. User space patch will be sent after kernel code is ready.

I am sending this patchset now since the merge window is near and don't want to
miss it.

More work need to do:
- Disable BF when xmit_more is in use
- Make TSO use xmit_more too. Maybe by splitting small TSO packets in the
  driver itself, to avoid extra cpu/memory costs of GSO before the driver
- Fix mlx4_en_xmit buggy handling of queue full in the middle of a burst
  partially posted to send queue using xmit_more

Eric, I edited the patches to have you as the Author and the first
signed-off-by. I hope it is ok with you (I wasn't sure if it is ok to sign by
you), anyway all the credit to those changes should go to you.

Patchset was tested and applied over commit 1e203c1a "(net: sched:
suspicious RCU usage in qdisc_watchdog")

[1] - https://patchwork.ozlabs.org/patch/394256/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of setting inline threshold using module parameter only on
driver load, use set_tunable() to set it dynamically.
No need to store the threshold per ring, using instead the netdev global
priv->prof->inline_thold
Initial value still is set using the module parameter, therefore
backward compatability is kept.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reorganize code to call is_inline() once, so compiler can inline it
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Properly clear tx_info->ts_requested
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Access skb_headlen() once in tx flow
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Acces skb_shinfo(skb) once in tx flow.
Also, rename @i variable to @i_frag to avoid confusion, as the "goto
tx_drop_unmap;" relied on this @i variable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4_en_process_tx_cq() carefully fetches and writes ring->last_nr_txbb
and ring->cons only one time to avoid false sharing
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4_en_free_tx_desc() uses a prefetchw(&skb->users) to speed up
consume_skb()
prefetchw(&ring->tx_queue->dql) to speed up BQL update
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>