This patch implements gpio_chip's get_direction() routine, that
lets other drivers get particular GPIOs direction using
struct gpio_desc.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

of_find_gpio() is always called under an IS_ENABLED(CONFIG_OF), so the
dummy implementation provided for !OF configurations is not needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Some GPIO irqchip drivers exploit the irqdomain mapping
function to set up the IRQ default type in the hardware,
make sure that if we pass IRQ_TYPE_NONE, no hardware setup
whatsoever takes place (this should be the norm) until
later when the IRQ gets utilized.

Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This saves a few unwind code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This is just enough to automatically enable the functional clock, if
present. Clock management during suspend/resume is still to be added.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-gpio@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Make the module alias match the platform device name, so gpio-kempld module
should now autoload correctly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The memory for ts is allocated by devm_kzalloc now, so the kfree is not
required.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch converts GE I/O FPGA GPIO driver to platform driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

As demonstrated by commit
390d82e3
"gpiolib: ACPI: remove gpio_to_desc() usage"

gpio_to_desc() must die. Replace one of its usage by the
newly-introduced gpiochip_get_desc() function.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Read gpio output value from ZEVIO_GPIO_OUTPUT.
The spin_lock is required to ensure the direction is not changed before reading
input/ouput value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Another feature that is duplicated in a number of GPIO irqchips
is that these cascades IRQs are assigned their own lock class
so as to avoid warnings about lockdep recursions. Do this also
in the generic GPIO irqchip helpers for smooth transition to
this core infrastructure.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

According to the datasheet, writing to the level register has no effect
when GPIO is programmed as input. Actually the the level register is
read-only when configured as input. Thus presetting the output level
before switching to output is _NOT_ possible. Any writes are lost!
Hence we set the level after configuring the GPIO as output.
But we cannot prevent a short low pulse if direction is set to high and
an external  pull-up is connected.
Signed-off-by: Daniel Krueger <daniel.krueger@systec-electronic.com>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This is a DT-only driver and it will be built only when CONFIG_OF is set.
So it's pointless to use of_match_ptr.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The driver calls irq_alloc_domain_generic_chips() which creates a gc and
adds it to gc_list. The driver later then calls irq_setup_generic_chip()
which also initializes the gc and adds it to the gc_list() and this
corrupts the list. Enable LIST_DEBUG and you see the kernel complain.
This isn't required, irq_alloc_domain_generic_chips() did the init.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Alan Tull <delicious.quinoa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

I've been maintaining this driver by fixing all issues
found while migrating OMAP2+ towards Device Tree based
booting and keeping it up-to-date by using the latest
infraestructure that is provided by the GPIO subsystem.

It would be nice if people know that I care about this
driver and put me in copy when sending patches for it.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Converts the GPIO OMAP driver to register its chained irq
handler and irqchip using the helpers in the gpiolib core.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The ARCH_OMAP config option was used to built the GPIO OMAP
driver but this is not consistent with the rest of the GPIO
drivers that have their own Kconfig option.

Also, this make it harder to add dependencies or reverse
dependencies (i.e: select) since that would mean touching the
sub-arch config option.

So is better to add a boolean Kconfig option for this driver
that defaults to true if ARCH_OMAP is enabled.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The gpiochip_add() function can fail if the chip cannot
be registered so the return value has to be checked and
the error propagated in case it happens.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The GPIO OMAP driver supports different OMAP SoC families and
not all of them have the needed support to use the linear IRQ
domain mapping like OMAP1 that use the legacy domain mapping.

But this special check is not necessary since the simple IRQ
domain mapping is able to handle both cases. Having a zero
IRQ offset will be interpreted as a linear domain case while
a non-zero value will be interpreted as a legacy domain case.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

GPIO_TIMBERDALE doesn't need an explicit dependency on HAS_IOMEM,
because it depends on MFD_TIMBERDALE which itself depends on
HAS_IOMEM already.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds some documentation about the GPIO irqchips, what types
exist etc.
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Now that the gpiolib irqchip helpers can support nested, threaded
IRQ handlers, switch the TC3589x driver over to using this new
infrastructure. Tested on the Ux500.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The static IRQ base is not used on any platforms with this chip
(only Ux500). Get rid of it forever, and rely on dynamic IRQ
descriptor allocation.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Grab state container and irq using the devm_* functions and save
some lines of hairy clean-up code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Some off-chip GPIO expanders need to be communicated by I2C or
SPI traffic, but may still support IRQs. By the sleeping nature
of such buses, such IRQ handlers need to be threaded. Support
such handlers in the gpiochip irqchip helpers by flagging IRQs
as threaded if the .can_sleep property of the gpiochip is
true.

Helpfully deny registration of chained IRQ handlers if the
.can_sleep property is set, as such chips will invariably need
a nested handler rather than a chained handler.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: <stable@vger.kernel.org>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This merges the patch to fix possible loss of dirty bit on munmap() or
madvice(DONTNEED).  If there are concurrent writers on other CPU's that
have the unmapped/unneeded page in their TLBs, their writes to the page
could possibly get lost if a third CPU raced with the TLB flush and did
a page_mkclean() before the page was fully written.

Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another
thread is still busy writing to it, you deserve all the lost writes you
could get.  But we kernel people hold ourselves to higher quality
standards than "crazy people deserve to lose", because, well, we've seen
people do all kinds of crazy things.

So let's get it right, just because we can, and we don't have to worry
about it.

* safe-dirty-tlb-flush:
  mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts

Pull btrfs fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: limit the path size in send to PATH_MAX
  Btrfs: correctly set profile flags on seqlock retry
  Btrfs: use correct key when repeating search for extent item
  Btrfs: fix inode caching vs tree log
  Btrfs: fix possible memory leaks in open_ctree()
  Btrfs: avoid triggering bug_on() when we fail to start inode caching task
  Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
  btrfs: replace error code from btrfs_drop_extents
  btrfs: Change the hole range to a more accurate value.
  btrfs: fix use-after-free in mount_subvol()

Pull arm fixes from Russell King:
 "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me
  to take during the merge window.  This stuff should have been better
  tested and sorted out *before* the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B
  ARM: 8041/1: pj4: fix cpu_is_pj4 check
  ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor
  ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set
  ARM: 8038/1: iwmmxt: explicitly check for supported architectures

Pull arm64 fixes from Catalin Marinas:
 - compat renameat2 syscall wiring and __NR_compat_syscalls fix
 - TLB fix for transparent huge pages following switch to generic
   mmu_gather
 - spinlock initialisation for init_mm's context
 - move of_clk_init() earlier
 - Kconfig duplicate entry fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: init: Move of_clk_init to time_init
  arm64: initialize spinlock for init_mm's context
  arm64: debug: remove noisy, pointless warning
  arm64: mm: Add THP TLB entries to general mmu_gather
  arm64: add renameat2 compat syscall
  ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"
  arm64: __NR_compat_syscalls fix

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts

Pull tty/serial fixes from Greg KH:
 "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of
  reported issues in the 8250 and samsung serial drivers, as well as a
  character loss fix for the tty core that was caused by the lock
  removal patches a release ago"

* tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial_core: fix uart PORT_UNKNOWN handling
  serial: samsung: Change barrier() to cpu_relax() in console output
  serial: samsung: don't check config for every character
  serial: samsung: Use the passed in "port", fixing kgdb w/ no console
  serial: 8250: Fix thread unsafe __dma_tx_complete function
  8250_core: Fix unwanted TX chars write
  tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 3.15-rc3.

  Nothing major at all, just some assorted issues that people have
  reported"

* tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data
  iio: adc: mxs-lradc: fix warning when buidling on avr32
  iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
  iio: querying buffer scan_mask should return 0/1
  staging:iio:ad2s1200 fix a missing break
  iio: adc: at91_adc: correct default shtim value
  ARM: at91: at91sam9260: change at91_adc name
  ARM: at91: at91sam9g45: change at91_adc name
  iio: cm32181: Fix read integration time function
  iio: adc: at91_adc: Repair broken platform_data support

Merge tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some kernfs fixes for 3.15-rc3 that resolve some reported
  problems.  Nothing huge, but all needed"

* tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  s390/ccwgroup: Fix memory corruption
  kernfs: add back missing error check in kernfs_fop_mmap()
  kernfs: fix a subdir count leak

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.15-rc3.  The majority are gadget
  fixes, as we didn't get any of those in for 3.15-rc2.  The others are
  all over the place, and there's a number of new device id addtions as
  well."

* tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: option: add and update a number of CMOTech devices
  usb: option: add Alcatel L800MA
  usb: option: add Olivetti Olicard 500
  usb: qcserial: add Sierra Wireless MC7305/MC7355
  usb: qcserial: add Sierra Wireless MC73xx
  usb: qcserial: add Sierra Wireless EM7355
  USB: io_ti: fix firmware download on big-endian machines
  usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  xhci: extend quirk for Renesas cards
  xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  phy: fix kernel oops in phy_lookup()
  phy: restore OMAP_CONTROL_PHY dependencies
  phy: exynos: fix building as a module
  USB: serial: fix sysfs-attribute removal deadlock
  usb: wusbcore: fix panic in wusbhc_chid_set
  usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
  uwb: don't call spin_unlock_irq in a USB completion handler
  usb: chipidea: coordinate usb phy initialization for different phy type
  ...

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent ACPI regression related to device
  notifications, intel_idle fix related to IvyTown support, fix for a
  buffer size issue in ACPICA, PM core fix related to the "freeze" sleep
  state, four fixes for various types of breakage in cpufreq drivers, a
  PNP workaround for a wrong memory region size in ACPI tables, and a
  fix and cleanup for the ACPI tools Makefile.

  Specifics:

   - Fix for broken ACPI notifications on some systems caused by a
     recent ACPI hotplug commit that blocked the propagation of unknown
     type notifications to device drivers inadvertently.

   - intel_idle fix to make the IvyTown C-states handling (added
     recently) work as intended which now is broken due to missing
     braces.  From Christoph Jaeger.

   - ACPICA fix to make it allocate buffers of the right sizes for the
     Generic Serial Bus operation region access.  From Lv Zheng.

   - PM core fix unblocking cpuidle before entering the "freeze" sleep
     state which causes that state to be able to actually save more
     energy than runtime idle.

   - Configuration and build fixes for the highbank and powernv cpufreq
     drivers from Kefeng Wang and Srivatsa S Bhat.

   - Coccinelle warning fix related to error pointers for the unicore32
     cpufreq driver from Duan Jiong.

   - Integer overflow fix for the ppc-corenet cpufreq driver from Geert
     Uytterhoeven.

   - Workaround for BIOSes that don't report the entire Intel MCH area
     in their ACPI tables from Bjorn Helgaas.

   - ACPI tools Makefile fix and cleanup from Thomas Renninger"

* tag 'pm+acpi-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / notify: Do not block unknown type notifications in root handler
  PNP: Work around BIOS defects in Intel MCH area reporting
  cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning
  cpufreq: ppc: Fix integer overflow in expression
  cpufreq, powernv: Fix build failure on UP
  cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  PM / suspend: Make cpuidle work in the "freeze" state
  intel_idle: fix IVT idle state table setting
  ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses.
  tools/power/acpi: Minor bugfixes