- 25 Apr, 2016 5 commits
-
-
Hans Verkuil authored
The adv7180 attempts to autodetect the standard. Unfortunately this is seriously broken. This patch removes the autodetect completely. Only the querystd op will detect the standard. Since the design of the adv7180 requires that you switch to a special autodetect mode you cannot call querystd when you are streaming. So the s_stream op has been added so we know whether we are streaming or not, and if we are, then querystd returns EBUSY. After testing this with a signal generator is became obvious that a sleep is needed between changing the standard to autodetect and reading the status. So the autodetect can never have worked well. The s_std call now just sets the new standard without any querying. If the driver supports the interrupt, then when it detects a standard change it will signal that by sending the V4L2_EVENT_SOURCE_CHANGE event. With these changes this driver now behaves like all other video receivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Federico Vaga <federico.vaga@gmail.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Dan Carpenter authored
We print an uninitialized "actlen" variable on the error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Drop the 'experimental' annotations. The only remaining part of the API that is still marked 'experimental' are the debug ioctls/structs, and that is intentional. Only the v4l2-dbg application should use those. All others have been around for years, so it is time to drop the 'experimental' designation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Most of what is marked as 'experimental' has been around for years. Time to drop that annotation. The only remaining 'experimental' bits of the API are the debug ioctls and structs: these should remain experimental since the only application that should use this is v4l2-dbg. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
When determining if the standard is 50 or 60 Hz it is standard practice to test for 60 Hz instead of 50 Hz. This doesn't matter normally, except if the user specifies both 60 and 50 Hz standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 20 Apr, 2016 26 commits
-
-
Helen Mae Koike Fornazier authored
The test pattern generator will be used by other drivers as the virtual media controller (vimc) Signed-off-by: Helen Mae Koike Fornazier <helen.koike@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The v4l2_rect helper functions have been moved to include/media/v4l2-rect.h. Use this new header, dropping the functions from vivid. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
This makes it easier to share this code with any driver that needs to manipulate the v4l2_rect datastructure. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Instead of rolling our own define, just use the new mask defines. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The v4l2_device_call_* defines filter subdevs based on the grp_id value. But some drivers use a bitmask, so instead of filtering by grp_id == value, you want to filter by grp_id & value. Make variants of these defines to do this. The 'has_op' define has been extended to have a grp_id argument as well, and a mask variant has been added. This extra argument required a change to go7007. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Niklas Söderlund authored
The ADV7180 supports NTSC, PAL and SECAM. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Niklas Söderlund authored
Add support to get the pixel aspect ratio depending on the current standard (50 vs 60 Hz). Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Niklas Söderlund authored
Add support to get the standard to the adv7180 driver. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Claudiu Beznea authored
This patch defines region_configs[] array as const array since it is not changed anywhere in code. Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The DV_TIMINGS_CAP documentation didn't state clearly that the pad and reserved fields should be zeroed by the application. For subdev pad can be other values as well. It also mistakenly said that only drivers would have to zero the reserved field, that's not correct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The ENUM_DV_TIMINGS documentation did not clearly state that the pad and reserved fields should be zeroed (pad only when used with a video device node). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The G/S_EDID documentation did not explicitly state that the reserved array should be zeroed by the application. Also add the missing VIDIOC_SUBDEV_G/S_EDID ioctl names to the header. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
v4l2-compliance complained about this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Fix this smatch error: dib0090.c:1124 dib0090_pwm_gain_reset() error: we previously assumed 'state->rf_ramp' could be null (see line 1086) Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
These are false positives, but still easy to fix. pvrusb2-hdw.c:3676 pvr2_send_request_ex() error: we previously assumed 'write_data' could be null (see line 3648) pvrusb2-hdw.c:3829 pvr2_send_request_ex() error: we previously assumed 'read_data' could be null (see line 3649) Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The smatch utility got really confused about the grp % 22 code. Rewrote it so it now understands that there really isn't a buffer overwrite. vivid-rds-gen.c:82 vivid_rds_generate() error: buffer overflow 'rds->psname' 9 <= 43 vivid-rds-gen.c:83 vivid_rds_generate() error: buffer overflow 'rds->psname' 9 <= 42 vivid-rds-gen.c:89 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 84 vivid-rds-gen.c:90 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 85 vivid-rds-gen.c:92 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 86 vivid-rds-gen.c:93 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 87 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ezequiel Garcia authored
Set vb2_queue.gfp_flags to GFP_DMA32. Otherwise it will start to create bounce buffers which is something you want to avoid since those are in limited supply. Without this patch, DMA scatter-gather may not work because machines can ran out of buffers easily. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The mainline tw686x driver also supports audio, that's missing here as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Set vb2_queue.gfp_flags to GFP_DMA32. Otherwise it will start to create bounce buffers which is something you want to avoid since those are in limited supply. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
the dma_requests field is cached, but cache is not used: drivers/staging/media/tw686x-kh/tw686x-kh-video.c: In function 'tw686x_video_irq': drivers/staging/media/tw686x-kh/tw686x-kh-video.c:622:6: warning: variable 'requests' set but not used [-Wunused-but-set-variable] u32 requests; ^ Use the cache instead, as it seems reading it needs to be done with spin lock taken. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ezequiel Garcia authored
This commit introduces the support for the Techwell TW686x video capture IC. This hardware supports a few DMA modes, including scatter-gather and frame (contiguous). This commit makes little use of the DMA engine and instead has a memcpy based implementation. DMA frame and scatter-gather modes support may be added in the future. Currently supported chips: - TW6864 (4 video channels), - TW6865 (4 video channels, not tested, second generation chip), - TW6868 (8 video channels but only 4 first channels using built-in video decoder are supported, not tested), - TW6869 (8 video channels, second generation chip). [mchehab@osg.samsung.com: make checkpatch happy by using "unsigned int" instead of just "unsigned"] Cc: Krzysztof Halasa <khalasa@piap.pl> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Krzysztof Hałasa authored
A driver for Intersil/Techwell TW686x-based PCIe frame grabbers. [hans.verkuil@cisco.com: renamed staging tw686x to tw686x-kh to prevent naming conflicts] [hans.verkuil@cisco.com: don't build tw686x-kh if tw686x is already selected to prevent conflicts] [mchehab@osg.samsung.com: use "unsigned int" instead of just "unsigned" and add some whitespaces to make checkpatch happier] Signed-off-by: Krzysztof Halasa <khalasa@piap.pl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Those callbacks are called with the media_device.graph_mutex held. Add a note about that, as the code called by those notifiers should not be touching in the mutex. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Right now, the lock schema for media_device struct is messy, since sometimes, it is protected via a spin lock, while, for media graph traversal, it is protected by a mutex. Solve this conflict by always using a mutex. As a side effect, this prevents a bug when the media notifiers is called at atomic context, while running the notifier callback: BUG: sleeping function called from invalid context at mm/slub.c:1289 in_atomic(): 1, irqs_disabled(): 0, pid: 3479, name: modprobe 4 locks held by modprobe/3479: #0: (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160 #1: (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160 #2: (register_mutex#5){+.+.+.}, at: [<ffffffffa10596c7>] usb_audio_probe+0x257/0x1c90 [snd_usb_audio] #3: (&(&mdev->lock)->rlock){+.+.+.}, at: [<ffffffffa0e6051b>] media_device_register_entity+0x1cb/0x700 [media] CPU: 2 PID: 3479 Comm: modprobe Not tainted 4.5.0-rc3+ #49 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803b3f6f288 ffffffff81933901 ffff8803c4bae000 ffff8803c4bae5c8 ffff8803b3f6f2b0 ffffffff811c6af5 ffff8803c4bae000 ffffffff8285d7f6 0000000000000509 ffff8803b3f6f2f0 ffffffff811c6ce5 Call Trace: [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffff8155aade>] kmem_cache_alloc_trace+0x20e/0x300 [<ffffffffa0e66e3d>] ? media_add_link+0x4d/0x140 [media] [<ffffffffa0e66e3d>] media_add_link+0x4d/0x140 [media] [<ffffffffa0e69931>] media_create_pad_link+0xa1/0x600 [media] [<ffffffffa0fe11b3>] au0828_media_graph_notify+0x173/0x360 [au0828] [<ffffffffa0e68a6a>] ? media_gobj_create+0x1ba/0x480 [media] [<ffffffffa0e606fb>] media_device_register_entity+0x3ab/0x700 [media] Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 13 Apr, 2016 9 commits
-
-
Peter Rosin authored
s32tmp in the below code may be negative, and dev->mclk_khz is an unsigned type. s32tmp = 0x10000 * (tuner_frequency - c->frequency); s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk_khz); This is undefined, as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is of unsigned type. So, change mclk_khz to be signed (s32). Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Simon Horman authored
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The maximum image size supported by the WPF is 2048x2048 on Gen2 and 8190x8190 on Gen3. Update the code accordingly, and fix the maximum LIF size for both Gen2 and Gen3. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The format is erroneously defined with an alpha channel. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Make the global alpha multiplier of DRM planes configurable. All the necessary infrastructure is there, we just need to store the alpha value passed through the DRM API. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Make the Z-order of planes configurable by assigning RPFs to BRU inputs dynamically based on the Z-order position. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The Gen3 RPF includes an alpha multiplier that can both multiply the alpha channel by a fixed global alpha value, and multiply the pixel components to convert the input to premultiplied alpha. As alpha premultiplication is available in the BRU for both Gen2 and Gen3 we handle it there and use the Gen3 alpha multiplier for global alpha multiplication only. This prevents conversion to premultiplied alpha if no BRU is present in the pipeline, that use case will be implemented later if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Synchronize the userspace LUT setup with the pipeline operation by using a display list fragment to store LUT data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Display lists support up to 8 bodies but we currently use a single one. To support preparing display lists for large look-up tables, add support for multi-body display lists. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-