- 14 May, 2010 14 commits
-
-
Henk de Groot authored
Fixes the driver after merge into the 2.6.34 kernel. Driver should be functional again (a fix to make it compile broke the driver). Patch against 2.6.34 RC7 with patch-v2.6.34-rc7-next-20100513 already applied. Removed conditional code based on kernel version, this is pointless now the driver is part of the kernel. Also removed obsolte code left over from previous patches. Includes also small fixes to compile clean again. Signed-off-by: Henk de Groot <pe1dnn@amsat.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Nitin Gupta authored
Currently, each ramzswap device can be assigned a separate 'backing swap' file/partition. The ramzswap driver forwards swap I/O requests to this backing swap whenever an incompressible page is found. This feature adds nearly 700 lines of code and it also duplicates much of the swapon() functionality (for example, finding swap extents and so on). Removing this code makes the driver much simpler and should help its transition from staging to stable drivers area (drivers/block/). Similar functionality may be implemented if we can implement migrating pages across swap devices but the details have not yet been worked out. Support for _partitions_ as backing swap could be retained as it requires a few lines of code only. This part can be re-introduced later if above swap migration method turns out to be infeasible. More cleanups and code comments will be added soon. Signed-off-by: Nitin Gupta <ngupta@vflare.org> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Remove empty OUT definition used to specify output parameters. Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Remove empty IN definition used to specify input parameters. Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Removed custom macro for signed 8-bit integers, which was not used. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Removed custom macro for unsigned 32-bit integers. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Removed custom macro for unsigned 16-bit integers. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Removed custom macro for unsigned 8-bit integers. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Walker authored
Part of this code is already in my MSM tree. I'll move the rest forward through my tree also. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> CC: Pavel Machek <pavel@ucw.cz> CC: linux-arm-msm@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Barry Song authored
Signed-off-by: Barry Song <Barry.Song@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Anand Gadiyar authored
s/seperate/separate Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul E. McKenney authored
Remove all rcu head inits. We don't care about the RCU head state before passing it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can keep track of objects on stack. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
K. Y. Srinivasan authored
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 11 May, 2010 26 commits
-
-
Morgan Gatti authored
This is a patch to the usbdux.c file that resolve 2 errors in coding and fix the warning about lengt of code lines Signed-off-by: Morgan Gatti <morgan.gatti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Cleared all findings but a couple of 'do not add new typedefs' warnings. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julia Lawall authored
Drop cast on the result of kmalloc and similar functions. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; @@ - (T *) (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Zachary Richey authored
Fixed non static functions in prism2fw.c Signed-off-by: Zachary Richey <zr.public@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Randy Dunlap authored
Alan said that memrar should depend on RAR_REGISTER (instead of selecting it). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ossama Othman <ossama.othman@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Prashant P. Shah authored
This is a patch to the wl_profile.c file that fixes the C99 comments style issues found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mark authored
This patch fixes quite a few long line lengths in comedi.h as reported by checkpatch.pl Signed-off-by: Mark Rankilor <reodge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Larry Finger authored
In http://bugzilla.novell.com/show_bug.cgi?id=597299, the vt6655 driver generates a kernel BUG on a NULL pointer dereference at NULL. This problem has been traced to a failure in the wpa_set_wpadev() routine. As the vt6656 driver does not call this routine, the vt6655 code is similarly set to skip the call. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Richard Meek <osl2008@googlemail.com> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andres More authored
Resolved all warnings/errors but lines having over 80 characters. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Now that the code actually gets selected in the kernel config properly, all of the build errors start showing up. This patch papers over a few of them to get the code to build, I have no idea if it actually works now or not... Cc: Henk de Groot <pe1dnn@amsat.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Change the wireless drivers to depend on CONFIG_WLAN instead of CONFIG_WLAN_80211 which is gone. Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Haiyang Zhang authored
Credits go to Joe Perches <joe@perches.com> for suggesting the changes. Cc: Joe Perches <joe@perches.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Prashant P. Shah authored
This is a patch to the wl_profile.c file that fixes the unnecessary braces style issues found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Prashant P. Shah authored
This is a patch to the wl_profile.c file that fixes whitespace issues found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marin Mitov authored
The previous patch "use_local_copy_qtype_ops.patch" http://lkml.org/lkml/2010/5/9/40 has introduced a new BUG. This patch corrects it. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marin Mitov authored
dt3155v4l driver, as in -rc6-next-20100506 has a BUG. When it modifies q->int_ops structure in videobuf-dma-contig module the change is visible for all other modules using it. Make a local copy of this structure and use its modification to solve the bug. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Takanori Suzuki authored
This patch replaces <asm/uaccess.h> with <linux/uaccess.h> to comply with the checkpatch.pl hint. Signed-off-by: Takanori Suzuki <mail.tks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
H Hartley Sweeten authored
The rtl8192e, rtl8192su, and rtl8192u drivers all share what appears to be a common private ieee80211 stack. Various patches have been applied to the rtl819x_Qos.h file for some of the drivers but not the others. This sync's the files based on all the applied patches. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
H Hartley Sweeten authored
The rtl8192e, rtl8192su, and rtl8192u drivers all share what appears to be a common private ieee80211 stack. Various patches have been applied to the rtl819x_TSProc.c file for some of the drivers but not the others. This sync's the files based on all the applied patches. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Lars Lindley authored
I fixed all problems found by checkpatch.pl except a number of long lines that I didn't find a good way to break up and still keep it readable. I added the () to #define MAX_IE_APPEND_SIZE (256 + 4). I also moved som comments around after pointers from Pekka. Signed-off-by: Lars Lindley <lindley@coyote.org> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
This actually gets the adis16255 driver to build properly. Cc: Matthias Brugger <mensch0815@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthias Brugger authored
This patch adds the adis16255 driver to the build system under the staging directory. It solves also most issues mentioned in TODO list: - sample rate exported to sysfs - spi_adis16255_bringup and spi_adis16255_shutdown encapsulated - chip selftest in spi_adis16255_bringup - kernel messages reduced to a reasonable number I removed the TODO file, because ther was only the reset of the gyroscope left. This is IMOH not necessary for the actual driver. There are also some typos in adis.c file. This patch should get rid of them as well. Signed-off-by: Matthias Brugger <mensch0815@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Barry Song authored
Signed-off-by: Barry Song <Barry.Song@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-