Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/pci-2.6

Too much cut-and-paste, hidden by the fact that without debugging,
"dev_dbg()" doesn't even look at its arguments.

It apparently really confuses some things (Apple keyboard
internal hub for one, but possibly others).

	This tiny bit of the last WE-17 patch was lost between me and
you. I initially decided to wait to resubmit, but Chris Wedgwood
reported that the MadWifi driver needs it. Sorry for not having pushed
harder.
	I recreated this patch, and tested with 2.6.10-rc1, and Chris
tested it with MadWifi. Would you mind pushing that up to Linus ?

Changelog :
	o remove unneeded const
	o spelling + comments
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Experimented a bit more with mounting a bad ext2 filesystem.

An immediate crash was caused by zero EXT2_BLOCKS_PER_GROUP(sb).
The patch below (relative to 2.6.9) adds a few checks to make sure
that things we divide by are not zero.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

On Thu, Nov 04, 2004 at 12:52:38PM -0800, Greg KH wrote:
> Hi,
>
> I get the following BUG in the sysfs code when I do:
> 	- plug in a usb-serial device.
> 	- open the port with 'cat /dev/ttyUSB0'
> 	- unplug the device.
> 	- stop the 'cat' process with control-C
>
> This used to work just fine before your big sysfs changes.

There is a similar problem reported by s390 people where we see parent
kobject (directory) going away before child kobject (sub-directory). It
seems kobject code is able to handle this, but not the sysfs. What could
be happening that in sysfs_remove_dir() of parent directory, we try to
remove its contents. It works well with the regular files as it is the
final removal for sysfs_dirent corresponding to the files. But in case
of sub-directory we are doing an extra sysfs_put().  Once while removing
parent and the other one being the one from when sysfs_remove_dir() is
called for the child.

The following patch worked for the s390 people, I hope same will work in
this case also.


o Do not remove sysfs_dirents corresponding to the sub-directory in
  sysfs_remove_dir(). They will be removed in the sysfs_remove_dir() call
  for the specific sub-directory.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The spin_unlock() in rotate_reclaimable_page() is not a sufficient memory
barrier.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

"clear_buffer_locked()" is just a nicer name for a clear-bit, and
on x86 (and others) we don't need any expensive memory barriers
after that.

into kroah.com:/home/greg/linux/BK/driver-2.6

into kroah.com:/home/greg/linux/BK/usb-2.6

kfifo_alloc tries to round up the buffer size to the next power of two.

But it accidently uses the original size when calling kfifo_init,
which will BUG.
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a relatively small changeset, to address small nagging problems.
Andrew pointed me at the double registration specifically, so I had to do
something about it. At least now Fabio's box won't collapse if he configures
UB by mistake. Also, a few people complained that the help text was
misleading.

I have not done anything about the oops on disconnect which happens to
Martin Schlemmer. It's next. After that I can get to Peter Jones' CD
burning patch and doing resets.

- Fix double kobject registration and eventual oops on unplug if a device
  is not cooperating.
- Add a reference to usb-storage into the configuration help.
- Just upping timeouts fixes my ZIP drive.
- Max out the diag (trace) file size.
- Set capacity to zero in case the media is absent. It works in 2.4.10-rc1.
  Either Al fixed the block layer, or the whole thing was a bug in ub.c
  (and sd.c) and a big misunderstanding.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Attached patch adds a MAINTAINER entry for the kernel event layer.
Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Looks like kobject_uevent_init is executed before netlink_proto_init and
consequently always fails.  Not cool.

Attached patch switches the initialization over from core_initcall (init
level 1) to postcore_initcall (init level 2).  Netlink's initialization
is done in core_initcall, so this should fix the problem.  We should be
fine waiting until postcore_initcall.

Also a couple white space changes mixed in, because I am anal.
Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Thanks to Serge Hallyn <serue@us.ibm.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This clarifies more of the x86 caller/callee stack ownership
issues by making the exception and interrupt handler assembler
interfaces use register calling conventions.

System calls still use the stack.

Tested with "crashme" on UP/SMP.

 df_05_device_add_ref_fix.patch

 In device_add(), @dev wan't put'd properly when it has zero length
bus_id (error path).  Fixed.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_04_kobject_add_ref_fix.patch

In kobject_add(), @kobj wasn't put'd properly on error path.  This
patch fixes it.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_03_sysfs_release_fix.patch

Some attributes are allocated dynamically (e.g. module and device
parameters) and are usually deallocated when the assoicated kobject is
released.  So, it's not safe to access attr after putting the kobject.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_02_bus_rescan_devcies_fix.patch

 bus_rescan_devices() eventually calls device_attach() and thus
requires write locking the corresponding bus.  The original code just
called bus_for_each_dev() which only read locks the bus.  This patch
separates __bus_for_each_dev() and __bus_for_each_drv(), which don't
do locking themselves, out from the original functions and call them
with read lock in the original functions and with write lock in
bus_rescan_devices().
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_01_driver_attach_comment_fix.patch

bus_match() was renamed to driver_probe_device() but the comment for
device_attach() wasn't updated.  This patch updates it.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add the sysfs path of the physical device to the hotplug event of class
and block devices. This should solve the userspace issue not to know if
the device is a virtual one and the "device" symlink will never be created,
but we sit there and wait for it to show up not knowing when we should
give up.

Also the bus name is added to the hotplug event, so we don't need to
reverse lookup in the /sys/bus/* directory which bus our physical
device belongs to. This is e.g. the value matched against the BUS= key,
that may be used in an udev rule.

This is a PCI network card:
  ACTION=add
  SUBSYSTEM=net
  DEVPATH=/class/net/eth0
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:01.0
  PHYSDEVBUS=pci
  INTERFACE=eth0
  SEQNUM=827
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is a IDE CDROM:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/hdc
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1f.1/ide1/1.0
  PHYSDEVBUS=ide
  SEQNUM=1017
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is an USB-stick partition:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/sda/sda1
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host1/target1:0:0/1:0:0:0
  PHYSDEVBUS=scsi
  SEQNUM=1032
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We need to open the gap between congestion on/off a little bit, or we
risk burning many cycles continually putting processes on a wait queue
only to wake them up again immediately. This was observed with CFQ at
least, which showed way excessive sys time.

Patch is from Arjan.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Patch is from Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: David S. Miller <davem@davemloft.net>

Using idr_get_new_above in init_new_context lets us get rid of an
awkward init function which wasn't running early enough in boot
anyway.
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The routine ext2_readdir() will, when reading a directory page
returns an error, try the next page, without reporting the
error to user space. That is bad, and the patch below changes that.

In my case the filesystem was damaged, and ext2_readdir wanted
to read 60000+ pages and wrote as many error messages to syslog
("attempt to access beyond end"), not what one wants.

[no doubt a similar patch is appropriate for ext3]

This preserves 2.4.x behavior.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch adds the cypress_m8 usb-serial driver for the Delorme Earthmate usb gps and the Cypress hid->com rs232 adapter to the kernel tree.
Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The patch below adds support for the KC2190 usb-to-usb networking
device; the version I have reports itself as:

Bus 001 Device 003: ID 050f:0190 KC Technology, Inc.

I was under the impression that support for this had been added a long
time ago, but searching through old kernel versions all I could find was
a comment about the chip, with no support. Patch is against 2.6.9 but is
pretty minimal.

I don't have a Windows box around to test interoperability with that
driver, but the patch appears to make it work perfectly between 2 Linux
boxes.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

It is updated outside of locks, so...
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OMAP-1510 the 48MHz DPLL used by USB is now set up earlier in
the boot process.  On Innovator, both host ports work by default.
(Although USB2 conflicts with ttyS2, which you might prefer.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch updates the serial gadget driver:

 - The bulk is Al Borcher's version 2.0 updates:

     * Use the new utilities to build config descriptors from tables.

     * Add CDC ACM support, which brings lots of goodness including
       interop with Windows.

     * Work better given PXA 25x hardware automagic.

 - I have a few minor tweaks.

     * Match the recent tty API change:  from_user is gone!!

     * Define new product ID for the CDC ACM version, so Windows
       registry won't get confused by the non-ACM version.

     * Add OTG descriptor

     * Allocates packet buffers more efficiently on platforms like
       OMAP: use kmalloc not the dma-coherent allocator.

Al has some docs on how to talk to Windows this, including an INF file.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>