- 01 Apr, 2009 40 commits
-
-
dann frazier authored
Signed-off-by:
dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
dann frazier authored
Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by:
-
Andrew Morton authored
- the LEAP_YEAR macro is buggy - it references its arg multiple times. Fix this by turning it into a C function. - give it a more approriate name - Move it to rtc.h so that other .c files can use it, instead of copying it. Cc: dann frazier <dannf@hp.com> Acked-by:
Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Mark Brown authored
These are the only two ioctls so the ioctl() function is also removed. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Ian Kent authored
autofs_dev-ioctl.h is included by both the kernel module and user space tools and it includes two kernel header files. Compiles work if the kernel headers are installed but fail otherwise. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Ian Kent authored
A deadlock can occur when user space uses a signal (autofs version 4 uses SIGCHLD for this) to effect expire completion. The order of events is: Expire process completes, but before being able to send SIGCHLD to it's parent ... Another process walks onto a different mount point and drops the directory inode semaphore prior to sending the request to the daemon as it must ... A third process does an lstat on on the expired mount point causing it to wait on expire completion (unfortunately) holding the directory semaphore. The mount request then arrives at the daemon which does an lstat and, deadlock. For some time I was concerned about releasing the directory semaphore around the expire wait in autofs4_lookup as well as for the mount call back. I finally realized that the last round of changes in this function made the expiring dentry and the lookup dentry separate and distinct so the check and possible wait can be done anywhere prior to the mount call back. This patch moves the check to just before the mount call back and inside the directory inode mutex release. Signed-off-by:
-
Ian Kent authored
A significant portion of the autofs_dev_ioctl_expire() and autofs4_expire_multi() functions is duplicated code. This patch cleans that up. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Johannes Weiner authored
Use kzfree() instead of memset() + kfree(). Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
Anton Vorontsov authored
The advantages of this: - Don't encourage legacy support; - Less external symbols, less code to compile-in for !MPC832x_RDB platforms. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Anton Vorontsov authored
- Add gpio-controller node to manage QE GPIO Bank D; - Add mmc-spi node; - Modify board file so that it won't use legacy SPI support with the new device trees. Signed-off-by:
-
Anton Vorontsov authored
The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by:
-
Anton Vorontsov authored
Implement full support for OF SPI bindings. Now the driver can manage its own chip selects without any help from the board files and/or fsl_soc constructors. The "legacy" code is well isolated and could be removed as time goes by. Signed-off-by:
-
Anton Vorontsov authored
The main purpose of this patch is to pass 'struct spi_device' to the chip select handling routines. This is needed so that we could implement full-fledged OpenFirmware support for this driver. While at it, also: - Replace two {de,activate}_cs routines by single cs_contol(). - Don't duplicate platform data callbacks in mpc83xx_spi struct. Signed-off-by: -
Anton Vorontsov authored
The patch fixes following sparse warnings: CHECK spi_mpc83xx.c spi_mpc83xx.c:145:1: warning: symbol 'mpc83xx_spi_rx_buf_u8' was not declared. Should it be static? spi_mpc83xx.c:146:1: warning: symbol 'mpc83xx_spi_rx_buf_u16' was not declared. Should it be static? spi_mpc83xx.c:147:1: warning: symbol 'mpc83xx_spi_rx_buf_u32' was not declared. Should it be static? spi_mpc83xx.c:148:1: warning: symbol 'mpc83xx_spi_tx_buf_u8' was not declared. Should it be static? spi_mpc83xx.c:149:1: warning: symbol 'mpc83xx_spi_tx_buf_u16' was not declared. Should it be static? spi_mpc83xx.c:150:1: warning: symbol 'mpc83xx_spi_tx_buf_u32' was not declared. Should it be static? spi_mpc83xx.c:175:32: warning: incorrect type in initializer (different address spaces) spi_mpc83xx.c:175:32: expected void *tmp_ptr spi_mpc83xx.c:175:32: got unsigned int [noderef] <asn:2>*<noident> spi_mpc83xx.c:183:26: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:183:26: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:183:26: got void *tmp_ptr spi_mpc83xx.c:184:26: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:184:26: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:184:26: got void *tmp_ptr spi_mpc83xx.c:287:31: warning: incorrect type in initializer (different address spaces) spi_mpc83xx.c:287:31: expected void *tmp_ptr spi_mpc83xx.c:287:31: got unsigned int [noderef] <asn:2>*<noident> spi_mpc83xx.c:295:25: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:295:25: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:295:25: got void *tmp_ptr spi_mpc83xx.c:296:25: warning: incorrect type in argument 1 (different address spaces) spi_mpc83xx.c:296:25: expected unsigned int [noderef] [usertype] <asn:2>*reg spi_mpc83xx.c:296:25: got void *tmp_ptr spi_mpc83xx.c:486:13: warning: symbol 'mpc83xx_spi_irq' was not declared. Should it be static? Signed-off-by:
-
Wu Fengguang authored
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12843 "I use ramfs instead of tmpfs for /tmp because I don't use swap on my laptop. Some apps need 1777 mode for /tmp directory, but ramfs does not support 'mode=' mount option." Reported-by:
Avan Anishchuk <matimatik@gmail.com> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Daniel Mack authored
Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Eric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Daniel Mack authored
This solves the dependency between lis3lv02d.[ch] and ACPI specific methods. It introduces a ->bus_priv pointer to the device struct which is casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c accordingly. Signed-off-by:
-
Daniel Mack authored
Move lis3lv02d_init_device() down so that the forward declaration of lis3lv02d_add_fs() becomes unnecessary. Signed-off-by:
-
Luca Cappa authored
I have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL and HP_ACCEL module drivers. While loading it cannot recognize the laptop model, so i am sending the necessary information to update the database of axis orientations. >When the laptop is horizontal the position reported is about 0 for X and Y >and a positive value for Z Yes, it is about 0,0,1000, the actual reading says: (-17,-26,1018); > If the left side is elevated, X increases (becomes positive) Yes, X goes toward to positive 1000. >If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) No, Y goes toward to positive 1000. >If the laptop is put upside-down, Z becomes negative Yes, the laptop on a table Z gives 1000, and if upsidedown the Z reads -1000. So in few words the Y axis is inverted. Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
Pavel Machek authored
Add two more laptops to whitelist. Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Ira Snyder authored
Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by:
-
Davide Rizzo authored
An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by:
Davide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by:
-
Pavel Machek authored
As Andrew noted, adev is pretty poor name for symbol being exported. Rename it to lis3. Signed-off-by:
-
Pavel Machek authored
Fix english in Documentation, add "how to test" description. Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by:
-
Davide Libenzi authored
Introduce keyed event wakeups inside the TTY code. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by:
-
Davide Libenzi authored
Introduce keyed event wakeups inside the eventfd code. Signed-off-by:
-
Davide Libenzi authored
Use the events hint now sent by some devices, to avoid unnecessary wakeups for events that are of no interest for the caller. This code handles both devices that are sending keyed events, and the ones that are not (and event the ones that sometimes send events, and sometimes don't). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Davide Libenzi authored
Add support for event-aware wakeups to the sockets code. Events are delivered to the wakeup target, so that epoll can avoid spurious wakeups for non-interesting events. Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by:
-
Davide Libenzi authored
Introduce new wakeup macros that allow passing an event mask to the wakeup targets. They exactly mimic their non-_poll() counterpart, with the added event mask passing capability. I did add only the ones currently requested, avoiding the _nr() and _all() for the moment. Signed-off-by:
-
Davide Libenzi authored
This patchset introduces wakeup hints for some of the most popular (from epoll POV) devices, so that epoll code can avoid spurious wakeups on its waiters. The problem with epoll is that the callback-based wakeups do not, ATM, carry any information about the events the wakeup is related to. So the only choice epoll has (not being able to call f_op->poll() from inside the callback), is to add the file* to a ready-list and resolve the real events later on, at epoll_wait() (or its own f_op->poll()) time. This can cause spurious wakeups, since the wake_up() itself might be for an event the caller is not interested into. The rate of these spurious wakeup can be pretty high in case of many network sockets being monitored. By allowing devices to report the events the wakeups refer to (at least the two major classes - POLLIN/POLLOUT), we are able to spare useless wakeups by proper handling inside the epoll's poll callback. Epoll will have in any case to call f_op->poll() on the file* later on, since the change to be done in order to have the full event set sent via wakeup, is too invasive for the way our f_op->poll() system works (the full event set is calculated inside the poll function - there are too many of them to even start thinking the change - also poll/select would need change too). Epoll is changed in a way that both devices which send event hints, and the ones that don't, are correctly handled. The former will gain some efficiency though. As a general rule for devices, would be to add an event mask by using key-aware wakeup macros, when making up poll wait queues. I tested it (together with the epoll's poll fix patch Andrew has in -mm) and wakeups for the supported devices are correctly filtered. Test program available here: http://www.xmailserver.org/epoll_test.c This patch: Nothing revolutionary here. Just using the available "key" that our wakeup core already support. The __wake_up_locked_key() was no brainer, since both __wake_up_locked() and __wake_up_locked_key() are thin wrappers around __wake_up_common(). The __wake_up_sync() function had a body, so the choice was between borrowing the body for __wake_up_sync_key() and calling it from __wake_up_sync(), or make an inline and calling it from both. I chose the former since in most archs it all resolves to "mov $0, REG; jmp ADDR". Signed-off-by:
-
Davide Libenzi authored
People started using eventfd in a semaphore-like way where before they were using pipes. That is, counter-based resource access. Where a "wait()" returns immediately by decrementing the counter by one, if counter is greater than zero. Otherwise will wait. And where a "post(count)" will add count to the counter releasing the appropriate amount of waiters. If eventfd the "post" (write) part is fine, while the "wait" (read) does not dequeue 1, but the whole counter value. The problem with eventfd is that a read() on the fd returns and wipes the whole counter, making the use of it as semaphore a little bit more cumbersome. You can do a read() followed by a write() of COUNTER-1, but IMO it's pretty easy and cheap to make this work w/out extra steps. This patch introduces a new eventfd flag that tells eventfd to only dequeue 1 from the counter, allowing simple read/write to make it behave like a semaphore. Simple test here: http://www.xmailserver.org/eventfd-sem.c To be back-compatible with earlier kernels, userspace applications should probe for the availability of this feature via #ifdef EFD_SEMAPHORE fd = eventfd2 (CNT, EFD_SEMAPHORE); if (fd == -1 && errno == EINVAL) <fallback> #else <fallback> #endif Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
Tony Battersby authored
eventpoll.c uses void * in one place for no obvious reason; change it to use the real type instead. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
-
Tony Battersby authored
ep_modify() doesn't need to set event.data from within the ep->lock spinlock as the comment suggests. The only place event.data is used is ep_send_events_proc(), and this is protected by ep->mtx instead of ep->lock. Also update the comment for mutex_lock() at the top of ep_scan_ready_list(), which mentions epoll_ctl(EPOLL_CTL_DEL) but not epoll_ctl(EPOLL_CTL_MOD). ep_modify() can also use spin_lock_irq() instead of spin_lock_irqsave(). Signed-off-by:
-
Tony Battersby authored
xchg in ep_unregister_pollwait() is unnecessary because it is protected by either epmutex or ep->mtx (the same protection as ep_remove()). If xchg was necessary, it would be insufficient to protect against problems: if multiple concurrent calls to ep_unregister_pollwait() were possible then a second caller that returns without doing anything because nwait == 0 could return before the waitqueues are removed by the first caller, which looks like it could lead to problematic races with ep_poll_callback(). So remove xchg and add comments about the locking. Signed-off-by:
-
Tony Battersby authored
If epoll_wait returns -EFAULT, the event that was being returned when the fault was encountered will be forgotten. This is not a big deal since EFAULT will happen only if a buggy userspace program passes in a bad address, in which case what happens later usually doesn't matter. However, it is easy to remember the event for later, and this patch makes a simple change to do that. Signed-off-by:
-
Tony Battersby authored
ep_call_nested() (formerly ep_poll_safewake()) uses "current" (without dereferencing it) to detect callback recursion, but it may be called from irq context where the use of current is generally discouraged. It would be better to use get_cpu() and put_cpu() to detect the callback recursion. Signed-off-by:
-
Davide Libenzi authored
Remove debugging code from epoll. There's no need for it to be included into mainline code. Signed-off-by:
-
Davide Libenzi authored
Signed-off-by:
-
Davide Libenzi authored
Fix a bug inside the epoll's f_op->poll() code, that returns POLLIN even though there are no actual ready monitored fds. The bug shows up if you add an epoll fd inside another fd container (poll, select, epoll). The problem is that callback-based wake ups used by epoll does not carry (patches will follow, to fix this) any information about the events that actually happened. So the callback code, since it can't call the file* ->poll() inside the callback, chains the file* into a ready-list. So, suppose you added an fd with EPOLLOUT only, and some data shows up on the fd, the file* mapped by the fd will be added into the ready-list (via wakeup callback). During normal epoll_wait() use, this condition is sorted out at the time we're actually able to call the file*'s f_op->poll(). Inside the old epoll's f_op->poll() though, only a quick check !list_empty(ready-list) was performed, and this could have led to reporting POLLIN even though no ready fds would show up at a following epoll_wait(). In order to correctly report the ready status for an epoll fd, the ready-list must be checked to see if any really available fd+event would be ready in a following epoll_wait(). Operation (calling f_op->poll() from inside f_op->poll()) that, like wake ups, must be handled with care because of the fact that epoll fds can be added to other epoll fds. Test code: /* * epoll_test by Davide Libenzi (Simple code to test epoll internals) * Copyright (C) 2008 Davide Libenzi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Davide Libenzi <davidel@xmailserver.org> * */ #include <sys/types.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <errno.h> #include <signal.h> #include <limits.h> #include <poll.h> #include <sys/epoll.h> #include <sys/wait.h> #define EPWAIT_TIMEO (1 * 1000) #ifndef POLLRDHUP #define POLLRDHUP 0x2000 #endif #define EPOLL_MAX_CHAIN 100L #define EPOLL_TF_LOOP (1 << 0) struct epoll_test_cfg { long size; long flags; }; static int xepoll_create(int n) { int epfd; if ((epfd = epoll_create(n)) == -1) { perror("epoll_create"); exit(2); } return epfd; } static void xepoll_ctl(int epfd, int cmd, int fd, struct epoll_event *evt) { if (epoll_ctl(epfd, cmd, fd, evt) < 0) { perror("epoll_ctl"); exit(3); } } static void xpipe(int *fds) { if (pipe(fds)) { perror("pipe"); exit(4); } } static pid_t xfork(void) { pid_t pid; if ((pid = fork()) == (pid_t) -1) { perror("pipe"); exit(5); } return pid; } static int run_forked_proc(int (*proc)(void *), void *data) { int status; pid_t pid; if ((pid = xfork()) == 0) exit((*proc)(data)); if (waitpid(pid, &status, 0) != pid) { perror("waitpid"); return -1; } return WIFEXITED(status) ? WEXITSTATUS(status): -2; } static int check_events(int fd, int timeo) { struct pollfd pfd; fprintf(stdout, "Checking events for fd %d\n", fd); memset(&pfd, 0, sizeof(pfd)); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; if (poll(&pfd, 1, timeo) < 0) { perror("poll()"); return 0; } if (pfd.revents & POLLIN) fprintf(stdout, "\tPOLLIN\n"); if (pfd.revents & POLLOUT) fprintf(stdout, "\tPOLLOUT\n"); if (pfd.revents & POLLERR) fprintf(stdout, "\tPOLLERR\n"); if (pfd.revents & POLLHUP) fprintf(stdout, "\tPOLLHUP\n"); if (pfd.revents & POLLRDHUP) fprintf(stdout, "\tPOLLRDHUP\n"); return pfd.revents; } static int epoll_test_tty(void *data) { int epfd, ifd = fileno(stdin), res; struct epoll_event evt; if (check_events(ifd, 0) != POLLOUT) { fprintf(stderr, "Something is cooking on STDIN (%d)\n", ifd); return 1; } epfd = xepoll_create(1); fprintf(stdout, "Created epoll fd (%d)\n", epfd); memset(&evt, 0, sizeof(evt)); evt.events = EPOLLIN; xepoll_ctl(epfd, EPOLL_CTL_ADD, ifd, &evt); if (check_events(epfd, 0) & POLLIN) { res = epoll_wait(epfd, &evt, 1, 0); if (res == 0) { fprintf(stderr, "Epoll fd (%d) is ready when it shouldn't!\n", epfd); return 2; } } return 0; } static int epoll_wakeup_chain(void *data) { struct epoll_test_cfg *tcfg = data; int i, res, epfd, bfd, nfd, pfds[2]; pid_t pid; struct epoll_event evt; memset(&evt, 0, sizeof(evt)); evt.events = EPOLLIN; epfd = bfd = xepoll_create(1); for (i = 0; i < tcfg->size; i++) { nfd = xepoll_create(1); xepoll_ctl(bfd, EPOLL_CTL_ADD, nfd, &evt); bfd = nfd; } xpipe(pfds); if (tcfg->flags & EPOLL_TF_LOOP) { xepoll_ctl(bfd, EPOLL_CTL_ADD, epfd, &evt); /* * If we're testing for loop, we want that the wakeup * triggered by the write to the pipe done in the child * process, triggers a fake event. So we add the pipe * read size with EPOLLOUT events. This will trigger * an addition to the ready-list, but no real events * will be there. The the epoll kernel code will proceed * in calling f_op->poll() of the epfd, triggering the * loop we want to test. */ evt.events = EPOLLOUT; } xepoll_ctl(bfd, EPOLL_CTL_ADD, pfds[0], &evt); /* * The pipe write must come after the poll(2) call inside * check_events(). This tests the nested wakeup code in * fs/eventpoll.c:ep_poll_safewake() * By having the check_events() (hence poll(2)) happens first, * we have poll wait queue filled up, and the write(2) in the * child will trigger the wakeup chain. */ if ((pid = xfork()) == 0) { sleep(1); write(pfds[1], "w", 1); exit(0); } res = check_events(epfd, 2000) & POLLIN; if (waitpid(pid, NULL, 0) != pid) { perror("waitpid"); return -1; } return res; } static int epoll_poll_chain(void *data) { struct epoll_test_cfg *tcfg = data; int i, res, epfd, bfd, nfd, pfds[2]; pid_t pid; struct epoll_event evt; memset(&evt, 0, sizeof(evt)); evt.events = EPOLLIN; epfd = bfd = xepoll_create(1); for (i = 0; i < tcfg->size; i++) { nfd = xepoll_create(1); xepoll_ctl(bfd, EPOLL_CTL_ADD, nfd, &evt); bfd = nfd; } xpipe(pfds); if (tcfg->flags & EPOLL_TF_LOOP) { xepoll_ctl(bfd, EPOLL_CTL_ADD, epfd, &evt); /* * If we're testing for loop, we want that the wakeup * triggered by the write to the pipe done in the child * process, triggers a fake event. So we add the pipe * read size with EPOLLOUT events. This will trigger * an addition to the ready-list, but no real events * will be there. The the epoll kernel code will proceed * in calling f_op->poll() of the epfd, triggering the * loop we want to test. */ evt.events = EPOLLOUT; } xepoll_ctl(bfd, EPOLL_CTL_ADD, pfds[0], &evt); /* * The pipe write mush come before the poll(2) call inside * check_events(). This tests the nested f_op->poll calls code in * fs/eventpoll.c:ep_eventpoll_poll() * By having the pipe write(2) happen first, we make the kernel * epoll code to load the ready lists, and the following poll(2) * done inside check_events() will test nested poll code in * ep_eventpoll_poll(). */ if ((pid = xfork()) == 0) { write(pfds[1], "w", 1); exit(0); } sleep(1); res = check_events(epfd, 1000) & POLLIN; if (waitpid(pid, NULL, 0) != pid) { perror("waitpid"); return -1; } return res; } int main(int ac, char **av) { int error; struct epoll_test_cfg tcfg; fprintf(stdout, "\n********** Testing TTY events\n"); error = run_forked_proc(epoll_test_tty, NULL); fprintf(stdout, error == 0 ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = 3; tcfg.flags = 0; fprintf(stdout, "\n********** Testing short wakeup chain\n"); error = run_forked_proc(epoll_wakeup_chain, &tcfg); fprintf(stdout, error == POLLIN ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = EPOLL_MAX_CHAIN; tcfg.flags = 0; fprintf(stdout, "\n********** Testing long wakeup chain (HOLD ON)\n"); error = run_forked_proc(epoll_wakeup_chain, &tcfg); fprintf(stdout, error == 0 ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = 3; tcfg.flags = 0; fprintf(stdout, "\n********** Testing short poll chain\n"); error = run_forked_proc(epoll_poll_chain, &tcfg); fprintf(stdout, error == POLLIN ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = EPOLL_MAX_CHAIN; tcfg.flags = 0; fprintf(stdout, "\n********** Testing long poll chain (HOLD ON)\n"); error = run_forked_proc(epoll_poll_chain, &tcfg); fprintf(stdout, error == 0 ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = 3; tcfg.flags = EPOLL_TF_LOOP; fprintf(stdout, "\n********** Testing loopy wakeup chain (HOLD ON)\n"); error = run_forked_proc(epoll_wakeup_chain, &tcfg); fprintf(stdout, error == 0 ? "********** OK\n": "********** FAIL (%d)\n", error); tcfg.size = 3; tcfg.flags = EPOLL_TF_LOOP; fprintf(stdout, "\n********** Testing loopy poll chain (HOLD ON)\n"); error = run_forked_proc(epoll_poll_chain, &tcfg); fprintf(stdout, error == 0 ? "********** OK\n": "********** FAIL (%d)\n", error); return 0; } Signed-off-by: -
Daniel Mack authored
Add a driver for Intersil's ISL29003 ambient light sensor device plus some documentation. Inspired by tsl2550.c, a driver for a similar device. It is put in drivers/misc for now until the industrial I/O framework gets merged. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
