- 25 Jan, 2013 4 commits
-
-
Yi Zhang authored
1) add clk_enable/disable in serial_pxa_console_write() 2) add clk_prepare() to follow common clock driver Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang Li authored
When PCH_UART_CONSOLE and SERIAL_CORE_CONSOLE is not set neither, the uart_port will have no 'sysrq' member hence their will need a '#ifdef' in pch_uart.c to handle the case, otherwise we'll see compile error like this: CC [M] drivers/tty/serial/pch_uart.o drivers/tty/serial/pch_uart.c: In function 'pch_uart_hal_read': drivers/tty/serial/pch_uart.c:572:11: error: 'struct uart_port' has no member named 'sysrq' make[4]: *** [drivers/tty/serial/pch_uart.o] Error 1 Reported-by: Randy Dunlap <rdunlap@infradead.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Liang Li <liang.li@windriver.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Karthik Manamcheri authored
When the tty input buffer is full and thereby throttled, flushing/resetting the read buffer should unthrottle to allow more data to be received. Signed-off-by: Karthik Manamcheri <Karthik.Manamcheri@ni.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Cox authored
Sorry forgot to merge this in the original submission. Resync with the tty tree changes moving the buffers into the tty_port Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 Jan, 2013 2 commits
-
-
Michal Simek authored
__exit_p() need to be removed after the __devexit removal from the driver. Warning log: drivers/tty/serial/xilinx_uartps.c:996:12: warning: 'xuartps_remove' defined but not used [-Wunused-function] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
channing authored
There is no need to memset 0 to SPI frame memory before preparing transfer frame bits, because SPI frame header are encoded with valid data size, so don't need to worry about adopting dirty bits, more, memset zero for each SPI frame may impact the spi throughput efficiency. Signed-off-by: Chen Jun <jun.d.chen@intel.com> Signed-off-by: channing <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 Jan, 2013 7 commits
-
-
Arve Hjønnevåg authored
This provides a console driver for the Goldfish virtual platform. The original is from Arve with changes from Jun Nakajima and Tom Keel. This has been then been ported to the current kernel and to the tty port mechanism by Alan Cox. In the process it gained proper POSIX semantics and vhangup works. The default name is not ttyS as this belongs to the 8250 driver. Instead ttyGFx is now used. In the normal usage case the first port serves as a kernel logging console and the second one carries various other data streams for the emulation. Signed-off-by: Arve Hjønnevåg <arve@google.com> [Cleaned up to handle x86] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [Moved to 3.7 and chunks rewritten to use tty_port layer] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shiyan authored
This struct is used only for driver, so it should be static. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shiyan authored
This patch adds a hardware reset the break and overflow bits for these events. Without resetting the bits they will be reported to the core every time, when once occur. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
The non-dt probing allowed passing the location via platform data from the beginning. So make up leeway for device tree probing. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josh Cartwright authored
Add support for specifying clock information for the uart clk via the device tree. This eliminates the need to hardcode rates in the device tree. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang Li authored
When send break to the uart port, we always get 'frame error', but we can not just reset receive fifo in such case, otherwise the sysrq cmd will not be received correctly. When we handle sysrq output via pch_console_write, the priv lock has already been taken so no need to take the lock in pch_console_write. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang Li authored
When we use pch_uart as system console like 'console=ttyPCH0,115200', then 'send break' to it. We'll encounter the deadlock on a cpu/core, with interrupts disabled on the core. When we happen to have all irqs affinity to cpu0 then the deadlock on cpu0 actually deadlock whole system. In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags) then call pch_uart_err_ir when break is received. Then the call to dev_err would actually call to pch_console_write then we'll run into another spin_lock(&priv->lock), with interrupts disabled. So in the call sequence lead by pch_uart_interrupt, we should be carefully to call functions that will 'print message to console' only in case the uart port is not being used as serial console. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 Jan, 2013 2 commits
-
-
Ilya Zykov authored
The root of problem is carelessly zeroing pointer(in function __tty_buffer_flush()), when another thread can use it. It can be cause of "NULL pointer dereference". Main idea of the patch, this is never free last (struct tty_buffer) in the active buffer. Only flush the data for ldisc(buf->head->read = buf->head->commit). At that moment driver can collect(write) data in buffer without conflict. It is repeat behavior of flush_to_ldisc(), only without feeding data to ldisc. Also revert: commit c56a00a1 tty: hold lock across tty buffer finding and buffer filling In order to delete the unneeded locks any more. Signed-off-by: Ilya Zykov <ilya@ilyx.ru> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen Gang authored
The fields must be null-terminated, or next printk for %s, will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 Jan, 2013 3 commits
-
-
Joe Millenbach authored
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilya Zykov authored
Regression 'tty: fix "IRQ45: nobody cared"' Regression commit 7b292b4b Function reset_buffer_flags() also invoked during the ioctl(...,TCFLSH,..). At the time of request we can have full buffers and throttled driver too. If we don't unthrottle driver, we can get forever throttled driver, because, after request, we will have empty buffers and throttled driver and there is no place to unthrottle driver. It simple reproduce with "pty" pair then one side sleep on tty->write_wait, and other side do ioctl(...,TCFLSH,..). Then there is no place to do writers wake up. Signed-off-by: Ilya Zykov <ilya@ilyx.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thierry Reding authored
A duplicate definition of the port variable was introduced in the interrupt handler, which causes the build to break. The fix is to rename the variable to tport, which is already properly used in subsequent code. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 Jan, 2013 15 commits
-
-
Tony Prisk authored
Convert the last memory allocation (vt8500_port) to use devm_kzalloc and remove the fail path cleanup code from vt8500_serial_probe. Reorder iomem mapping above clk_enable to simplify fail code. The clock is only enabled if all other resources are available. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Prisk authored
UART modules on Wondermedia SoCs are connected via a gated clock source, rather than directly to the 24Mhz reference clock. While uboot enables UART0 for debugging, other UART ports are unavailable until the clock is enabled. This patch checks that a valid clock is actually passed from devicetree, enables the clock in probe. This change removes the fallback when a clock was not specified as it doesn't apply any longer (and would only work if the UART clock was already enabled). DTSI files are updated for VT8500, WM8505 and WM8650. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thierry Reding authored
Many of the tty functions were converted to use a struct tty_port instead of a struct tty_struct. Update the Tegra driver accordingly to avoid build breakage. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
Commit 2e124b4a (TTY: switch tty_flip_buffer_push) introduced the following build warning: drivers/tty/serial/imx.c:519:21: warning: unused variable 'tty' [-Wunused-variable] Remove the unused 'tty' variable. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Haojun Bao authored
The write() function could be used by printk(), which is atomic and tweaking clock there can cause "BUG: sleeping function called from invalid context". Signed-off-by: Bao Haojun <hjbao@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shiyan authored
This patch fix possible kernel crash if no platform data supplied. We should not use platform data in this case, instead we will use default values from private driver structure. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Cernekee authored
This driver supports the RocketPort EXPRESS and RocketPort INFINITY families of PCI/PCIe multiport serial adapters. These adapters use a "RocketPort 2" ASIC that is not compatible with the original RocketPort driver (CONFIG_ROCKETPORT). Tested with the RocketPort EXPRESS Octa DB9 and Quad DB9. Also added an old RocketPort 8J PCI card to the same system to verify that rocket.c and rp2.c coexist peacefully. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Cernekee authored
Matching PCI_ANY_ID causes conflicts with RocketPort 2 adapters, which are supported by a different driver. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Prisk authored
Memory mapped via ioremap call is never released. Rather than add an iounmap call, change allocation function to devm_request_and_ioremap. Also, change the error on failure for this call to -EADDRNOTAVAIL rather than -ENOMEM. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Prisk authored
Fix two instances where the index to vt8500_uart_ports is tested against > VT8500_MAX_PORTS. Correct usage should be >= VT8500_MAX_PORTS. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cong Ding authored
The pointer tty is dereferened in line 3135, so it is not necessary to check null again in line 3140. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cong Ding authored
The pointer info is dereferened in line 1009, so it is not necessary to check null again in line 1012. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Pelykh authored
Original table in OMAP TRM named "UART Mode Baud Rates, Divisor Values, and Error Rates" determines modes not for all common baud rates. E.g. for 1000000 baud rate mode should be 16x, but according to that table it's determined as 13x. According to current implementation of mode divisor selection, after requesting 1000000 baudrate from driver, later one will configure chip to use MODE13 divisor. Assuming 48Mhz as common UART clock speed, MODE13 divisor will effectively give 1230769 baudrate, what is quite far from desired 1000000 baudrate. While with MODE16 divisor, chip will produce exact 1000000 baudrate. In old driver that served UART devices (8250.c and serial_core.c) this divisor could have been configured by user-space program, but in omap_serial.c driver implementation this ability was not implemented (afaik, by design) thus disallowing proper usage of MODE16-compatible baudrates. Signed-off-by: Alexey Pelykh <alexey.pelykh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
Commit "serial/arc-uart: split probe from probe_earlyprintk" introduced a build time warning: "WARNING: vmlinux.o(.data+0x5baa0): Section mismatch in reference from the variable early_arc_platform_driver to the function .init.text:arc_serial_probe_earlyprintk()" While at it - fixed another incorrectly placed initdata annotation. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: fengguang.wu@intel.com Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Barry Song authored
The fast lookup table to set baudrate is only right when ioclk is 150MHz. for most platforms, ioclk is 150MHz, but some boards might set ioclk to other frequency. so re-calc the clk_div_reg when ioclk is not 150MHz. this patch also gets clk in probe and puts it in remove. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Jan, 2013 7 commits
-
-
Greg Kroah-Hartman authored
It isn't using the port logic, and breaks the build at the moment, so mark it BROKEN. Cc: Jiri Slaby <jslaby@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
By the recent `switch flipping' patches we introduced a build failure in the driver: mn10300-serial.c:527:19: error: 'port' redeclared as different kind of symbol I did not notice because I did not even find a compiler for that new architecture. Hopefully everything is all right now as I cannot test it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
This one was omitted by the "TTY: switch tty_flip_buffer_push" patch because I did not compile-test mips driver. Now I do. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
The default burst is often 1 byte which is not very optimal. The ideal burst size when using 16550A type port would be 1/2 of fifosize, but this does not work with all Designware implementations. Setting it to 1/4 fifosize. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
There are no stubs for ACPI functions so the driver needs to have this ifdef or it will not compile without ACPI. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
Remove one useless wakeup, and do not use DMA with zero byte transfers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
The tty buffer functions are converted to using tty_port structure instead of struct tty, so we must do the same. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-