1. 14 Apr, 2003 20 commits
    • Martin Schwidefsky's avatar
      [PATCH] s390/s390x unification (2/7) · 9491d77e
      Martin Schwidefsky authored
      Merge s390x and s390 to one architecture.
      9491d77e
    • Martin Schwidefsky's avatar
      [PATCH] s390/s390x unification (1/7) · a922abe4
      Martin Schwidefsky authored
      Merge s390x and s390 to one architecture.
      a922abe4
    • Martin Schwidefsky's avatar
      [PATCH] s390: dasd driver coding style (2/2) · 0bde4b78
      Martin Schwidefsky authored
      s390 dasd driver:
       - Coding style adaptions. Removed almost all typedefs from the dasd driver.
      0bde4b78
    • Martin Schwidefsky's avatar
      [PATCH] s390: dasd driver coding style (1/2) · d96d6867
      Martin Schwidefsky authored
      s390 dasd driver:
       - Coding style adaptions. Removed almost all typedefs from the dasd driver.
      d96d6867
    • Martin Schwidefsky's avatar
      [PATCH] s390: dasd driver fixes. · 616dea43
      Martin Schwidefsky authored
      s390 dasd driver fixes:
       - Take request queue lock in dasd_end_request.
       - Make it work with CONFIG_DEVFS_FS=y.
       - Properly wait for the root device.
       - Cope with requests killed due to failed channel path.
       - Improve reference counting.
       - Remove devno from struct dasd_device.
       - Remove unnecessary bdget/bdput calls.
      616dea43
    • Martin Schwidefsky's avatar
      [PATCH] s390: uni-processor builds. · db165cde
      Martin Schwidefsky authored
      Fixes for s390 kernel configured with CONFIG_SMP=n.
      db165cde
    • Martin Schwidefsky's avatar
      [PATCH] s390: console changes. · a863aaa3
      Martin Schwidefsky authored
      s390 console fixes for 3215 and sclp.
      a863aaa3
    • Martin Schwidefsky's avatar
      [PATCH] s390: common i/o layer update. · fefe4ef5
      Martin Schwidefsky authored
      Common i/o layer fixes:
       - Fix for path no operational condition in cio_start.
       - Fix handling of user interruption parameter.
       - Add code to wait for devices in init_ccw_bus_type.
       - Move qdio states out of main cio state machine.
       - Reworked chsc data structures.
       - Add ccw_device_start_timeout.
       - Handle path verification required flag.
      fefe4ef5
    • Martin Schwidefsky's avatar
      [PATCH] s390: syscall numbers > 255. · 71e25a79
      Martin Schwidefsky authored
      Add support for system calls with numbers > 255.
      71e25a79
    • Martin Schwidefsky's avatar
      [PATCH] s390: base s390 fixes. · 2e1e5016
      Martin Schwidefsky authored
      s390 fixes:
       - Initialize timing related variables first and then enable the timer interrupt.
       - Normalize nano seconds to micro seconds in do_gettimeofday.
       - Add types for __kernel_timer_t and __kernel_clockid_t.
       - Fix ugly bug in switch_to: set prev to the return value of resume, otherwise
         prev still contains the previous process at the time resume was called and
         not the previous process at the time resume returned. They differ...
       - Add missing include to get the kernel compiled.
       - Get a closer match with the i386 termios.h file.
       - Cope with INITIAL_JIFFIES.
       - Define cpu_relax to do a cpu yield on VM and LPAR.
       - Don't reenable interrupts in program check handler.
       - Add pte_file definitions.
       - Fix PT_IEEE_IP special case in ptrace.
       - Use compare and swap to release the lock in _raw_spin_unlock.
       - Introduce invoke_softirq to switch to async. interrupt stack.
      2e1e5016
    • Linus Torvalds's avatar
      Merge bk://bk.arm.linux.org.uk/linux-2.5-rmk · c3cc27c9
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      c3cc27c9
    • Russell King's avatar
      [PATCH] flush_cache_mm in zap_page_range · e0aceaae
      Russell King authored
      unmap_vmas() eventually calls tlb_start_vma(), where most architectures
      flush caches as necessary.  The flush here seems to make the
      flush_cache_range() in zap_page_range() redundant, and therefore can be
      removed.
      e0aceaae
    • Linus Torvalds's avatar
      Merge http://fbdev.bkbits.net/fbdev-2.5 · 9a72322d
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      9a72322d
    • Kai Mäkisara's avatar
      [PATCH] SCSI tape sysfs and module parameter additions · cb22f9fc
      Kai Mäkisara authored
      This contains the following changes:
       - export some driver parameters in sysfs
       - use new module parameter definitions
      cb22f9fc
    • Kai Mäkisara's avatar
      [PATCH] SCSI tape EOT write fixes · 6b38193b
      Kai Mäkisara authored
      This contains the following changes:
       - EOT detection fixed when writing in fixed block mode
       - asynchronous writes in fixed block mode and write threshold removed
         to enable the EOT fixes (the parameter accepted for compatibility)
      6b38193b
    • Kai Mäkisara's avatar
      [PATCH] SCSI tape ILI and timeout fixes · 69ca9ecd
      Kai Mäkisara authored
      This contains the following changes:
       - ILI fixed to work with really old drives
       - message printed in case block larger than read()
       - long timeout used when creating a tape partition
      69ca9ecd
    • Mikael Pettersson's avatar
      [PATCH] lapic_nmi_watchdog resume fix · d8ff1505
      Mikael Pettersson authored
      I managed to add a bug to the local APIC NMI watchdog's
      resume procedure in the driver model conversion for 2.5.67.
      The problem is that the resume procedure simply calls the
      enable procedure. If the NMI watchdog has been disabled by
      another driver (like oprofile or perfctr), then the NMI
      watchdog will incorrectly be re-enabled.
      
      I discovered this when updating the perfctr driver for 2.5.67
      and seeing unexpected NMIs after a resume from apm --suspend.
      
      We can fix this by unregistering the NMI watchdog from the
      driver model when disabling it (like the code did before the
      driver model changes), or by remembering the previous state
      at suspend and checking it at resume. The patch below uses
      the second, simpler, approach. Tested, please apply.
      d8ff1505
    • Linus Torvalds's avatar
      Merge bk://kernel.bkbits.net/davem/sparc-2.5 · ffc06ab0
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      ffc06ab0
    • Linus Torvalds's avatar
      Merge bk://kernel.bkbits.net/davem/net-2.5 · 612e744c
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      612e744c
    • James Bottomley's avatar
      fix scsi queue plugging behaviour · c2afc04e
      James Bottomley authored
      Following recent changes removing blk_queue_empty(), we were
      incorrectly plugging the queue some times (most often as part of
      the SCSI scan process).  This was causing a non-deterministic panic
      in the scan code because a destroyed queue was sometimes being
      unplugged and run.
      c2afc04e
  2. 13 Apr, 2003 15 commits
  3. 12 Apr, 2003 5 commits
    • James Simmons's avatar
      Merge kozmo.(none):/usr/src/linus-2.5 · 81ff732e
      James Simmons authored
      into kozmo.(none):/usr/src/fbdev-2.5
      81ff732e
    • Neil Brown's avatar
      [PATCH] md: Fix raid1 oops · 7b87c44e
      Neil Brown authored
      From: Angus Sawyer <angus.sawyer@dsl.pipex.com>
      
      When the last device in a raid1 array is failed (or missing) the r1bio
      structure can be released (especially on very fast devices) before
      make_request has finished using it.
      
      This patch gets and puts an extra reference to the r1_bio around the
      submission loop, and uses the status in r1_bio to maintain the request status
      if the last refernce is held by make_request.
      
      This is also more correct for write requests, as a write should succeed
      if any write succeeded, not only if the last write succceeded.
      7b87c44e
    • Neil Brown's avatar
      [PATCH] kNFSd: First step to adding state management to NFSv4 server · ef242262
      Neil Brown authored
      A new file "nfs4state.c", and nfs4_setclientid{,_confirm} are moved there,
      with lots of code.
      ef242262
    • Neil Brown's avatar
      [PATCH] kNFSd: NFSD binary compatibility breakage · 88d416db
      Neil Brown authored
      The removal of "struct nfsctl_uidmap" from "nfsctl_fdparm" broke
      binary compatiblity on 64-bit platforms (strictly speaking: on all
      platforms with alignof(void *) > alignof(int)).  The problem is that
      nfsctl_uidmap contained a "char *", which forced the alignment of the
      entire union to be 64 bits.  With the removal of the uidmap, the
      required alignment drops to 32 bits.  Since the first member is only
      32 bits in size, this breaks compatibility with user-space.  Patch
      below fixes the problem.
      88d416db
    • Neil Brown's avatar
      [PATCH] kNFSd: Return correct result for ACCESS(READ) on eXecute-only file. · 4fe13364
      Neil Brown authored
      Currently, an NFSv3 ACCESS check for READ permission on an
      eXecute-only file will succeed where it should fail.
      
      This is because nfsd_permission allows READ access to eXecute only
      files so that mode 711 executables can be loaded and run, and
      nfsd_access simply uses nfsd_permission.
      
      This patch changes nfsd_permission to only map eXecute permission to
      read permission of MAY_OWNER_OVERRIDE was set.  This is only set
      when trying to read from a file, so ACCESS will no longer be tricked.
      
      This change will only affect callers of nfsd_permission that specify
      MAY_READ and not MAY_OWNER_OVERRIDE, and nfsd_access is the only
      routine that calls nfsd_permission (via fh_verify) that way.
      4fe13364