- 29 Jun, 2018 4 commits
-
-
Peng Li authored
HW supports UDP, TCP and SCTP packets checksum for both ipv4 and ipv6, but do not support other type packets checksum for ipv4 or ipv6. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
If the hdev->vector_status[vector_id] is already HCLGE_INVALID_VPORT, should log the error and return. Signed-off-by:
-
Peng Li authored
The interface init_client_instance and uninit_client_instance do not register anything, only initialize the client instance. This patch rename the related interface to make the function name to indicate the purpose. Signed-off-by:
-
Peng Li authored
In hclge_unmap_ring_frm_vector, there are 2 steps: step 1: get vector index. step 2 unbind ring with vector. But it gets vector id again in step 2 interface. This patch removes hclge_get_vector_index from hclge_bind_ring_with_vector, and make the step the same with hns3 PF driver. Signed-off-by:
-
- 28 Jun, 2018 29 commits
-
-
David S. Miller authored
Flavio Leitner says: ==================== net: preserve sock reference when scrubbing the skb. The sock reference is lost when scrubbing the packet and that breaks TSQ (TCP Small Queues) and XPS (Transmit Packet Steering) causing performance impacts of about 50% in a single TCP stream when crossing network namespaces. XPS breaks because the queue mapping stored in the socket is not available, so another random queue might be selected when the stack needs to transmit something like a TCP ACK, or TCP Retransmissions. That causes packet re-ordering and/or performance issues. TSQ breaks because it orphans the packet while it is still in the host, so packets are queued contributing to the buffer bloat problem. Preserving the sock reference fixes both issues. The socket is orphaned anyways in the receiving path before any relevant action, but the transmit side needs some extra checking included in the first patch. The first patch will update netfilter to check if the socket netns is local before use it. The second patch removes the skb_orphan() from the skb_scrub_packet() and improve the documentation. ChangeLog: - split into two (Eric) - addressed Paolo's offline feedback to swap the checks in xt_socket.c to preserve original behavior. - improved ip-sysctl.txt (reported by Cong) ==================== Signed-off-by: -
Flavio Leitner authored
The sock reference is lost when scrubbing the packet and that breaks TSQ (TCP Small Queues) and XPS (Transmit Packet Steering) causing performance impacts of about 50% in a single TCP stream when crossing network namespaces. XPS breaks because the queue mapping stored in the socket is not available, so another random queue might be selected when the stack needs to transmit something like a TCP ACK, or TCP Retransmissions. That causes packet re-ordering and/or performance issues. TSQ breaks because it orphans the packet while it is still in the host, so packets are queued contributing to the buffer bloat problem. Preserving the sock reference fixes both issues. The socket is orphaned anyways in the receiving path before any relevant action and on TX side the netfilter checks if the reference is local before use it. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Flavio Leitner authored
Netfilter assumes that if the socket is present in the skb, then it can be used because that reference is cleaned up while the skb is crossing netns. We want to change that to preserve the socket reference in a future patch, so this is a preparation updating netfilter to check if the socket netns matches before use it. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Roman Mashak says: ==================== net sched actions: code style cleanup and fixes The patchset fixes a few code stylistic issues and typos, as well as one detected by sparse semantic checker tool. No functional changes introduced. Patch 1 & 2 fix coding style bits caught by the checkpatch.pl script Patch 3 fixes an issue with a shadowed variable Patch 4 adds sizeof() operator instead of magic number for buffer length Patch 5 fixes typos in diagnostics messages Patch 6 explicitly sets unsigned char for bitwise operation v2: - submit for net-next - added Reviewed-by tags - use u8* instead of char* as per Davide Caratti suggestion ==================== Signed-off-by: -
Roman Mashak authored
Since char can be unsigned or signed, and bitwise operators may have implementation-dependent results when performed on signed operands, declare 'u8 *' operand instead. Suggested-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Roman Mashak authored
Change "tc filter pedit .." to "tc actions pedit .." in error messages to clearly refer to pedit action. Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Roman Mashak authored
Replace constant integer with sizeof() to clearly indicate the destination buffer length in skb_header_pointer() calls. Reviewed-by:
-
Roman Mashak authored
The variable _data in include/asm-generic/sections.h defines sections, this causes sparse warning in pedit: net/sched/act_pedit.c:293:35: warning: symbol '_data' shadows an earlier one ./include/asm-generic/sections.h:36:13: originally declared here Therefore rename the variable. Reviewed-by:
-
Roman Mashak authored
Fix coding style issues in tc pedit headers detected by the checkpatch script. Reviewed-by:
-
Roman Mashak authored
Fix coding style issues in tc pedit action detected by the checkpatch script. Reviewed-by:
-
Yousuk Seung authored
Extend slotting with support for non-uniform distributions. This is similar to netem's non-uniform distribution delay feature. Commit f043efeae2f1 ("netem: support delivering packets in delayed time slots") added the slotting feature to approximate the behaviors of media with packet aggregation but only supported a uniform distribution for delays between transmission attempts. Tests with TCP BBR with emulated wifi links with non-uniform distributions produced more useful results. Syntax: slot dist DISTRIBUTION DELAY JITTER [packets MAX_PACKETS] \ [bytes MAX_BYTES] The syntax and use of the distribution table is the same as in the non-uniform distribution delay feature. A file DISTRIBUTION must be present in TC_LIB_DIR (e.g. /usr/lib/tc) containing numbers scaled by NETEM_DIST_SCALE. A random value x is selected from the table and it takes DELAY + ( x * JITTER ) as delay. Correlation between values is not supported. Examples: Normal distribution delay with mean = 800us and stdev = 100us. > tc qdisc add dev eth0 root netem slot dist normal 800us 100us Optionally set the max slot size in bytes and/or packets. > tc qdisc add dev eth0 root netem slot dist normal 800us 100us \ bytes 64k packets 42 Signed-off-by:Yousuk Seung <ysseung@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
David Ahern authored
Have one extack message for parsing and validating. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Brandon Maier authored
We're ignoring the result of the attached phy device's read_status(). Return it so we can detect errors. Signed-off-by:
Brandon Maier <brandon.maier@rockwellcollins.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Brandon Maier authored
The xgmiitorgmii is using the mii_bus of the device it's attached to, instead of the bus it was given during probe. Signed-off-by:
-
Brandon Maier authored
Since a phy_device is added to the global mdio_bus list during phy_device_register(), but a phy_device's phy_driver doesn't get attached until phy_probe(). It's possible of_phy_find_device() in xgmiitorgmii will return a valid phy with a NULL phy_driver. Leading to a NULL pointer access during the memcpy(). Fixes this Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40 #1 Hardware name: Xilinx Zynq Platform task: ce4c8d00 task.stack: ce4ca000 PC is at memcpy+0x48/0x330 LR is at xgmiitorgmii_probe+0x90/0xe8 pc : [<c074bc68>] lr : [<c0529548>] psr: 20000013 sp : ce4cbb54 ip : 00000000 fp : ce4cbb8c r10: 00000000 r9 : 00000000 r8 : c0c49178 r7 : 00000000 r6 : cdc14718 r5 : ce762800 r4 : cdc14710 r3 : 00000000 r2 : 00000054 r1 : 00000000 r0 : cdc14718 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xce4ca210) ... [<c074bc68>] (memcpy) from [<c0529548>] (xgmiitorgmii_probe+0x90/0xe8) [<c0529548>] (xgmiitorgmii_probe) from [<c0526a94>] (mdio_probe+0x28/0x34) [<c0526a94>] (mdio_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414) [<c04db98c>] (driver_probe_device) from [<c04dbd58>] (__device_attach_driver+0xac/0x10c) [<c04dbd58>] (__device_attach_driver) from [<c04d96f4>] (bus_for_each_drv+0x84/0xc8) [<c04d96f4>] (bus_for_each_drv) from [<c04db5bc>] (__device_attach+0xd0/0x134) [<c04db5bc>] (__device_attach) from [<c04dbdd4>] (device_initial_probe+0x1c/0x20) [<c04dbdd4>] (device_initial_probe) from [<c04da8fc>] (bus_probe_device+0x98/0xa0) [<c04da8fc>] (bus_probe_device) from [<c04d8660>] (device_add+0x43c/0x5d0) [<c04d8660>] (device_add) from [<c0526cb8>] (mdio_device_register+0x34/0x80) [<c0526cb8>] (mdio_device_register) from [<c0580b48>] (of_mdiobus_register+0x170/0x30c) [<c0580b48>] (of_mdiobus_register) from [<c05349c4>] (macb_probe+0x710/0xc00) [<c05349c4>] (macb_probe) from [<c04dd700>] (platform_drv_probe+0x44/0x80) [<c04dd700>] (platform_drv_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414) [<c04db98c>] (driver_probe_device) from [<c04dbc58>] (__driver_attach+0x10c/0x118) [<c04dbc58>] (__driver_attach) from [<c04d9600>] (bus_for_each_dev+0x8c/0xd0) [<c04d9600>] (bus_for_each_dev) from [<c04db1fc>] (driver_attach+0x2c/0x30) [<c04db1fc>] (driver_attach) from [<c04daa98>] (bus_add_driver+0x50/0x260) [<c04daa98>] (bus_add_driver) from [<c04dc440>] (driver_register+0x88/0x108) [<c04dc440>] (driver_register) from [<c04dd6b4>] (__platform_driver_register+0x50/0x58) [<c04dd6b4>] (__platform_driver_register) from [<c0b31248>] (macb_driver_init+0x24/0x28) [<c0b31248>] (macb_driver_init) from [<c010203c>] (do_one_initcall+0x60/0x1a4) [<c010203c>] (do_one_initcall) from [<c0b00f78>] (kernel_init_freeable+0x15c/0x1f8) [<c0b00f78>] (kernel_init_freeable) from [<c0763d10>] (kernel_init+0x18/0x124) [<c0763d10>] (kernel_init) from [<c0112d74>] (ret_from_fork+0x14/0x20) Code: ba000002 f5d1f03c f5d1f05c f5d1f07c (e8b151f8) ---[ end trace 3e4ec21905820a1f ]--- Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== Updates for ipsec selftests Fix up the existing ipsec selftest and add tests for the ipsec offload driver API. v2: addressed formatting nits in netdevsim from Jakub Kicinski v3: a couple more nits from Jakub ==================== Signed-off-by: -
Shannon Nelson authored
Using the netdevsim as a device for testing, try out the XFRM commands for setting up IPsec hardware offloads. Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Shannon Nelson authored
Implement the IPsec/XFRM offload API for testing. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Shannon Nelson authored
We really shouldn't mess with local system settings, so let's use the already created dummy device instead for ipsec testing. Oh, and let's put the temp file into a proper directory. Signed-off-by:
-
Shannon Nelson authored
Following the custom from the other functions, clear the global ret code before starting the test so as to not have previously failed tests cause us to thing this test has failed. Reported-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Guillaume Nault authored
'sockaddr_len' is checked against various values when entering pppol2tp_connect(), to verify its validity. It is used again later, to find out which sockaddr structure was passed from user space. This patch combines these two operations into one new function in order to simplify pppol2tp_connect(). A new structure, l2tp_connect_info, is used to pass sockaddr data back to pppol2tp_connect(), to avoid passing too many parameters to l2tp_sockaddr_get_info(). Also, the first parameter is void* in order to avoid casting between all sockaddr_* structures manually. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
-
Sergei Shtylyov authored
The *enum* {A|M}PR_BIT were declared in the commit 86a74ff2 ("net: sh_eth: add support for Renesas SuperH Ethernet") adding SH771x support, however the SH771x manual doesn't have the APR/MPR registers described and the code writing to them for SH7710 was later removed by the commit 380af9e3 ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data""). All the newer SoC manuals have these registers documented as having a 16-bit TIME parameter of the PAUSE frame, not 1-bit -- update the *enum* accordingly, fixing up the APR/MPR writes... Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Keara Leibovitz authored
Added an extreme-case test for all 7 csum action headers. Signed-off-by:
Keara Leibovitz <kleib@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Alexandre Belloni says: ==================== net: mscc: ocelot: add more features This series adds link aggregation and VLAN filtering hardware offload support to the ocelot driver. PTP support will be sent later. changes in v2: - rebased on v4.18-rc1 - check for aggregation type and only offload it when type is hash (balance-xor or 802.3ad) ==================== Signed-off-by: -
Antoine Tenart authored
Add hardware VLAN filtering offloading on ocelot. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
Add link aggregation hardware offload support for Ocelot. ocelot_get_link_ksettings() is not great but it does work until the driver is reworked to switch to phylink. Signed-off-by:
-
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Casey Leedom authored
Add flag tc_flower_initialized to indicate the completion if tc flower initialization. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
- 27 Jun, 2018 7 commits
-
-
Roopa Prabhu authored
In systems where neigh gc thresh holds are set to high values, admin deleted neigh entries (eg ip neigh flush or ip neigh del) can linger around in NUD_FAILED state for a long time until periodic gc kicks in. This patch forces neigh_invalidate when NUD_FAILED neigh_update is from an admin. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== Multipath tests for tunnel devices This patchset adds a test for ECMP and weighted ECMP between two GRE tunnels. In patches #1 and #2, the function multipath_eval() is first moved from router_multipath.sh to lib.sh for ease of reuse, and then fixed up. In patch #3, the function tc_rule_stats_get() is parameterized to be useful for egress rules as well. In patch #4, a new function __simple_if_init() is extracted from simple_if_init(). This covers the logic that needs to be done for the usual interface: VRF migration, upping and installation of IP addresses. Patch #5 then adds the test itself. Additionally in patch #6, a requirement to add diagrams to selftests is documented. ==================== Signed-off-by: -
Petr Machata authored
ASCII art diagrams are well suited for presenting the topology that a test uses while being easy to embed directly in the test file iteslf. They make the information very easy to grasp even for simple topologies, and for more complex ones they are almost essential, as figuring out the interconnects from the script itself proves to be difficult. Therefore state the requirement for topology ASCII art in README. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Add a GRE-tunneling test such that there are two tunnels involved, with a multipath route listing both as next hops. Similarly to router_multipath.sh, test that the distribution of traffic to the tunnels honors the configured weights. Signed-off-by:
-
Petr Machata authored
The function simple_if_init() does two things: it creates a VRF, then moves an interface into this VRF and configures addresses. The latter comes in handy when adding more interfaces into a VRF later on. The situation is similar for simple_if_fini(). Therefore split the interface remastering and address de/initialization logic to a new pair of helpers __simple_if_init() / __simple_if_fini(), and defer to these helpers from simple_if_init() and simple_if_fini(). Signed-off-by:
-
Petr Machata authored
The GRE multipath tests need stats on an egress counter. Change tc_rule_stats_get() to take direction as an optional argument, with default of ingress. Take the opportunity to change line continuation character from | to \. Move the | to the next line, which indent. Signed-off-by:
-
Petr Machata authored
- Change the indentation of the function body from 7 spaces to one tab. - Move initialization of weights_ratio up so that it can be referenced from the error message about packet difference being zero. - Move |'s consistently to continuation line, which reindent. Signed-off-by:
-
