As data transfer may starts immediately after i2c eeprom init
completed. Thus i2c eeprom should be initialized after SMU
ready. And i2c data transfer should be prohibited when SMU
down. That is the i2c eeprom fini sequence needs to be
updated also.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To fit the latest SMC firmware 42.53 and eliminate the
warning on driver loading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It can support different NV1x ASIC better. And this can guard
no member got missing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.

Fixes: 487eca11 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The variable dp_ref_clk_khz is being initialized with a value that is
never read and it is being updated later with a new value.  The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following gcc warning:

drivers/gpu/drm/radeon/ci_dpm.c:82:36: warning: ‘defaults_saturn_pro’
defined but not used [-Wunused-const-variable=]
 static const struct ci_pt_defaults defaults_saturn_pro =
                                    ^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:68:36: warning: ‘defaults_bonaire_pro’
defined but not used [-Wunused-const-variable=]
 static const struct ci_pt_defaults defaults_bonaire_pro =
                                    ^~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following gcc warning:

drivers/gpu/drm/radeon/si_dpm.c:255:33: warning: ‘dte_data_tahiti_le’
defined but not used [-Wunused-const-variable=]
 static const struct si_dte_data dte_data_tahiti_le =
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This code is dead, let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Let format prefixes take care of printing the module name
through pr_fmt and dev_fmt definitions.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Define dev_fmt macro for informative print messages
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu uses lots of pr_* calls for printing error messages.
With this prefix, errors shall be more obvious to the end
use regarding its origin, and may help debugging.

Prefix format:

[xxx.xxxxx] amdgpu: ...
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following gcc warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_hw_sequencer.c:43:46:
warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=]
 static const struct dce80_hw_seq_reg_offsets reg_offsets[] = {
                                              ^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set up a GPU scheduler based on the ring flag rather
than the ring type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We don't want a GPU scheduler for this ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This allows IPs to flag whether a specific ring requires
a GPU scheduler or not.  E.g., sometimes instances of an
IP are asymmetric and have different capabilities.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Get SMC fw size before backdoor loading instead of giving an
certain value, as it may different for different ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Vram lost counter is wrongly increased by two during baco reset.

V2: assumed vram lost for mode1 reset on all ASICs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prefix RAS message printing in GFX IP with PCI device info,
which assists the debug in multiple GPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If there is no GPU hang, user still can access
debugfs through kiq.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Monk Liu <Monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prefix ras related kernel message logging with PCI
device info by replacing DRM_INFO/WARN/ERROR with
dev_info/warn/err. This can clearly tell user about
GPU device information where ras is. And add some
other ras message printing to make it more clear
and friendly as well.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Uncorrectable error count printing is missed when issuing UMC
UE injection. When going to the error count log function in GPU
recover work thread, there is no chance to get correct error count
value by last error injection and print, because the error status
register is automatically cleared after reading in UMC ecc irq
callback. So add such message printing in UMC ecc irq cb to be
consistent with other RAS error interrupt cases.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Should prevent flicker if PP_OVERDRIVE_MASK is set.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628Signed-off-by: Sergei Lopatin <magist3r@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If reading dpcd happens ahead of hw initialization, then aconnector is NULL
at this point. This is expected, so there is no need to output an error (which will
spam dmesg.log)

[How]
Change type of message from "error" to "DC_LOG_DC".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Under bare metal, there is no more else to take
care of the GPU register access through MMIO.
Under Virtualization, to access GPU register is
implemented through KIQ during run-time due to
world-switch.

Therefore, under SR-IOV user can only access
debugfs to r/w GPU registers when meets all
three conditions below.
- amdgpu_gpu_recovery=0
- TDR happened
- in_gpu_reset=0

v2: merge amdgpu_virt_can_access_debugfs() into
    amdgpu_virt_enable_access_debugfs()

v3: drop ret variable in amdgpu_virt_enable_access_debugfs()
    and directly return result
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

added macro to define timeout
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This sequence is recommended by PMFW team for the baco reset
with PMFW reloaded. And it seems able to address the random
failure seen on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Execution will only reach here if the asserted condition is true.
Hence there is no need for the additional check.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fixes unused variable warning.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add indirect access support to registers outside of
mmio bar.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

all the register access through kiq is redirected
to amdgpu_kiq_rreg/amdgpu_kiq_wreg
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

those are not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

all the mmCUR_CONTROL instances are in mmr range and
can be accessd directly by using RREG32/WREG32
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the workaround is not needed for soc15 ASICs except
for vega10. it is even not needed with latest vega10
vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.

v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add debugfs to get HDCP capability. This is also useful for
kms_content_protection igt test.

Use:
	cat /sys/kernel/debug/dri/0/DP-1/hdcp_sink_capability
	cat /sys/kernel/debug/dri/0/HDMI-A-1/hdcp_sink_capability
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Query the hdcp caps of a link, it is useful and can be reported to the user

[How]
Create a query function and call it during link detect
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is at least 1 VG20 DID that does not have an FRU, and trying to read
that will cause a hang. For now, explicitly support reading the FRU for
Arcturus and for the WKS VG20 DIDs, and skip for everything else.
This re-enables serial number reporting for server cards

v2: Add ASIC check
v3: Don't default to true for pre-VG20
v4: Use DID instead of parsing the VBIOS
v5: Sqaush in overflow warning fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>