- 12 Apr, 2016 13 commits
-
-
Martin K. Petersen authored
commit f08bb1e0 upstream. During revalidate we check whether device capacity has changed before we decide whether to output disk information or not. The check for old capacity failed to take into account that we scaled sdkp->capacity based on the reported logical block size. And therefore the capacity test would always fail for devices with sectors bigger than 512 bytes and we would print several copies of the same discovery information. Avoid scaling sdkp->capacity and instead adjust the value on the fly when setting the block device capacity and generating fake C/H/S geometry. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Mauro Carvalho Chehab authored
commit e8e3039f upstream. The au0828 dev_state is actually a bit mask. It should not be checking with "==" but, instead, with a logic and. There are some places where it was doing it wrong. Fix that by replacing the dev_state set/clear/test with the bitops. As reviewed by Shuah: "Looks good. Tested running bind/unbind au0828 loop for 1000 times. Didn't see any problems and the v4l2_querycap() problem has been fixed with this patch. After the above test, ran bind/unbind snd_usb_audio 1000 times. Didn't see any problems. Generated media graph and the graph looks good." Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Tested-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit ed940cd2 upstream. au0828_v4l2_close() check for dev_state == DEV_DISCONNECTED will fail to detect the device disconnected state correctly, if au0828_v4l2_open() runs to set the DEV_INITIALIZED bit. A loop test of bind/unbind found this bug by increasing the likelihood of au0828_v4l2_open() occurring while unbind is in progress. When au0828_v4l2_close() fails to detect that the device is in disconnect state, it attempts to power down the device and fails with the following general protection fault: [ 260.992962] Call Trace: [ 260.993008] [<ffffffffa0f80f0f>] ? xc5000_sleep+0x8f/0xd0 [xc5000] [ 260.993095] [<ffffffffa0f6803c>] ? fe_standby+0x3c/0x50 [tuner] [ 260.993186] [<ffffffffa0ef541c>] au0828_v4l2_close+0x53c/0x620 [au0828] [ 260.993298] [<ffffffffa0d08ec0>] v4l2_release+0xf0/0x210 [videodev] [ 260.993382] [<ffffffff81570f9c>] __fput+0x1fc/0x6c0 [ 260.993449] [<ffffffff815714ce>] ____fput+0xe/0x10 [ 260.993519] [<ffffffff8116eb83>] task_work_run+0x133/0x1f0 [ 260.993602] [<ffffffff810035d0>] exit_to_usermode_loop+0x140/0x170 [ 260.993681] [<ffffffff810061ca>] syscall_return_slowpath+0x16a/0x1a0 [ 260.993754] [<ffffffff82835fb3>] entry_SYSCALL_64_fastpath+0xa6/0xa8 Signed-off-by:
-
Oliver Neukum authored
commit 5a07975a upstream. The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61Signed-off-by:
Oliver Neukum <ONeukum@suse.com> [johan: fix OOB endpoint check and add error messages ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Oliver Neukum authored
commit c55aee1b upstream. An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by:
-
Oliver Neukum authored
commit 4e9a0b05 upstream. An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by:
-
Vladis Dronov authored
commit 836b34a9 upstream. create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and create_uaxx_quirk() functions allocate the audioformat object by themselves and free it upon error before returning. However, once the object is linked to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be double-freed, eventually resulting in a memory corruption. This patch fixes these failures in the error paths by unlinking the audioformat object before freeing it. Based on a patch by Takashi Iwai <tiwai@suse.de> [Note for stable backports: this patch requires the commit 902eb7fd ('ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()')] Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283358Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 902eb7fd upstream. Just a minor code cleanup: unify the error paths. Signed-off-by:
-
Filipe Manana authored
commit de17e793 upstream. If the lower or upper directory of an overlayfs mount belong to a btrfs file system and we fsync the file through the overlayfs' merged directory we ended up accessing an inode that didn't belong to btrfs as if it were a btrfs inode at btrfs_sync_file() resulting in a crash like the following: [ 7782.588845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000544 [ 7782.590624] IP: [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.591931] PGD 4d954067 PUD 1e878067 PMD 0 [ 7782.592016] Oops: 0002 [#6] PREEMPT SMP DEBUG_PAGEALLOC [ 7782.592016] Modules linked in: btrfs overlay ppdev crc32c_generic evdev xor raid6_pq psmouse pcspkr sg serio_raw acpi_cpufreq parport_pc parport tpm_tis i2c_piix4 tpm i2c_core processor button loop autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs] [ 7782.592016] CPU: 10 PID: 16437 Comm: xfs_io Tainted: G D 4.5.0-rc6-btrfs-next-26+ #1 [ 7782.592016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7782.592016] task: ffff88001b8d40c0 ti: ffff880137488000 task.ti: ffff880137488000 [ 7782.592016] RIP: 0010:[<ffffffffa030b7ab>] [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.592016] RSP: 0018:ffff88013748be40 EFLAGS: 00010286 [ 7782.592016] RAX: 0000000080000000 RBX: ffff880133b30c88 RCX: 0000000000000001 [ 7782.592016] RDX: 0000000000000001 RSI: ffffffff8148fec0 RDI: 00000000ffffffff [ 7782.592016] RBP: ffff88013748bec0 R08: 0000000000000001 R09: 0000000000000000 [ 7782.624248] R10: ffff88013748be40 R11: 0000000000000246 R12: 0000000000000000 [ 7782.624248] R13: 0000000000000000 R14: 00000000009305a0 R15: ffff880015e3be40 [ 7782.624248] FS: 00007fa83b9cb700(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000 [ 7782.624248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7782.624248] CR2: 0000000000000544 CR3: 00000001fa652000 CR4: 00000000000006e0 [ 7782.624248] Stack: [ 7782.624248] ffffffff8108b5cc ffff88013748bec0 0000000000000246 ffff8800b005ded0 [ 7782.624248] ffff880133b30d60 8000000000000000 7fffffffffffffff 0000000000000246 [ 7782.624248] 0000000000000246 ffffffff81074f9b ffffffff8104357c ffff880015e3be40 [ 7782.624248] Call Trace: [ 7782.624248] [<ffffffff8108b5cc>] ? arch_local_irq_save+0x9/0xc [ 7782.624248] [<ffffffff81074f9b>] ? ___might_sleep+0xce/0x217 [ 7782.624248] [<ffffffff8104357c>] ? __do_page_fault+0x3c0/0x43a [ 7782.624248] [<ffffffff811a2351>] vfs_fsync_range+0x8c/0x9e [ 7782.624248] [<ffffffff811a237f>] vfs_fsync+0x1c/0x1e [ 7782.624248] [<ffffffff811a24d6>] do_fsync+0x31/0x4a [ 7782.624248] [<ffffffff811a2700>] SyS_fsync+0x10/0x14 [ 7782.624248] [<ffffffff81493617>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7782.624248] Code: 85 c0 0f 85 e2 02 00 00 48 8b 45 b0 31 f6 4c 29 e8 48 ff c0 48 89 45 a8 48 8d 83 d8 00 00 00 48 89 c7 48 89 45 a0 e8 fc 43 18 e1 <f0> 41 ff 84 24 44 05 00 00 48 8b 83 58 ff ff ff 48 c1 e8 07 83 [ 7782.624248] RIP [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.624248] RSP <ffff88013748be40> [ 7782.624248] CR2: 0000000000000544 [ 7782.661994] ---[ end trace 721e14960eb939bc ]--- This started happening since commit 4bacc9c9 (overlayfs: Make f_path always point to the overlay and f_inode to the underlay) and even though after this change we could still access the btrfs inode through struct file->f_mapping->host or struct file->f_inode, we would end up resulting in more similar issues later on at check_parent_dirs_for_sync() because the dentry we got (from struct file->f_path.dentry) was from overlayfs and not from btrfs, that is, we had no way of getting the dentry that belonged to btrfs (we always got the dentry that belonged to overlayfs). The new patch from Miklos Szeredi, titled "vfs: add file_dentry()" and recently submitted to linux-fsdevel, adds a file_dentry() API that allows us to get the btrfs dentry from the input file and therefore being able to fsync when the upper and lower directories belong to btrfs filesystems. This issue has been reported several times by users in the mailing list and bugzilla. A test case for xfstests is being submitted as well. Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101951 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109791Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 6490865c upstream. This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 894f2fc4 upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
-
Hans de Goede authored
commit 5e7515ba upstream. pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks, where as the closely related a23 has 3 banks. This matches with the datasheet for the A33 where only interrupt banks B and G are specified where as the A23 has banks A, B and G. However the A33 being the A23 derative it is means that the interrupt configure/status io-addresses for the 2 banks it has are not changed from the A23, iow they have the same address as if bank A was still present. Where as the sunxi pinctrl currently tries to use the A23 bank A addresses for bank B, since the pinctrl code does not know about the removed bank A. Add a irq_bank_base parameter and use this where appropriate to take the missing bank A into account. This fixes external interrupts not working on the A33 (tested with an i2c touchscreen controller which uses an external interrupt). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Govindraj Raja authored
commit e9adb336 upstream. mfio 84 to 89 are described wrongly, fix it to describe the right pin and add them to right pin-mux group. The correct order is: pll1_lock => mips_pll -- MFIO_83 pll2_lock => audio_pll -- MFIO_84 pll3_lock => rpu_v_pll -- MFIO_85 pll4_lock => rpu_l_pll -- MFIO_86 pll5_lock => sys_pll -- MFIO_87 pll6_lock => wifi_pll -- MFIO_88 pll7_lock => bt_pll -- MFIO_89 Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: James Hartley <James.Hartley@imgtec.com> Fixes: cefc03e5("pinctrl: Add Pistachio SoC pin control driver") Signed-off-by:
Govindraj Raja <Govindraj.Raja@imgtec.com> Acked-by:
Andrew Bresticker <abrestic@chromium.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 11 Apr, 2016 11 commits
-
-
Sebastian Siewior authored
commit 08a5bb29 upstream. hugepd_free() used __get_cpu_var() once. Nothing ensured that the code accessing the variable did not migrate from one CPU to another and soon this was noticed by Tiejun Chen in 94b09d75 ("powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var"). So we had it fixed. Christoph Lameter was doing his __get_cpu_var() replaces and forgot PowerPC. Then he noticed this and sent his fixed up batch again which got applied as 69111bac ("powerpc: Replace __get_cpu_var uses"). The careful reader will noticed one little detail: get_cpu_var() got replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does a preempt_enable() and nothing that does preempt_disable() so we underflow the preempt counter. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alex Deucher authored
commit 0e5585dc upstream. Higher mclk values are not stable due to a bug somewhere. Limit them for now. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit a64663d9 upstream. bug: https://bugzilla.kernel.org/show_bug.cgi?id=115291Signed-off-by:
-
Guenter Roeck authored
commit 3c2e2266 upstream. arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680 #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Miklos Szeredi authored
commit be62a1a8 upstream. NFS may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
commit d101a125 upstream. This series fixes bugs in nfs and ext4 due to 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay"). Regular files opened on overlayfs will result in the file being opened on the underlying filesystem, while f_path points to the overlayfs mount/dentry. This confuses filesystems which get the dentry from struct file and assume it's theirs. Add a new helper, file_dentry() [*], to get the filesystem's own dentry from the file. This checks file->f_path.dentry->d_flags against DCACHE_OP_REAL, and returns file->f_path.dentry if DCACHE_OP_REAL is not set (this is the common, non-overlayfs case). In the uncommon case it will call into overlayfs's ->d_real() to get the underlying dentry, matching file_inode(file). The reason we need to check against the inode is that if the file is copied up while being open, d_real() would return the upper dentry, while the open file comes from the lower dentry. [*] If possible, it's better simply to use file_inode() instead. Signed-off-by:
-
Alex Deucher authored
commit f971f226 upstream. bug: https://bugs.freedesktop.org/show_bug.cgi?id=94692Signed-off-by:
-
Bobi Mihalca authored
commit 83a9efb5 upstream. Apply the new fixup that is used for ASUS N750JV to another similar model, N500JV, too, for reducing the headphone noise. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
Bobi Mihalca <bobbymihalca@touchtech.ro> Signed-off-by:
-
Bobi Mihalca authored
commit 9d4dc584 upstream. For reducing the noise from the headphone output on ASUS N750JV, call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
-
Bobi Mihalca authored
commit 70cf2cbd upstream. ASUS N750JV needs the same fixup as N550 for enabling its subwoofer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181Signed-off-by:
-
Nicolai Stange authored
commit e5435891 upstream. Despite what the DocBook comment to pkcs7_validate_trust() says, the *_trusted argument is never set to false. pkcs7_validate_trust() only positively sets *_trusted upon encountering a trusted PKCS#7 SignedInfo block. This is quite unfortunate since its callers, system_verify_data() for example, depend on pkcs7_validate_trust() clearing *_trusted on non-trust. Indeed, UBSAN splats when attempting to load the uninitialized local variable 'trusted' from system_verify_data() in pkcs7_validate_trust(): UBSAN: Undefined behaviour in crypto/asymmetric_keys/pkcs7_trust.c:194:14 load of value 82 is not a valid value for type '_Bool' [...] Call Trace: [<ffffffff818c4d35>] dump_stack+0xbc/0x117 [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff8194113b>] ubsan_epilogue+0xd/0x4e [<ffffffff819419fa>] __ubsan_handle_load_invalid_value+0x111/0x158 [<ffffffff819418e9>] ? val_to_string.constprop.12+0xcf/0xcf [<ffffffff818334a4>] ? x509_request_asymmetric_key+0x114/0x370 [<ffffffff814b83f0>] ? kfree+0x220/0x370 [<ffffffff818312c2>] ? public_key_verify_signature_2+0x32/0x50 [<ffffffff81835e04>] pkcs7_validate_trust+0x524/0x5f0 [<ffffffff813c391a>] system_verify_data+0xca/0x170 [<ffffffff813c3850>] ? top_trace_array+0x9b/0x9b [<ffffffff81510b29>] ? __vfs_read+0x279/0x3d0 [<ffffffff8129372f>] mod_verify_sig+0x1ff/0x290 [...] The implication is that pkcs7_validate_trust() effectively grants trust when it really shouldn't have. Fix this by explicitly setting *_trusted to false at the very beginning of pkcs7_validate_trust(). Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 05 Apr, 2016 3 commits
-
-
Kamal Mostafa authored
This reverts commit 86766cbb. Not suitable for 4.2: no max_burst. Signed-off-by:
-
Kamal Mostafa authored
Signed-off-by: -
Andy Lutomirski authored
commit b7a58459 upstream. On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ kamal: backport to 4.2-stable: no X86_FEATURE_XENPV so just call xen_pv_domain() directly ] Acked-by:
-
- 31 Mar, 2016 13 commits
-
-
Krzysztof Kozlowski authored
commit fb166ba1 upstream. The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 6f1c1e71 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Julian Anastasov authored
commit f719e375 upstream. Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead") Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Laurent Pinchart authored
commit f6acfcdc upstream. Commit 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") refactored the stream start code and removed the SRU CTRL0 register write by mistake. Add it back. Fixes: 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Borislav Petkov authored
commit f594bae0 upstream. I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Eric Dumazet authored
commit eee57723 upstream. When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luis de Bethencourt authored
commit ed49e650 upstream. When the function dev_get_phys_port_name was added it missed a description for it's len argument. Adding it. Fixes: db24a904 ("net: add support for phys_port_name") Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Guillaume Nault authored
commit e8e56ffd upstream. Locking ppp_mutex must be done before dereferencing file->private_data, otherwise it could be modified before ppp_unattached_ioctl() takes the lock. This could lead ppp_unattached_ioctl() to override ->private_data, thus leaking reference to the ppp_file previously pointed to. v2: lock all ppp_ioctl() instead of just checking private_data in ppp_unattached_ioctl(), to avoid ambiguous behaviour. Fixes: f3ff8a4d ("ppp: push BKL down into the driver") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Arnd Bergmann authored
commit e07ff943 upstream. The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit dec63a4d upstream. gcc-6.0 found an ancient bug in the paride driver, which had a "module_param(verbose, bool, 0);" since before 2.6.12, but actually uses it to accept '0', '1' or '2' as arguments: drivers/block/paride/pd.c: In function 'pd_init_dev_parms': drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare] #define DBMSG(msg) ((verbose>1)?(msg):NULL) In 2012, Rusty did a cleanup patch that also changed the type of the variable to 'bool', which introduced what is now a gcc warning. This changes the type back to 'int' and adapts the module_param() line instead, so it should work as documented in case anyone ever cares about running the ancient driver with debugging. Fixes: 90ab5ee9 ("module_param: make bool parameters really bool (drivers & misc)") Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
