Remove duplicated #include('s) in
  drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

scu ipc driver fails sometimes to read/write. This add logs with register
addr and ret code when these errors occur.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

To avoid mismatch in driver and firmware error codes assign specfic values
to each enum.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The PCM interface in SST driver is cmds only, this patch changes the interface to open, close and cmd interface.
This allows SST driver to keep easy track of handles open
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This driver is for the Security Processor, a dedicated encryption
and decryption driver that is used on the Intel mobile platform.

This has been checked with checkpatch and there are four
warnings for lines over 80 charactors.

There is one compile warning. This is for a function that is
only used if the rar register driver is needed. There is an
ifdef in a header file that stubs out the rar register driver
if the rar register is not configured.

This driver does add a configuration, which is CONFIG_DX_SEP.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

clearpad_tm1217 driver uses many input_() interfaces, so it should
depend on INPUT.

clearpad_tm1217.c:(.text+0xf19ac): undefined reference to `input_unregister_device'
clearpad_tm1217.c:(.text+0xf1b19): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1b31): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1bb4): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1bf2): undefined reference to `input_event'
drivers/built-in.o:clearpad_tm1217.c:(.text+0xf1c08): more undefined references to `input_event' follow
clearpad_tm1217.c:(.text+0xf1df3): undefined reference to `input_allocate_device'
clearpad_tm1217.c:(.text+0xf1eac): undefined reference to `input_set_abs_params'
clearpad_tm1217.c:(.text+0xf1ed1): undefined reference to `input_set_abs_params'
clearpad_tm1217.c:(.text+0xf1ed8): undefined reference to `input_register_device'
clearpad_tm1217.c:(.text+0xf2040): undefined reference to `input_unregister_device'
clearpad_tm1217.c:(.text+0xf204b): undefined reference to `input_free_device'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ramesh Agarwal <ramesh.agarwal@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch fix following warning:
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:67:22:
warning: ‘pft1000info’ may be used uninitialized in this function
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stick to the 80 character line limit at least for code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove depreciated macro from header
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Align DAC sysfs attributes naming with the convention used by ADC
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

- removed PKTSETLEN macro and used __skb_trim call instead.
- removed unused macros PKTSETPOOL and PKTPOOL
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Replacing PKTPUSH by skb_push() call and PKTPULL by skb_pull() call to make
it obvious what the operation is doing with the packet.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This removes the remaining bit of aava dependent and related bits from driver
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The spectra nand driver takes quite some time to initialize because
it needs to scan the whole nand disk to find the latest block table.
This patch initializes the spectra nand driver asynchronously so that
other things in the kernel can initialize in parallel to the scanning
operation.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Currently there are some driver initialization logic that
is not part of nand_pci_probe function. This will result in
that part of driver initialization code executing even on
platforms without the corresponding hardware which is always
dangerous.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

GCC complains that if (info->CardReady) is false we kfree() an
uninitialized pointer.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Get rid of the private PCI access routines and replace with standard calls from linux/pci.h in nicpci.c

(The private versions are still used in siutils.c... for now)
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Do the substitution (and then fix all the dang lines that were pushed past 80 columns.)

Some of the touched lines triggered checkpatch warnings for completely unrelated
reasons that were already there. Those will have to be addressed later.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

status is used to store negative error codes throughout.  The only place
where this is a runtime bug is if create_worker_threads() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

wrm() returns negative error codes so "ret" needs to be signed here.
There was place where wrm() returned positive EACCES instead of
negative -EACCES so I fixed that as well.  Also a few checkpatch.pl
issues.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Typo causes build errors.  Did anyone even build this driver?
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a static checker patch and I don't have this hardware.

This code is unusual because while I've often seen a double lock, this
is the first time I've seen code that takes a lock 11 times in a row.  I
feel like I must have missed something.  But I've looked very carefully
I don't see any way the original code is correct.  Does spi_sync()
somehow release the lock in a way that I can't see?  Even if it does,
the locking would still be wrong.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We dereference "ts" in the printk so move the kfree() down a line.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The easycap driver has module parameters (bars, gain, & debug)
with global scope that intrude on the kernel namespace and cause
build problems.  Change the names of them to be driver-specific
and make 2 of them static.

drivers/built-in.o:(.bss+0x97c00): multiple definition of `debug'
ld: Warning: size of symbol `debug' changed from 58 in arch/x86/built-in.o to 4 in drivers/built-in.o
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The synaptics_i2c_rmi4 driver uses input_*() interfaces,
so it should depend on INPUT to fix its build errors:

ERROR: "input_event" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_free_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_register_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_set_abs_params" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_allocate_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_unregister_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: naveen.gaddipati@stericsson.com, js.ha@stericsson.com
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a patch to the dirhash.c file that fixes up a number of issues
found by the checkpatch.pl tool
Signed-off-by: Tushar Mehta <tushariiitb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I was going to remove netvsc_set_multicast_list() so I think it is worth
adding a comment since it isn't immediately clear why you would want
this.
Signed-off-by: Brandon Philips <brandon@ifup.org>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>