- 03 Jun, 2009 40 commits
-
-
Christian Lamparter authored
This patch removes a redundant flag. .cap = IEEE80211_HT_CAP_MAX_AMSDU | \ > IEEE80211_HT_CAP_SM_PS | \ < [...] \ > IEEE80211_HT_CAP_SM_PS, \ < .ampdu_factor = 3, \ Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch fixes a bug in configure_filter's (sub-)routines. We never really cleared the flags once we updated the hardware state, so we wasted our resources by applying already active settings. Signed-off-by:
-
Christian Lamparter authored
This patch introduces 3 new function which are used to update the MAC state, whenever needed... e.g: after a band switch. Signed-off-by:
-
Christian Lamparter authored
This patch replace a few constant magics which may affected the device when operating in a 40MHz channel. Signed-off-by:
-
Christian Lamparter authored
This patch only contains a few uncritical updates for the hardware definition header. Signed-off-by:
-
Christian Lamparter authored
This patch fixes a simple copy & paste error that affected beacon transmission in 802.11a mode. Signed-off-by:
-
Johannes Berg authored
This removes the use of the deprecated radio_enabled setting and code associated with that. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Luis R. Rodriguez authored
This fixes an incorrect assumption (BUG_ON) made in cfg80211 when handling country IE regulatory requests. The assumption was that we won't try to call_crda() twice for the same event and therefore we will not recieve two replies through nl80211 for the regulatory request. As it turns out it is true we don't call_crda() twice for the same event, however, kobject_uevent_env() *might* send the udev event twice and/or userspace can simply process the udev event twice. We remove the BUG_ON() and simply ignore the duplicate request. For details refer to this thread: http://marc.info/?l=linux-wireless&m=124149987921337&w=2 Cc: stable@kernel.org Reported-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Johannes Berg authored
NETDEV_UP is called after the device is set UP, but sometimes it is useful to be able to veto the device UP. Introduce a new NETDEV_PRE_UP notifier that can be used for exactly this. The first use case will be cfg80211 denying interfaces to be set UP if the device is known to be rfkill'ed. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luis R. Rodriguez authored
This adds: USB 0x057C:0x8401 AVM FRITZ!WLAN USB Stick N USB 0x057C:0x8402 AVM FRITZ!WLAN USB Stick N 2.4 These devices require the 1-stage firmware, if not present we don't continue. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by:
-
Luis R. Rodriguez authored
You can get the stage 1 firmware from here: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/ar9170.fw md5sum: 34feec4ec0eae3bb92c7c1ea2dfb4530 sha1sum: 6e5250498b815c2940d97242de31e054ae44e079 Its license: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/LICENSE This is a new firmware, tested with WNDA3100. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by:
-
Jouni Malinen authored
It looks like mac80211 can request the driver to start beaconing with a beacon interval of zero in some cases (at least for mesh point). This does not sound correct and something may need to be fixed in mac80211. However, taken into account the unpleasantness of getting stuck in an infinite busy loop with rtnl_lock held, let's add a quick workaround in the driver to avoid the worst symptom while someone more familiar with the mesh implementation can figure out what should be done with mac80211 as far as beacon interval configuration is concerned. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by:
-
Bob Copeland authored
ieee80211_conf->beacon_int was deprecated and removed in a cleanup patch, however it was accidentally added back to ath5k in the change "ath5k: Allow user/driver to set txpower." Remove it once more, fixing the following warning: [13091.968902] WARNING: at drivers/net/wireless/ath/ath5k/base.c:2167 warn_slowpath_null+0x15/0x1a() [13091.968906] Hardware name: MacBook1,1 [13091.968909] Modules linked in: usb_storage fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy hid_apple arc4 ecb snd_seq_oss snd_seq_midi_event usbhid snd_seq ath5k mac80211 appletouch snd_seq_device snd_pcm_oss snd_mixer_oss sky2 snd_pcm ath processor cfg80211 snd_timer sg ohci1394 snd uhci_hcd bitrev ieee1394 joydev ehci_hcd crc32 snd_page_alloc button ac thermal battery sr_mod applesmc cdrom evdev input_polldev unix [last unloaded: microcode] [13091.968985] Pid: 2132, comm: phy0 Tainted: G W 2.6.30-rc5-wl #118 [13091.968988] Call Trace: [13091.968994] [<c0125884>] warn_slowpath_fmt+0x77/0xa6 [13091.969003] [<c03557d8>] ? _spin_unlock+0x2c/0x41 [13091.969008] [<c0355a56>] ? _spin_lock_irqsave+0x15/0x69 [13091.969012] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969019] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969024] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969029] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969034] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969039] [<c01258c8>] warn_slowpath_null+0x15/0x1a [13091.969054] [<f965846d>] ath5k_beacon_update_timers+0x44/0x27f [ath5k] [13091.969059] [<c0126370>] ? vprintk+0x2dd/0x312 [13091.969063] [<c0125e50>] ? release_console_sem+0x1a6/0x1d3 [13091.969076] [<f96586c5>] ath5k_reset_tsf+0x1d/0x2c [ath5k] [13091.969095] [<f93f4426>] __ieee80211_sta_join_ibss+0x35/0x3aa [mac80211] [13091.969102] [<c0252793>] ? extract_entropy+0x47/0x8a [13091.969121] [<f93f4b21>] ieee80211_sta_find_ibss+0x2de/0x32f [mac80211] [13091.969126] [<c035422c>] ? mutex_lock_nested+0x28b/0x2a5 [13091.969145] [<f93f4b8e>] ? ieee80211_ibss_notify_scan_completed+0x1c/0x6f [mac80211] [13091.969164] [<f93f4bc9>] ieee80211_ibss_notify_scan_completed+0x57/0x6f [mac80211] [13091.969182] [<f93f26da>] ieee80211_scan_completed+0x31a/0x33f [mac80211] [13091.969201] [<f93f27ca>] ieee80211_scan_work+0xcb/0x18b [mac80211] [13091.969207] [<c0133a6a>] worker_thread+0x1b1/0x28e [13091.969212] [<c0133a25>] ? worker_thread+0x16c/0x28e [13091.969230] [<f93f26ff>] ? ieee80211_scan_work+0x0/0x18b [mac80211] [13091.969237] [<c013736e>] ? autoremove_wake_function+0x0/0x38 [13091.969242] [<c01338b9>] ? worker_thread+0x0/0x28e [13091.969246] [<c0137031>] kthread+0x4a/0x70 [13091.971460] [<c0136fe7>] ? kthread+0x0/0x70 [13091.971467] [<c0103527>] kernel_thread_helper+0x7/0x10 [13091.971470] ---[ end trace 8defaa5d15c50cef ]--- Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Luis R. Rodriguez authored
When the SME requests to associate to an open AP ieee80211_sta_set_extra_ie() can be called with zero IE length. When this happens or when the extra IE has already been set -EALREADY is passed down and the supplicant will complain that the operation is already in progress and it will not let us associate. We correct this by treating -EALREADY from ieee80211_sta_set_extra_ie() as a success just as we do for wext. Cc: Shan.Palanisamy@Atheros.com Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Jeff Hansen authored
This patch adds the debug file to the ath9k debugfs, which lets you modify the debug_mask at runtime, without having to reload the ath9k module. Signed-off-by:
Jeff Hansen <x@jeffhansen.com> Signed-off-by:
-
Jeff Hansen authored
This patch combines the legacy and 11n rcstats into one, using the normal rate table indices instead of two separate indices for each mode. Legacy rates also get all of the PER and retry information, now, too. Signed-off-by:
-
Jeff Hansen authored
I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the stuck beacon, and did a reset. But it would fail the SC_OP_TSF_RESET check in ath_beacon_config_ap. This patch gets the beacon fully reconfigured after the reset. Signed-off-by:
-
Johannes Berg authored
On non-AP interfaces userspace has no business interfering with the station management, this can confuse mac80211 (and other drivers probably wouldn't support it anyway). Allow adding and removing stations only on AP interfaces. (Reconcile this w/ previous version of patch posted with same subject... -- JWL) Signed-off-by:
-
Johannes Berg authored
I accidentally transposed these in the patch that "fixed" the defaults, leading to extremely low throughput because of the huge min CW. Signed-off-by:
-
Randy Dunlap authored
Fix printk format for size_t variable: drivers/net/wireless/iwmc3200wifi/fw.c:75: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: ilw@linux.intel.com Acked-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Samuel Ortiz authored
We were sending the fragmentation threshold value to the wrong table, causing an LMAC assert when setting it from wext. Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Rami Rosen authored
When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following warning: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning: unused variable ‘inta_fh’ This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG before the declaration of inta_fh in iwl_isr() in drivers/net/wireless/iwlwifi/iwl-core.c Signed-off-by:
Rami Rosen <ramirose@gmail.com> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Johannes Berg authored
Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by:
-
Johannes Berg authored
When a scan finishes only the program that asked for it knows what kind of scan it was; let's tell everybody else about the scan parameters as well so they can evaluate the result of the scan better. Also helps with debugging. Signed-off-by:
-
Johannes Berg authored
We have some validation code in mac80211 but said code will force an invalid AID to 0 which isn't a valid AID either; instead require a valid AID (1-2007) to be passed in from userspace in cfg80211 already. Also move the code before the race comment since it can only be executed during STA addition and thus is not racy. Signed-off-by:
-
Ivo van Doorn authored
This removes the last usage of beacon_int inside the iee80211_config structure from rt2x00. The attempt is a bit hackish, and subject to change in the future when the entire rt2x00_dev structure is cleaned up and restructured. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Johannes Berg authored
Ivo has updated the driver to no longer use the change flag, so we can remove that, but rt2x00 and ath5k still use the actual value so let's mark it as deprecated too. Signed-off-by:
-
Dan Williams authored
Oddly enough, the firmware's JOIN/START commands don't appear to have any facility for setting custom IEs, thus the started adhoc network doesn't advertise its WPA capability in the beacon. Whee! Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
And fix up setting authentication suite for v9+ firmware too. Signed-off-by:
-
Dan Williams authored
Easier to read and more conformant with kernel style. Signed-off-by:
-
Dan Williams authored
Some of the parameters for association/join/start commands aren't used (like the FH and CF IEs for IBSS, and the FH IE for BSS), so get rid of their unions to reduce indirection. Also clean up structure names for kernel style. Signed-off-by:
-
Reinette Chatre authored
Polling function returns positive time if polling was needed to read value. This is still success. Signed-off-by:
-
Reinette Chatre authored
This hunk of code was removed in patch "iwlwifi: do not cancel delayed work inside spin_lock_irqsave" submitted at http://marc.info/?l=linux-wireless&m=124267503030042&w=2 This same patch in this repo does not remove this hunk. Remove it here. Signed-off-by:
-
Ivo van Doorn authored
new patch to add more usb_dev to rt2800usb.c . IDs 'stolen' from the latest Ralink linux driver(2009_0520_RT3070_Linux_STA_v2.1.1.0.tar.gz) Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The comment (which I remove) says that the translation is done SPI routines. IMHO this can't work because the SPI driver does not know whether the incomming bytes are part of the registers/bytes which need to be flipped or part of packet data which has to remain untouched. While adding le helpers I also removed spu_write_u32() which has no users. Tested-by:
Andrey Yurovsky <andrey@cozybit.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
-
John W. Linville authored
Reported-by:
-
Haiying Wang authored
Signed-off-by:
Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by:
-
Haiying Wang authored
Current code makes the UCC whose register range includes the current mdio register to be the MII managemnt interface master of the QE. If there is more than one mdio bus for QE, the UCC of the last mdio bus will be the MII management interface master which will make the primary mdio bus working unproperly, e.g. can not get the right clock. Normally the primary mdio bus is the first UEC's mdio bus. This patch allows the first UCC to be the MII management interface master of the multiple UCC mdio buses. Signed-off-by:
-
