- 10 Sep, 2010 4 commits
-
-
Tao Ma authored
In ocfs2, actually we don't allow any direct write pass i_size, see the function ocfs2_prepare_inode_for_write. So we don't need the bogus simple_setsize. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
-
Tao Ma authored
Now orphan scan worker has no trace log, so it is very hard to tell whether it is finished or blocked. So add 2 mlog trace log so that we can tell whether the current orphan scan worker is blocked or not. It does help when I analyzed a orphan scan bug. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
-
Tristan Ye authored
The reason why we need this ioctl is to offer the none-privileged end-user a possibility to get filesys info gathering. We use OCFS2_IOC_INFO to manipulate the new ioctl, userspace passes a structure to kernel containing an array of request pointers and request count, such as, * From userspace: struct ocfs2_info_blocksize oib = { .ib_req = { .ir_magic = OCFS2_INFO_MAGIC, .ir_code = OCFS2_INFO_BLOCKSIZE, ... } ... } struct ocfs2_info_clustersize oic = { ... } uint64_t reqs[2] = {(unsigned long)&oib, (unsigned long)&oic}; struct ocfs2_info info = { .oi_requests = reqs, .oi_count = 2, } ret = ioctl(fd, OCFS2_IOC_INFO, &info); * In kernel: Get the request pointers from *info*, then handle each request one bye one. Idea here is to make the spearated request small enough to guarantee a better backward&forward compatibility since a small piece of request would be less likely to be broken if filesys on raw disk get changed. Currently, the following 7 requests are supported per the requirement from userspace tool o2info, and I believe it will grow over time:-) OCFS2_INFO_CLUSTERSIZE OCFS2_INFO_BLOCKSIZE OCFS2_INFO_MAXSLOTS OCFS2_INFO_LABEL OCFS2_INFO_UUID OCFS2_INFO_FS_FEATURES OCFS2_INFO_JOURNAL_SIZE This ioctl is only specific to OCFS2. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: Update mach-types ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions" ARM: Ensure PTE modifications via dma_alloc_coherent are visible ARM: 6359/1: ep93xx: move clock initialization earlier Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" ARM: 6352/1: perf: fix event validation ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7 ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM ARM: 6330/1: perf: reword comments relating to perf_event_do_pending ARM: pxa168fb: fix section mismatch ARM: pxa: Make id const in pwm_probe() ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300 ARM: pxa: remove __init from cpufreq_driver->init() ARM: imx: set cache line size to 64 bytes for i.MX5 mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function mxc/tzic: add base address when accessing TZIC registers ARM: mach-shmobile: ap4evb: fix write protect for SDHI1 ARM: mach-shmobile: ap4evb: modify FSI2 ID ARM: mach-shmobile: do not enable the PLLC2 clock on init ARM: mach-shmobile: Clock framework comment fix ...
-
- 09 Sep, 2010 7 commits
-
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Partially revert e69edc7, which introduced automatic zreladdr support. The change in the way the manual definition is defined seems to be error and conflict prone. Go back to the original way we were handling this for the time being, while keeping the automatic zreladdr facility. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
-
Jonathan Corbet authored
lg_lock_global() currently only acquires spinlocks for online CPUs, but it's meant to lock all possible CPUs. Lglock-protected resources may be associated with removed CPUs - and, indeed, that could happen with the per-superblock open files lists. At Nick's suggestion, change for_each_online_cpu() to for_each_possible_cpu() to protect accesses to those resources. Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stefan Bader authored
So it can be used by all that need to check for that. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix hang with modified FIN handling on A0 cards RDMA/nes: Change state to closing after FIN RDMA/nes: Fix double CLOSE event indication crash RDMA/nes: Write correct register write to set TX pause param RDMA/cxgb3: Don't exceed the max HW CQ depth
-
git://oss.oracle.com/git/tma/linux-2.6Linus Torvalds authored
* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6: ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions ocfs2: allow return of new inode block location before allocation of the inode ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding ocfs2: split out inode alloc code from ocfs2_mknod_locked Ocfs2: Fix a regression bug from mainline commit(6b933c8e). ocfs2: Fix deadlock when allocating page ocfs2: properly set and use inode group alloc hint ocfs2: Use the right group in nfs sync check. ocfs2: Flush drive's caches on fdatasync ocfs2: make __ocfs2_page_mkwrite handle file end properly. ocfs2: Fix incorrect checksum validation error ocfs2: Fix metaecc error messages
-
- 08 Sep, 2010 29 commits
-
-
Roland Dreier authored
-
Faisal Latif authored
Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Faisal Latif authored
When the driver receives an AE for FIN received, it closes the connection without changing the state of the connection in the hardware to closing. By changing the state to closing, hardware will do a normal close sequence. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Faisal Latif authored
During a stress testing in a large cluster, multiple close event are detected and BUG() is hit in the iWARP core. The cause is that the active node gave up while waiting for an MPA response from the peer and tried to close the connection by sending RST. The passive node driver receives the RST but is waiting for MPA response from the user. When the MPA accept is received, the driver offloads the connection and sends a CLOSE event. The driver gets an AE indicating RESET received and also sends a CLOSE event, hitting a BUG(). Fix this by correcting RESET handling and sending CLOSE events. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Chien Tung authored
Setting TX pause param writes to the wrong register location causing the adapter to hang. Correct the define used to write the reigster. Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116Reported-by: Shiri Franchi <shirif@voltaire.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix device removal on unload Input: bcm5974 - adjust major/minor to scale Input: MT - initialize slots to unused Input: use PIT_TICK_RATE in vt beep ioctl Input: wacom - fix mousewheel handling for old wacom tablets
-
Linus Torvalds authored
Merge branch 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Add DEFINE_SEMAPHORE
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks io-mapping: Fix the address space annotations x86: Fix the address space annotations of iomap_atomic_prot_pfn() x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: gcc-4.6: kernel/*: Fix unused but set warnings mutex: Fix annotations to include it in kernel-locking docbook pid: make setpgid() system call use RCU read-side critical section MAINTAINERS: Add RCU's public git tree
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Try to handle unknown nmis with an enabled PMU perf, x86: Fix handle_irq return values perf, x86: Fix accidentally ack'ing a second event on intel perf counter oprofile, x86: fix init_sysfs() function stub lockup_detector: Sync touch_*_watchdog back to old semantics tracing: Fix a race in function profile oprofile, x86: fix init_sysfs error handling perf_events: Fix time tracking for events with pid != -1 and cpu != -1 perf: Initialize callchains roots's childen hits oprofile: fix crash when accessing freed task structs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix lock annotations fuse: flush background queue on connection close
-
Russell King authored
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by: Dave Hylands <dhylands@gmail.com> Tested-by: Dave Hylands <dhylands@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Thomas Gleixner authored
The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been done. Some of the users are real semaphores and we should name them as such instead of confusing everyone with "MUTEX". Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED] and DECLARE_MUTEX. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> LKML-Reference: <20100907125054.795929962@linutronix.de>
-
Mika Westerberg authored
Commit 7cfe2494 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
This reverts commit 4fa5518c, which causes a compilation regression for IXP4xx platforms. Reported-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mark Fasheh authored
ocfs2_create_inode_in_orphan() is used by reflink to create the newly reflinked inode simultaneously in the orphan dir. This allows us to easily handle partially-reflinked files during recovery cleanup. We have a problem though - the orphan dir stringifies inode # to determine a unique name under which the orphan entry dirent can be created. Since ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir before it can allocate the inode, we currently call into the orphan code: /* * We give the orphan dir the root blkno to fake an orphan name, * and allocate enough space for our insertion. */ status = ocfs2_prepare_orphan_dir(osb, &orphan_dir, osb->root_blkno, orphan_name, &orphan_insert); Using osb->root_blkno might work fine on unindexed directories, but the orphan dir can have an index. When it has that index, the above code fails to allocate the proper index entry. Later, when we try to remove the file from the orphan dir (using the actual inode #), the reflink operation will fail. To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the newly split out orphan and inode alloc code to figure out what the inode block number will be (once allocated) and then prepare the orphan dir from that data. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
We do this because ocfs2_create_inode_in_orphan() wants to order locking of the orphan dir with respect to locking of the inode allocator *before* making any changes to the directory. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
This allows code which needs to know the eventual block number of an inode but can't allocate it yet due to transaction or lock ordering. For example, ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation of the orphan dir because it can't yet know where the actual inode is placed - that code is actually in ocfs2_mknod_locked. This is a problem when the orphan dirs are indexed as the junk inode number will create an index entry which goes unused (and fails the later removal from the orphan dir). Now with these interfaces, ocfs2_create_inode_in_orphan() can run the block group search (and get back the inode block number) *before* any actual allocation occurs. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
ocfs2_search_chain() makes the same updates as ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding the bitmap update, use our helper function. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
Do this by splitting the bulk of the function away from the inode allocation code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to change and won't see any difference. The new function created, __ocfs2_mknod_locked() will be used shortly. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Tristan Ye authored
The patch is to fix the regression bug brought from commit 6b933c8e...( 'ocfs2: Avoid direct write if we fall back to buffered I/O'): http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285 The commit 6b933c8e changed __generic_file_aio_write to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to flush the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt the O_DIRECT semantics somehow in extented odirect writes. This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly flushed. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Jan Kara authored
We cannot call grab_cache_page() when holding filesystem locks or with a transaction started as grab_cache_page() calls page allocation with GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem causing deadlocks or various assertion failures. We have to use find_or_create_page() instead and pass it GFP_NOFS as we do with other allocations. Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Mark Fasheh authored
We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from res->sr_bg_blkno. Unfortunately, res->sr_bg_blkno is going to be zero under normal (non-fragmented) circumstances. The discontig block group patches effectively turned off that feature. Fix this by correctly calculating what the next group hint should be. Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Tao Ma authored
We have added discontig block group now, and now an inode can be allocated in an discontig block group. So get it in ocfs2_get_suballoc_slot_bit. The old ocfs2_test_suballoc_bit gets group block no from the allocation inode which is wrong. Fix it by passing the right group. Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Jan Kara authored
When 'barrier' mount option is specified, we have to issue a cache flush during fdatasync(2). We have to do this even if inode doesn't have I_DIRTY_DATASYNC set because we still have to get written *data* to disk so that they are not lost in case of crash. Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Singed-off-by: Tao Ma <tao.ma@oracle.com>
-
Tao Ma authored
__ocfs2_page_mkwrite now is broken in handling file end. 1. the last page should be the page contains i_size - 1. 2. the len in the last page is also calculated wrong. So change them accordingly. Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
-
Sunil Mushran authored
For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to read the inode off the disk. The latter first checks to see if that block is cached in the journal, and, if so, returns that block. That is ok. But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum of such blocks. Blocks that are cached in the journal may not have had their checksum computed as yet. We should not validate the checksums of such blocks. Fixes ossbz#1282 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Cc: stable@kernel.org Singed-off-by: Tao Ma <tao.ma@oracle.com>
-
Sunil Mushran authored
Like tools, the checksum validate function now prints the values in hex. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Singed-off-by: Tao Ma <tao.ma@oracle.com>
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd4: mask out non-access bits in nfs4_access_to_omode
-