- 17 Jun, 2009 40 commits
-
-
Ricardo Labiaga authored
Finds the 'struct nfs_client' that matches the server's address, major version number, and session ID. Signed-off-by:
Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by:
Benny Halevy <bhalevy@panasas.com>
-
Ricardo Labiaga authored
Defines a new 'struct nfs4_slot_table' in the 'struct nfs4_session' for use by the backchannel. Initializes, resets, and destroys the backchannel slot table in the same manner the forechannel slot table is initialized, reset, and destroyed. The sequenceid for each slot in the backchannel slot table is initialized to 0, whereas the forechannel slotid's sequenceid is set to 1. Signed-off-by:
-
Ricardo Labiaga authored
Generalize nfs4_init_slot_table() so it can be used to initialize the backchannel slot table in addition to the forechannel slot table. Signed-off-by:
-
Ricardo Labiaga authored
Generalize nfs4_reset_slot_table() so it can be used to reset the backchannel slot table in addition to the forechannel slot table. Signed-off-by:
-
Ricardo Labiaga authored
Change the type of cs_addr and csr_status to 'struct sockaddr' and '__be32' since the cb_sequence processing function will use existing functionality that expects these types. Signed-off-by:
-
Ricardo Labiaga authored
The 'rq_received' member of 'struct rpc_rqst' is used to track when we have received a reply to our request. With v4.1, the backchannel can now accept callback requests over the existing connection. Rename this field to make it clear that it is only used for tracking reply bytes and not all bytes received on the connection. Signed-off-by:
-
Benny Halevy authored
CB_SEQUENCE must appear first in the callback compound RPC. If it is not the first operation NFS4ERR_SEQUENCE_POS must be returned. If the first operation ni the CB_COMPOUND is not CB_SEQUENCE then NFS4ERR_OP_NOT_IN_SESSION must be returned. Signed-off-by:
-
Benny Halevy authored
[nfs41: get rid of READMEM and COPYMEM for callback_xdr.c] Signed-off-by:
-
Benny Halevy authored
Currently, just free up any referring calls information. Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
Note that this patch changes the nfsv4.0 behavior also when CONFIG_NFS_V4_1 is not defined where NFS4ERR_MINOR_VERS_MISMATCH will be returned if the client received a CB_COMPOUND with minorversion != 0. Previously, it would have returned NFS4ERR_OP_ILLEGAL for CB_SEQUENCE. (or if the server is broken and sent OP_CB_GETATTR or OP_CB_RECALL with minorversion!=0, they would have been processed normally. Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
decode cb_compound header conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Get rid of cb_compound_hdr_arg.callback_ident callback_ident is not used anywhere so we shouldn't waste any memory to store it. Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Andy Adamson authored
Frees the preallocated backchannel resources that are associated with this session when the session is destroyed. A backchannel is currently created once per session. Destroy the backchannel only when the session is destroyed. Signed-off-by:
-
Rahul Iyer authored
Obtain the rpc_xprt from the rpc_rqst so that calls and callback replies can both use the same code path. A client needs the rpc_xprt in order to reply to a callback. Signed-off-by:
Rahul Iyer <iyer@netapp.com> Signed-off-by:
-
Andy Adamson authored
Set the SESSION4_BACK_CHAN flag to indicate the client supports a backchannel. Signed-off-by:
-
Andy Adamson authored
The NFS v4.1 callback service has already been setup, and rpc_xprt->serv points to the svc_serv structure describing it. Invoke the xprt_setup_backchannel() initialization to pre- allocate the necessary backchannel structures. Signed-off-by:
Alexandros Batsakis <Alexandros.Batsakis@netapp.com> Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Tracks the nfs_callback_info for both versions, enabling the callback service for v4 and v4.1 to run concurrently and be stopped independently of each other. Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Andy Adamson authored
This svc_xprt is passed on to the callback service thread to be later used to processes incoming svc_rqst's Signed-off-by: -
Benny Halevy authored
For nfs41 callbacks we need an svc_xprt to process requests coming up the backchannel socket as rpc_rqst's that are transformed into svc_rqst's that need a rq_xprt to be processed. The svc_{udp,tcp}_create methods are too heavy for this job as svc_create_socket creates an actual socket to listen on while for nfs41 we're "reusing" the fore channel's socket. Signed-off-by: -
Ricardo Labiaga authored
nfs41_callback_up() initializes the necessary queues and creates the new nfs41_callback_svc thread. This thread executes the callback service which waits for requests to arrive on the svc_serv->sv_cb_list. NFS41_BC_MIN_CALLBACKS is set to 1 because we expect callbacks to not cause substantial latency. The actual processing of the callback will be implemented as a separate patch. There is only one NFSv4.1 callback service. The first caller of nfs4_callback_up() creates the service, subsequent callers increment a reference count on the service. The service is destroyed when the last caller invokes nfs_callback_down(). The transport needs to hold a reference to the callback service in order to invoke it during callback processing. Currently this reference is only obtained when the service is first created. This is incorrect, since subsequent registrations for other transports will leave the xprt->serv pointer uninitialized, leading to an oops when a callback arrives on the "unreferenced" transport. This patch fixes the problem by ensuring that a reference to the service is saved in xprt->serv, either because the service is created by this invocation to nfs4_callback_up() or by a prior invocation. Signed-off-by:
-
Ricardo Labiaga authored
Implement the NFSv4.1 backchannel service. Invokes the common callback processing logic svc_process_common() to authenticate the call and dispatch the appropriate NFSv4.1 XDR decoder and operation procedure. It then invokes bc_send() to send the reply over the same connection. bc_send() is implemented in a separate patch. At this time there is no slot validation or reply cache handling. [nfs41: Preallocate rpc_rqst receive buffer for handling callbacks] Signed-off-by:
-
Ricardo Labiaga authored
net/sunrpc/svc.c:svc_process() is used by the NFSv4 callback service to process RPC requests arriving over connections initiated by the server. NFSv4.1 supports callbacks over the backchannel on connections initiated by the client. This patch refactors svc_process() so that common code can also be used by the backchannel. Signed-off-by:
-
Ricardo Labiaga authored
Executes the backchannel task on the RPC state machine using the existing open connection previously established by the client. Signed-off-by:
-
Ricardo Labiaga authored
Adds rpc_run_bc_task() which is called by the NFS callback service to process backchannel requests. It performs similar work to rpc_run_task() though "schedules" the backchannel task to be executed starting at the call_trasmit state in the RPC state machine. It also introduces some miscellaneous updates to the argument validation, call_transmit, and transport cleanup functions to take into account that there are now forechannel and backchannel tasks. Backchannel requests do not carry an RPC message structure, since the payload has already been XDR encoded using the existing NFSv4 callback mechanism. Introduce a new transmit state for the client to reply on to backchannel requests. This new state simply reserves the transport and issues the reply. In case of a connection related error, disconnects the transport and drops the reply. It requires the forechannel to re-establish the connection and the server to retransmit the request, as stated in NFSv4.1 section 2.9.2 "Client and Server Transport Behavior". Note: There is no need to loop attempting to reserve the transport. If EAGAIN is returned by xprt_prepare_transmit(), return with tk_status == 0, setting tk_action to call_bc_transmit. rpc_execute() will invoke it again after the task is taken off the sleep queue. [nfs41: rpc_run_bc_task() need not be exported outside RPC module] [nfs41: New call_bc_transmit RPC state] Signed-off-by:
-
Ricardo Labiaga authored
Handles RPC replies and backchannel callbacks. Traditionally the NFS client has expected only RPC replies on its open connections. With NFSv4.1, callbacks can arrive over an existing open connection. This patch refactors the old xs_tcp_read_request() into an RPC reply handler: xs_tcp_read_reply(), a new backchannel callback handler: xs_tcp_read_callback(), and a common routine to read the data off the transport: xs_tcp_read_common(). The new xs_tcp_read_callback() queues callback requests onto a queue where the callback service (a separate thread) is listening for the processing. This patch incorporates work and suggestions from Rahul Iyer (iyer@netapp.com) and Benny Halevy (bhalevy@panasas.com). xs_tcp_read_callback() drops the connection when the number of expected callbacks is exceeded. Use xprt_force_disconnect(), ensuring tasks on the pending queue are awaken on disconnect. [nfs41: Keep track of RPC call/reply direction with a flag] [nfs41: Preallocate rpc_rqst receive buffer for handling callbacks] Signed-off-by:
-
Ricardo Labiaga authored
Contains prototype for backchannel helper routines. Signed-off-by:
-
Ricardo Labiaga authored
This patch introduces support to setup the callback xprt on the client side. It allocates/ destroys the preallocated memory structures used to process backchannel requests. At setup time, xprt_setup_backchannel() is invoked to allocate one or more rpc_rqst structures and substructures. This ensures that they are available when an RPC callback arrives. The rpc_rqst structures are maintained in a linked list attached to the rpc_xprt structure. We keep track of the number of allocations so that they can be correctly removed when the channel is destroyed. When an RPC callback arrives, xprt_alloc_bc_request() is invoked to obtain a preallocated rpc_rqst structure. An rpc_xprt structure is returned, and its RPC_BC_PREALLOC_IN_USE bit is set in rpc_xprt->bc_flags. The structure is removed from the the list since it is now in use, and it will be later added back when its user is done with it. After the RPC callback replies, the rpc_rqst structure is returned by invoking xprt_free_bc_request(). This clears the RPC_BC_PREALLOC_IN_USE bit and adds it back to the list, allowing it to be reused by a subsequent RPC callback request. To be consistent with the reception of RPC messages, the backchannel requests should be placed into the 'struct rpc_rqst' rq_rcv_buf, which is then in turn copied to the 'struct rpc_rqst' rq_private_buf. [nfs41: Preallocate rpc_rqst receive buffer for handling callbacks] Signed-off-by:
-
Ricardo Labiaga authored
Signed-off-by:
-
Ricardo Labiaga authored
Adds new list of rpc_xprt structures, and a readers/writers lock to protect the list. The list is used to preallocate resources for the backchannel during backchannel requests. Callbacks are not expected to cause significant latency, so only one callback will be allowed at this time. It also adds a pointer to the NFS callback service so that requests can be directed to it for processing. New callback members added to svc_serv. The NFSv4.1 callback service will sleep on the svc_serv->svc_cb_waitq until new callback requests arrive. The request will be queued in svc_serv->svc_cb_list. This patch adds this list, the sleep queue and spinlock to svc_serv. [nfs41: NFSv4.1 callback support] Signed-off-by:
-
Benny Halevy authored
move nfs4_init_callback into nfs4_init_client_minor_version and nfs4_destroy_callback into nfs4_clear_client_minor_version as these need to happen also when auto-negotiating the minorversion once the callback service for nfs41 becomes different than for nfs4.0 Signed-off-by:
-
Benny Halevy authored
Refactor-out code to bring the callback service up and down. Signed-off-by: -
Ricardo Labiaga authored
Reading and storing the RPC direction is a three step process. 1. xs_tcp_read_calldir() reads the RPC direction, but it will not store it in the XDR buffer since the 'struct rpc_rqst' is not yet available. 2. The 'struct rpc_rqst' is obtained during the TCP_RCV_COPY_DATA state. This state need not necessarily be preceeded by the TCP_RCV_READ_CALLDIR. For example, we may be reading a continuation packet to a large reply. Therefore, we can't simply obtain the 'struct rpc_rqst' during the TCP_RCV_READ_CALLDIR state and assume it's available during TCP_RCV_COPY_DATA. This patch adds a new TCP_RCV_READ_CALLDIR flag to indicate the need to read the RPC direction. It then uses TCP_RCV_COPY_CALLDIR to indicate the RPC direction needs to be saved after the 'struct rpc_rqst' has been allocated. 3. The 'struct rpc_rqst' is obtained by the xs_tcp_read_data() helper functions. xs_tcp_read_common() then saves the RPC direction in the XDR buffer if TCP_RCV_COPY_CALLDIR is set. This will happen when we're reading the data immediately after the direction was read. xs_tcp_read_common() then clears this flag. [was nfs41: Skip past the RPC call direction] Signed-off-by:
-
Ricardo Labiaga authored
NFSv4.1 callbacks can arrive over an existing connection. This patch adds the logic to read the RPC call direction (call or reply). It does this by updating the state machine to look for the call direction invoking xs_tcp_read_calldir(...) after reading the XID. [nfs41: Keep track of RPC call/reply direction with a flag] As per 11/14/08 review of RFC 53/85. Add a new flag to track whether the incoming message is an RPC call or an RPC reply. TCP_RPC_REPLY is set in the 'struct sock_xprt' tcp_flags in xs_tcp_read_calldir() if the message is an RPC reply sent on the forechannel. It is cleared if the message is an RPC request sent on the back channel. Signed-off-by:
-
Benny Halevy authored
Unlike minorversion0, in nfsv4.1 the open and lock seqids need not be incremented by the client and should always be set to zero. This is implemented using a new nfs_rpc_ops methods - increment_open_seqid and increment_lock_seqid Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Stops an infinite loop of EXCHANGE_ID. Signed-off-by:
-
Benny Halevy authored
This creates the nfsv4.1 session on mount. Signed-off-by:
-
Andy Adamson authored
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search for credentials other than the machine credential. Signed-off-by:
-
