This patch simplifies and speeds up TIPC's algorithm for identifying
on-node and off-node destinations that overlap a multicast name
sequence range.  Rather than traversing the list of all known name
publications within the cluster, it now traverses the (potentially
much shorter) list of name publications made by the node itself, and
determines if any off-node destinations exist by comparing the sizes
of the two lists.  (Since the node list must be a subset of the
cluster list, a difference in sizes means that at least one off-node
destination must exist.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensures that TIPC configuration commands that display info
about neighboring nodes and their links take the spinlocks that
protect the node list and link lists from changing while the lists
are being traversed.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensures that TIPC's multicast message name lookup
algorithm does individualized scope checking for each published
name it examines.  Previously, scope checking was only done for
the first name in a name table publication list, which could
result in incoming multicast messages being delivered to ports
publishing names with "node" scope, or not being delivered to
ports publishing names with "cluster" or "zone" scope.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch corrects many places where TIPC routines indicated
successful completion by returning TIPC_OK instead of 0.
(The TIPC_OK symbol has the value 0, but it should only be used
in contexts that deal with the error code field of a TIPC
message header.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensurs that accept() returns successfully even when
the newly created socket is immediately disconnected by its peer.
Previously, accept() would fail if it was unable to pass back
the optional address info for the socket's peer before the
socket became disconnected; TIPC now allows accept() to gather
peer address information after disconnection.  As a bonus, the
revised code accesses the socket's port more efficiently, without
the overhead incurred by a reference table lookup.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch eliminates an unnecessary pointer dereference when
accessing a stream-based socket's receive queue.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch eliminates an unneeded parameter when creating a low-level
TIPC port object.  Instead of returning both the pointer to the port
structure and the port's reference ID, it now returns only the pointer
since the port structure contains the reference ID as one of its fields.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@braodcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring secondary unicast addresses.  There
are 4 additional perfect match filters which can be used for
secondary unicast address support.

  *  Modified bnx2_set_mac_addr() to be more generic in handling
     the setting of the perfect match filters
  *  Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Negotiate with boot code and ASF firmware to see if it can
support keeping VLAN tags in the RX packets.  If supported
by firmware, the VLAN tag will be kept in the RX packet
unless VLAN acceleration is registered.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ack=1 means wait for firmware acknowledgement, and ack=0
means don't wait.  All current callers will set it to 1.

In the next patch, new calls will set ack=0.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <Benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device may be in D3-hot state and may crash if we try to
configure the speed settings by accessing the registers.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we are trying to place the information from the kernel to
1, 2, 3 and 4 pages sequentially. These pages are allocated via slab.
Though, from the slab point of view steps 3 and 4 are equivalent on
most architectures. So, lets skip 3 pages attempt.

By the way, should we switch from .doit to .dumpit interface here?
The amount of data seems quite big for me.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes references in drivers/net/wan/Kconfig and
net/wanrouter/Kconfig to Documentation/networking/wan-router.txt
which was removed in commit 99971e70
("[WANPIPE]: Forgotten bits of Sangoma drivers removal.").
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Please see the following thread to get some context on this
	http://marc.info/?l=linux-netdev&m=121564433018903&w=2

Basically the issue is that current multi-cast filtering stuff in
the TUN/TAP driver is seriously broken.
Original patch went in without proper review and ACK. It was broken and
confusing to start with and subsequent patches broke it completely.
To give you an idea of what's broken here are some of the issues:

- Very confusing comments throughout the code that imply that the
character device is a network interface in its own right, and that packets
are passed between the two nics. Which is completely wrong.

- Wrong set of ioctls is used for setting up filters. They look like
shortcuts for manipulating state of the tun/tap network interface but
in reality manipulate the state of the TX filter.

- ioctls that were originally used for setting address of the the TX filter
got "fixed" and now set the address of the network interface itself. Which
made filter totaly useless.

- Filtering is done too late. Instead of filtering early on, to avoid
unnecessary wakeups, filtering is done in the read() call.

The list goes on and on :)

So the patch cleans all that up. It introduces simple and clean interface for
setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering
before enqueuing the packets.

TX filtering is useful in the scenarios where TAP is part of a bridge, in
which case it gets all broadcast, multicast and potentially other packets when
the bridge is learning. So for example Ethernet tunnelling app may want to
setup TX filters to avoid tunnelling multicast traffic. QEMU and other
hypervisors can push RX filtering that is currently done in the guest into the
host context therefore saving wakeups and unnecessary data transfer.
Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check all positive increment for promiscuity and allmulti
to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

An oops happens during device unregister.

The following oops happened when I add two tunnels, which
use a same device, and then delete one tunnel.
Obviously deleting tunnel "A" causes device unregister, which
send a notification, and after receiving notification, ipmr do
unregister again for tunnel "B" which also use same device.
That is wrong.
After receiving notification, ipmr only needs to decrease reference
count and don't do duplicated unregister.
Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean.

This patch fixs:
- unregister device oops
- using after dev_put()

Here is the oops:
===
Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------
Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651!
Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1] 
Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Jul 11 15:39:29 wangchen kernel: 
Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69)
Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0
Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3
Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff
Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c
Jul 11 15:39:29 wangchen kernel:  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000)
Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360 
Jul 11 15:39:29 wangchen kernel:        c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000 
Jul 11 15:39:29 wangchen kernel:        00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000 
Jul 11 15:39:29 wangchen kernel: Call Trace:
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0284e4c>] ipmr_device_event+0x1e/0x30
Jul 11 15:39:29 wangchen kernel:  [<c029a819>] notifier_call_chain+0x2a/0x47
Jul 11 15:39:29 wangchen kernel:  [<c012841b>] raw_notifier_call_chain+0x9/0xc
Jul 11 15:39:29 wangchen kernel:  [<c024639f>] rollback_registered+0x95/0xe3
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c01727c4>] __find_get_block_slow+0xda/0xe4
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c0263501>] ip_setsockopt+0xa9/0x9ee
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c0116434>] __wake_up+0xf/0x15
Jul 11 15:39:29 wangchen kernel:  [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c014291e>] get_page_from_freelist+0x94/0x369
Jul 11 15:39:29 wangchen kernel:  [<c01408f2>] filemap_fault+0x1ac/0x2fe
Jul 11 15:39:29 wangchen kernel:  [<c01a605e>] security_sk_alloc+0xd/0xf
Jul 11 15:39:29 wangchen kernel:  [<c023edea>] sk_prot_alloc+0x36/0x78
Jul 11 15:39:29 wangchen kernel:  [<c0240037>] sk_alloc+0x3a/0x40
Jul 11 15:39:29 wangchen kernel:  [<c0276062>] raw_hash_sk+0x46/0x4e
Jul 11 15:39:29 wangchen kernel:  [<c0166aff>] d_alloc+0x1b/0x157
Jul 11 15:39:29 wangchen kernel:  [<c023e4d1>] sock_common_setsockopt+0x12/0x16
Jul 11 15:39:29 wangchen kernel:  [<c023cb1e>] sys_setsockopt+0x6f/0x8e
Jul 11 15:39:29 wangchen kernel:  [<c023e105>] sys_socketcall+0x15c/0x19e
Jul 11 15:39:29 wangchen kernel:  [<c0103611>] sysenter_past_esp+0x6a/0x99
Jul 11 15:39:29 wangchen kernel:  [<c0290000>] unix_poll+0x69/0x78
Jul 11 15:39:29 wangchen kernel:  =======================
Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0 
Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c
Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]---
===
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Patrick McHardy pointed it out.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net> 
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for promiscuity to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In bond_alb and bond_main, we check all positive increment for promiscuity
and allmulti to get error return.
But there are still two problems left.
1. Some code path has no mechanism to signal errors upstream.
2. If there are multi slaves, it's hard to tell which slaves increment
   promisc/allmulti successfully and which failed.
So I left these problems to be FIXME.
Fortunately, the overflow is very rare case.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.  Commit: "netdevice: Fix
promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In af_packet, we check all positive increment for promiscuity and
allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net> 
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	net/netfilter/nf_conntrack_proto_tcp.c

Signed-off-by: David S. Miller <davem@davemloft.net>

According to the legacy drivers the LED association status
must be reset after the firmware has been uploaded to the
hardware.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is a small fix to change the idx type from int to unsigned.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch fixes LEDs problem for 3945.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch fixes the problem that TXPOWER command is not sent
after we issue a new RXON command which requires a tune. Otherwise
we won't be able to Tx any frames.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch enables active scan on active channels.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch unifies 4965 and 5000 scanning code.

We increases the version number to 1.3.27. Since new uCode
iwlwifi-4965-2.ucode is required for 4965 cards.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch makes correct usage of the LED blink table.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes LED stall. last_blink_time was updated only if LED command
was sent, causing wrong computation of the througput.
Some code cleanup comes with this patch as well
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch asks to allocate the correct amount of sw queues according
to hw ampdu queues number.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>