- 11 May, 2009 2 commits
-
-
Tejun Heo authored
rq->sector is set to the tape->first_frame but it's never actually used and not even in the correct unit (512 byte sectors). Don't set it. [ Impact: cleanup ] Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Borislav Petkov <petkovbb@gmail.com> Acked-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
Tejun Heo authored
There's no reason to clear rq->sector and nr_sectors after calling blk_rq_init(). They're guaranteed to be clear. Drop unnecessary clearing. [ Impact: cleanup ] Signed-off-by:
-
- 28 Apr, 2009 38 commits
-
-
Bartlomiej Zolnierkiewicz authored
While at it: - remove MG_REG_HEAD_MUST_BE_ON define - remove MG_REG_CTRL_INTR_ENABLE define - remove MG_REG_HEAD_LBA_MODE define - remove unused defines Cc: unsik Kim <donari75@gmail.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Add local copies of ata_id_string() and ata_id_c_string() to mg_disk so there is no need for the driver to depend on ATA and SCSI. [ Impact: break dependency on libata by copying ata id string functions ] Cc: unsik Kim <donari75@gmail.com> Signed-off-by:
-
Tejun Heo authored
mg_disk implements its own partial completion. Convert to standard block layer partial completion. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
include/linux/mg_disk.h is used only by drivers/block/mg_disk.c. No reason to put it in a separate header. Fold it into mg_disk.c. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
swim curiously tries to update request parameters before calling __blk_end_request() when __blk_end_request() will do it anyway and unnecessarily checks whether current_nr_sectors is zero right after fetching. Drop unnecessary stuff and use standard block layer mechanisms. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
swim3 curiously tries to update request parameters before calling __blk_end_request() when __blk_end_request() will do it anyway, and it updates request for partial completion manually instead of using blk_update_request(). Also, it does some spurious checks on rq such as testing whether rq->sector is negative or current_nr_sectors is zero right after fetching. Drop unnecessary stuff and use standard block layer mechanisms. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
hd read/write_intr() functions manually manipulate request to incrementally complete it, which block layer already supports. Simply use block layer completion routines instead of manual partial completion. While at it, clear unnecessary elv_next_request() check at the tail of read_intr(). This also makes read and write_intr() more consistent. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
ubd curiously updates rq->sector while issuing the request in multiple pieces. Don't do it and simply use local copy of sector. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
ubd had its own block request partial completion mechanism, which is unnecessary as block layer already does it. Kill ubd_end_request() and ubd_finish() and replace them with direct call to blk_end_request(). [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
vdc_end_request() is a thin silly wrapper on top of __blk_end_request(). Kill it. [ Impact: cleanup ] Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tejun Heo authored
ps3disk_interrupt() always completes requests fully but it uses rq->hard_cur_sectors for FLUSH requests for some reason. Drop them and simply use __blk_end_request_all(). [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
rq_data_dir() can only be READ or WRITE and rq->sector and nr_sectors are always automatically updated after partial request completion. Don't worry about rq_data_dir() not being either READ or WRITE or manually update sector and nr_sectors. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
blk_get_request() always returns properly zeroed requests. Don't set fields to zero/NULL unnecessarily. [ Impact: cleanup ] Signed-off-by:
-
Tejun Heo authored
In the process of mindlessly copying [__]blk_end_request_all(), [__]blk_end_request_cur() ended up returning void even though they're partial completion functions. Fix it. [ Impact: fix braindead API ] Signed-off-by:
-
Nikanth Karthikesan authored
Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Signed-off-by:
-
Jens Axboe authored
We currently don't do merging on discard requests, but we potentially could. If we do, then we need to include discard requests in the IO accounting, or merging would end up decrementing in_flight IO counters for an IO which never incremented them. So enable accounting for discard requests. Problem found by Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: -
Jens Axboe authored
We currently check for file system requests outside of blk_do_io_stat(rq), but we may as well just include it. Signed-off-by: -
Tejun Heo authored
Now that all block request data transfer is done via bio, rq->data isn't used. Kill it. While at it, make the roles of rq->special and buffer clear. [ Impact: drop now unncessary field from struct request ] Signed-off-by: -
Tejun Heo authored
omap mailbox uses rq->data as the second opaque pointer to carry mbox_msg_t and rq->special message argument which is needed only for tx. Add and use omap_msg_tx_data struct for tx and use rq->special for mbox_msg_t for rx such that only rq->special is used as opaque pointer. [ Impact: cleanup rq->data usage, extra kmalloc in msg_send ] Signed-off-by: -
Tejun Heo authored
end_request() has been kept around for backward compatibility; however, it's about time for it to go away. * There aren't too many users left. * Its use of @updtodate is pretty confusing. * In some cases, newer code ends up using mixture of end_request() and [__]blk_end_request[_all](), which is way too confusing. So, add [__]blk_end_request_cur() and replace end_request() with it. Most conversions are straightforward. Noteworthy ones are... * paride/pcd: next_request() updated to take 0/-errno instead of 1/0. * paride/pf: pf_end_request() and next_request() updated to take 0/-errno instead of 1/0. * xd: xd_readwrite() updated to return 0/-errno instead of 1/0. * mtd/mtd_blkdevs: blktrans_discard_request() updated to return 0/-errno instead of 1/0. Unnecessary local variable res initialization removed from mtd_blktrans_thread(). [ Impact: cleanup ] Signed-off-by:
Joerg Dorchain <joerg@dorchain.net> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
Laurent Vivier <Laurent@lvivier.info> Cc: Tim Waugh <tim@cyberelk.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: unsik Kim <donari75@gmail.com>
-
Tejun Heo authored
There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: -
Tejun Heo authored
rq->start_time was initialized in init_request_from_bio() so special requests didn't have start_time set. This has been okay as start_time has been used only for fs requests; however, there is no indication of this actually is the case or not. Set rq->start_time in blk_rq_init() and guarantee that all initialized rq's have its start_time set. This improves consistency at virtually no cost and future changes will make use of the timestamp for !bio requests. [ Impact: rq->start_time is valid for all requests ] Signed-off-by: -
Tejun Heo authored
Request completion has gone through several changes and became a bit messy over the time. Clean it up. 1. end_that_request_data() is a thin wrapper around end_that_request_data_first() which checks whether bio is NULL before doing anything and handles bidi completion. blk_update_request() is a thin wrapper around end_that_request_data() which clears nr_sectors on the last iteration but doesn't use the bidi completion. Clean it up by moving the initial bio NULL check and nr_sectors clearing on the last iteration into end_that_request_data() and renaming it to blk_update_request(), which makes blk_end_io() the only user of end_that_request_data(). Collapse end_that_request_data() into blk_end_io(). 2. There are four visible completion variants - blk_end_request(), __blk_end_request(), blk_end_bidi_request() and end_request(). blk_end_request() and blk_end_bidi_request() uses blk_end_request() as the backend but __blk_end_request() and end_request() use separate implementation in __blk_end_request() due to different locking rules. blk_end_bidi_request() is identical to blk_end_io(). Collapse blk_end_io() into blk_end_bidi_request(), separate out request update into internal helper blk_update_bidi_request() and add __blk_end_bidi_request(). Redefine [__]blk_end_request() as thin inline wrappers around [__]blk_end_bidi_request(). 3. As the whole request issue/completion usages are about to be modified and audited, it's a good chance to convert completion functions return bool which better indicates the intended meaning of return values. 4. The function name end_that_request_last() is from the days when it was a public interface and slighly confusing. Give it a proper internal name - blk_finish_request(). 5. Add description explaning that blk_end_bidi_request() can be safely used for uni requests as suggested by Boaz Harrosh. The only visible behavior change is from #1. nr_sectors counts are cleared after the final iteration no matter which function is used to complete the request. I couldn't find any place where the code assumes those nr_sectors counters contain the values for the last segment and this change is good as it makes the API much more consistent as the end result is now same whether a request is completed using [__]blk_end_request() alone or in combination with blk_update_request(). API further cleaned up per Christoph's suggestion. [ Impact: cleanup, rq->*nr_sectors always updated after req completion ] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org>
-
Tejun Heo authored
With recent IDE updates, blk_end_request_callback() doesn't have any user now. Kill it. [ Impact: removal of unused convoluted interface ] Signed-off-by: -
Tejun Heo authored
Impact: code reorganization elv_next_request() and elv_dequeue_request() are public block layer interface than actual elevator implementation. They mostly deal with how requests interact with block layer and low level drivers at the beginning of rqeuest processing whereas __elv_next_request() is the actual eleveator request fetching interface. Move the two functions to blk-core.c. This prepares for further interface cleanup. Signed-off-by: -
Tejun Heo authored
Reorder request completion functions such that * All request completion functions are located together. * Functions which are used by only one caller is put right above the caller. * end_request() is put after other completion functions but before blk_update_request(). This change is for completion function cleanup which will follow. [ Impact: cleanup, code reorganization ] Signed-off-by: -
Tejun Heo authored
* In blk_rq_timed_out_timer(), else { if } to else if * In blk_add_timer(), simplify if/else block [ Impact: cleanup ] Signed-off-by: -
Tejun Heo authored
blk_insert_request() doesn't need to worry about REQ_SOFTBARRIER. Don't set it. Combined with recent ide updates, REQ_SOFTBARRIER is now only used in elevator proper and for discard requests. [ Impact: cleanup ] Signed-off-by: -
Tejun Heo authored
RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't mergeable. There is no reason to specify it superflously. It only adds to confusion. Don't set REQ_NOMERGE for barriers and requests with specific queueing directive. REQ_NOMERGE is now exclusively used by the merging code. [ Impact: cleanup ] Signed-off-by: -
Tejun Heo authored
blk_start_queueing() is identical to __blk_run_queue() except that it doesn't check for recursion. None of the current users depends on blk_start_queueing() running request_fn directly. Replace usages of blk_start_queueing() with [__]blk_run_queue() and kill it. [ Impact: removal of mostly duplicate interface function ] Signed-off-by: -
Tejun Heo authored
__blk_run_queue wraps blk_invoke_request_fn() such that it additionally removes plug and bails out early if the queue is empty. Both extra operations have their own pending mechanisms and don't cause any harm correctness-wise when they are done superflously. The only user of blk_invoke_request_fn() being blk_start_queue(), there isn't much reason to keep both functions around. Merge blk_invoke_request_fn() into __blk_run_queue() and make blk_start_queue() use __blk_run_queue() instead. [ Impact: merge two subtly different internal functions ] Signed-off-by: -
Jeff Moyer authored
Doing a proper block dev ->readpages() speeds up the crazy dump(8) approach of using interleaved process IO. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Enable by default support for large devices and files (CONFIG_LBD): - With 1TB disks being a commodity hardware it is quite easy to hit 2TB limitation while building RAIDs etc. and many distros have been using CONFIG_LBD=y by default already (at least Fedora 10 and openSUSE 11.1). - This should also prevent a subtle ext4 filesystem compatibility issue: mke2fs.ext4 defaults to creating filesystems with huge_files feature enabled and such filesystems cannot be later mounted read-write on machines with CONFIG_LBD=n (it should be quite easy to hit this issue when trying to use filesystem created using distro kernel on system running the self-build kernel, think about USB disk enclosures & co.). While at it: - Clarify config option help text w.r.t. mounting ext4 filesystems (they can be mounted with CONFIG_LBD=n but in the read-only mode). Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Tejun Heo authored
Impact: drop unnecessary code Now that everything uses bio and block operations, there is no need to reset request fields manually when retrying a request. Every field is guaranteed to be always valid. Drop unnecessary request field resetting from ide_dma_timeout_retry(). Signed-off-by: -
Tejun Heo authored
Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: -
Tejun Heo authored
Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: -
Tejun Heo authored
Impact: cleanup idetape_chrdev_read/write() functions are unnecessarily complex when everything can be handled in a single loop. Collapse idetape_add_chrdev_read/write_request() into the rw functions and simplify the implementation. Signed-off-by: -
Tejun Heo authored
Impact: cleanup Byte size is what most issue functions deal with, make idetape_queue_rw_tail() and its wrappers take byte size instead of sector counts. idetape_chrdev_read() and write() functions are converted to use tape->buffer_size instead of ctl from tape->cap. This cleans up code a little bit and will ease the next r/w reimplementation. Signed-off-by:
-
