- 15 Sep, 2016 7 commits
-
-
Linus Torvalds authored
It was a nice optimization while it lasted, but thread_info is moving and this optimization will no longer work. Quoting Linus: Oh Gods, Andy. That pt_regs_to_thread_info() thing made me want to do unspeakable acts on a poor innocent wax figure that looked _exactly_ like you. [ Changelog written by Andy. ] Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/6376aa81c68798cc81631673f52bd91a3e078944.1473801993.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Andy Lutomirski authored
Because sched.h and thread_info.h are a tangled mess, I turned in_compat_syscall() into a macro. If we had current_thread_struct() or similar and we could use it from thread_info.h, then this would be a bit cleaner. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Josh Poimboeuf authored
in_exception_stack() has some recursion checking which makes sure the stack trace code never traverses a given exception stack more than once. This prevents an infinite loop if corruption somehow causes a stack's "next stack" pointer to point to itself (directly or indirectly). The recursion checking can be useful for other stacks in addition to the exception stack, so extend it to work for all stacks. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/95de5db4cfe111754845a5cef04e20630d01423f.1473905218.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
When an interrupt happens in entry code while running on a software IRQ stack, and the IRQ stack was empty, regs->sp will contain the stack end address (e.g., irq_stack_ptr). If the regs are passed to dump_trace(), get_stack_info() will report STACK_TYPE_UNKNOWN, causing dump_trace() to return prematurely without trying to go to the next stack. Update the bounds checking for software interrupt stacks so that the ending address is now considered part of the stack. This means that it's now possible for the 'walk_stack' callbacks -- print_context_stack() and print_context_stack_bp() -- to be called with an empty stack. But that's fine; they're already prepared to deal with that due to their on_stack() checks. Signed-off-by:
-
Josh Poimboeuf authored
valid_stack_ptr() is buggy: it assumes that all stacks are of size THREAD_SIZE, which is not true for exception stacks. So the walk_stack() callbacks will need to know the location of the beginning of the stack as well as the end. Another issue is that in general the various features of a stack (type, size, next stack pointer, description string) are scattered around in various places throughout the stack dump code. Encapsulate all that information in a single place with a new stack_info struct and a get_stack_info() interface. Signed-off-by:
-
Josh Poimboeuf authored
in_exception_stack() does some bad, bad things just so the unwinder can print different values for different areas of the debug exception stack. There's no need to clarify where exactly on the stack it is. Just print "#DB" and be done with it. Signed-off-by:
-
- 14 Sep, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Here are two changes for v4.8. The first fixes a "[Firmware Bug]: reg 0x10: invalid BAR (can't size)" warning on Haswell, and the second fixes a problem in some new runtime suspend functionality we merged for v4.8. Summary: Enumeration: Mark Haswell Power Control Unit as having non-compliant BARs (Bjorn Helgaas) Power management: Fix bridge_d3 update on device removal (Lukas Wunner)" * tag 'pci-v4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix bridge_d3 update on device removal PCI: Mark Haswell Power Control Unit as having non-compliant BARs -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull uaccess fixes from Al Viro: "Fixes for broken uaccess primitives - mostly lack of proper zeroing in copy_from_user()/get_user()/__get_user(), but for several architectures there's more (broken clear_user() on frv and strncpy_from_user() on hexagon)" * 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits) avr32: fix copy_from_user() microblaze: fix __get_user() microblaze: fix copy_from_user() m32r: fix __get_user() blackfin: fix copy_from_user() sparc32: fix copy_from_user() sh: fix copy_from_user() sh64: failing __get_user() should zero score: fix copy_from_user() and friends score: fix __get_user/get_user s390: get_user() should zero on failure ppc32: fix copy_from_user() parisc: fix copy_from_user() openrisc: fix copy_from_user() nios2: fix __get_user() nios2: copy_from_user() should zero the tail of destination mn10300: copy_from_user() should zero on access_ok() failure... mn10300: failing __get_user() and get_user() should zero mips: copy_from_user() must zero the destination on access_ok() failure ARC: uaccess: get_user to zero out dest in cause of fault ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen regression fix from David Vrabel: "Fix SMP boot in arm guests" * tag 'for-linus-4.8b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: fix SMP guests boot
-
Josh Poimboeuf authored
show_stack_log_lvl() and dump_trace() are already preemption safe: - If they're running in irq or exception context, preemption is already disabled and the percpu stack pointers can be trusted. - If they're running with preemption enabled, they must be running on the task stack anyway, so it doesn't matter if they're comparing the stack pointer against a percpu stack pointer from this CPU or another one: either way it won't match. Signed-off-by:
-
Vitaly Kuznetsov authored
Commit 88e957d6 ("xen: introduce xen_vcpu_id mapping") broke SMP ARM guests on Xen. When FIFO-based event channels are in use (this is the default), evtchn_fifo_alloc_control_block() is called on CPU_UP_PREPARE event and this happens before we set up xen_vcpu_id mapping in xen_starting_cpu. Temporary fix the issue by setting direct Linux CPU id <-> Xen vCPU id mapping for all possible CPUs at boot. We don't currently support kexec/kdump on Xen/ARM so these ids always match. In future, we have several ways to solve the issue, e.g.: - Eliminate all hypercalls from CPU_UP_PREPARE, do them from the starting CPU. This can probably be done for both x86 and ARM and, if done, will allow us to get Xen's idea of vCPU id from CPUID/MPIDR on the starting CPU directly, no messing with ACPI/device tree required. - Save vCPU id information from ACPI/device tree on ARM and use it to initialize xen_vcpu_id mapping. This is the same trick we currently do on x86. Reported-by:
Julien Grall <julien.grall@arm.com> Tested-by:
Wei Chen <Wei.Chen@arm.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
- 13 Sep, 2016 28 commits
-
-
Al Viro authored
really ugly, but apparently avr32 compilers turns access_ok() into something so bad that they want it in assembler. Left that way, zeroing added in inline wrapper. Cc: stable@vger.kernel.org Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
It could be done in exception-handling bits in __get_user_b() et.al., but the surgery involved would take more knowledge of sh64 details than I have or _want_ to have. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
* should zero on any failure * __get_user() should use __copy_from_user(), not copy_from_user() Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
should clear on access_ok() failures. Also remove the useless range truncation logics. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
... that should zero on faults. Also remove the <censored> helpful logics wrt range truncation copied from ppc32. Where it had ever been needed only in case of copy_from_user() *and* had not been merged into the mainline until a month after the need had disappeared. A decade before openrisc went into mainline, I might add... Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
a) should not leave crap on fault b) should _not_ require access_ok() in any cases. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Vineet Gupta authored
Al reported potential issue with ARC get_user() as it wasn't clearing out destination pointer in case of fault due to bad address etc. Verified using following | { | u32 bogus1 = 0xdeadbeef; | u64 bogus2 = 0xdead; | int rc1, rc2; | | pr_info("Orig values %x %llx\n", bogus1, bogus2); | rc1 = get_user(bogus1, (u32 __user *)0x40000000); | rc2 = get_user(bogus2, (u64 __user *)0x50000000); | pr_info("access %d %d, new values %x %llx\n", | rc1, rc2, bogus1, bogus2); | } | [ARCLinux]# insmod /mnt/kernel-module/qtn.ko | Orig values deadbeef dead | access -14 -14, new values 0 0 Reported-by:Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Al Viro authored
Cc: stable@vger.kernel.org Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
It's -EFAULT, not -1 (and contrary to the comment in there, __strnlen_user() can return 0 - on faults). Cc: stable@vger.kernel.org Acked-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
Al Viro authored
It should check access_ok(). Otherwise a bunch of places turn into trivially exploitable rootholes. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
* copy_from_user() on access_ok() failure ought to zero the destination * none of those primitives should skip the access_ok() check in case of small constant size. Cc: stable@vger.kernel.org Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Al Viro authored
both for access_ok() failures and for faults halfway through Cc: stable@vger.kernel.org Signed-off-by: -
Lukas Wunner authored
Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the port itself and its children satisfy a number of conditions. Once a child is removed, we recheck those conditions in case the removed device was blocking the port from suspending. The rechecking needs to happen *after* the device has been removed from the bus it resides on. Otherwise when walking the port's subordinate bus in pci_bridge_d3_update(), the device being removed would erroneously still be taken into account. However the device is removed from the bus_list in pci_destroy_dev() and we currently recheck *before* that. Fix it. Fixes: 9d26d3a8 ("PCI: Put PCIe ports into D3 during suspend") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Three fixes: - AMD microcode loading fix with randomization - an lguest tooling fix - and an APIC enumeration boundary condition fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix num_processors value in case of failure tools/lguest: Don't bork the terminal in case of wrong args x86/microcode/AMD: Fix load of builtin microcode with randomized memory
-
