1. 18 May, 2002 1 commit
  2. 17 May, 2002 19 commits
    • Linus Torvalds's avatar
      Merge bk://bkbits.ras.ucalgary.ca/rgooch-2.5 · fa82a1da
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      fa82a1da
    • Jens Axboe's avatar
      [PATCH] fix scsi oops on failed sg table allocation · 7dbe32be
      Jens Axboe authored
      This patch fixes the deliberate BUG_ON() on failed sgtable allocations.
      I left that in because I was too lazy to fix it at the time...
      
      Basically make scsi_init_io() return 0 on failure (like before) but this
      time allow us to recover. scsi_init_io() will end_request on a fatal
      condition. So now just mark the device/host as starved if needed, and
      leave the request at the front of the queue for next service.
      7dbe32be
    • Hirofumi Ogawa's avatar
      [PATCH] Fixed the handling of file name containing 0x05 on vfat · 76e4b1f8
      Hirofumi Ogawa authored
      This patch fixes the behavior of vfatfs when the file name contains 0x05.
      76e4b1f8
    • Neil Brown's avatar
      [PATCH] Micro Memory battery backed RAM card driver · 76e7b902
      Neil Brown authored
      New driver for Micro Memory NVRAM module
      
      This driver handles up to 16 PCI based NVRAM cards
      from MicroMemory.
      Each card appears like a block device, and can be partitioned
      using any standard partitioning tool.  Upto 15 partitions are
      supported.
      
      This driver needs its own major device number and so allocates
      one using register_blkdev.
      76e7b902
    • Linus Torvalds's avatar
      Merge http://gkernel.bkbits.net/net-drivers-2.5 · 096cbcc6
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      096cbcc6
    • Linus Torvalds's avatar
      Merge http://gkernel.bkbits.net/irda-2.5 · 760a916d
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      760a916d
    • Linus Torvalds's avatar
      Merge http://gkernel.bkbits.net/misc-2.5 · e752b6dd
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      e752b6dd
    • Martin Dalecki's avatar
      [PATCH] 2.5.15 IDE 64 · acff0d93
      Martin Dalecki authored
      Let's just get over with  this before queue handling will be targeted again...
      
      - Implement suggestions by Russell King for improved portability and separation
         between PCI and non PCI host code.
      
      - pdc202xxx updates from Thierry Vignaud.
      
      - Tiny PIO fix from Tomita.
      acff0d93
    • Martin Dalecki's avatar
      [PATCH] 2.5.15 IDE 63 · d7e09f7e
      Martin Dalecki authored
      - Propagate the queue handling changes to pmac as well.
      
      - Move set_transfer to ide-taskfile.c this is the only place where it's used
         and it can be made static there. Same applies to ide_ata66_check().
      
      - Move ide_auto_reduce_xfer to ide.c.
      
      - Make ide_cmd() local to the only place where it's used. Rename it to
         drive_cmd(). Don't pass drive_cmd_intr() as parameter.
      
      - Remove ide_next command completion type. Nobody is using it.
      
      - Move ide_do_drive_cmd to ide-taskfile. It's used there and in sub-drivers.
         Not in ide.c. The usage inside the device type drivers is entirely bogus
         inconsistent and so on...
      
      - Kill bogus IRQ masking code. The kernel is supposed to handle this properly.
         We should not try to work against possible bugs in the overall irq handling
         code. Wow this is increasing the systems overall responsibility by a
         significant margin.
      
      - Remove disfunctional pdcadma code. It is only misleading to the user.
      d7e09f7e
    • Martin Dalecki's avatar
      [PATCH] 2.5.15 IDE 62a · 5ff49f70
      Martin Dalecki authored
      - Streamline device detection reporting to always use ->slot_name.
      
      - Apply 64 bit sector size fixes to the overall code.
      
      - Push ->handler down to the struct ata_channel.
      
      - Introduce channel group based locking instead of a single global lock for all
         operations. There are still some places where we have preserved the ide_lock.
         We can't lock for queues during device probe and we protect global data
         structures during device registration and unregistration in ide.c with it.
      
      - Start replacement of serialized access to the registers of
         channels which share them with proper host chip driver specific locking.
         This affects the following host chip drivers:
      
         cmd640.c, rz1000, ... ?
      
         Seems some are setting the serialize flag just in case. So better let's do it
         gradually over time.
      
         Well, I still have to think whatever we really need to put channels sharing
         an IRQ line in the same locking group.
      
         From now on the sick concept of a hw group is gone now. We have full blown
         per channel request queues! Hopefully I will be able soon to get my hands on
         a dual Athlon machine to check how this all behaves on a multi SMP machine.
      
      - Move the whole SUPPORT_VLB_SYNC stuff to the only place where it is used: the
         pdc4030 host chip driver.  Eliminate it from the global driver part.
      
      - Eliminate pseudo portability macros from pdc4030. This is a host chip firmly
         based on VLB.
      5ff49f70
    • Martin Dalecki's avatar
      [PATCH] 2.5.15 IDE 61 · 938f5b72
      Martin Dalecki authored
      - Fix typo in pdc202xx driver.
      
      - Fix locking order in ioctl.
      
      - Fix wrong time_after usage introduced in 60. Maybe the fact I always get is
         wrong is related to the fact that I'm using the mouse with the left hand!?
      
      - Apply arch-clean-2 by Bartlomiej Zolnierkiewicz.
      
      - Don't disable interrupts during ide_wait_stat(). I see no reason too.
      
      - Push flags down from hwgroup to the ata_chaannel structure.
      
      - Apply small fixes from Franz Sirl to make AEC6280 working properly again.
      938f5b72
    • Robert Love's avatar
      [PATCH] clean up maximum priorities · 33f18d46
      Robert Love authored
      This patch further cleans up and separates the code in an effort to
      allow setting (a) a larger maximum real-time priority than default and
      (b) a maximum kernel RT priority that is separate than the maximum
      priority exported to user-space.
      33f18d46
    • Linus Torvalds's avatar
      Merge bk://linuxusb.bkbits.net/linus-2.5 · 38b60834
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      38b60834
    • Linus Torvalds's avatar
      Update kernel version · 0820be61
      Linus Torvalds authored
      0820be61
    • Linus Torvalds's avatar
      Cleanup munmap a lot. Fix Intel P4 TLB corruptions on SMP. · 5200ffe8
      Linus Torvalds authored
      Special thanks to Intel for support and traces.
      5200ffe8
    • Greg Kroah-Hartman's avatar
      [PATCH] USB - Host controller Config.in changes · ca65e31f
      Greg Kroah-Hartman authored
      - Commented out the usb-ohci driver.  This is part of the migration away from
        this driver, to the ohci-hcd driver.
      - Prevented the two UHCI_HCD drivers from both being compiled into the kernel
        at the same time.
      ca65e31f
    • Greg Kroah-Hartman's avatar
      [PATCH] USB - fix a compiler warning in the core code · 34cfabe1
      Greg Kroah-Hartman authored
      This removes a compiler warning due to my previous patch.
      34cfabe1
    • Greg Kroah-Hartman's avatar
      USB Config.in and Makefile fixups · 5b9eff91
      Greg Kroah-Hartman authored
      fixed up the Config.in and Makefile merge due to there being 2 uhci-hcd drivers added at once.
      5b9eff91
    • Georg Acher's avatar
      [PATCH] USB-UHCI-HCD · a96a4b53
      Georg Acher authored
      After maturing for more than a month, I decided that it's enough...
      So here's the patch for the HCD-version of usb-uhci, I called it
      usb-uhci-hcd. For me, the usual devices work (TM).
      
      Since the internals haven't changed much, I don't expect much difference to
      usb-uhci in functionality and performance.
      
      There is one major improvement: I've added a (preliminary) watchdog, that
      regularly checks whether UHCI interrupts are coming through. If they are
      "missing", ie. the HC halted without saying so, the HC is "re-animated" by a
      real and clean restart, which is (internally) equivalent to a module-reload.
      This is especially for VIA-chips which get comatose quite easily by babble
      or other incorrect transfers.
      
      The side effect is, of course, disconnects for all connected devices, but
      they re-appear after a few seconds and were dead before anyway. So keyboard
      and mouse work again, which is IMO a _very_ useful thing :-)
      
      Another point: The watchdog (currently with moderate 8 interrupts/s) detects
      IRQ-problems, so the misleading "device doesn't accept new device"-message
      is replaced by an immediate error.
      
      More comments and the separation into multiple files (I've taken ohci-hcd as
      an example) should make the code more concise...
      
      A few things are still on the todo-list and will come later:
      - A few watchdog modifications (fewer interrupts, better diagnostics)
      - Support for module "tune"-parameters for breadth/depth search, debug etc.
      - interval support for ISO
      - More SMP-tests
      - maybe changes for reference counting when it is clear what survives :-)
      a96a4b53
  3. 16 May, 2002 11 commits
    • Jeff Garzik's avatar
      Merge mandrakesoft.com:/home/jgarzik/vanilla/linus-2.5 · 2d46fcbe
      Jeff Garzik authored
      into mandrakesoft.com:/home/jgarzik/repo/misc-2.5
      2d46fcbe
    • Richard Gooch's avatar
      Merge atnf.csiro.au:/workaholix1/kernel/v2.5/linus · a68d9759
      Richard Gooch authored
      into atnf.csiro.au:/workaholix1/kernel/v2.5/rgooch-2.5
      a68d9759
    • Jeff Garzik's avatar
      Merge mandrakesoft.com:/home/jgarzik/vanilla/linus-2.5 · 6b537219
      Jeff Garzik authored
      into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5
      6b537219
    • Jeff Garzik's avatar
      Merge mandrakesoft.com:/home/jgarzik/vanilla/linus-2.5 · 5a1c8ba5
      Jeff Garzik authored
      into mandrakesoft.com:/home/jgarzik/repo/irda-2.5
      5a1c8ba5
    • Jeff Garzik's avatar
      Fix phy id masking in 8139too net driver. · 3ab2ff95
      Jeff Garzik authored
      Noticed by Eric Bowles.
      3ab2ff95
    • Jeff Garzik's avatar
    • Roger Luethi's avatar
    • Greg Kroah-Hartman's avatar
      Change to the USB core to retry failed devices on startup. · 82b3d954
      Greg Kroah-Hartman authored
      Based on a patch from Georg Acher <georg@acher.org>
      82b3d954
    • Johannes Erdfelt's avatar
      [PATCH] 2.4.19-pre8 uhci.c incorrect bit operations · 919c1984
      Johannes Erdfelt authored
      Woops, I sent the wrong version. There was one extra line that was
      required.
      919c1984
    • Johannes Erdfelt's avatar
      [PATCH] 2.4.19-pre8 uhci.c incorrect bit operations · 448c86dd
      Johannes Erdfelt authored
      This fixes up a couple of problems I came across while working on
      uhci-hcd. There are a couple of places where shifts are used where they
      shouldn't be and others where should be.
      
      This cleans up a couple of cases and tidys it up.
      
      The patch is relative to 2.4.19-pre8 and my other patches, but it's
      alright to wait for 2.4.20. It should also be applied to 2.5.
      448c86dd
    • Johannes Erdfelt's avatar
      [PATCH] uhci-hcd for 2.5.15 · 7ed10dbc
      Johannes Erdfelt authored
      So I finally hunkered down and got uhci-hcd working. I was surprised how
      easy it was to make the modifications for hcd.c.
      
      This patch has received a moderate amount of testing so far. I've played
      with various devices and haven't had any problems. I won't claim it's
      bug free yet and I'll continue doing more testing.
      
      The patch includes a small change to hcd.c to not call free_config if
      the HCD doesn't implement it.
      
      There are some other messages that get printed such as:
      
      hcd.c: usb_hcd_pci_remove 00:10.0, count != 1
      
      but it appears from the code that this is just a soft warning that all
      of the references to the bus aren't freed yet. This isn't a bug.
      
      Differences from usb-uhci/usb-uhci-hcd:
      - Cleaner code. uhci-hcd is based off of uhci, so it maintains the same
        look and feel as well as readability.
      - Faster. The tests I've run so far show that uhci-hcd is faster in
        every case than usb-uhci-hcd
      - It does not have the watchdog type feature for VIA chipsets. It's
        something that is definately possible to implement, but I'd like to
        find out what Windows does first.
      
      Differences from uhci:
      - Modified to use the hcd.c framework. This removed a significant amount
        of code and nesessitated lots of little changes.
      - Big endian support. I haven't been able to test it on a big endian
        machine yet, but atleast 90+% of the work should be done. Once I get
        my PowerPC working again, I'll test this and submit any appropriate
        patches. This was the biggest functional change between uhci.c.
      - No more urb->next processing. Completely ripped out.
      - urb->interval support for Isochronous pipes.
      - A couple of bug fixes for some problems I noticed while working on the
        code. These will be submitted for uhci.c in a seperate email.
      7ed10dbc
  4. 15 May, 2002 3 commits
  5. 14 May, 2002 1 commit
  6. 13 May, 2002 5 commits
    • Kai Germaschewski's avatar
      Fix arch/alpha/boot AS rule · 3460269d
      Kai Germaschewski authored
      arch/alpha/boot does not include Rules.make, so it can't use
      the assembler rule provided there ;(
      3460269d
    • Kai Germaschewski's avatar
      x86_64: Use standard AS rule · 4dfa2bf1
      Kai Germaschewski authored
      4dfa2bf1
    • Kai Germaschewski's avatar
      Make AFLAGS_KERNEL use consistent with CFLAGS_KERNEL · c36b8ba9
      Kai Germaschewski authored
      CFLAGS_KERNEL is automatically added to the command line for compiling
      objects which will be linked into vmlinux. (As opposed to objects which
      will be in modules, where MODFLAGS is added).
      
      AFLAGS_KERNEL was not added automatically, now it is:
      
      AFLAGS_KERNEL is now automatically added to the command line for assembling
      objects which will be linked into vmlinux.
      
      Note: this change is a no-op for all archs except IA64, since
      [AC]FLAGS_KERNEL is not used there at all.
      
      At the same time, remove two assembling rules from two arch/ia64 
      subdirectories which don't contain any assembler sources at all.
      
      Also, add an @ in front of the ugly
      	make CFLAGS=".." AFLAGS=".." -C subdir
      command, make will print its "Entering directory ..." line, so 
      we get that information anyway.
      c36b8ba9
    • Kai Germaschewski's avatar
      IA64: Use standard AS rule · 79455a34
      Kai Germaschewski authored
      79455a34
    • Greg Kroah-Hartman's avatar
      USB sddr55 minor patch to enable a MDSM-B reader · a8025e16
      Greg Kroah-Hartman authored
      This was forgotten in the previous sddr55 patch import, and is needed
      to support the MDSM-B reader devices.
      
      Thanks to Andries.Brouwer@cwi.nl for the 2.4.x version of the patch.
      a8025e16