- 10 Feb, 2017 13 commits
-
-
Vincent Abriou authored
Remove the hdmi_mode_property and use drm_detect_hdmi_monitor function to check whether the connected monitor is HDMI capable or DVI only. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
Unbind all the components when the STI driver is unregistered. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
Do not process update requests with unmodified parameters. This typically happens when the driver is called with legacy (non-atomic) IOCTL : in that case atomic_update() is called multiple times with the same parameters. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
Fix a division by 0 case : in some cases, when the GDP plane is being disabled atomic_check() is called with "mode->clock = 0". In that case, do not set parent and pixel clock rate. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
Set gdp pix clock rate and parent in atomic_check function and enable it in the atomic_update only the first time. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
stih416 chip family is no more supported in Linux v4.9. It is then useless to keep vtg slave field since it not used at all for the stih407/10 chip family supported by sti driver. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Vincent Abriou authored
stih416 chip family is no more supported in Linux v4.9. Then sink_term config becomes useless. The field of the register it was referring to is tag as reserved for stih410 chip family. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
-
Fabien DESSENNE authored
Fix a division by 0 case : in some cases, when the HQVDP plane is being disabled atomic_check() is called with "mode->clock = 0". In that case, do not check for scaling capabilities. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Vincent Abriou <vincent.abriou@st.com>
-
Fabien DESSENNE authored
Use drm-core to handle event. This is required to be able to use the nonblocking helpers. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Vincent Abriou <vincent.abriou@st.com>
-
Fabien DESSENNE authored
Since nonblocking atomic commits are now supported, the driver can now use drm_atomic_helper_commit(). Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Vincent Abriou <vincent.abriou@st.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Some additional fixes for 4.11. Delayed a bit due to Chinese New Year. Highlights: - Powerplay fixes - VCE and UVD powergating fixes - Clean up amdgpu SI gfx code to match CI and VI - Misc bug fixes * 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits) drm/amdgpu: report the number of bytes moved at buffer creation drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted() drm/amdgpu: add support for new smc firmware on polaris drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared. drm/amdgpu: shut up #warning for compile testing drm/amdgpu/virt: fix double kfree on bo_va drm/radeon: remove some dead code drm/radeon: avoid kernel segfault in vce when gpu fails to resume drm/amd/powerplay: set fan speed to max in profile peak mode only. drm/amd/gfx6: update gb_addr_config drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN drm/amdgpu: refine si_read_register drm/amdgpu/gfx6: clean up spi configuration drm/amdgpu/gfx6: clean up cu configuration drm/amdgpu/gfx6: clean up rb configuration drm/amdgpu: refine vce3.0 code and related powerplay pg code. drm/amdgpu: move subfunctions to the front of vce_v2_0.c. drm/amdgpu: enable vce pg feature on Kv. drm/amdgpu: refine code for VCE2.0 and related dpm code. ...
-
http://git.agner.ch/git/linux-drm-fsl-dcuDave Airlie authored
two minor fixes. * tag 'drm-fsl-dcu-for-v4.11' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: check for clk_prepare_enable() error drm/fsl-dcu: remove unneeded 'ret' assignment
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next Just 3 bugfixes for 4.11 merge window: - fbdev module unload oops fix from Chris - patch from Dan that look really dangers, better safe than sorry * tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc: drm/atomic: fix an error code in mode_fixup() drm: Cancel drm_fb_helper_resume_work on unload drm: Cancel drm_fb_helper_dirty_work on unload
-
- 09 Feb, 2017 8 commits
-
-
Samuel Pitoiset authored
Like ttm_bo_validate(), ttm_bo_init() might need to move BO and the number of bytes moved by TTM should be reported. This can help the throttle buffer migration mechanism to make a better decision. v2: fix computation Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Samuel Pitoiset authored
When ttm_bo_init() fails, the reservation mutex should be unlocked. In debug build, the kernel reported "possible recursive locking detected" in this codepath. For debugging purposes, I also added a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the mutex was locked as expected. This should fix (random) GPU hangs. The easy way to reproduce the issue is to change the "Super Sampling" option from 1.0 to 2.0 in Hitman. It will create a huge buffer, evict a bunch of buffers (around ~5k) and deadlock. This regression has been introduced pretty recently. v2: only release the mutex if resv is NULL Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Some polaris variants require new smc firmware. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Arnd Bergmann authored
My randconfig tests on linux-next showed a newly introduced warning: drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted': drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp] Generally speaking, warnings about bad kernel configuration are not particularly helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver cannot even be used unless it is enabled, or we could just rely on the runtime warning that is also there. In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which shuts it up for me, but not people that may actually want to run the kernel as a compromize. Fixes: a2e2f299 ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)") Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Colin Ian King authored
bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv and then a short while later. Fix this double free by removing the 2nd kfree. Detected by CoverityScan, CID#1399524 ("Double Free") Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dan Carpenter authored
If "rdev->bios" is NULL then we don't need to free it. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jérôme Glisse authored
When GPU fails to resume we can not trust that value we write to GPU memory will post and we might get garbage (more like 0xffffffff on x86) when reading them back. This trigger out of range memory access in the kernel inside the vce resume code path. This patch use canonical value to compute offset instead of reading back value from GPU memory. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 08 Feb, 2017 19 commits
-
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
1. not start vce3.0 when hw_init 2. stop vce3.0 when vce idle. 3. pg mask used to ctrl power down/up vce. 4. change cg pg sequence in powerplay. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
v2: clean up vce cg function. use sw cg when vce stoped. 1. implement vce_stop function. 2. not start vce when hw_init. 3. refine vce cg/pg code. 4. delete bypass mode. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
1. delete redundant cg pg mask check. pg mask use to ctrl power on/down uvd. not start/stop uvd. cg mask will be check when enable mgcg. 2. no need to start uvd when initializ. when ring test/ib test/encode, uvd was enabled. when uvd idle, uvd was stopped. 3. chang cg pg sequence in powerplay. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
need to start smc when dpm disabled. otherwise, uvd can't get response from smu. so uvd ring test and ib test will timeout. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
1. set uvd_status busy before uvd_start. 2. clear uvd_status to 0 after uvd stop. smu firmware may check uvd_status. 3. wait uvd idle before stop uvd. 4. not start uvd when hw_init. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
1. no need to set cg as use hw dynamic cg. 2. when uvd idle, stop uvd. encode, start uvd. 3. if pg feature enabled, power on/down uvd by smu. 4. drm/amdgpu: dpm do not set uvd pg status. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-