- 02 Sep, 2020 13 commits
-
-
Tejun Heo authored
Currently, iocost doesn't collect or expose any statistics punting off all monitoring duties to drgn based iocost_monitor.py. While it works for some scenarios, there are some usability and data availability challenges. For example, accurate per-cgroup usage information can't be tracked by vtime progression at all and the number available in iocg->usages[] are really short-term snapshots used for control heuristics with possibly significant errors. This patch implements per-cgroup absolute usage stat counter and exposes it through io.stat along with the current vrate. Usage stat collection and flushing employ the same method as cgroup rstat on the active iocg's and the only hot path overhead is preemption toggling and adding to a percpu counter. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Currently, debt handling requires only iocg->waitq.lock. In the future, we want to adjust and propagate inuse changes depending on debt status. Let's grab ioc->lock in debt handling paths in preparation. * Because ioc->lock nests outside iocg->waitq.lock, the decision to grab ioc->lock needs to be made before entering the critical sections. * Add and use iocg_[un]lock() which handles the conditional double locking. * Add @pay_debt to iocg_kick_waitq() so that debt payment happens only when the caller grabbed both locks. This patch is prepatory and the comments contain references to future changes. Signed-off-by:
-
Tejun Heo authored
The margin handling was pretty inconsistent. * ioc->margin_us and ioc->inuse_margin_vtime were used as vtime margin thresholds. However, the two are in different units with the former requiring conversion to vtime on use. * iocg_kick_waitq() was using a quarter of WAITQ_TIMER_MARGIN_PCT of period_us as the timer slack - ~1.2%. While iocg_kick_delay() was using a quarter of ioc->margin_us - ~12.5%. There aren't strong reasons to use different values for the two. This patch cleans up margin and timer slack handling: * vtime margins are now recorded in ioc->margins.{min, max} on period duration changes and used consistently. * Timer slack is now 1% of period_us and recorded in ioc->timer_slack_ns and used consistently for iocg_kick_waitq() and iocg_kick_delay(). The only functional change is shortening of timer slack. No meaningful visible change is expected. Signed-off-by: -
Tejun Heo authored
They are in microseconds and wrap in around 1.2 hours with u32. While unlikely, confusions from wraparounds are still possible. We aren't saving anything meaningful by keeping these u32. Let's make them u64. Signed-off-by:
-
Tejun Heo authored
To improve weight donations, we want to able to scale inuse with a greater accuracy and down below 1. Let's make non-hierarchical weights to use WEIGHT_ONE based fixed point numbers too like hierarchical ones. This doesn't cause any behavior changes yet. Signed-off-by:
-
Tejun Heo authored
We're gonna use HWEIGHT_WHOLE for regular weights too. Let's rename it to WEIGHT_ONE. Pure rename. Signed-off-by:
-
Tejun Heo authored
iocg_kick_waitq() is the function which pays debt and iocg_kick_delay() updates the actual delay status accordingly. If iocg_kick_delay() is not called after iocg_kick_delay() updated debt, unnecessarily large delays can be applied temporarily. Let's make sure such conditions don't occur by making iocg_kick_waitq() always call iocg_kick_delay() after paying debt. Signed-off-by:
-
Tejun Heo authored
We'll make iocg_kick_waitq() call iocg_kick_delay(). Reorder them in preparation. This is pure code reorganization. Signed-off-by:
-
Tejun Heo authored
__propagate_weights() currently expects the callers to clamp inuse within [1, active], which is needlessly fragile. The inuse adjustment logic is going to be revamped, in preparation, let's make __propagate_weights() clamp inuse on entry. Also, make it avoid weight updates altogether if neither active or inuse is changed. Signed-off-by:
-
Tejun Heo authored
It already propagates two weights - active and inuse - and there will be another soon. Let's drop the confusing misnomers. Rename [__]propagate_active_weights() to [__]propagate_weights() and commit_active_weights() to commit_weights(). This is pure rename. Signed-off-by:
-
Tejun Heo authored
blk-iocost has been reading percpu stat counters from remote cpus which on some archs can lead to torn reads in really rare occassions. Use local[64]_t for those counters. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
We can trivially derive the gendisk from the hd_struct. Signed-off-by:
-
- 01 Sep, 2020 27 commits
-
-
Christoph Hellwig authored
Use early returns and goto-based unwinding to simplify the flow a bit. Signed-off-by:
-
Christoph Hellwig authored
devcgroup_inode_permission is never called for the recusive case, so move it out into blkdev_get. Signed-off-by:
-
Christoph Hellwig authored
kdev_t is long gone, so we don't need to comment a field isn't one.. Signed-off-by:
-
Christoph Hellwig authored
The alignment offset is only used in slow path callers, so just calculate it on the fly. Signed-off-by:
-
Christoph Hellwig authored
The alignment offset is only used in slow path callers, so just calculate it on the fly. Signed-off-by:
-
Xianting Tian authored
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG. Signed-off-by:
Xianting Tian <tian.xianting@h3c.com> Signed-off-by:
-
Baolin Wang authored
The small blk_mq_attempt_merge() function is only called by __blk_mq_sched_bio_merge(), just open code it. Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Baolin Wang authored
There are lots of duplicated code when trying to merge a bio from plug list and sw queue, we can introduce a new helper to attempt to merge a bio, which can simplify the blk_bio_list_merge() and blk_attempt_plug_merge(). Reviewed-by:
-
Baolin Wang authored
Move the blk_mq_bio_list_merge() into blk-merge.c and rename it as a generic name. Reviewed-by:
-
Baolin Wang authored
It's better to move bio merge related functions into blk-merge.c, which contains all merge related functions. Reviewed-by:
-
Danny Lin authored
This comment was added before the multiqueue I/O scheduler framework was introduced; multiqueue has support for I/O scheduling now, so this obsolete comment can be removed. Signed-off-by:
Danny Lin <danny@kdrag0n.dev> Signed-off-by:
-
Tian Tao authored
Use kobj_to_dev() instead of container_of() Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
The raw driver has been replaced by O_DIRECT support on the block device in 2002. Deprecate it to prepare for removal in a few kernel releases. Signed-off-by:
-
Christoph Hellwig authored
Just check if there is private data, in which case the bio must have originated from bio_copy_user_iov. Signed-off-by:
-
Christoph Hellwig authored
Just duplicate a small amount of code in the low-level map into the bio and copy to the bio routines, leading to much easier to follow and maintain code, and better shared error handling. Signed-off-by:
-
Christoph Hellwig authored
Open code __blk_rq_unmap_user in the two callers. Both never pass a NULL bio, and one of them can use an existing local variable instead of the bio flag. Signed-off-by:
-
Christoph Hellwig authored
We can simply use a boolean flag in the bio_map_data data structure instead. Signed-off-by:
-
Christoph Hellwig authored
In nvme_set_queue_dying we really just want to ensure the disk and bdev sizes are set to zero. Going through revalidate_disk leads to a somewhat arcance and complex callchain relying on special behavior in a few places. Instead just lift the set_capacity directly to nvme_set_queue_dying, and rename and move the nvme_mpath_update_disk_size helper so that we can use it in nvme_set_queue_dying to propagate the size to the bdev without detours. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Christoph Hellwig authored
Two different callers use two different mutexes for updating the block device size, which obviously doesn't help to actually protect against concurrent updates from the different callers. In addition one of the locks, bd_mutex is rather prone to deadlocks with other parts of the block stack that use it for high level synchronization. Switch to using a new spinlock protecting just the size updates, as that is all we need, and make sure everyone does the update through the proper helper. This fixes a bug reported with the nvme revalidating disks during a hot removal operation, which can currently deadlock on bd_mutex. Reported-by:
Xianting Tian <xianting_tian@126.com> Signed-off-by:
-
Christoph Hellwig authored
Replace bd_set_size with a version that takes the number of sectors instead, as that fits most of the current and future callers much better. Signed-off-by:
-
Geert Uytterhoeven authored
request_queue.rpm_status is assigned values of the rpm_status enum only, so reflect that in its type. Note that including <linux/pm.h> is (currently) a no-op, as it is already included through <linux/genhd.h> and <linux/device.h>, but it is better to play it safe. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jens Axboe authored
* block-5.9: blk-stat: make q->stats->lock irqsafe blk-iocost: ioc_pd_free() shouldn't assume irq disabled block: fix locking in bdev_del_partition block: release disk reference in hd_struct_free_work block: ensure bdi->io_pages is always initialized nvme-pci: cancel nvme device request before disabling nvme: only use power of two io boundaries nvme: fix controller instance leak nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()' nvme: Fix NULL dereference for pci nvme controllers nvme-rdma: fix reset hang if controller died in the middle of a reset nvme-rdma: fix timeout handler nvme-rdma: serialize controller teardown sequences nvme-tcp: fix reset hang if controller died in the middle of a reset nvme-tcp: fix timeout handler nvme-tcp: serialize controller teardown sequences nvme: have nvme_wait_freeze_timeout return if it timed out nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
-
Tejun Heo authored
blk-iocost calls blk_stat_enable_accounting() while holding an irqsafe lock which triggers a lockdep splat because q->stats->lock isn't irqsafe. Let's make it irqsafe. Signed-off-by:
-
Tejun Heo authored
ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled when it can be called with irq disabled or enabled. This has a small chance of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations instead. Signed-off-by:
-
Christoph Hellwig authored
We need to hold the whole device bd_mutex to protect against other thread concurrently deleting out partition before we get to it, and thus causing a use after free. Fixes: cddae808 ("block: pass a hd_struct to delete_partition") Reported-by: syzbot+6448f3c229bc52b82f69@syzkaller.appspotmail.com Signed-off-by:
-
Ming Lei authored
Commit e8c7d14a ("block: revert back to synchronous request_queue removal") stops to release request queue from wq context because that commit supposed all blk_put_queue() is called in context which is allowed to sleep. However, this assumption isn't true because we release disk's reference in partition's percpu_ref's ->release() which doesn't allow to sleep, because the ->release() is run via call_rcu(). Fixes this issue by moving put disk reference into hd_struct_free_work() Fixes: e8c7d14a ("block: revert back to synchronous request_queue removal") Reported-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Tested-by:
-
Jens Axboe authored
If a driver leaves the limit settings as the defaults, then we don't initialize bdi->io_pages. This means that file systems may need to work around bdi->io_pages == 0, which is somewhat messy. Initialize the default value just like we do for ->ra_pages. Cc: stable@vger.kernel.org Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting") Reported-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by:
-
