- 28 Sep, 2020 1 commit
-
-
Thomas Gleixner authored
The unconditional selection of PCI_MSI_ARCH_FALLBACKS has an unmet dependency because PCI_MSI_ARCH_FALLBACKS is defined in a 'if PCI' clause. As it is only relevant when PCI_MSI is enabled, update the affected architecture Kconfigs to make the selection of PCI_MSI_ARCH_FALLBACKS depend on 'if PCI_MSI'. Fixes: 077ee78e ("PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable") Reported-by:
Qian Cai <cai@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Links: https://lore.kernel.org/r/cdfd63305caa57785b0925dd24c0711ea02c8527.camel@redhat.com
-
- 27 Sep, 2020 1 commit
-
-
Thomas Gleixner authored
Switching the DMAR and HPET MSI code to use the generic MSI domain ops missed to add the flag which tells the core code to update the domain operations with the defaults. As a consequence the core code crashes when an interrupt in one of those domains is allocated. Add the missing flags. Fixes: 9006c133 ("x86/msi: Use generic MSI domain ops") Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
- 16 Sep, 2020 38 commits
-
-
Thomas Gleixner authored
Now that the domain can be retrieved through device::msi_domain the domain search for PCI_MSI[X] is not longer required. Remove it. Signed-off-by:
-
Thomas Gleixner authored
Now that the domain can be retrieved through device::msi_domain the domain search for PCI_MSI[X] is not longer required. Remove it. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112334.305699301@linutronix.de
-
Thomas Gleixner authored
Nothing except XEN uses the setup/teardown ops. Hide them there. Signed-off-by:
-
Thomas Gleixner authored
Get rid of all the gunk and remove the 'select PCI_MSI_ARCH_FALLBACK' from the x86 Kconfig so the weak functions in the PCI core are replaced by stubs which emit a warning, which ensures that any fail to set the irq domain pointer results in a warning when the device is used. Signed-off-by:
-
Thomas Gleixner authored
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture requires them or not. Architectures which are fully utilizing hierarchical irq domains should never call into that code. It's not only architectures which depend on that by implementing one or more of the weak functions, there is also a bunch of drivers which relies on the weak functions which invoke msi_controller::setup_irq[s] and msi_controller::teardown_irq. Make the architectures and drivers which rely on them select them in Kconfig and if not selected replace them by stub functions which emit a warning and fail the PCI/MSI interrupt allocation. Signed-off-by:
-
Thomas Gleixner authored
Now that interrupt remapping sets the irqdomain pointer when a PCI device is added it's possible to store the default irq domain in the device struct in pcibios_add_device(). If the bus to which a device is connected has an irq domain associated then this domain is used otherwise the default domain (PCI/MSI native or XEN PCI/MSI) is used. Using the bus domain ensures that special MSI bus domains like VMD work. This makes XEN and the non-remapped native case work solely based on the irq domain pointer in struct device for PCI/MSI and allows to remove the arch fallback and make most of the x86_msi ops private to XEN in the next steps. Signed-off-by:
-
Thomas Gleixner authored
As the next step to make X86 utilize the direct MSI irq domain operations store the irq domain pointer in the device struct when a device is probed. It only overrides the irqdomain of devices which are handled by a regular PCI/MSI irq domain which protects PCI devices behind special busses like VMD which have their own irq domain. No functional change. It just avoids the redirection through arch_*_msi_irqs() and allows the PCI/MSI core to directly invoke the irq domain alloc/free functions instead of having to look up the irq domain for every single MSI interupt. Signed-off-by:
-
Thomas Gleixner authored
As a first step to make X86 utilize the direct MSI irq domain operations store the irq domain pointer in the device struct when a device is probed. This is done from dmar_pci_bus_add_dev() because it has to work even when DMA remapping is disabled. It only overrides the irqdomain of devices which are handled by a regular PCI/MSI irq domain which protects PCI devices behind special busses like VMD which have their own irq domain. No functional change. It just avoids the redirection through arch_*_msi_irqs() and allows the PCI/MSI core to directly invoke the irq domain alloc/free functions instead of having to look up the irq domain for every single MSI interupt. Signed-off-by:
-
Thomas Gleixner authored
To allow utilizing the irq domain pointer in struct device it is necessary to make XEN/MSI irq domain compatible. While the right solution would be to truly convert XEN to irq domains, this is an exercise which is not possible for mere mortals with limited XENology. Provide a plain irqdomain wrapper around XEN. While this is blatant violation of the irqdomain design, it's the only solution for a XEN igorant person to make progress on the issue which triggered this change. Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200826112333.622352798@linutronix.de
-
Thomas Gleixner authored
To support MSI irq domains which do not fit at all into the regular MSI irqdomain scheme, like the XEN MSI interrupt management for PV/HVM/DOM0, it's necessary to allow to override the alloc/free implementation. This is a preperatory step to switch X86 away from arch_*_msi_irqs() and store the irq domain pointer right in struct device. No functional change for existing MSI irq domain users. Aside of the evil XEN wrapper this is also useful for special MSI domains which need to do extra alloc/free work before/after calling the generic core function. Work like allocating/freeing MSI descriptors, MSI storage space etc. Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826112333.526797548@linutronix.de
-
Thomas Gleixner authored
X86 cannot store the irq domain pointer in struct device without breaking XEN because the irq domain pointer takes precedence over arch_*_msi_irqs() fallbacks. To achieve this XEN MSI interrupt management needs to be wrapped into an irq domain. Move the x86_msi ops setup into a single function to prepare for this. Signed-off-by:
-
Thomas Gleixner authored
X86 cannot store the irq domain pointer in struct device without breaking XEN because the irq domain pointer takes precedence over arch_*_msi_irqs() fallbacks. XENs MSI teardown relies on default_teardown_msi_irqs() which invokes arch_teardown_msi_irq(). default_teardown_msi_irqs() is a trivial iterator over the msi entries associated to a device. Implement this loop in xen_teardown_msi_irqs() to prepare for removal of the fallbacks for X86. This is a preparatory step to wrap XEN MSI alloc/free into a irq domain which in turn allows to store the irq domain pointer in struct device and to use the irq domain functions directly. Signed-off-by:
-
Thomas Gleixner authored
The only user is in the same file and the name is too generic because this function is only ever used for HVM domains. Signed-off-by:
-
Thomas Gleixner authored
Provide a helper function to check whether a PCI device is handled by a non-standard PCI/MSI domain. This will be used to exclude such devices which hang of a special bus, e.g. VMD, to be excluded from the irq domain override in irq remapping. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200826112333.139387358@linutronix.de
-
Thomas Gleixner authored
Devices on the VMD bus use their own MSI irq domain, but it is not distinguishable from regular PCI/MSI irq domains. This is required to exclude VMD devices from getting the irq domain pointer set by interrupt remapping. Override the default bus token. Signed-off-by:
-
Thomas Gleixner authored
PCI devices behind a VMD bus are not subject to interrupt remapping, but the irq domain for VMD MSI cannot be distinguished from a regular PCI/MSI irq domain. Add a new domain bus token and allow it in the bus token check in msi_check_reservation_mode() to keep the functionality the same once VMD uses this token. Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Link: https://lore.kernel.org/r/20200826112332.954409970@linutronix.de
-
Thomas Gleixner authored
No point in initializing the default PCI/MSI interrupt domain early and no point to create it when XEN PV/HVM/DOM0 are active. Move the initialization to pci_arch_init() and convert it to init ops so that XEN can override it as XEN has it's own PCI/MSI management. The XEN override comes in a later step. Signed-off-by:
-
Thomas Gleixner authored
Adding a function call before the first #ifdef in arch_pci_init() triggers a 'mixed declarations and code' warning if PCI_DIRECT is enabled. Use stub functions and move the #ifdeffery to the header file where it is not in the way. Signed-off-by:
-
Thomas Gleixner authored
No point to call it from both 32bit and 64bit implementations of default_setup_apic_routing(). Move it to the caller. Signed-off-by:
-
Thomas Gleixner authored
pci_msi_get_hwirq() and pci_msi_set_desc are not longer special. Enable the generic MSI domain ops in the core and PCI MSI code unconditionally and get rid of the x86 specific implementations in the X86 MSI code and in the hyperv PCI driver. Signed-off-by:
-
Thomas Gleixner authored
Convert the interrupt remap drivers to retrieve the pci device from the msi descriptor and use info::hwirq. This is the first step to prepare x86 for using the generic MSI domain ops. Signed-off-by:
Wei Liu <wei.liu@kernel.org> Acked-by:
-
Thomas Gleixner authored
Retrieve the PCI device from the msi descriptor instead of doing so at the call sites. Signed-off-by:
-
Thomas Gleixner authored
Move the UV specific fields into their own struct for readability sake. Get rid of the #ifdeffery as it does not matter at all whether the alloc info is a couple of bytes longer or not. Signed-off-by:
-
Thomas Gleixner authored
None of the DMAR specific fields are required. Signed-off-by:
-
Thomas Gleixner authored
Move the IOAPIC specific fields into their own struct and reuse the common devid. Get rid of the #ifdeffery as it does not matter at all whether the alloc info is a couple of bytes longer or not. Signed-off-by:
-
Thomas Gleixner authored
None of the magic HPET fields are required in any way. Signed-off-by:
-
Thomas Gleixner authored
struct irq_alloc_info is a horrible zoo of unnamed structs in a union. Many of the struct fields can be generic and don't have to be type specific like hpet_id, ioapic_id... Provide a generic set of members to prepare for the consolidation. The goal is to make irq_alloc_info have the same basic member as the generic msi_alloc_info so generic MSI domain ops can be reused and yet more mess can be avoided when (non-PCI) device MSI support comes along. Signed-off-by:
-
Thomas Gleixner authored
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN types, consolidate the two getter functions. Signed-off-by:
-
Thomas Gleixner authored
The irq domain request mode is now indicated in irq_alloc_info::type. Consolidate the two getter functions into one. Signed-off-by:
-
Thomas Gleixner authored
The irq domain request mode is now indicated in irq_alloc_info::type. Consolidate the two getter functions into one. Signed-off-by:
-
Thomas Gleixner authored
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent domain for an allocation type. irq_remapping_irq_domain() is for retrieving the actual device domain for allocating interrupts for a device. The two functions are similar and can be unified by using explicit modes for parent irq domain retrieval. Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu implementations. Drop the parent domain retrieval for PCI_MSI/X as that is unused. Signed-off-by:
-
Thomas Gleixner authored
No functional change. Signed-off-by:
-
Thomas Gleixner authored
Setting the irq_set_vcpu_affinity() callback to irq_chip_set_vcpu_affinity_parent() is a pointless exercise because the function which utilizes it searchs the domain hierarchy to find a parent domain which has such a callback. Remove the useless indirection. Signed-off-by:
-
Thomas Gleixner authored
Composing the MSI message at the MSI chip level is wrong because the underlying parent domain is the one which knows how the message should be composed for the direct vector delivery or the interrupt remapping table entry. The interrupt remapping aware PCI/MSI chip does that already. Make the direct delivery chip do the same and move the composition of the direct delivery MSI message to the vector domain irq chip. This prepares for the upcoming device MSI support to avoid having architecture specific knowledge in the device MSI domain irq chips. Signed-off-by:
-
Thomas Gleixner authored
The documentation of irq_chip_compose_msi_msg() claims that with hierarchical irq domains the first chip in the hierarchy which has an irq_compose_msi_msg() callback is chosen. But the code just keeps iterating after it finds a chip with a compose callback. The x86 HPET MSI implementation relies on that behaviour, but that does not make it more correct. The message should always be composed at the domain which manages the underlying resource (e.g. APIC or remap table) because that domain knows about the required layout of the message. On X86 the following hierarchies exist: 1) vector -------- PCI/MSI 2) vector -- IR -- PCI/MSI The vector domain has a different message format than the IR (remapping) domain. So obviously the PCI/MSI domain can't compose the message without having knowledge about the parent domain, which is exactly the opposite of what hierarchical domains want to achieve. X86 actually has two different PCI/MSI chips where #1 has a compose callback and #2 does not. #2 delegates the composition to the remap domain where it belongs, but #1 does it at the PCI/MSI level. For the upcoming device MSI support it's necessary to change this and just let the first domain which can compose the message take care of it. That way the top level chip does not have to worry about it and the device MSI code does not need special knowledge about topologies. It just sets the compose callback to NULL and lets the hierarchy pick the first chip which has one. Due to that the attempt to move the compose callback from the direct delivery PCI/MSI domain to the vector domain made the system fail to boot with interrupt remapping enabled because in the remapping case irq_chip_compose_msi_msg() keeps iterating and choses the compose callback of the vector domain which obviously creates the wrong format for the remap table. Break out of the loop when the first irq chip with a compose callback is found and fixup the HPET code temporarily. That workaround will be removed once the direct delivery compose callback is moved to the place where it belongs in the vector domain. Signed-off-by:
-
Thomas Gleixner authored
VMD has it's own PCI/MSI interrupt domain which is not in any way depending on the x86 vector domain. PCI devices behind VMD share the VMD MSIX vector entries via a VMD specific message translation to the actual VMD MSIX vector. The VMD device interrupt handler for the VMD MSIX vectors invokes all interrupt handlers of the devices which share a vector. Making the x86 vector domain the actual parent of the VMD irq domain is pointless and actually counterproductive. When a device interrupt is requested then it will activate the interrupt which traverses down the hierarchy and consumes an interrupt vector in the vector domain which is never used. The domain is self contained and has no parent dependencies, so just hand in NULL for the parent and be done with it. Signed-off-by:
-
Thomas Gleixner authored
Some past platform removal forgot to get rid of this unused ballast. Signed-off-by:
-
Thomas Gleixner authored
Dereferencing irq_data before checking it for NULL is suboptimal. Signed-off-by:
-
