Cotsworks modules fail the checksums - it appears that Cotsworks
reprograms the EEPROM at the end of production with the final product
information (serial, date code, and exact part number for module
options) and fails to update the checksum.

Work around this by detecting the Cotsworks name in the manufacturer
field, and reducing the checksum failures to warnings rather than a
hard error.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Flash upgrade support.

The patch series adds adapter flash upgrade support for qed/qede drivers.

Please consider applying it to net-next branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds ethtool callback implementation for flash update.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the required driver support for updating the flash or
non volatile memory of the adapter. At highlevel, flash upgrade comprises
of reading the flash images from the input file, validating the images and
writing them to the respective paritions.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds APIs for flash access.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for populating the flash image attributes.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This FW contains several fixes and features

RDMA Features
- SRQ support
- XRC support
- Memory window support
- RDMA low latency queue support
- RDMA bonding support

RDMA bug fixes
- RDMA remote invalidate during retransmit fix
- iWARP MPA connect interop issue with RTR fix
- iWARP Legacy DPM support
- Fix MPA reject flow
- iWARP error handling
- RQ WQE validation checks

MISC
- Fix some HSI types endianity
- New Restriction: vlan insertion in core_tx_bd_data can't be set
  for LB packets

ETH
- HW QoS offload support
- Fix vlan, dcb and sriov flow of VF sending a packet with
  inband VLAN tag instead of default VLAN
- Allow GRE version 1 offloads in RX flow
- Allow VXLAN steering

iSCSI / FcoE
- Fix bd availability checking flow
- Support 256th sge proerly in iscsi/fcoe retransmit
- Performance improvement
- Fix handle iSCSI command arrival with AHS and with immediate
- Fix ipv6 traffic class configuration

DEBUG
- Update debug utilities
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4 was changed in commit 52a773d6 ("net: Export ip fragment
sysctl to unprivileged users")

The only sysctl that is not per-netns is not used :
ip6frag_secret_interval
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During heavy tx traffic, control messages (sent by liquidio driver to NIC
firmware) sometimes do not get processed in a timely manner.  Reason is:
the low-level metadata of control messages and that of egress network
packets indicate that they have the same priority.

Fix it by setting a higher priority for control messages through the new
ctrl_qpg field in the oct_txpciq struct.  It is the NIC firmware that does
the actual setting of priority by writing to the new ctrl_qpg field; the
host driver treats that value as opaque and just assigns it to pki_ih3->qpg
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Allow FIB notifiers to fail add and replace

I wanted to revisit how resource overload is handled for hardware offload
of FIB entries and rules. At the moment, the in-kernel fib notifier can
tell a driver about a route or rule add, replace, and delete, but the
notifier can not affect the action. Specifically, in the case of mlxsw
if a route or rule add is going to overflow the ASIC resources the only
recourse is to abort hardware offload. Aborting offload is akin to taking
down the switch as the path from data plane to the control plane simply
can not support the traffic bandwidth of the front panel ports. Further,
the current state of FIB notifiers is inconsistent with other resources
where a driver can affect a user request - e.g., enslavement of a port
into a bridge or a VRF.

As a result of the work done over the past 3+ years, I believe we are
at a point where we can bring consistency to the stack and offloads,
and reliably allow the FIB notifiers to fail a request, pushing an error
along with a suitable error message back to the user. Rather than
aborting offload when the switch is out of resources, userspace is simply
prevented from adding more routes and has a clear indication of why.

This set does not resolve the corner case where rules or routes not
supported by the device are installed prior to the driver getting loaded
and registering for FIB notifications. In that case, hardware offload has
not been established and it can refuse to offload anything, sending
errors back to userspace via extack. Since conceptually the driver owns
the netdevices associated with its asic, this corner case mainly applies
to unsupported rules and any races during the bringup phase.

Patch 1 fixes call_fib_notifiers to extract the errno from the encoded
response from handlers.

Patches 2-5 allow the call to call_fib_notifiers to fail the add or
replace of a route or rule.

Patch 6 adds a simple resource controller to netdevsim to illustrate
how a FIB resource controller can limit the number of route entries.

Changes since RFC
- correct return code for call_fib_notifier
- dropped patch 6 exporting devlink symbols
- limited example resource controller to init_net only
- updated Kconfig for netdevsim to use MAY_USE_DEVLINK
- updated cover letter regarding startup case noted by Ido
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add devlink support to netdevsim and use it to implement a simple,
profile based resource controller. Only one controller is needed
per namespace, so the first netdevsim netdevice in a namespace
registers with devlink. If that device is deleted, the resource
settings are deleted.

The resource controller allows a user to limit the number of IPv4 and
IPv6 FIB entries and FIB rules. The resource paths are:
    /IPv4
    /IPv4/fib
    /IPv4/fib-rules
    /IPv6
    /IPv6/fib
    /IPv6/fib-rules

The IPv4 and IPv6 top level resources are unlimited in size and can not
be changed. From there, the number of FIB entries and FIB rule entries
are unlimited by default. A user can specify a limit for the fib and
fib-rules resources:

    $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96
    $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16
    $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64
    $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16
    $ devlink dev reload netdevsim/netdevsim0

such that the number of rules or routes is limited (96 ipv4 routes in the
example above):
    $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done
    Error: netdevsim: Exceeded number of supported fib entries.

    $ devlink resource show netdevsim/netdevsim0
    netdevsim/netdevsim0:
      name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non
        resources:
          name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables
    ...

With this template in place for resource management, it is fairly trivial
to extend and shows one way to implement a simple counter based resource
controller typical of network profiles.

Currently, devlink only supports initial namespace. Code is in place to
adapt netdevsim to a per namespace controller once the network namespace
issues are resolved.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move call to call_fib6_entry_notifiers for new IPv6 routes to right
before the insertion into the FIB. At this point notifier handlers can
decide the fate of the new route with a clean path to delete the
potential new entry if the notifier returns non-0.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add checking to call to call_fib_entry_notifiers for IPv4 route replace.
Allows a notifier handler to fail the replace.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move call to call_fib_entry_notifiers for new IPv4 routes to right
before the call to fib_insert_alias. At this point the only remaining
failure path is memory allocations in fib_insert_node. Handle that
very unlikely failure with a call to call_fib_entry_notifiers to
tell drivers about it.

At this point notifier handlers can decide the fate of the new route
with a clean path to delete the potential new entry if the notifier
returns non-0.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move call_fib_rule_notifiers up in fib_nl_newrule to the point right
before the rule is inserted into the list. At this point there are no
more failure paths within the core rule code, so if the notifier
does not fail then the rule will be inserted into the list.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Notifier handlers use notifier_from_errno to convert any potential error
to an encoded format. As a consequence the other side, call_fib_notifier{s}
in this case, needs to use notifier_to_errno to return the error from
the handler back to its caller.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-03-27 (Misc updates & SQ recovery)

This series contains Misc updates and cleanups for mlx5e rx path
and SQ recovery feature for tx path.

From Tariq: (RX updates)
    - Disable Striding RQ when PCI devices, striding RQ limits the use
      of CQE compression feature, which is very critical for slow PCI
      devices performance, in this change we will prefer CQE compression
      over Striding RQ only on specific "slow"  PCIe links.
    - RX path cleanups
    - Private flag to enable/disable striding RQ

From Eran: (TX fast recovery)
    - TX timeout logic improvements, fast SQ recovery and TX error reporting
      if a HW error occurs while transmitting on a specific SQ, the driver will
      ignore such error and will wait for TX timeout to occur and reset all
      the rings. Instead, the current series improves the resiliency for such
      HW errors by detecting TX completions with errors, which will report them
      and perform a fast recover for the specific faulty SQ even before a TX
      timeout is detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Introduce net_rwsem to protect net_namespace_list

The series introduces fine grained rw_semaphore, which will be used
instead of rtnl_lock() to protect net_namespace_list.

This improves scalability and allows to do non-exclusive sleepable
iteration for_each_net(), which is enough for most cases.

scripts/get_maintainer.pl gives enormous list of people, and I add
all to CC.

Note, that this patch is independent of "Close race between
{un, }register_netdevice_notifier and pernet_operations":
https://patchwork.ozlabs.org/project/netdev/list/?series=36495Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_lock() doesn't protect net::ct::count,
and it's not needed for__nf_ct_unconfirmed_destroy()
and for nf_queue_nf_hook_drop().
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Here we iterate for_each_net() and removes
vport from alive net to the exiting net.

ovs_net::dps are protected by ovs_mutex(),
and the others, who change it (ovs_dp_cmd_new(),
__dp_destroy()) also take it.
The same with datapath::ports list.

So, we remove rtnl_lock() here.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_genid_bump_all() consists of ipv4 and ipv6 part.
ipv4 part is incrementing of net::ipv4::rt_genid,
and I see many places, where it's read without rtnl_lock().

ipv6 part calls __fib6_clean_all(), and it's also
called without rtnl_lock() in other places.

So, rtnl_lock() here was used to iterate net_namespace_list only,
and we can remove it.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function iterates over net_namespace_list and flushes
the queue for every of them. What does this rtnl_lock()
protects?! Since we may add skbs to net::wext_nlevents
without rtnl_lock(), it does not protects us about queuers.

It guarantees, two threads can't flush the queue in parallel,
that can change the order, but since skb can be queued
in any order, it doesn't matter, how many threads do this
in parallel. In case of several threads, this will be even
faster.

So, we can remove rtnl_lock() here, as it was used for
iteration over net_namespace_list only.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_lock() is used everywhere, and contention is very high.
When someone wants to iterate over alive net namespaces,
he/she has no a possibility to do that without exclusive lock.
But the exclusive rtnl_lock() in such places is overkill,
and it just increases the contention. Yes, there is already
for_each_net_rcu() in kernel, but it requires rcu_read_lock(),
and this can't be sleepable. Also, sometimes it may be need
really prevent net_namespace_list growth, so for_each_net_rcu()
is not fit there.

This patch introduces new rw_semaphore, which will be used
instead of rtnl_mutex to protect net_namespace_list. It is
sleepable and allows not-exclusive iterations over net
namespaces list. It allows to stop using rtnl_lock()
in several places (what is made in next patches) and makes
less the time, we keep rtnl_mutex. Here we just add new lock,
while the explanation of we can remove rtnl_lock() there are
in next patches.

Fine grained locks generally are better, then one big lock,
so let's do that with net_namespace_list, while the situation
allows that.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bgmac: Couple of small bgmac changes

This patch series addresses two minor issues with the bgmac driver:

- provides the interface name through /proc/interrupts rather than "bgmac"
- makes sure the interrupts are masked during probe, in case the block was
  not properly reset
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can have interrupts left enabled form e.g: the bootloader which used
the network device for network boot. Make sure we have those disabled as
early as possible to avoid spurious interrupts.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the system contains several BGMAC adapters, it is nice to be able
to tell which one is which by looking at /proc/interrupts. Use the
network device name as a name to request_irq() with.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Tracing updates

Here are some patches that update tracing in AF_RXRPC and AFS:

 (1) Add a tracepoint for tracking resend events.

 (2) Use debug_ids in traces rather than pointers (as pointers are now hashed)
     and allow use of the same debug_id in AFS calls as in the corresponding
     AF_RXRPC calls.  This makes filtering the trace output much easier.

 (3) Add a tracepoint for tracking call completion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the National Instruments XGE 1/10G network device.

It uses the EEPROM on the board via NVMEM.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds bindings for the NI XGE 1G/10G network device.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-03-29

1) Remove a redundant pointer initialization esp_input_set_header().
   From Colin Ian King.

2) Mark the xfrm kmem_caches as __ro_after_init.
   From Alexey Dobriyan.

3) Do the checksum for an ipsec offlad packet in software
   if the device does not advertise NETIF_F_HW_ESP_TX_CSUM.
   From Shannon Nelson.

4) Use booleans for true and false instead of integers
   in xfrm_policy_cache_flush().
   From Gustavo A. R. Silva

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

An error TX completion (CQE) which arrived on a specific SQ indicates
that this SQ got moved by the hardware to error state, which means all
pending and incoming TX requests are dropped or will be dropped and no
further "Good" CQEs will be generated for that SQ.

Before this patch TX completions (CQEs) were not monitored and were
handled as a regular CQE. This caused the SQ to stay in an error state,
making it useless for xmiting new packets.

Mitigation plan:
In case of an error completion, schedule a recovery work which would do
the following:
- Mark the TXQ as DRV_XOFF to disable new packets to arrive from the
  stack
- NAPI to flush all pending SQ WQEs (via flush_in_error_en bit) to
  release SW and HW resources(SKB, DMA, etc) and have the SQ and CQ
  consumer/producer indices synced.
- Modify the SQ state ERR -> RST -> RDY (restart the SQ).
- Reactivate the SQ and reset SQ cc and pc

If we identify two consecutive requests for SQ recover in less than
500 msecs, drop the recover request to avoid CPU overload, as this
scenario most likely happened due to a severe repeated bug.

In addition, add SQ recover SW counter to monitor successful recoveries.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Monitor and dump xmit error completions. In addition, add err_cqe
counter to track the number of error completion per send queue.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Move mlx5_ib dump error CQE implementation to mlx5 CQ header file in
order to use it in a downstream patch from mlx5e.

In addition, use print_hex_dump instead of manual dumping of the buffer.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.

It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Driver callback for handling TX timeout should access some internal
resources (SQ, CQ) in order to decide if the tx timeout work should be
scheduled.  These resources might be unavailable if channels are closed
in parallel (ifdown for example).

The state lock is the mechanism to protect from such races.
Move all TX timeout logic to be in the work under a state lock.

In addition, Move the work from the global WQ to mlx5e WQ to make sure
this work is flushed when device is detached..

Also, move the mlx5e_tx_timeout_work code to be next to the TX timeout
NDO for better code locality.

Fixes: 3947ca18 ("net/mlx5e: Implement ndo_tx_timeout callback")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Commit 58d52291 ("net/mlx5e: Support TX packet copy into WQE")
introduced the max inline WQE as an ethtool tunable. One commit later,
that functionality was made dependent on BlueFlame.

Commit 6982ab60 ("net/mlx5e: Xmit, no write combining") removed
BlueFlame support, and with it the max inline WQE.
This patch cleans up the leftovers from the removed feature.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add a control private flag in ethtool to enable/disable
Striding RQ feature.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Do not implicit a call to mlx5e_init_rq_type_params() upon every
change in RQ type. It should be called only on channels creation.

Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

It can be derived from other params, calculate it
via the dedicated function when needed.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>