- 17 Dec, 2018 40 commits
-
-
Alin Nastac authored
[ Upstream commit 508b0904 ] When ip6_route_me_harder is invoked, it resets outgoing interface of: - link-local scoped packets sent by neighbor discovery - multicast packets sent by MLD host - multicast packets send by MLD proxy daemon that sets outgoing interface through IPV6_PKTINFO ipi6_ifindex Link-local and multicast packets must keep their original oif after ip6_route_me_harder is called. Signed-off-by:
Alin Nastac <alin.nastac@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christian Hewitt authored
[ Upstream commit 31e1ab49 ] This essential mode for PAL users is missing, so add it. Fixes: 335e3713 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 1830b6ee ] During NVM upgrade process the host router is hot-removed for a short while. During this time it is possible that the root port is moved into D3cold which would be fine if the root port could trigger PME on itself. However, many systems actually do not implement it so what happens is that the root port goes into D3cold and never wakes up unless userspace does PCI config space access, such as running 'lscpi'. For this reason we explicitly prevent the root port from runtime suspending during NVM upgrade. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 069caf59 ] Commit 387f869d ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour. Fixes: 387f869d ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 2c2322fb ] On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 6ca6695f ] On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 99f70036 ] We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function. Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case. The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 286afdde ] The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq(). Signed-off-by:
-
Xin Long authored
[ Upstream commit 2a31e4bd ] ip_vs_dst_event is supposed to clean up all dst used in ipvs' destinations when a net dev is going down. But it works only when the dst's dev is the same as the dev from the event. Now with the same priority but late registration, ip_vs_dst_notifier is always called later than ipv6_dev_notf where the dst's dev is set to lo for NETDEV_DOWN event. As the dst's dev lo is not the same as the dev from the event in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work. Also as these dst have to wait for dest_trash_timer to clean them up. It would cause some non-permanent kernel warnings: unregister_netdevice: waiting for br0 to become free. Usage count = 3 To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5. Note that for ipv4 route fib_netdev_notifier doesn't set dst's dev to lo in NETDEV_DOWN event, so this fix is only needed when IP_VS_IPV6 is defined. Fixes: 7a4f0761 ("IPVS: init and cleanup restructuring") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 64999fa7 ] In randconfig builds without CONFIG_GENERIC_ALLOCATOR, this driver fails to link: ERROR: "gen_pool_alloc_algo" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_fixed_alloc" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "of_gen_pool_get" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_free" [drivers/fsi/fsi-master-ast-cf.ko] undefined! Select the dependency as all other users do. Fixes: 6a794a27 ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Martynas Pumputis authored
[ Upstream commit 1efb6ee3 ] A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by:
Martynas Pumputis <m@lambda.lt> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Yixian Liu authored
[ Upstream commit ca088320 ] Current hns driver assigned the first two PBL page addresses from previous registered MR to the hardware when reregister MR changing the memory locations occurred. This will lead to PBL addressing error as the PBL has already been released. This patch fixes this wrong assignment by using the page address from new allocated PBL. Fixes: a2c80b7b ("RDMA/hns: Add rereg mr support for hip08") Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 2084ac6c ] The function dentry_connected calls dput(dentry) to drop the previously acquired reference to dentry. In this case, dentry can be released. After that, IS_ROOT(dentry) checks the condition (dentry == dentry->d_parent), which may result in a use-after-free bug. This patch directly compares dentry with its parent obtained before dropping the reference. Fixes: a056cc89("exportfs: stop retrying once we race with rename/remove") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit ffdcc363 ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 373a500e ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without under of overrun. Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit dd2f52d8 ] The latency number is in usec for the pm_qos. Correct the calculation to give us the time in usec Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit dde7011a ] This patch fixes a possible null pointer dereference in do_load, detected by the semantic patch deref_null.cocci, with the following warning: ./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced. The following code has potential null pointer references: 881 map_replace = reallocarray(map_replace, old_map_fds + 1, 882 sizeof(*map_replace)); 883 if (!map_replace) { 884 p_err("mem alloc failed"); 885 goto err_free_reuse_maps; 886 } ... 1019 err_free_reuse_maps: 1020 for (i = 0; i < old_map_fds; i++) 1021 close(map_replace[i].fd); 1022 free(map_replace); Fixes: 3ff5a4dc ("tools: bpftool: allow reuse of maps with bpftool prog load") Co-developed-by:
Wen Yang <wen.yang99@zte.com.cn> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Kamal Heib authored
[ Upstream commit 4f32fb92 ] rdmavt uses a crazy system that looses the type checking when assinging functions to struct ib_device function pointers. Because of this the signature to this function was not changed when the below commit revised things. Fix the signature so we are not calling a function pointer with a mismatched signature. Fixes: 477864c8 ("IB/core: Let create_ah return extended response to user") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Selvin Xavier authored
[ Upstream commit a6c66d6a ] When bnxt_re_ib_reg returns failure, the device structure gets freed. Driver tries to access the device pointer after it is freed. [ 4871.034744] Failed to register with netedev: 0xffffffa1 [ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea [ 4871.046430] ================================================================== [ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813 [ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ #42 [ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 4871.046449] Call Trace: [ 4871.046454] dump_stack+0x91/0xeb [ 4871.046458] print_address_description+0x6a/0x2a0 [ 4871.046461] kasan_report+0x176/0x2d0 [ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046470] process_one_work+0x216/0x5b0 [ 4871.046471] ? process_one_work+0x189/0x5b0 [ 4871.046475] worker_thread+0x4e/0x3d0 [ 4871.046479] kthread+0x10e/0x140 [ 4871.046480] ? process_one_work+0x5b0/0x5b0 [ 4871.046482] ? kthread_stop+0x220/0x220 [ 4871.046486] ret_from_fork+0x3a/0x50 [ 4871.046492] The buggy address belongs to the page: [ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 4871.046495] flags: 0x57ffffc0000000() [ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000 [ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4871.046501] page dumped because: kasan: bad access detected Avoid accessing the device structure once it is freed. Fixes: 497158aa ("RDMA/bnxt_re: Fix the ib_reg failure cleanup") Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Selvin Xavier authored
[ Upstream commit 3c4b1419 ] Driver doesn't release rtnl lock if registration with L2 driver (bnxt_re_register_netdev) fais and this causes hang while requesting for the next lock. [ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 371.635417] kworker/u48:1 D 0 634 2 0x80000000 [ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 371.635424] Call Trace: [ 371.635426] ? __schedule+0x36b/0xbd0 [ 371.635429] schedule+0x39/0x90 [ 371.635430] schedule_preempt_disabled+0x11/0x20 [ 371.635431] __mutex_lock+0x45b/0x9c0 [ 371.635433] ? __mutex_lock+0x16d/0x9c0 [ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635438] ? wake_up_klogd+0x37/0x40 [ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re] [ 371.635449] process_one_work+0x216/0x5b0 [ 371.635450] ? process_one_work+0x189/0x5b0 [ 371.635453] worker_thread+0x4e/0x3d0 [ 371.635455] kthread+0x10e/0x140 [ 371.635456] ? process_one_work+0x5b0/0x5b0 [ 371.635458] ? kthread_stop+0x220/0x220 [ 371.635460] ret_from_fork+0x3a/0x50 [ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds. [ 371.635478] Tainted: G B OE 4.20.0-rc1+ #42 [ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Release the rtnl_lock correctly in the failure path. Fixes: de5c95d0 ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization") Signed-off-by:
-
Parav Pandit authored
[ Upstream commit d52ef88a ] Currently when MAC address is changed, regardless of the netdev reg_state, GID entries are removed and added to reflect the new MAC address and new default GID entries. When a bonding device is used and the underlying PCI device is removed several netdevice events are generated. Two events of the interest are CHANGEADDR and UNREGISTER event on lower(slave) netdevice of the bond netdevice. Sometimes CHANGEADDR event is generated when netdev state is UNREGISTERING (after UNREGISTER event is generated). In this scenario, GID entries for default GIDs are added and never deleted because GID entries are deleted only when netdev state is < UNREGISTERED. This leads to non zero reference count on the netdevice. Due to this, PCI device unbind operation is getting stuck. To avoid it, when changing mac address, add GID entries only if netdev is in REGISTERED state. Fixes: 03db3a2d ("IB/core: Add RoCE GID table management") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 074fca3a ] Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the current fence will be SMALL instead of Normal Fence. Without this patch krping doesn't work on CX-5 devices and throws following error: The error messages are from CX5 driver are: (from server side) [ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434017] 00000000 00000000 00000000 00000000 [ 710.434018] 00000000 93003204 100000b8 000524d2 [ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32 Fixed the logic to set the correct fence type. Fixes: 6e8484c5 ("RDMA/mlx5: set UMR wqe fence according to HCA cap") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Robbie Ko authored
[ Upstream commit a4390aee ] When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves(). An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes. Parent snapshot: . |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/ Send snapshot: . |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/ When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved. When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations: 1) We issue the move operation for inode 274; 2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262; 3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot); 4) We issue the move operation for inode 269 (it was delayed by 262); 5) We issue the move operation for inode 257 (it was delayed by 272); 6) We issue the move operation for inode 260 (it was delayed by 272); 7) We issue the move operation for inode 258 (it was delayed by 269); 8) We issue the move operation for inode 264 (it was delayed by 257); 9) We issue the move operation for inode 271 (it was delayed by 258); 10) We issue the move operation for inode 263 (it was delayed by 264); 11) We issue the move operation for inode 268 (it was delayed by 271); 12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved; 13) We issue the move operation for inode 261 (it was delayed by 263); 14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12); 15) We issue the move operation for inode 267 (it was delayed by 268); 16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14; 17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop. So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode. A test case for fstests, with this reproducer, follows soon. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Wrote changelog with example and more clear explanation] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Romain Izard authored
[ Upstream commit 4ab7ca09 ] The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two different clocks for the peripherals in the SoC. The Static Memory controller is connected to the divided master clock. Unfortunately, the device tree does not correctly show this and uses the master clock directly. This clock is then used by the code for the NAND controller to calculate the timings for the controller, and we end up with slow NAND Flash access. Fix the device tree, and the performance of Flash access is improved. Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Manu Gautam authored
[ Upstream commit c88520db ] Tune1 register on sdm845 is used to update HSTX_TRIM with fused setting. Enable same by specifying update_tune1_with_efuse flag for sdm845, otherwise driver ends up programming tune2 register. Fixes: ef17f6e2 ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845") Signed-off-by:
Manu Gautam <mgautam@codeaurora.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Acked-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Manu Gautam authored
[ Upstream commit 6e34d358 ] Fix HSTX_TRIM tuning logic which instead of using fused value as HSTX_TRIM, incorrectly performs bitwise OR operation with existing default value. Fixes: ca04d9d3 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by:
-
Artem Savkov authored
[ Upstream commit 22566c16 ] Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS. Fix by copying the search string instead of modifying it in place. Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Artem Savkov authored
[ Upstream commit 0b9301fb ] If read_symbols() fails during second list traversal (the one dealing with ".cold" subfunctions) it frees the symbol, but never deletes it from the list/hash_table resulting in symbol being freed again in elf_close(). Fix it by just returning an error, leaving cleanup to elf_close(). Signed-off-by:
-
Keyon Jie authored
[ Upstream commit a3e620f8 ] The machine_quirk may return NULL which means the acpi entries should be skipped and search for next matched entry is needed, here add return check here and continue for NULL case. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Trent Piepho authored
[ Upstream commit 68bc10bf ] This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8 ("Merge branch 'pci/host-designware' into next"). Commit 4d107d3b ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop). While commit 886bc5ce ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop. When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ce was kept, which eliminated the link training check placed there by 4d107d3b. However, the version of imx6_pcie_link_up() from 4d107d3b was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link(). The result was the link training check got lost for the imx6 driver. Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression. Fixes: 562df5c8 ("Merge branch 'pci/host-designware' into next") Signed-off-by:
Trent Piepho <tpiepho@impinj.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit b01c1f69 ] When reporting on 'record' server we try to retrieve/use the mnt namespace of the profiled tasks. We use following API with cookie to hold the return namespace, roughly: nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc) setns(newns, 0); ... new ns related open.. ... nsinfo__mountns_exit(struct nscookie *nc) setns(nc->oldns) Once finished we setns to old namespace, which also sets the current working directory (cwd) to "/", trashing the cwd we had. This is mostly fine, because we use absolute paths almost everywhere, but it screws up 'perf diff': # perf diff failed to open perf.data: No such file or directory (try 'perf record' first) ... Adding the current working directory to be part of the cookie and restoring it in the nsinfo__mountns_exit call. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 843ff37b ("perf symbols: Find symbols in different mount namespace") Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org [ No need to check for NULL args for free(), use zfree() for struct members ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 09aaf681 ] Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by:
Yao Wang <wangyao@lemote.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Fixes: 39deb699 (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit b4e955e9 ] In the htable_create(), hinfo is allocated by vmalloc() So that if error occurred, hinfo should be freed. Fixes: 11d5f157 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit 53fffe29 ] If the ioprio capability check fails, we return without putting the file pointer. Fixes: d9a08a9e ("fs: Add aio iopriority support") Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit 569a933b ] Naresh reported an issue with the non-atomic memory allocation of cgroup local storage buffers: [ 73.047526] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421 [ 73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto [ 73.068342] INFO: lockdep is turned off. [ 73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted 4.20.0-rc2-next-20181113 #1 [ 73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 73.088018] Call Trace: [ 73.090463] dump_stack+0x70/0xa5 [ 73.093783] ___might_sleep+0x152/0x240 [ 73.097619] __might_sleep+0x4a/0x80 [ 73.101191] __kmalloc_node+0x1cf/0x2f0 [ 73.105031] ? cgroup_storage_update_elem+0x46/0x90 [ 73.109909] cgroup_storage_update_elem+0x46/0x90 cgroup_storage_update_elem() (as well as other update map update callbacks) is called with disabled preemption, so GFP_ATOMIC allocation should be used: e.g. alloc_htab_elem() in hashtab.c. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by:
Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Vadim Pasternak authored
[ Upstream commit 243cfe3f ] Fix macros for tacometer fault reading. This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34, which are about to be released to the customers. At the moment, none of them is at customers sites. Fixes: 65afb4c8 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 91b9deef ] I've been wondering still about omap2-mcspi related suspend and resume flakeyness and looks like we're missing calls to spi_master_suspend() and spi_master_resume(). Adding those and using pm_runtime_force_suspend() and pm_runtime_force_resume() makes things work for suspend and resume and allows us to stop using noirq suspend and resume. And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things further. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tzung-Bi Shih authored
[ Upstream commit 882eab6c ] Audio map are possible in wrong state before card->instantiated has been set to true. Imaging the following examples: time 1: at the beginning in:-1 in:-1 in:-1 in:-1 out:-1 out:-1 out:-1 out:-1 SIGGEN A B Spk time 2: after someone called snd_soc_dapm_new_widgets() (e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c) in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN A B Spk time 3: routes added in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN -----> A -----> B ---> Spk In the end, the path should be powered on but it did not. At time 3, "in" of SIGGEN and "out" of Spk did not propagate to their neighbors because snd_soc_dapm_add_path() will not invalidate the paths if the card has not instantiated (i.e. card->instantiated is false). To correct the state of audio map, recalculate the whole map forcely. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 76836fd3 ] The machine driver fails to probe in next-20181113 with: [ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered [ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517 ... [ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040 [ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040 [ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22 [ 3.715148] omap-abe-twl6040: probe of sound failed with error -22 Bisect pointed to a merge commit: first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master' and a diff between a working kernel does not reveal anything which would explain the change in behavior. Further investigation showed that on the second try of loading fails because the dai_link->platform is no longer NULL and it might be pointing to uninitialized memory. The fix is to move the snd_soc_dai_link and snd_soc_card inside of the abe_twl6040 struct, which is dynamically allocated every time the driver probes. Signed-off-by:
-
Nicolin Chen authored
[ Upstream commit 38cd989e ] The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
