- 07 Feb, 2015 4 commits
-
-
Joonyoung Shim authored
The exynos_drm_dmabuf.c file doesn't include any module feature and it isn't built to module. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Joonyoung Shim authored
The exynos drm driver has DRIVER_PRIME capability, then it's reasonable to support dmabuf as default. Remove DRM_EXYNOS_DMABUF config, it will prevent that user selects the option unnecessarily. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
If system provides IOMMU feature, Exynos DRM should use it by default, because the Exynos DRM subdrivers don't work correctly when Exynos IOMMU driver has been enabled and no IOMMU support has been compiled into Exynos DRM driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
Mixed need to have hdmi clock enabled to properly perform power on/off sequences, so add handling of this clock directly to the mixer driver. Dependency between hdmi clock and mixer module has been observed on Exynos4 based boards. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
- 05 Feb, 2015 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-amdkfd-next-fixes-2015-02-03' of git://people.freedesktop.org/~gabbayo/linux into drm-next - Fixing accounting of active queues - Preserving a register internal state * tag 'drm-amdkfd-next-fixes-2015-02-03' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Preserve CP_MQD_IQ_RPTR internal state drm/amdkfd: Fix dqm->queue_count tracking
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
drm-intel-next-2015-01-30: - chv rps improvements from Ville - atomic state handling prep work from Ander - execlist request tracking refactoring from Nick Hoath - forcewake code consolidation from Chris&Mika - fastboot plane config refactoring and skl support from Damien - some more skl pm patches all over (Damien) - refactor dsi code to use drm dsi helpers and drm_panel infrastructure (Jani) - first cut at experimental atomic plane updates (Matt Roper) - piles of smaller things all over, as usual * 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (102 commits) drm/i915: Remove bogus locking check in the hangcheck code drm/i915: Update DRIVER_DATE to 20150130 drm/i915: Use pipe_config's cpu_transcoder for reading encoder hw state drm/i915: Fix a use-after-free in intel_execlists_retire_requests drm/i915: Split shared dpll setup out of __intel_set_mode() drm/i915: Don't do posting reads on getting forcewake drm/i915: Do uncore early sanitize after domain init drm/i915: Handle CHV in vlv_set_rps_idle() drm/i915: Remove nested work in gpu error handling drm/i915/documentation: Add intel_uncore.c to drm.tmpl drm/i915/dsi: remove intel_dsi_cmd.c and the unused functions therein drm/i915/dsi: move dpi_send_cmd() to intel_dsi.c and make it static drm/i915/dsi: remove old read/write functions in favor of new stuff drm/i915/dsi: make the vbt panel driver use mipi_dsi_device for transfers drm/i915/dsi: add drm mipi dsi host support drm/i915/dsi: switch to drm_panel interface drm/i915/skl: Enabling PSR on Skylake Revert "drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES" drm/i915: Be consistent on printing seqnos drm/i915: Display current hangcheck status in debugfs ...
-
- 03 Feb, 2015 3 commits
-
-
Daniel Vetter authored
You can _never_ assert that a lock is not held, except in some very restricted corner cases where it's guranteed that your code is running single-threade (e.g. driver load before you've published any pointers leading to that lock). In addition the early return breaks a bunch of testcases since with highly concurrent hangcheck stress tests the reset fails to work and the test doesn't recover and time out. This regression has been introduced in commit b8d24a06 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Jan 28 17:03:14 2015 +0200 drm/i915: Remove nested work in gpu error handling Aside: It is possible to check whether a given task doesn't hold a lock, but only when lockdep is enabled, using the lockdep_assert_held stuff. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88908Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-
Ville Syrjälä authored
Currently when a mode is rejected the reason is printed as a raw number. Having to manually decode that to a enum drm_mode_status value is tiresome. Have the code do the decoding instead and print the result in a human readable format. Just having an array of strings indexed with the mode status doesn't work since the enum includes negative values. So we offset the status by +3 which makes all the indexes non-negative. Also add a bit of paranoia into the code to catch out of bounds accesses in case someone adds more enum values but forgets to update the code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chen Gang S authored
DRM_GEM_CMA_HELPER is depend on HAVE_DMA_ATTRS, or it will break the building. The related error (with allmodconfig under xtensa): CC [M] drivers/gpu/drm/drm_gem_cma_helper.o drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_create': drivers/gpu/drm/drm_gem_cma_helper.c:110:19: error: implicit declaration of function 'dma_alloc_writecombine' [-Werror=implicit-function-declaration] cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size, ^ drivers/gpu/drm/drm_gem_cma_helper.c:110:17: warning: assignment makes pointer from integer without a cast [-Wint-conversion] cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size, ^ drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_free_object': drivers/gpu/drm/drm_gem_cma_helper.c:193:3: error: implicit declaration of function 'dma_free_writecombine' [-Werror=implicit-function-declaration] dma_free_writecombine(gem_obj->dev->dev, cma_obj->base.size, ^ drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_mmap_obj': drivers/gpu/drm/drm_gem_cma_helper.c:330:8: error: implicit declaration of function 'dma_mmap_writecombine' [-Werror=implicit-function-declaration] ret = dma_mmap_writecombine(cma_obj->base.dev->dev, vma, ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 02 Feb, 2015 1 commit
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Rebase of main pull for 3.20. There was a mid-air collision between the bridge changes and msm eDP support. And atomic dpms support broke msm somewhat, due to using prepare/commit hooks in a different way. Compared to the initial pull req, this fixes up a memory leak caused by the bridge changes, rebases the eDP support on the bridge changes, and migrates to the atomic dpms hooks to fix the dpms breakage. Highlights (from original pull req): 1) YUV support for mdp4 and mdp5 2) eDP support 3) hw cursor support for mdp5[*] 4) additional hdmi support for apq8084 (snapdragon 805) 5) few bug fixes Note that I may have a later pull to enable hdmi hpd irqs.. but (un)fortunately I seem to have a particularly troublesome monitor.. I managed to figure out a workaround for spurious hpd disconnect irqs that works with some of my boards but not others, so holding off on that patch for now. There are also patches for HDCP support, but those are waiting on some scm patches outside of drm so I think waiting until 3.21 at this point. * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (22 commits) drm/msm: add moduleparam to disable fbdev drm/msm: fix build error with W=1 drm/msm/mdp5: Fix negative SMP block allocation drm/msm/hdmi: disallow interlaced drm/msm/atomic: fix issue with gnome-shell wayland drm/msm/mdp5: Add hardware cursor support drm/msm/hdmi: rework hdmi configurations, using dt_match[] drm/msm/hdmi: Add HDMI platform config for apq8084 drm/msm/hdmi: use dynamic allocation for hdmi resources drm/msm/mdp5: fix parameter type for mdp5_ctl_set_intf() drm/msm/dp: use link power helpers drm/msm: Add the eDP connector in msm drm driver (V2) drm/msm: Initial add eDP support in msm drm driver (v5) drm/msm/mdp4: add YUV format support drm/msm/mdp5: add NV12 support for MDP5 drm/msm/mdp: add common YUV information for MDP4/MDP5 drm/msm: update generated headers drm/msm: Do not BUG_ON(!spin_is_locked()) on UP drm/msm/hdmi: fix memory leak after bridge changes drm/msm: fix fallout of atomic dpms changes ...
-
- 01 Feb, 2015 22 commits
-
-
Rob Clark authored
Useful to avoid recompiling to disable fbdev. Useful because otherwise the first modeset happens under console_lock (ie. debugging sadness). Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Combining -Werror with all the extra warning flags that W=1 adds doesn't go so well. Especially because some of the warnings triggered are from included headers. So just drop -Werror. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
In case we request a number of SMP blocks which is lower than the already reserved blocks, we should not try to allocate a negative number, but 0 blocks instead. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
So after clarification from qcom, it seems mdp4 and mdp5 support *de*interlacing but not generating an interlaced signal. Which would explain why interlaced modes never worked properly. So disable in the one connector which was claiming to support interlaced. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
The gnome-shell wayland compositor triggers a setcrtc with an fb that is still being rendered, triggering the call to _wait_fence_interruptable(). But a NULL timeout means "don't wait, return -EBUSY if not ready", which in turn causes the setcrtc to fail. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Beeresh Gopal authored
This patch implements the hardware accelarated cursor support for MDP5 platforms. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
In the same idea mdp5_cfg was added, this change allows us to quickly add new instances, such as apq8084's HDMI in this case. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
This change add the regulator/clock configuration for MDP5 v1.3. This config is close to the one already existing for 8x74, except that one more regulator is needed (hpd-5v-en). Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
Instead of reporting BUG_ON when resources arrays are not dimensioned correctly, this patch does a dynamic allocation of these arrays. This is needed for the following patches that add a regulator for a new target. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
mdp5_ctl_set_intf()'s second argument should be "int", not "enum mdp5_intf". The passed in value is "intf", not "intf_id". Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Now that we have a helper for drm_dp_link_power_down(), use dp helpers instead of rolling our own. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Hai Li authored
Modified the hard-coded hdmi connector/encoder implementations in msm drm driver to support both edp and hdmi. V1: Initial change V2: Address Thierry's change Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Hai Li authored
This change adds a new eDP connector in msm drm driver. With this change, eDP panel can work with msm platform under drm framework. v1: Initial change v2: Address Rob's comments Use generated header file for register definitions Change to devm_* APIs v3: Address Thierry's comments and rebase on top of atomic changes Remove edp_bridge_mode_fixup Remove backlight control code and rely on pwm-backlight Remove continuous splash screen support for now Change to gpiod_* APIs v4: Fix kbuild test issue Signed-off-by: Hai Li <hali@codeaurora.org> [robclark: v5: rebase on drm_bridge changes in drm-next] Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Beeresh Gopal authored
The patch add support for YUV frame format for MDP4 platform. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
This change adds the NV12 format support for public planes. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
Both MDP4 and MDP5 share some code as far as YUV support is concerned. This change adds this information and will be followed by the actual MDP4 and MDP5 YUV support patches. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Resync from rnndb database, to pull in register defines for: * eDP * HDMI/HDCP * mdp4/mdp5 YUV support * mdp5 hw cursor support Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Bruno Prémont authored
On !SMP systems spinlocks do not exist. Thus checking of they are active will always fail. Use assert_spin_locked(lock); instead of BUG_ON(!spin_is_locked(lock)); to not BUG() on all UP systems. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> [robclark: drop stray ')'] Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
3d3f8b1f ("drm/bridge: make bridge registration independent of drm flow") resulted that the hdmi bridge object would be leaked at teardown. Just switch over to devm_kzalloc() as the easy way to solve this. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
As a result of atomic DPMS support, the various prepare/commit hooks get called in a way that msm dislikes. We were expecting prepare/commit to bracket a modeset, which is no longer the case. This was needed to hold various extra clk's (such as interface clks) on while we are touching registers, and in the case of mdp4 holding vblank enabled. The most straightforward way to deal with this, since we already have our own atomic_commit(), is to just handle prepare/commit internally to the driver (with some additional vfuncs for mdp4 vs mdp5), and switch everything over to instead use the new enable/disable hooks. It doesn't really change too much, despite the code motion. What used to be in the encoder/crtc dpms() fxns is split out into enable/disable. We should be able to drop our own enable-state tracking, as the atomic helpers should do this for us. But keeping that for the short term for extra debugging as atomic stablizes. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Laurent Pinchart authored
Only the legacy helpers use these entry points. Don't populate them with transitional helpers, since that just makes things more confusing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [robclark: reword commit msg] Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
We had _power_up(), but drivers also need to be able to power down. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
-
- 31 Jan, 2015 8 commits
-
-
Boris Brezillon authored
The atmel-hlcdc driver selects DRM_GEM_CMA_HELPER which makes use of symbols only available when HAVE_DMA_ATTRS is selected. Add a dependency on the ARM architecture which select this option. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
The msm gpu drivers depend on both the DT mechanism and the common clk handling code, if they are not enabled, we get a number of build errors: In file included from drivers/gpu/drm/msm/hdmi/hdmi.h:27:0, from drivers/gpu/drm/msm/hdmi/hdmi_bridge.c:18: drivers/gpu/drm/msm/msm_drv.h:45:24: fatal error: mach/board.h: No such file or directory #include <mach/board.h> ^ drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c:503:2: error: implicit declaration of function 'devm_clk_register' [-Werror=implicit-function-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Haixia Shi authored
When page flipping, we need to mark the new fb as active and unmark the active flag for the old fb (if different). Signed-off-by: Haixia Shi <hshi@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
The shmobile drm driver selects BACKLIGHT_CLASS_DEVICE as of 0a5a5499 "drm: shmobile: Add dependency on BACKLIGHT_CLASS_DEVICE", but that option in turn depends on BACKLIGHT_LCD_SUPPORT, so we actually have to select both, or alternatively use 'depends on BACKLIGHT_CLASS_DEVICE'. Further, the driver uses FB_SH_MOBILE_MERAM if that is enabled, but this breaks if MERAM is a module while the DRM driver is built-in. To solve this, add a dependency on "FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM", which forces DRM_SHMOBILE to be a module if FB_SH_MOBILE_MERAM set to 'm'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
The newly added sti driver requires the drm_panel helpers, and we get a link error if they are not enabled ERROR: "drm_panel_attach" [drivers/gpu/drm/sti/stidvo.ko] undefined! ERROR: "of_drm_find_panel" [drivers/gpu/drm/sti/stidvo.ko] undefined! This adds a 'select' statement as we have for the other drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
When the reset controller subsystem is disabled, this driver fails to build: drivers/gpu/drm/rockchip/rockchip_drm_vop.c: In function 'vop_initial': drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1267:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] The easiest solution is to add a dependency in Kconfig to avoid that case. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
The simple panel code uses the backlight interface to find a device, which fails when backlight is disabled: drivers/built-in.o: In function `panel_simple_platform_probe': :(.text+0xd3c48): undefined reference to `of_find_backlight_by_node' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
Arnd Bergmann authored
The sharp panel code uses the backlight interface to find a device, which fails when backlight is disabled: drivers/built-in.o: In function `sharp_panel_probe': :(.text+0x5ceac): undefined reference to `of_find_backlight_by_node' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
-