- 25 May, 2017 7 commits
-
-
Joe Thornber authored
commit 91bcdb92 upstream. These calls were the wrong way round in __write_initial_superblock. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit 1b0fb5a5 upstream. __get_memory_limit() tests if dm_bufio_cache_size changed and calls __cache_size_refresh() if it did. It takes dm_bufio_clients_lock while it already holds the client lock. However, lock ordering is violated because in cleanup_old_buffers() dm_bufio_clients_lock is taken before the client lock. This results in a possible deadlock and lockdep engine warning. Fix this deadlock by changing mutex_lock() to mutex_trylock(). If the lock can't be taken, it will be re-checked next time when a new buffer is allocated. Also add "unlikely" to the if condition, so that the optimizer assumes that the condition is false. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Vinothkumar Raja authored
commit 7d1fedb6 upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by:
Erez Zadok <ezk@fsl.cs.sunysb.edu> Signed-off-by:
Vinothkumar Raja <vinraja@cs.stonybrook.edu> Signed-off-by:
Nidhi Panpalia <npanpalia@cs.stonybrook.edu> Signed-off-by:
-
Vamsi Krishna Samavedam authored
commit 2f964780 upstream. Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by:
Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by:
-
Willy Tarreau authored
commit 3e21f4af upstream. The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By:
Roee Hay <roee.hay@hcl.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Johan Hovold authored
commit 46c319b8 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Alan Stern authored
commit 628c2893 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
- 20 May, 2017 33 commits
-
-
Greg Kroah-Hartman authored
-
Kangjie Lu authored
commit e4ec8cc8 upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Kangjie Lu authored
commit 9a47e9cf upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Kangjie Lu authored
commit cec8f96e upstream. The stack object “tread” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
Jann Horn authored
commit 29d64551 upstream. Until now, hitting this BUG_ON caused a recursive oops (because oops handling involves do_exit(), which calls into the scheduler, which in turn raises an oops), which caused stuff below the stack to be overwritten until a panic happened (e.g. via an oops in interrupt context, caused by the overwritten CPU index in the thread_info). Just panic directly. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [AmitP: Minor refactoring of upstream changes for linux-3.18.y] Signed-off-by:
-
Bjørn Mork authored
commit 4d06dd53 upstream. usbnet_link_change will call schedule_work and should be avoided if bind is failing. Otherwise we will end up with scheduled work referring to a netdev which has gone away. Instead of making the call conditional, we can just defer it to usbnet_probe, using the driver_info flag made for this purpose. Fixes: 8a34b0ae ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by:
Andrey Konovalov <andreyknvl@gmail.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Benjamin Tissoires authored
commit 50220dea upstream. Plugging a Logitech DJ receiver with KASAN activated raises a bunch of out-of-bound readings. The fields are allocated up to MAX_USAGE, meaning that potentially, we do not have enough fields to fit the incoming values. Add checks and silence KASAN. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Rainer Weikusat authored
commit a5527dda upstream. The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By:
Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Tested-by:
-
Eric Dumazet authored
commit 69ce6487 upstream. While cooking the sctp np->opt rcu fixes, I forgot to move one rcu_read_unlock() after the added rcu_dereference() in sctp_v6_get_dst() This gave lockdep warnings reported by Dave Jones. Fixes: c836a8ba ("ipv6: sctp: add rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
commit c836a8ba upstream. This patch completes the work I did in commit 45f6fad8 ("ipv6: add complete rcu protection around np->opt"), as I missed sctp part. This simply makes sure np->opt is used with proper RCU locking and accessors. Signed-off-by:
-
Calvin Owens authored
commit f3951a37 upstream. In sg_common_write(), we free the block request and return -ENODEV if the device is detached in the middle of the SG_IO ioctl(). Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we end up freeing rq->cmd in the already free rq object, and then free the object itself out from under the current user. This ends up corrupting random memory via the list_head on the rq object. The most common crash trace I saw is this: ------------[ cut here ]------------ kernel BUG at block/blk-core.c:1420! Call Trace: [<ffffffff81281eab>] blk_put_request+0x5b/0x80 [<ffffffffa0069e5b>] sg_finish_rem_req+0x6b/0x120 [sg] [<ffffffffa006bcb9>] sg_common_write.isra.14+0x459/0x5a0 [sg] [<ffffffff8125b328>] ? selinux_file_alloc_security+0x48/0x70 [<ffffffffa006bf95>] sg_new_write.isra.17+0x195/0x2d0 [sg] [<ffffffffa006cef4>] sg_ioctl+0x644/0xdb0 [sg] [<ffffffff81170f80>] do_vfs_ioctl+0x90/0x520 [<ffffffff81258967>] ? file_has_perm+0x97/0xb0 [<ffffffff811714a1>] SyS_ioctl+0x91/0xb0 [<ffffffff81602afb>] tracesys+0xdd/0xe2 RIP [<ffffffff81281e04>] __blk_put_request+0x154/0x1a0 The solution is straightforward: just set srp->rq to NULL in the failure branch so that sg_finish_rem_req() doesn't attempt to re-free it. Additionally, since sg_rq_end_io() will never be called on the object when this happens, we need to free memory backing ->cmd if it isn't embedded in the object itself. KASAN was extremely helpful in finding the root cause of this bug. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Lukas Czerner authored
commit 6934da92 upstream. There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd6 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd6Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
David Howells authored
commit 23c8a812 upstream. This fixes CVE-2016-0758. In the ASN.1 decoder, when the length field of an ASN.1 value is extracted, it isn't validated against the remaining amount of data before being added to the cursor. With a sufficiently large size indicated, the check: datalen - dp < 2 may then fail due to integer overflow. Fix this by checking the length indicated against the amount of remaining data in both places a definite length is determined. Whilst we're at it, make the following changes: (1) Check the maximum size of extended length does not exceed the capacity of the variable it's being stored in (len) rather than the type that variable is assumed to be (size_t). (2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the integer 0. (3) To reduce confusion, move the initialisation of len outside of: for (len = 0; n > 0; n--) { since it doesn't have anything to do with the loop counter n. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
-
David Howells authored
commit 0d62e9dd upstream. If the ASN.1 decoder is asked to parse a sequence of objects, non-optional matches get skipped if there's no more data to be had rather than a data-overrun error being reported. This is due to the code segment that decides whether to skip optional matches (ie. matches that could get ignored because an element is marked OPTIONAL in the grammar) due to a lack of data also skips non-optional elements if the data pointer has reached the end of the buffer. This can be tested with the data decoder for the new RSA akcipher algorithm that takes three non-optional integers. Currently, it skips the last integer if there is insufficient data. Without the fix, #defining DEBUG in asn1_decoder.c will show something like: next_op: pc=0/13 dp=0/270 C=0 J=0 - match? 30 30 00 - TAG: 30 266 CONS next_op: pc=2/13 dp=4/270 C=1 J=0 - match? 02 02 00 - TAG: 02 257 - LEAF: 257 next_op: pc=5/13 dp=265/270 C=1 J=0 - match? 02 02 00 - TAG: 02 3 - LEAF: 3 next_op: pc=8/13 dp=270/270 C=1 J=0 next_op: pc=11/13 dp=270/270 C=1 J=0 - end cons t=4 dp=270 l=270/270 The next_op line for pc=8/13 should be followed by a match line. This is not exploitable for X.509 certificates by means of shortening the message and fixing up the ASN.1 CONS tags because: (1) The relevant records being built up are cleared before use. (2) If the message is shortened sufficiently to remove the public key, the ASN.1 parse of the RSA key will fail quickly due to a lack of data. (3) Extracted signature data is either turned into MPIs (which cope with a 0 length) or is simpler integers specifying algoritms and suchlike (which can validly be 0); and (4) The AKID and SKID extensions are optional and their removal is handled without risking passing a NULL to asymmetric_key_generate_id(). (5) If the certificate is truncated sufficiently to remove the subject, issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons stack underflow' return. This is not exploitable for PKCS#7 messages by means of removal of elements from such a message from the tail end of a sequence: (1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable as detailed above. (2) The message digest content isn't used if it shows a NULL pointer, similarly, the authattrs aren't used if that shows a NULL pointer. (3) A missing signature results in a NULL MPI - which the MPI routines deal with. (4) If data is NULL, it is expected that the message has detached content and that is handled appropriately. (5) If the serialNumber is excised, the unconditional action associated with it will pick up the containing SEQUENCE instead, so no NULL pointer will be seen here. If both the issuer and the serialNumber are excised, the ASN.1 decode will fail with an 'Unexpected tag' return. In either case, there's no way to get to asymmetric_key_generate_id() with a NULL pointer. (6) Other fields are decoded to simple integers. Shortening the message to omit an algorithm ID field will cause checks on this to fail early in the verification process. This can also be tested by snipping objects off of the end of the ASN.1 stream such that mandatory tags are removed - or even from the end of internal SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be produced. Without this patch ERANGE or ENOPKG might be produced or the parse may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced later, depending on what gets snipped. Just snipping off the final BIT_STRING or OCTET_STRING from either sample should be a start since both are mandatory and neither will cause an EBADMSG without the patches Reported-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Peter Zijlstra authored
commit 12ca6ad2 upstream. There's a race on CPU unplug where we free the swevent hash array while it can still have events on. This will result in a use-after-free which is BAD. Simply do not free the hash array on unplug. This leaves the thing around and no use-after-free takes place. When the last swevent dies, we do a for_each_possible_cpu() iteration anyway to clean these up, at which time we'll free it, so no leakage will occur. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Suzuki K. Poulose authored
commit 8fff105e upstream. The perf core implicitly rejects events spanning multiple HW PMUs, as in these cases the event->ctx will differ. However this validation is performed after pmu::event_init() is called in perf_init_event(), and thus pmu::event_init() may be called with a group leader from a different HW PMU. The ARM64 PMU driver does not take this fact into account, and when validating groups assumes that it can call to_arm_pmu(event->pmu) for any HW event. When the event in question is from another HW PMU this is wrong, and results in dereferencing garbage. This patch updates the ARM64 PMU driver to first test for and reject events from other PMUs, moving the to_arm_pmu and related logic after this test. Fixes a crash triggered by perf_fuzzer on Linux-4.0-rc2, with a CCI PMU present: Bad mode in Synchronous Abort handler detected, code 0x86000006 -- IABT (current EL) CPU: 0 PID: 1371 Comm: perf_fuzzer Not tainted 3.19.0+ #249 Hardware name: V2F-1XV7 Cortex-A53x2 SMM (DT) task: ffffffc07c73a280 ti: ffffffc07b0a0000 task.ti: ffffffc07b0a0000 PC is at 0x0 LR is at validate_event+0x90/0xa8 pc : [<0000000000000000>] lr : [<ffffffc000090228>] pstate: 00000145 sp : ffffffc07b0a3ba0 [< (null)>] (null) [<ffffffc0000907d8>] armpmu_event_init+0x174/0x3cc [<ffffffc00015d870>] perf_try_init_event+0x34/0x70 [<ffffffc000164094>] perf_init_event+0xe0/0x10c [<ffffffc000164348>] perf_event_alloc+0x288/0x358 [<ffffffc000164c5c>] SyS_perf_event_open+0x464/0x98c Code: bad PC value Also cleans up the code to use the arm_pmu only when we know that we are dealing with an arm pmu event. Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Zijlstra authored
commit f63a8daa upstream. There have been a few reported issues wrt. the lack of locking around changing event->ctx. This patch tries to address those. It avoids the whole rwsem thing; and while it appears to work, please give it some thought in review. What I did fail at is sensible runtime checks on the use of event->ctx, the RCU use makes it very hard. Signed-off-by:
-
Mark Rutland authored
commit c623b33b upstream. As with x86, mark the sys_call_table const such that it will be placed in the .rodata section. This will cause attempts to modify the table (accidental or deliberate) to fail when strict page permissions are in place. In the absence of strict page permissions, there should be no functional change. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
NeilBrown authored
commit 0c9d5b12 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by:
Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449 ("md/raid1: add failfast handling for reads.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Björn Jacke authored
commit b704e70b upstream. - trailing space maps to 0xF028 - trailing period maps to 0xF029 This fix corrects the mapping of file names which have a trailing character that would otherwise be illegal (period or space) but is allowed by POSIX. Signed-off-by:
-
Steve French authored
commit 7db0a6ef upstream. Macs send the maximum buffer size in response on ioctl to validate negotiate security information, which causes us to fail the mount as the response buffer is larger than the expected response. Changed ioctl response processing to allow for padding of validate negotiate ioctl response and limit the maximum response size to maximum buffer size. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit 26c9cb66 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by:
-
Andrey Ryabinin authored
commit a5f6a6a9 upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Luis Henriques authored
commit eeca958d upstream. The ceph_inode_xattr needs to be released when removing an xattr. Easily reproducible running the 'generic/020' test from xfstests or simply by doing: attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test While there, also fix the error path. Here's the kmemleak splat: unreferenced object 0xffff88001f86fbc0 (size 64): comm "attr", pid 244, jiffies 4294904246 (age 98.464s) hex dump (first 32 bytes): 40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff @........28..... 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ backtrace: [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0 [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0 [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820 [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40 [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60 [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0 [<ffffffff8111fdd1>] removexattr+0x41/0x60 [<ffffffff8111fe65>] path_removexattr+0x75/0xa0 [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10 [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Michal Hocko authored
commit 81be3dee upstream. getxattr uses vmalloc to allocate memory if kzalloc fails. This is filled by vfs_getxattr and then copied to the userspace. vmalloc, however, doesn't zero out the memory so if the specific implementation of the xattr handler is sloppy we can theoretically expose a kernel memory. There is no real sign this is really the case but let's make sure this will not happen and use vzalloc instead. Fixes: 779302e6 ("fs/xattr.c:getxattr(): improve handling of allocation failures") Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.orgAcked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
