- 29 Sep, 2020 19 commits
-
-
Alexei Starovoitov authored
Alan Maguire says: ==================== This series attempts to provide a simple way for BPF programs (and in future other consumers) to utilize BPF Type Format (BTF) information to display kernel data structures in-kernel. The use case this functionality is applied to here is to support a snprintf()-like helper to copy a BTF representation of kernel data to a string, and a BPF seq file helper to display BTF data for an iterator. There is already support in kernel/bpf/btf.c for "show" functionality; the changes here generalize that support from seq-file specific verifier display to the more generic case and add another specific use case; rather than seq_printf()ing the show data, it is copied to a supplied string using a snprintf()-like function. Other future consumers of the show functionality could include a bpf_printk_btf() function which printk()ed the data instead. Oops messaging in particular would be an interesting application for such functionality. The above potential use case hints at a potential reply to a reasonable objection that such typed display should be solved by tracing programs, where the in-kernel tracing records data and the userspace program prints it out. While this is certainly the recommended approach for most cases, I believe having an in-kernel mechanism would be valuable also. Critically in BPF programs it greatly simplifies debugging and tracing of such data to invoking a simple helper. One challenge raised in an earlier iteration of this work - where the BTF printing was implemented as a printk() format specifier - was that the amount of data printed per printk() was large, and other format specifiers were far simpler. Here we sidestep that concern by printing components of the BTF representation as we go for the seq file case, and in the string case the snprintf()-like operation is intended to be a basis for perf event or ringbuf output. The reasons for avoiding bpf_trace_printk are that 1. bpf_trace_printk() strings are restricted in size and cannot display anything beyond trivial data structures; and 2. bpf_trace_printk() is for debugging purposes only. As Alexei suggested, a bpf_trace_puts() helper could solve this in the future but it still would be limited by the 1000 byte limit for traced strings. Default output for an sk_buff looks like this (zeroed fields are omitted): (struct sk_buff){ .transport_header = (__u16)65535, .mac_header = (__u16)65535, .end = (sk_buff_data_t)192, .head = (unsigned char *)0x000000007524fd8b, .data = (unsigned char *)0x000000007524fd8b, .truesize = (unsigned int)768, .users = (refcount_t){ .refs = (atomic_t){ .counter = (int)1, }, }, } Flags can modify aspects of output format; see patch 3 for more details. Changes since v6: - Updated safe data size to 32, object name size to 80. This increases the number of safe copies done, but performance is not a key goal here. WRT name size the largest type name length in bpf-next according to "pahole -s" is 64 bytes, so that still gives room for additional type qualifiers, parens etc within the name limit (Alexei, patch 2) - Remove inlines and converted as many #defines to functions as was possible. In a few cases - btf_show_type_value[s]() specifically - I left these as macros as btf_show_type_value[s]() prepends and appends format strings to the format specifier (in order to include indentation, delimiters etc so a macro makes that simpler (Alexei, patch 2) - Handle btf_resolve_size() error in btf_show_obj_safe() (Alexei, patch 2) - Removed clang loop unroll in BTF snprintf test (Alexei) - switched to using bpf_core_type_id_kernel(type) as suggested by Andrii, and Alexei noted that __builtin_btf_type_id(,1) should be used (patch 4) - Added skip logic if __builtin_btf_type_id is not available (patches 4,8) - Bumped limits on bpf iters to support printing larger structures (Alexei, patch 5) - Updated overflow bpf_iter tests to reflect new iter max size (patch 6) - Updated seq helper to use type id only (Alexei, patch 7) - Updated BTF task iter test to use task struct instead of struct fs_struct since new limits allow a task_struct to be displayed (patch 8) - Fixed E2BIG handling in iter task (Alexei, patch 8) Changes since v5: - Moved btf print prepare into patch 3, type show seq with flags into patch 2 (Alexei, patches 2,3) - Fixed build bot warnings around static declarations and printf attributes - Renamed functions to snprintf_btf/seq_printf_btf (Alexei, patches 3-6) Changes since v4: - Changed approach from a BPF trace event-centric design to one utilizing a snprintf()-like helper and an iter helper (Alexei, patches 3,5) - Added tests to verify BTF output (patch 4) - Added support to tests for verifying BTF type_id-based display as well as type name via __builtin_btf_type_id (Andrii, patch 4). - Augmented task iter tests to cover the BTF-based seq helper. Because a task_struct's BTF-based representation would overflow the PAGE_SIZE limit on iterator data, the "struct fs_struct" (task->fs) is displayed for each task instead (Alexei, patch 6). Changes since v3: - Moved to RFC since the approach is different (and bpf-next is closed) - Rather than using a printk() format specifier as the means of invoking BTF-enabled display, a dedicated BPF helper is used. This solves the issue of printk() having to output large amounts of data using a complex mechanism such as BTF traversal, but still provides a way for the display of such data to be achieved via BPF programs. Future work could include a bpf_printk_btf() function to invoke display via printk() where the elements of a data structure are printk()ed one at a time. Thanks to Petr Mladek, Andy Shevchenko and Rasmus Villemoes who took time to look at the earlier printk() format-specifier-focused version of this and provided feedback clarifying the problems with that approach. - Added trace id to the bpf_trace_printk events as a means of separating output from standard bpf_trace_printk() events, ensuring it can be easily parsed by the reader. - Added bpf_trace_btf() helper tests which do simple verification of the various display options. Changes since v2: - Alexei and Yonghong suggested it would be good to use probe_kernel_read() on to-be-shown data to ensure safety during operation. Safe copy via probe_kernel_read() to a buffer object in "struct btf_show" is used to support this. A few different approaches were explored including dynamic allocation and per-cpu buffers. The downside of dynamic allocation is that it would be done during BPF program execution for bpf_trace_printk()s using %pT format specifiers. The problem with per-cpu buffers is we'd have to manage preemption and since the display of an object occurs over an extended period and in printk context where we'd rather not change preemption status, it seemed tricky to manage buffer safety while considering preemption. The approach of utilizing stack buffer space via the "struct btf_show" seemed like the simplest approach. The stack size of the associated functions which have a "struct btf_show" on their stack to support show operation (btf_type_snprintf_show() and btf_type_seq_show()) stays under 500 bytes. The compromise here is the safe buffer we use is small - 256 bytes - and as a result multiple probe_kernel_read()s are needed for larger objects. Most objects of interest are smaller than this (e.g. "struct sk_buff" is 224 bytes), and while task_struct is a notable exception at ~8K, performance is not the priority for BTF-based display. (Alexei and Yonghong, patch 2). - safe buffer use is the default behaviour (and is mandatory for BPF) but unsafe display - meaning no safe copy is done and we operate on the object itself - is supported via a 'u' option. - pointers are prefixed with 0x for clarity (Alexei, patch 2) - added additional comments and explanations around BTF show code, especially around determining whether objects such zeroed. Also tried to comment safe object scheme used. (Yonghong, patch 2) - added late_initcall() to initialize vmlinux BTF so that it would not have to be initialized during printk operation (Alexei, patch 5) - removed CONFIG_BTF_PRINTF config option as it is not needed; CONFIG_DEBUG_INFO_BTF can be used to gate test behaviour and determining behaviour of type-based printk can be done via retrieval of BTF data; if it's not there BTF was unavailable or broken (Alexei, patches 4,6) - fix bpf_trace_printk test to use vmlinux.h and globals via skeleton infrastructure, removing need for perf events (Andrii, patch 8) Changes since v1: - changed format to be more drgn-like, rendering indented type info along with type names by default (Alexei) - zeroed values are omitted (Arnaldo) by default unless the '0' modifier is specified (Alexei) - added an option to print pointer values without obfuscation. The reason to do this is the sysctls controlling pointer display are likely to be irrelevant in many if not most tracing contexts. Some questions on this in the outstanding questions section below... - reworked printk format specifer so that we no longer rely on format %pT<type> but instead use a struct * which contains type information (Rasmus). This simplifies the printk parsing, makes use more dynamic and also allows specification by BTF id as well as name. - removed incorrect patch which tried to fix dereferencing of resolved BTF info for vmlinux; instead we skip modifiers for the relevant case (array element type determination) (Alexei). - fixed issues with negative snprintf format length (Rasmus) - added test cases for various data structure formats; base types, typedefs, structs, etc. - tests now iterate through all typedef, enum, struct and unions defined for vmlinux BTF and render a version of the target dummy value which is either all zeros or all 0xff values; the idea is this exercises the "skip if zero" and "print everything" cases. - added support in BPF for using the %pT format specifier in bpf_trace_printk() - added BPF tests which ensure %pT format specifier use works (Alexei). ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Alan Maguire authored
Add a test verifying iterating over tasks and displaying BTF representation of task_struct succeeds. Suggested-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
Alan Maguire authored
A helper is added to allow seq file writing of kernel data structures using vmlinux BTF. Its signature is long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); Flags and struct btf_ptr definitions/use are identical to the bpf_snprintf_btf helper, and the helper returns 0 on success or a negative error value. Suggested-by: -
Alan Maguire authored
bpf iter size increase to PAGE_SIZE << 3 means overflow tests assuming page size need to be bumped also. Signed-off-by:
-
Alan Maguire authored
BPF iter size is limited to PAGE_SIZE; if we wish to display BTF-based representations of larger kernel data structures such as task_struct, this will be insufficient. Suggested-by:
-
Alan Maguire authored
Tests verifying snprintf()ing of various data structures, flags combinations using a tp_btf program. Tests are skipped if __builtin_btf_type_id is not available to retrieve BTF type ids. Signed-off-by:
-
Alan Maguire authored
A helper is added to support tracing kernel type information in BPF using the BPF Type Format (BTF). Its signature is long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); struct btf_ptr * specifies - a pointer to the data to be traced - the BTF id of the type of data pointed to - a flags field is provided for future use; these flags are not to be confused with the BTF_F_* flags below that control how the btf_ptr is displayed; the flags member of the struct btf_ptr may be used to disambiguate types in kernel versus module BTF, etc; the main distinction is the flags relate to the type and information needed in identifying it; not how it is displayed. For example a BPF program with a struct sk_buff *skb could do the following: static struct btf_ptr b = { }; b.ptr = skb; b.type_id = __builtin_btf_type_id(struct sk_buff, 1); bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0); Default output looks like this: (struct sk_buff){ .transport_header = (__u16)65535, .mac_header = (__u16)65535, .end = (sk_buff_data_t)192, .head = (unsigned char *)0x000000007524fd8b, .data = (unsigned char *)0x000000007524fd8b, .truesize = (unsigned int)768, .users = (refcount_t){ .refs = (atomic_t){ .counter = (int)1, }, }, } Flags modifying display are as follows: - BTF_F_COMPACT: no formatting around type information - BTF_F_NONAME: no struct/union member names/types - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; equivalent to %px. - BTF_F_ZERO: show zero-valued struct/union members; they are not displayed by default Signed-off-by: -
Alan Maguire authored
generalize the "seq_show" seq file support in btf.c to support a generic show callback of which we support two instances; the current seq file show, and a show with snprintf() behaviour which instead writes the type data to a supplied string. Both classes of show function call btf_type_show() with different targets; the seq file or the string to be written. In the string case we need to track additional data - length left in string to write and length to return that we would have written (a la snprintf). By default show will display type information, field members and their types and values etc, and the information is indented based upon structure depth. Zeroed fields are omitted. Show however supports flags which modify its behaviour: BTF_SHOW_COMPACT - suppress newline/indent. BTF_SHOW_NONAME - suppress show of type and member names. BTF_SHOW_PTR_RAW - do not obfuscate pointer values. BTF_SHOW_UNSAFE - do not copy data to safe buffer before display. BTF_SHOW_ZERO - show zeroed values (by default they are not shown). Signed-off-by:
-
Alan Maguire authored
It will be used later for BPF structure display support Signed-off-by:
-
Andrii Nakryiko authored
Add an ability to create an empty BTF object from scratch. This is going to be used by pahole for BTF encoding. And also by selftest for convenient creation of BTF objects. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200926011357.2366158-7-andriin@fb.com
-
Andrii Nakryiko authored
Allow internal BTF representation to switch from default read-only mode, in which raw BTF data is a single non-modifiable block of memory with BTF header, types, and strings layed out sequentially and contiguously in memory, into a writable representation with types and strings data split out into separate memory regions, that can be dynamically expanded. Such writable internal representation is transparent to users of libbpf APIs, but allows to append new types and strings at the end of BTF, which is a typical use case when generating BTF programmatically. All the basic guarantees of BTF types and strings layout is preserved, i.e., user can get `struct btf_type *` pointer and read it directly. Such btf_type pointers might be invalidated if BTF is modified, so some care is required in such mixed read/write scenarios. Switch from read-only to writable configuration happens automatically the first time when user attempts to modify BTF by either adding a new type or new string. It is still possible to get raw BTF data, which is a single piece of memory that can be persisted in ELF section or into a file as raw BTF. Such raw data memory is also still owned by BTF and will be freed either when BTF object is freed or if another modification to BTF happens, as any modification invalidates BTF raw representation. This patch adds the first two BTF manipulation APIs: btf__add_str(), which allows to add arbitrary strings to BTF string section, and btf__find_str() which allows to find existing string offset, but not add it if it's missing. All the added strings are automatically deduplicated. This is achieved by maintaining an additional string lookup index for all unique strings. Such index is built when BTF is switched to modifiable mode. If at that time BTF strings section contained duplicate strings, they are not de-duplicated. This is done specifically to not modify the existing content of BTF (types, their string offsets, etc), which can cause confusion and is especially important property if there is struct btf_ext associated with struct btf. By following this "imperfect deduplication" process, btf_ext is kept consitent and correct. If deduplication of strings is necessary, it can be forced by doing BTF deduplication, at which point all the strings will be eagerly deduplicated and all string offsets both in struct btf and struct btf_ext will be updated. Signed-off-by:
-
Andrii Nakryiko authored
Calculating a hash of zero-terminated string is a common need when using hashmap, so extract it for reuse. Signed-off-by:
-
Andrii Nakryiko authored
Managing dynamically-sized array is a common, but not trivial functionality, which significant amount of logic and code to implement properly. So instead of re-implementing it all the time, extract it into a helper function ans reuse. Signed-off-by:
-
Andrii Nakryiko authored
Refactor internals of struct btf to remove assumptions that BTF header, type data, and string data are layed out contiguously in a memory in a single memory allocation. Now we have three separate pointers pointing to the start of each respective are: header, types, strings. In the next patches, these pointers will be re-assigned to point to independently allocated memory areas, if BTF needs to be modified. Signed-off-by:
-
Andrii Nakryiko authored
Refactor implementation of internal BTF type index to not use direct pointers. Instead it uses offset relative to the start of types data section. This allows for types data to be reallocatable, enabling implementation of modifiable BTF. As now getting type by ID has an extra indirection step, convert all internal type lookups to a new helper btf_type_id(), that returns non-const pointer to a type by its ID. Signed-off-by:
-
Toke Høiland-Jørgensen authored
The test_overhead prog_test included an fmod_ret program that attached to __set_task_comm() in the kernel. However, this function was never listed as allowed for return modification, so this only worked because of the verifier skipping tests when a trampoline already existed for the attach point. Now that the verifier checks have been fixed, remove fmod_ret from the test so it works again. Fixes: 4eaf0b5c ("selftest/bpf: Fmod_ret prog and implement test_overhead as part of bench") Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
The check_attach_btf_id() function really does three things: 1. It performs a bunch of checks on the program to ensure that the attachment is valid. 2. It stores a bunch of state about the attachment being requested in the verifier environment and struct bpf_prog objects. 3. It allocates a trampoline for the attachment. This patch splits out (1.) and (3.) into separate functions which will perform the checks, but return the computed values instead of directly modifying the environment. This is done in preparation for reusing the checks when the actual attachment is happening, which will allow tracing programs to have multiple (compatible) attachments. This also fixes a bug where a bunch of checks were skipped if a trampoline already existed for the tracing target. Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs") Acked-by:
-
Toke Høiland-Jørgensen authored
In preparation for moving code around, change a bunch of references to env->log (and the verbose() logging helper) to use bpf_log() and a direct pointer to struct bpf_verifier_log. While we're touching the function signature, mark the 'prog' argument to bpf_check_type_match() as const. Also enhance the bpf_verifier_log_needed() check to handle NULL pointers for the log struct so we can re-use the code with logging disabled. Acked-by:
-
Toke Høiland-Jørgensen authored
From the checks and commit messages for modify_return, it seems it was never the intention that it should be possible to attach a tracing program with expected_attach_type == BPF_MODIFY_RETURN to another BPF program. However, check_attach_modify_return() will only look at the function name, so if the target function starts with "security_", the attach will be allowed even for bpf2bpf attachment. Fix this oversight by also blocking the modification if a target program is supplied. Fixes: 18644cec ("bpf: Fix use-after-free in fmod_ret check") Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Acked-by:
-
- 28 Sep, 2020 10 commits
-
-
Alexei Starovoitov authored
Lorenz Bauer says: ==================== Changes in v2: - Check sk_fullsock in map_update_elem (Martin) Enable calling map_update_elem on sockmaps from bpf_iter context. This in turn allows us to copy a sockmap by iterating its elements. The change itself is tiny, all thanks to the ground work from Martin, whose series [1] this patch is based on. I updated the tests to do some copying, and also included two cleanups. I'm sending this out now rather than when Martin's series has landed because I hope this can get in before the merge window (potentially) closes this weekend. 1: https://lore.kernel.org/bpf/20200925000337.3853598-1-kafai@fb.com/ ==================== Signed-off-by:
-
Lorenz Bauer authored
Since we can now call map_update_elem(sockmap) from bpf_iter context it's possible to copy a sockmap or sockhash in the kernel. Add a selftest which exercises this. Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
-
Lorenz Bauer authored
The shared header to define SOCKMAP_MAX_ENTRIES is a bit overkill. Dynamically allocate the sock_fd array based on bpf_map__max_entries instead. Suggested-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Lorenz Bauer authored
We compare socket cookies to ensure that insertion into a sockmap worked. Pull this out into a helper function for use in other tests. Signed-off-by:
-
Lorenz Bauer authored
Allow passing a pointer to a BTF struct sock_common* when updating a sockmap or sockhash. Since BTF pointers can fault and therefore be NULL at runtime we need to add an additional !sk check to sock_map_update_elem. Since we may be passed a request or timewait socket we also need to check sk_fullsock. Doing this allows calling map_update_elem on sockmap from bpf_iter context, which uses BTF pointers. Signed-off-by:
-
Lorenzo Bianconi authored
Get rid of bpf_cpu_map_entry pointer in cpu_map_build_skb routine signature since it is no longer needed. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org
-
Song Liu authored
This test runs test_run for raw_tracepoint program. The test covers ctx input, retval output, and running on correct cpu. Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Song Liu authored
Add bpf_prog_test_run_opts() with support of new fields in bpf_attr.test, namely, flags and cpu. Also extend _opts operations to support outputs via opts. Signed-off-by:
-
Song Liu authored
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs the target program on a specific CPU. This is achieved by a new flag in bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for BPF programs that handle perf_event and other percpu resources, as the program can access these resource locally. Signed-off-by:
-
Magnus Karlsson authored
Fix possible crash in socket_release when an out-of-memory error has occurred in the bind call. If a socket using the XDP_SHARED_UMEM flag encountered an error in xp_create_and_assign_umem, the bind code jumped to the exit routine but erroneously forgot to set the err value before jumping. This meant that the exit routine thought the setup went well and set the state of the socket to XSK_BOUND. The xsk socket release code will then, at application exit, think that this is a properly setup socket, when it is not, leading to a crash when all fields in the socket have in fact not been initialized properly. Fix this by setting the err variable in xsk_bind so that the socket is not set to XSK_BOUND which leads to the clean-up in xsk_release not being triggered. Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem") Reported-by: syzbot+ddc7b4944bc61da19b81@syzkaller.appspotmail.com Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
- 26 Sep, 2020 1 commit
-
-
John Fastabend authored
The meaning of PTR_TO_BTF_ID_OR_NULL differs slightly from other types denoted with the *_OR_NULL type. For example the types PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL can be used for branch analysis because the type PTR_TO_SOCKET is guaranteed to _not_ have a null value. In contrast PTR_TO_BTF_ID and BTF_TO_BTF_ID_OR_NULL have slightly different meanings. A PTR_TO_BTF_TO_ID may be a pointer to NULL value, but it is safe to read this pointer in the program context because the program context will handle any faults. The fallout is for PTR_TO_BTF_ID the verifier can assume reads are safe, but can not use the type in branch analysis. Additionally, authors need to be extra careful when passing PTR_TO_BTF_ID into helpers. In general helpers consuming type PTR_TO_BTF_ID will need to assume it may be null. Seeing the above is not obvious to readers without the back knowledge lets add a comment in the type definition. Editorial comment, as networking and tracing programs get closer and more tightly merged we may need to consider a new type that we can ensure is non-null for branch analysis and also passing into helpers. Signed-off-by:
-
- 25 Sep, 2020 10 commits
-
-
John Fastabend authored
If we AND two values together that are known in the 32bit subregs, but not known in the 64bit registers we rely on the tnum value to report the 32bit subreg is known. And do not use mark_reg_known() directly from scalar32_min_max_and() Add an AND test to cover the case with known 32bit subreg, but unknown 64bit reg. Signed-off-by:
-
John Fastabend authored
In BPF_AND and BPF_OR alu cases we have this pattern when the src and dst tnum is a constant. 1 dst_reg->var_off = tnum_[op](dst_reg->var_off, src_reg.var_off) 2 scalar32_min_max_[op] 3 if (known) return 4 scalar_min_max_[op] 5 if (known) 6 __mark_reg_known(dst_reg, dst_reg->var_off.value [op] src_reg.var_off.value) The result is in 1 we calculate the var_off value and store it in the dst_reg. Then in 6 we duplicate this logic doing the op again on the value. The duplication comes from the the tnum_[op] handlers because they have already done the value calcuation. For example this is tnum_and(). struct tnum tnum_and(struct tnum a, struct tnum b) { u64 alpha, beta, v; alpha = a.value | a.mask; beta = b.value | b.mask; v = a.value & b.value; return TNUM(v, alpha & beta & ~v); } So lets remove the redundant op calculation. Its confusing for readers and unnecessary. Its also not harmful because those ops have the property, r1 & r1 = r1 and r1 | r1 = r1. Signed-off-by: -
Alexei Starovoitov authored
Martin KaFai Lau says: ==================== This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct tcp_sock". Patch 2 has the details on the use case. v3: - Pass arg_btf_id instead of fn into check_reg_type() in Patch 1 (Lorenz) - Move arg_btf_id from func_proto to struct bpf_reg_types in Patch 2 (Lorenz) - Remove test_sock_fields from .gitignore in Patch 8 (Andrii) - Add tests to have better coverage on the modified helpers (Alexei) Patch 13 is added. - Use "void *sk" as the helper argument in UAPI bpf.h v3: - ARG_PTR_TO_SOCK_COMMON_OR_NULL was attempted in v2. The _OR_NULL was needed because the PTR_TO_BTF_ID could be NULL but note that a could be NULL PTR_TO_BTF_ID is not a scalar NULL to the verifier. "_OR_NULL" implicitly gives an expectation that the helper can take a scalar NULL which does not make sense in most (except one) helpers. Passing scalar NULL should be rejected at the verification time. Thus, this patch uses ARG_PTR_TO_BTF_ID_SOCK_COMMON to specify that the helper can take both the btf-id ptr or the legacy PTR_TO_SOCK_COMMON but not scalar NULL. It requires the func_proto to explicitly specify the arg_btf_id such that there is a very clear expectation that the helper can handle a NULL PTR_TO_BTF_ID. v2: - Add ARG_PTR_TO_SOCK_COMMON_OR_NULL (Lorenz) ==================== Signed-off-by: -
Martin KaFai Lau authored
This patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches: 1. bpf_sk_release() 2. bpf_sk_assign() 3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock() 4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Martin KaFai Lau authored
The enum tcp_ca_state is available in <linux/tcp.h>. Remove it from the bpf_tcp_helpers.h to avoid conflict when the bpf prog needs to include both both <linux/tcp.h> and bpf_tcp_helpers.h. Modify the bpf_cubic.c and bpf_dctcp.c to use <linux/tcp.h> instead. The <linux/stddef.h> is needed by <linux/tcp.h>. Signed-off-by:
-
Martin KaFai Lau authored
This test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp". Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get(). It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id() with the "ktp". To do that, a parent cgroup and a child cgroup are created. The bpf prog is attached to the child cgroup. Signed-off-by:
-
Martin KaFai Lau authored
This patch uses start_server() and connect_to_fd() from network_helpers.h to remove the network testing boiler plate codes. epoll is no longer needed also since the timeout has already been taken care of also. Signed-off-by:
-
Martin KaFai Lau authored
skel is used. Global variables are used to store the result from bpf prog. addr_map, sock_result_map, and tcp_sock_result_map are gone. Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp, listen_sk, srv_sk, and cli_sk are added. Because of that, bpf_addr_array_idx and bpf_result_array_idx are also no longer needed. CHECK() macro from test_progs.h is reused and bail as soon as a CHECK failure. shutdown() is used to ensure the previous data-ack is received. The bytes_acked, bytes_received, and the pkt_out_cnt checks are using "<" to accommodate the final ack may not have been received/sent. It is enough since it is not the focus of this test. The sk local storage is all initialized to 0xeB9F now, so the check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to keep things simple. The next patch will reuse helpers from network_helpers.h to simplify things further. Signed-off-by:
-
Martin KaFai Lau authored
This is a mechanical change to 1. move test_sock_fields.c to prog_tests/sock_fields.c 2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c Minimal change is made to the code itself. Next patch will make changes to use new ways of writing test, e.g. use skel and global variables. Signed-off-by:
-
Martin KaFai Lau authored
The patch tests for: 1. bpf_sk_release() can be called on a tcp_sock btf_id ptr. 2. Ensure the tcp_sock btf_id pointer cannot be used after bpf_sk_release(). Signed-off-by:
-
