Expose new driver-specific "acl_region_rehash_interval" devlink param
which would allow user to alter default ACL region rehash interval.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the hints are returned, the migration should be started. For that to
happen, there is a need to create a second physical region in TCAM with
new ERP set by passing the hints and then move chunk by chunk,
entry by entry.

During the transition, two lookups will occur. One in old region and
another in new region. The highest priority rule will be chosen.

In an unlikely case that the migration will fail and also rollback to
original region will fail the vregion will become in bad state.
Everything will work, only no future rehash will be possible. In a
follow-up work, this can be resolved by trying to resume the rollback
in delayed work and repair the vregion.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For Spectrum-2 this allows parallel lookups in multiple regions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hints priv comes from ERP code and it is possible to obtain it from
TCAM code. Add arg to appropriate functions so the hints
priv could be passed back down to ERP code. Pass NULL now as the
follow-up patches would pass an actual hints priv pointer.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce an initial implementation of rehash logic in ERP code.
Currently, the rehash is considered as needed only in case number of
roots in the hints is smaller than the number of roots actually in use.
In that case return hints pointer and let it be obtained through the
callpath through the Spectrum-2 TCAM op.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do the split of entry struct so the new entry struct is related to the
actual HW entry, whereas ventry struct is a SW abstration of that.
This split prepares possibility for ventry to hold 2 HW entries which
is needed for region ERP rehash flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do the split of chunk struct so the new chunk struct is related to the
actual HW chunk (differs between Spectrum and Spectrum-2),
whereas vchunk struct is a SW abstraction of that. This split
prepares possibility for vchunk to hold 2 HW chunks which is needed
for region ERP rehash flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do the split of region struct so the new region struct is related to the
actual HW region, whereas vregion struct is a SW abstration of that.
This split prepares possibility for vregion to hold 2 HW regions which
is needed for region ERP rehash flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Count number of roots and add it to stats. It is handy for the library
user to have this stats available as it can act upon it without
counting roots itself.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement simple greedy algo to find more optimized root-delta tree for
a given objagg instance. This "hints" can be used by a driver to:
1) check if the hints are better (driver's choice) than the original
   objagg tree. Driver does comparison of objagg stats and hints stats.
2) use the hints to create a new objagg instance which will construct
   the root-delta tree according to the passed hints. Currently, only a
   simple greedy algorithm is implemented. Basically it finds the roots
   according to the maximal possible user count including deltas.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, user can do dump or get of param values right after the
devlink params are registered. However the driver may not be initialized
which is an issue. The same problem happens during notification
upon param registration. Allow driver to publish devlink params
whenever it is ready to handle get() ops. Note that this cannot
be resolved by init reordering, as the "driverinit" params have
to be available before the driver is initialized (it needs the param
values there).
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.

Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Notice that, in this particular case, the fall-through annotation
is placed at the beginning of the code comment, which is what
GCC is expecting to find.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Static checker warning complains on uninitialized variable:

        drivers/net/ethernet/netronome/nfp/flower/action.c:618 nfp_fl_pedit()
        error: uninitialized symbol 'idx'.

Which is actually never used from the functions that take it as
parameter. Remove it.

Fixes: 73867881 ("drivers: net: use flow action infrastructure")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Paul Fox <pfox@solarflare.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "This pull request is dedicated to the upcoming snowpocalypse parts 2
  and 3 in the Pacific Northwest:

   1) Drop profiles are broken because some drivers use dev_kfree_skb*
      instead of dev_consume_skb*, from Yang Wei.

   2) Fix IWLWIFI kconfig deps, from Luca Coelho.

   3) Fix percpu maps updating in bpftool, from Paolo Abeni.

   4) Missing station release in batman-adv, from Felix Fietkau.

   5) Fix some networking compat ioctl bugs, from Johannes Berg.

   6) ucc_geth must reset the BQL queue state when stopping the device,
      from Mathias Thore.

   7) Several XDP bug fixes in virtio_net from Toshiaki Makita.

   8) TSO packets must be sent always on queue 0 in stmmac, from Jose
      Abreu.

   9) Fix socket refcounting bug in RDS, from Eric Dumazet.

  10) Handle sparse cpu allocations in bpf selftests, from Martynas
      Pumputis.

  11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
      Feitkau.

  12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
      Greg Kroah-Hartman.

  13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
      ccid, from Eric Dumazet.

  14) Need to reload WoL password into bcmsysport device after deep
      sleeps, from Florian Fainelli.

  15) Remove filter from mask before freeing in cls_flower, from Petr
      Machata.

  16) Missing release and use after free in error paths of s390 qeth
      code, from Julian Wiedmann.

  17) Fix lockdep false positive in dsa code, from Marc Zyngier.

  18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.

  19) Fix EQ firmware assert in qed driver, from Manish Chopra.

  20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: dsa: b53: Fix for failure when irq is not defined in dt
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  net: Don't default Cavium PTP driver to 'y'
  net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net/mlx5e: Don't overwrite pedit action when multiple pedit used
  net/mlx5e: Update hw flows when encap source mac changed
  qed*: Advance drivers version to 8.37.0.20
  qed: Change verbosity for coalescing message.
  qede: Fix system crash on configuring channels.
  qed: Consider TX tcs while deriving the max num_queues for PF.
  ...

Right now ipvlan has a hard dependency on CONFIG_NETFILTER and
otherwise it cannot be built. However, the only ipvlan operation
mode that actually depends on netfilter is l3s, everything else
is independent of it. Break this hard dependency such that users
are able to use ipvlan l3 mode on systems where netfilter is not
compiled in.

Therefore, this adds a hidden CONFIG_IPVLAN_L3S bool which is
defaulting to y when CONFIG_NETFILTER is set in order to retain
existing behavior for l3s. All l3s related code is refactored
into ipvlan_l3s.c that is compiled in when enabled.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Martynas Pumputis <m@lambda.lt>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull char/misc fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.0-rc6.

  Nothing huge here, some more binderfs fixups found as people use it,
  and there is a "large" selftest added to validate the binderfs code,
  which makes up the majority of this pull request.

  There's also some small mei and mic fixes to resolve some reported
  issues.

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mic: vop: Fix crash on remove
  mic: vop: Fix use-after-free on remove
  binderfs: remove separate device_initcall()
  fpga: stratix10-soc: fix wrong of_node_put() in init function
  mic: vop: Fix broken virtqueues
  mei: free read cb on ctrl_wr list flush
  samples: mei: use /dev/mei0 instead of /dev/mei
  mei: me: add ice lake point device id.
  binderfs: respect limit on binder control creation
  binder: fix CONFIG_ANDROID_BINDER_DEVICES
  selftests: add binderfs selftests

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes for 5.0-rc6.

  Well, not so much "driver core" as "debugfs". There's a lot of
  outstanding debugfs cleanup patches coming in through different
  subsystem trees, and in that process the debugfs core was found that
  it really should return errors when something bad happens, to prevent
  random files from showing up in the root of debugfs afterward. So
  debugfs was fixed up to handle this properly, and then two fixes for
  the relay and blk-mq code was needed as it was making invalid
  assumptions about debugfs return values.

  There's also a cacheinfo fix in here that resolves a tiny issue.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  blk-mq: protect debugfs_create_files() from failures
  relay: check return of create_buf_file() properly
  debugfs: debugfs_lookup() should return NULL if not found
  debugfs: return error values, not NULL
  debugfs: fix debugfs_rename parameter checking
  cacheinfo: Keep the old value if of_property_read_u32 fails

Pull staging/IIO driver fixes from Greg KH:
 "Here are some small iio and staging driver fixes for 5.0-rc6.

  Nothing big, just resolve some reported IIO driver issues, and one
  staging driver bug. One staging driver patch was added and then
  reverted as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()"
  staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
  staging: octeon: fix broken phylib usage
  iio: ti-ads8688: Update buffer allocation for timestamps
  tools: iio: iio_generic_buffer: make num_loops signed
  iio: adc: axp288: Fix TS-pin handling
  iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial fixes for 5.0-rc6.

  Nothing huge, just a few small fixes for reported issues. The speakup
  fix is in here as it is a tty operation issue.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: fix race between flush_to_ldisc and tty_open
  staging: speakup: fix tty-operation NULL derefs
  serial: sh-sci: Do not free irqs that have already been freed
  serial: 8250_pci: Make PCI class test non fatal
  tty: serial: 8250_mtk: Fix potential NULL pointer dereference

Pull USB fixes from Grek KH:
 "Here are some small USB fixes for 5.0-rc6.

  Nothing huge, the normal amount of USB gadget fixes as well as some
  USB phy fixes. There's also a typec fix as well. Full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Correct the PPS out_volt calculation
  usb: gadget: musb: fix short isoc packets with inventra dma
  usb: phy: am335x: fix race condition in _probe
  usb: dwc3: exynos: Fix error handling of clk_prepare_enable
  usb: phy: fix link errors
  usb: gadget: udc: net2272: Fix bitwise and boolean operations
  usb: dwc3: gadget: Handle 0 xfer length for OUT EP

Pull xfs fixes from Darrick Wong:
 "Here are a handful of XFS fixes to fix a data corruption problem, a
  crasher bug, and a deadlock.

  Summary:

   - Fix cache coherency problem with writeback mappings

   - Fix buffer deadlock when shutting fs down

   - Fix a null pointer dereference when running online repair"

* tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: set buffer ops when repair probes for btree type
  xfs: end sync buffer I/O properly on shutdown error
  xfs: eof trim writeback mapping as soon as it is cached

Pull drm fixes from Dave Airlie:
 "Missed fixes last week as had nothing until amdgpu showed up on
  Saturday. Other stuff has since rolled in along with some more amdgpu
  fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i,
  rockchip and omap fixes.

  amdgpu/radeon:
   - fix crash on passthrough for SI
   - fencing fix for shared buffers
   - APU hwmon fix
   - API powerplay fix
   - eDP freesync fix
   - PASID mgr locking fix
   - KFD warning fix
   - DC/powerplay fix
   - raven revision ids fix
   - vega20 doorbell fix

  i915:
   - SNB display fix
   - SKL srckey mask fix
   - ICL DDI clock selection fix

  vmwgfx:
   - DMA API fix
   - IOMMU detection fix
   - display fixes

  sun4i:
   - tcon clock fix

  rockchip:
   - SPDX identifier fix

  omap:
   - DSI fixes"

* tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/omap: dsi: Hack-fix DSI bus flags
  drm/omap: dsi: Fix OF platform depopulate
  drm/omap: dsi: Fix crash in DSI debug dumps
  drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen
  drm/amd/display: Attach VRR properties for eDP connectors
  drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu
  drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr
  drm/i915: always return something on DDI clock selection
  drm/i915: Fix skl srckey mask bits
  drm/vmwgfx: Improve on IOMMU detection
  drm/vmwgfx: Fix setting of dma masks
  drm/vmwgfx: Also check for crtc status while checking for DU active
  drm/vmwgfx: Fix an uninitialized fence handle value
  drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user
  drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init
  drm/amdgpu: fix the incorrect external id for raven series
  drm/amdgpu: Implement doorbell self-ring for NBIO 7.4
  drm/amd/display: Fix fclk idle state
  drm/amdgpu: Transfer fences to dmabuf importer
  drm/amd/powerplay: Fix missing break in switch
  ...

Fixes the issues with non BCM58XX chips in the b53 driver
failing, when the irq is not specified in the device tree.

Removed the check for BCM58XX in b53_srab_prepare_irq(),
so the 'port->irq' will be set to '-EXIO' if the irq is not
specified in the device tree.

Fixes: 16994374 ("net: dsa: b53: Make SRAB driver manage port interrupts")
Fixes: b2ddc48a ("net: dsa: b53: Do not fail when IRQ are not initialized")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let genphy_c45_read_link manage the devices to check, this removes
overhead from callers. Add C22EXT to the list of excluded devices
because it doesn't implement the status register. According to the
802.3 clause 45 spec registers 29.0 - 29.4 are reserved.

At the moment we have very few clause 45 PHY drivers, so we are
lacking experience whether other drivers will have to exclude further
devices, or may need to check PHY XS. If we should figure out that
list of devices to check needs to be configurable, I think best will
be to add a device list member to struct phy_driver.

v2:
- adjusted commit message
- exclude also device C22EXT from link checking
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add fixed_phy_register_with_gpiod() API. It lets users create a
fixed_phy instance that uses a GPIO descriptor which was obtained
externally e.g. through platform data.
This enables platform devices (non-DT based) to use GPIOs for link
status.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
Add comphy support for Armada 38x

This series adds support for the comphy for Armada 38x, which allows
these SoCs to use 2500BASE-X mode with appropriate SFP modules.

Tested on SolidRun Clearfog after updating for the 5.0 merge window
changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the comphy settings for the Ethernet interfaces.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the common phy binding, so that we can reconfigure the
comphy according to the desired ethernet speed.  This will allow us to
support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an optional phys property to the mvneta binding documentation for
the common phy.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the DT description for the Armada 38x common phy.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the Armada 38x common phy to allow us to change the
speed of the Ethernet serdes lane.  This driver only supports
manipulation of the speed, it does not support configuration of the
common phy.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>