- 25 Nov, 2017 3 commits
-
-
Emmanuel Grumbach authored
When we are in a search cycle, we try different combinations of parameters. Those combinations are called 'columns'. When we switch to a new column, we first need to check if this column has a suitable rate, if not, we can't try it. This means we must not erase the statistics we gathered for the previous column until we are sure that we are indeed switching column. The code that tries to switch to a new column first sets a whole bunch of things for the new column, and only then checks that we can find suitable rates in that column. While doing that, the code mistakenly erased the rate statistics. This code was right until struct iwl_scale_tbl_info grew up for TPC. Fix this to make sure we don't erase the rate statistics until we are sure that we can indeed switch to the new column. Note that this bug is really harmless since it causes a change in the behavior only when we can't find any rate in the new column which should really not happen. In the case we do find a suitable we reset the rate statistics a few lines later anyway. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
In A000 family, compressed BA notifs can include MGMT frames, so don't fail RXs in such a case. While at it, since in A000 the TID for MGMT frames is 15, treat it in the RX flow as if received TID 8. This way we won't require special handling of this TID. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Sara Sharon authored
This bit will be used in CCK to indicate short preamble. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
- 11 Nov, 2017 1 commit
-
-
Chung-Hsien Hsu authored
The firmware for brcmfmac devices includes information regarding regulatory constraints. For certain devices this information is kept separately in a binary form that needs to be downloaded to the device. This patch adds support to download this so-called CLM blob file. It uses the same naming scheme as the other firmware files with extension of .clm_blob. The CLM blob file is optional. If the file does not exist, the download process will be bypassed. It will not affect the driver loading. Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 10 Nov, 2017 19 commits
-
-
Gustavo A. R. Silva authored
"INVALID_STATE" is already being returned in the default case and this code cannot be reached. Addresses-Coverity-ID: 1398384 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Arnd Bergmann authored
rt2x00 uses the deprecated do_gettimeofday() function to get a timestamp for its debugfs "dump" file interface. The timestamp is using an unsigned 32-bit value, so we could make it work until 2106 by using ktime_get_real_ts64(), but it seems better to use monotonic times, as we normally want for timestamps. Since this is an interface change, I'm incrementing the DUMP_HEADER_VERSION number, so user space can figure out whether the timestamps are monotonic or not. Most likely the tools won't care either way. Generally speaking, ABI version numbers and in particular changing them is a bad idea. However since this is in debugfs, we don't put any API stability rules on the interface according to Documentation/filesystems/debugfs.txt, and we can take the easy way out here; anyone using the frame dump feature can probably work out the differences here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stanislaw Gruszka authored
ENOENT usb error mean "specified interface or endpoint does not exist or is not enabled". Mark device not present when we encounter this error similar like we do with ENODEV error. Otherwise we can have infinite loop in rt2x00usb_work_rxdone(), because we remove and put again RX entries to the queue infinitely. We can have similar situation when submit urb will fail all the time with other error, so we need consider to limit number of entries processed by rxdone work. But for now, since the patch fixes reproducible soft lockup issue on single processor systems and taken ENOENT error meaning, let apply this fix. Patch adds additional ENOENT check not only in rx kick routine, but also on other places where we check for ENODEV error. Reported-by:
Richard Genoud <richard.genoud@gmail.com> Debugged-by:
Stanislaw Gruszka <sgruszka@redhat.com> Tested-by:
-
Igor Mitsyanko authored
Specifically, following parameters are needed for wireless device configuration but were not available to it before: - HT/VHT capabilities and capabilities masks. - full channel info (not just IEEE number) - BSSID hint - previous BSSID for reassoc request Move Management Frame Protection setting from common encr info structure into STA-specific .connect command parameters. Make sure that all new qlink structure definitions are alignment-safe. Signed-off-by:
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Reviewed-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Igor Mitsyanko authored
Include HT/VHT caps directly into command so that they won't have to be searched for in IEs. Signed-off-by:
-
Igor Mitsyanko authored
Current logic artificially divides "start AP" procedure into three stages: - generic interface configuration (security, channel etc) - IE's processing - enable AP mode on interface This separation would not allow to do a proper device configuration as first stage needs to use information from IEs that are processed on a second stage. Which means first and second stages have to be meged. In that case there is no point anymore to keep third stage either, so merge all three into a single command. This new command carries all the same info as contained in "struct cfg80211_ap_settings". Signed-off-by:
-
Igor Mitsyanko authored
Data contained within "Append IEs" command (QLINK_CMD_MGMT_SET_APPIE) duplicates QTN_TLV_ID_IE_SET TLV. Convert the command to use that TLV instead. Signed-off-by:
-
Igor Mitsyanko authored
"IE set" TLV carries the same information as qlink_event_scan_result::frame_type. Convert the event to make use of TLV and drop frame_type member. While at it, make qlink_event_scan_result structure alignement-safe. Signed-off-by:
-
Igor Mitsyanko authored
Specifying frame type for "IE set" TLV will allow to use several TLVs in a single message. Modify users accordingly. Signed-off-by:
-
Igor Mitsyanko authored
Supported WiFi operation modes are now identified per-band based on HT/VHT capabilities of each band. Signed-off-by:
-
Igor Mitsyanko authored
Information on which HT/VHT capabilities can be overridden is reported per-MAC by wireless device. Signed-off-by:
-
Igor Mitsyanko authored
HT/VHT capabilities must be reported per each band supported by a radio, not for all bands on a radio. Furthermore, driver better not assume any capabilities and just use whetever is reported by device itself. To support this, convert "get channels" command into "get band info" command. Difference is that it may also carry HT/VHT capabilities along with channels information. While at it, also add "num_bitrates" field to "get band info" command, for future use. Signed-off-by:
-
Arend Van Spriel authored
The configuration of the IEs for probe requests was done in a P2P related function, which is not very obvious. Moving it to .scan callback function, ie. brcmf_cfg80211_scan(). Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
-
Arend Van Spriel authored
The field struct brcmf_cfg80211_info::active_scan is set to true upon initializing the driver instance, but it is never changed so simply get rid of it. Reviewed-by:
-
Arend Van Spriel authored
The function brcmf_cfg80211_escan() is only called by brcmf_cfg80211_scan() so there is no reason to split in two function especially since the latter does not do an awful lot. Reviewed-by:
-
Arend Van Spriel authored
Minor cleanup using provided macro to convert milliseconds interval to jiffies in brcmf_cfg80211_escan(). Reviewed-by:
-
Arend Van Spriel authored
The function brcmf_cfg80211_escan() was always called with a non-null request parameter and null pointer for this_ssid parameter. Clean up the function removing the dead code path. Reviewed-by:
-
Franky Lin authored
Disable arp and nd offload to allow all packets sending to host. Reported-by:
Phil Elwell <phil@raspberrypi.org> Tested-by:
-
Arend Van Spriel authored
The firmware uses a mailbox to communicate to the host what is going on. In the driver we validate the bit received. Various people seen the following message: brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content: 0x40012 Bit 4 is cause of this message, but this actually indicates the firmware has halted. Handle this bit by giving a more meaningful error message. Reviewed-by:
-
- 08 Nov, 2017 15 commits
-
-
Colin Ian King authored
Variable framelen is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/zydas/zd1201.c:234:3: warning: Value stored to 'framelen' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The pointer dev is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/intersil/orinoco/orinoco_usb.c:1468:2: warning: Value stored to 'dev' is never read Signed-off-by:
-
Colin Ian King authored
Pointer sta_priv is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/intel/iwlegacy/4965-rs.c:2163:2: warning: Value stored to 'sta_priv' is never read Signed-off-by:
-
Colin Ian King authored
cfg_cmd is initialized to zero and this value is never read, instead it is over-written in the start of a do-while loop. Remove the redundant initialization. Cleans up clang warning: drivers/net/wireless/realtek/rtlwifi/core.c:1750:22: warning: Value stored to 'cfg_cmd' during its initialization is never read Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Colin Ian King authored
tid_data is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/realtek/rtlwifi/base.c:1581:2: warning: Value stored to 'tid_data' is never read Signed-off-by:
-
Arnd Bergmann authored
The calculation of ppsc->last_wakeup_time is not y2038-safe, but the variable is not used at all, so we can simply drop it. Signed-off-by:
-
Arnd Bergmann authored
do_gettimeofday() is deprecated and slower than necessary for the purpose of reading the seconds. This changes rtl_op_suspend/resume to use ktime_get_real_seconds() instead, which is simpler and avoids confusion about whether it is y2038-safe or not. Signed-off-by:
-
Arnd Bergmann authored
We set rtlhal->last_suspend_sec to an uninitialized stack variable, but unfortunately gcc never warned about this, I only found it while working on another patch. I opened a gcc bug for this. Presumably the value of rtlhal->last_suspend_sec is not all that important, but it does get used, so we probably want the patch backported to stable kernels. Cc: stable@vger.kernel.org Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82839Signed-off-by:
-
Ping-Ke Shih authored
8822be checks H2CQ by int_d, so we extend to four ISR. Also, irq_mask is extended to four. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
When the driver for the RTL8822BE is added, it will need an ID for further use. Signed-off-by:
-
Ping-Ke Shih authored
With the RTL8822BE, an H2C tx queue is added to download FW and special data. This change implements the support code in rtl_pci. Signed-off-by:
-
Ping-Ke Shih authored
The number of TX/RX BD desc for 8822BE is 512. The TX/RX BD architecture of 8822BE is the same as 8192EE. Signed-off-by:
-
Larry Finger authored
In several places, the code assigns a variable inside an "if" or "case" block, but uses it only once. The code is simplified by eliminating the extraneous variable. With this change, one level of indenting is saved. This patch does not cause any functional changes in the binary code. Signed-off-by:
-
Larry Finger authored
Checkpatch.pl reports a number of formatting problems in this source file. None of the changes cause any functional changes in the driver. Signed-off-by:
-
Larry Finger authored
Checkpatch.pl reports a number of formatting problems in this header file. None of the changes cause any functional changes in the driver. Signed-off-by:
-
- 06 Nov, 2017 1 commit
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi updates * Some new PCI IDs; * A bunch of cleanups; * The timers update by Kees; * Add more register dump call-sites; * A fix for a locking issue in the TX flush code; * Actual implementation of the TX flush code for A000; * An optimization to drop RX frames during restart to avoid BA issues;
-
- 05 Nov, 2017 1 commit
-
-
David S. Miller authored
Roman Gushchin says: ==================== eBPF-based device cgroup controller This patchset introduces an eBPF-based device controller for cgroup v2. Patches (1) and (2) are a preparational work required to share some code with the existing device controller implementation. Patch (3) is the main patch, which introduces a new bpf prog type and all necessary infrastructure. Patch (4) moves cgroup_helpers.c/h to use them by patch (4). Patch (5) implements an example of eBPF program which controls access to device files and corresponding userspace test. v3: Renamed constants introduced by patch (3) to BPF_DEVCG_* v2: Added patch (1). v1: https://lkml.org/lkml/2017/11/1/363 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
