- 05 Jul, 2010 40 commits
-
-
Daniel T Chen authored
commit 9f75c1b1 upstream. BugLink: https://launchpad.net/bugs/587546 Symptom: On the reporter's ASUS M2V, using PulseAudio in Ubuntu 10.04 LTS results in the PA daemon crashing shortly after attempting playback of an audio file. Test case: Using Ubuntu 10.04 LTS (Linux 2.6.32.12), Linux 2.6.33, or Linux 2.6.34, attempt playback of an audio file while PulseAudio is active. Resolution: add SSID for this machine to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: D Tangman Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel T Chen authored
commit b90c0764 upstream. BugLink: https://launchpad.net/bugs/580749 Symptom: on the original reporter's VIA VT1708-based board, the PulseAudio daemon dies shortly after the user attempts to play an audio file. Test case: boot from Ubuntu 10.04 LTS live cd; attempt to play an audio file. Resolution: add SSID for the original reporter's hardware to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: Harald Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel T Chen authored
commit 26fd74fc upstream. BugLink: https://launchpad.net/bugs/542550 Symptom: On the reporter's iMac, in Ubuntu 10.04 LTS neither playback nor capture appear audible out-of-the-box. Test case: Boot from an Ubuntu 10.04 LTS live cd or from an installed configuration and attempt to play or capture audio. Resolution: Specify the mb31 quirk for this machine in the codec SSID table. Reported-and-Tested-By: f3a97 Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel T Chen authored
commit dd37f8e8 upstream. BugLink: https://launchpad.net/bugs/465942 Symptom: On the reporter's ASUS device, using PulseAudio in Ubuntu 10.04 LTS results in the PA daemon crashing shortly after attempting to select capture or to configure the audio hardware profile. Test case: Using Ubuntu 10.04 LTS (Linux 2.6.32.12), Linux 2.6.33, or Linux 2.6.34, adjust the HDA device's capture volume with PulseAudio. Resolution: add SSID for this machine to the position_fix quirk table, explicitly specifying the LPIB method. Reported-and-Tested-By: Irihapeti Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ian Campbell authored
commit b3831cb5 upstream. Since the device we are resuming could be the device containing the swap device we should ensure that the allocation cannot cause IO. On resume, this path is triggered when the running system tries to continue using its devices. If it cannot then the resume will fail; to try to avoid this we let it dip into the emergency pools. The majority of these changes were made when linux-2.6.18-xen.hg changeset e8b49cfbdac0 was ported upstream in a144ff09 but somehow this hunk was dropped. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ian Campbell authored
commit cd52e17e upstream. The core suspend/resume code is run from stop_machine on CPU0 but parts of the suspend/resume machinery (including xen_arch_resume) are run on whichever CPU happened to schedule the xenwatch kernel thread. As part of the non-core resume code xen_arch_resume is called in order to restart the timer tick on non-boot processors. The boot processor itself is taken care of by core timekeeping code. xen_arch_resume uses smp_call_function which does not call the given function on the current processor. This means that we can end up with one CPU not receiving timer ticks if the xenwatch thread happened to be scheduled on CPU > 0. Use on_each_cpu instead of smp_call_function to ensure the timer tick is resumed everywhere. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Gabor Gombas authored
commit 3d6e77a3 upstream. The low-memory corruption checker triggers during suspend/resume, so we need to reserve the low 64k. Don't be fooled that the BIOS identifies itself as "Dell Inc.", it's still Phoenix BIOS. [ hpa: I think we blacklist almost every BIOS in existence. We should either change this to a whitelist or just make it unconditional. ] Signed-off-by: Gabor Gombas <gombasg@digikabel.hu> LKML-Reference: <201005241913.o4OJDIMM010877@imap1.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Kosina authored
commit a747c5ab upstream. If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Moyer authored
commit 91803b49 upstream. I/O errors can happen due to temporary failures, like multipath errors or losing network contact with the iSCSI server. Because of that, the VM will retry readpage on the page. However, do_generic_file_read does not clear PG_error. This causes the system to be unable to actually use the data in the page cache page, even if the subsequent readpage completes successfully! The function filemap_fault has had a ClearPageError before readpage forever. This patch simply adds the same to do_generic_file_read. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Heiko Carstens authored
commit 7cbe1770 upstream. A call to access_ok is missing a compat_ptr conversion. Introduced with b8373363 "compat: factor out compat_rw_copy_check_uvector from compat_do_readv_writev" fs/compat.c: In function 'compat_rw_copy_check_uvector': fs/compat.c:629: warning: passing argument 1 of '__access_ok' makes pointer from integer without a cast Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Moyer authored
commit b8373363 upstream. It was reported in http://lkml.org/lkml/2010/3/8/309 that 32 bit readv and writev AIO operations were not functioning properly. It turns out that the code to convert the 32bit io vectors to 64 bits was never written. The results of that can be pretty bad, but in my testing, it mostly ended up in generating EFAULT as we walked off the list of I/O vectors provided. This patch set fixes the problem in my environment. are greatly appreciated. This patch: Factor out code that will be used by both compat_do_readv_writev and the compat aio submission code paths. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oleg Nesterov authored
commit 065add39 upstream. Andrew Tridgell reports that aio_read(SIGEV_SIGNAL) can fail if the notification from the helper thread races with setresuid(), see http://samba.org/~tridge/junkcode/aio_uid.c This happens because check_kill_permission() doesn't permit sending a signal to the task with the different cred->xids. But there is not any security reason to check ->cred's when the task sends a signal (private or group-wide) to its sub-thread. Whatever we do, any thread can bypass all security checks and send SIGKILL to all threads, or it can block a signal SIG and do kill(gettid(), SIG) to deliver this signal to another sub-thread. Not to mention that CLONE_THREAD implies CLONE_VM. Change check_kill_permission() to avoid the credentials check when the sender and the target are from the same thread group. Also, move "cred = current_cred()" down to avoid calling get_current() twice. Note: David Howells pointed out we could relax this even more, the CLONE_SIGHAND (without CLONE_THREAD) case probably does not need these checks too. Roland said: : The glibc (libpthread) that does set*id across threads has : been in use for a while (2.3.4?), probably in distro's using kernels as old : or older than any active -stable streams. In the race in question, this : kernel bug is breaking valid POSIX application expectations. Reported-by: Andrew Tridgell <tridge@samba.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ira W. Snyder authored
commit df16dd53 upstream. Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alexander Duyck authored
commit 73367bd8 upstream. This patch is meant to improve the performance of SLUB by moving the local kmem_cache_node lock into it's own cacheline separate from kmem_cache. This is accomplished by simply removing the local_node when NUMA is enabled. On my system with 2 nodes I saw around a 5% performance increase w/ hackbench times dropping from 6.2 seconds to 5.9 seconds on average. I suspect the performance gain would increase as the number of nodes increases, but I do not have the data to currently back that up. Bugzilla-Reference: http://bugzilla.kernel.org/show_bug.cgi?id=15713Reported-by: Alex Shi <alex.shi@intel.com> Tested-by: Alex Shi <alex.shi@intel.com> Acked-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Christoph Lameter authored
commit 0f1f6942 upstream. Commit 756dee75 ("SLUB: Get rid of dynamic DMA kmalloc cache allocation") makes S390 run out of kmalloc caches. Increase the number of kmalloc caches to a safe size. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dave Airlie authored
commit cf22f20a upstream. airlied -> brown paper bag. I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some brackets instead of breaking everything in site. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mark Brown authored
commit f68596c6 upstream. These should be regular, not linear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mark Brown authored
commit 3351e9fb upstream. These scales should be regular, not linear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mark Brown authored
commit e6a08c5a upstream. These should be regular rather than linear scales. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Stuart Longland authored
commit e2b3e622 upstream. This updates the i.MX SSI driver to make it compatible with the ASoC tree following the move of DMA parameters from the DAI to the audio substream object. Signed-off-by: Stuart Longland <redhatter@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Imre Deak authored
commit 2dcb22b3 upstream. Currently idr_remove_all will fail with a use after free error if idr::layers is bigger than 2, which on 32 bit systems corresponds to items more than 1024. This is due to stepping back too many levels during backtracking. For simplicity let's assume that IDR_BITS=1 -> we have 2 nodes at each level below the root node and each leaf node stores two IDs. (In reality for 32 bit systems IDR_BITS=5, with 32 nodes at each sub-root level and 32 IDs in each leaf node). The sequence of freeing the nodes at the moment is as follows: layer 1 -> a(7) 2 -> b(3) c(5) 3 -> d(1) e(2) f(4) g(6) Until step 4 things go fine, but then node c is freed, whereas node g should be freed first. Since node c contains the pointer to node g we'll have a use after free error at step 6. How many levels we step back after visiting the leaf nodes is currently determined by the msb of the id we are currently visiting: Step 1. node d with IDs 0,1 is freed, current ID is advanced to 2. msb of the current ID bit 1. This means we need to step back 1 level to node b and take the next sibling, node e. 2-3. node e with IDs 2,3 is freed, current ID is 4, msb is bit 2. This means we need to step back 2 levels to node a, freeing node b on the way. 4-5. node f with IDs 4,5 is freed, current ID is 6, msb is still bit 2. This means we again need to step back 2 levels to node a and free c on the way. 6. We should visit node g, but its pointer is not available as node c was freed. The fix changes how we determine the number of levels to step back. Instead of deducting this merely from the msb of the current ID, we should really check if advancing the ID causes an overflow to a bit position corresponding to a given layer. In the above example overflow from bit 0 to bit 1 should mean stepping back 1 level. Overflow from bit 1 to bit 2 should mean stepping back 2 levels and so on. The fix was tested with IDs up to 1 << 20, which corresponds to 4 layers on 32 bit systems. Signed-off-by: Imre Deak <imre.deak@nokia.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Moyer authored
commit 9d85cba7 upstream. The aio compat code was not converting the struct iovecs from 32bit to 64bit pointers, causing either EINVAL to be returned from io_getevents, or EFAULT as the result of the I/O. This patch passes a compat flag to io_submit to signal that pointer conversion is necessary for a given iocb array. A variant of this was tested by Michael Tokarev. I have also updated the libaio test harness to exercise this code path with good success. Further, I grabbed a copy of ltp and ran the testcases/kernel/syscall/readv and writev tests there (compiled with -m32 on my 64bit system). All seems happy, but extra eyes on this would be welcome. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_COMPAT=n build] Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Russell King authored
commit 138de1c4 upstream. vfp_put_double() takes the double value in r0,r1 not r1,r2. Reported-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Linus Walleij authored
commit ea208f64 upstream. This fixes a bug in mm/init.c when freeing the TCM compile memory, this was being referred to as a char * which is incorrect: this will dereference the pointer and feed in the value at the location instead of the address to it. Change it to a plain char and use &(char) to reference it. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marek Vašut authored
commit 3defb247 upstream. This patch reorganises the sa1111_resume() function in a manner the spinlock happens after calling the sa1111_wake(). This fixes two bugs: 1) This function called sa1111_wake() which tried to claim the same spinlock the sa1111_resume() already claimed. This would result in certain deadlock. Original idea for this part: Russell King <rmk+kernel@arm.linux.org.uk> 2) The function didn't unlock the spinlock in case the chip didn't report correct ID. Original idea for this part: Julia Lawall <julia@diku.dk> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Khem Raj authored
commit 9a40ac86 upstream. When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Anfei authored
commit 5e27fb78 upstream. Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. Signed-off-by: Anfei Zhou <anfei.zhou@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Santosh Shilimkar authored
commit a901ff71 upstream. This patch fixes the flush_cache_all for ARMv7 SMP.It was missing from commit b8349b56Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastien Dugue authored
commit c0dc72ba upstream. If the number of sg entries in the ICM chunk reaches MLX4_ICM_CHUNK_LEN, we must set chunk to NULL even for coherent mappings so that the next time through the loop will allocate another chunk. Otherwise we'll overflow the sg list the next time through the loop. This will lead to memory corruption if this case is hit. mthca does not have this bug. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
NeilBrown authored
commit a64c876f upstream. Some levels expect the 'redundancy group' to be present, others don't. So when we change level of an array we might need to add or remove this group. This requires fixing up the current practice of overloading ->private to indicate (when ->pers == NULL) that something needs to be removed. So create a new ->to_remove to fill that role. When changing levels, we may need to add or remove attributes. When changing RAID5 -> RAID6, we both add and remove the same thing. It is important to catch this and optimise it out as the removal is delayed until a lock is released, so trying to add immediately would cause problems. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
KOSAKI Motohiro authored
commit e9d6c157 upstream. Shaohua Li reported parallel file copy on tmpfs can lead to OOM killer. This is regression of caused by commit 9ff473b9 ("vmscan: evict streaming IO first"). Wow, It is 2 years old patch! Currently, tmpfs file cache is inserted active list at first. This means that the insertion doesn't only increase numbers of pages in anon LRU, but it also reduces anon scanning ratio. Therefore, vmscan will get totally confused. It scans almost only file LRU even though the system has plenty unused tmpfs pages. Historically, lru_cache_add_active_anon() was used for two reasons. 1) Intend to priotize shmem page rather than regular file cache. 2) Intend to avoid reclaim priority inversion of used once pages. But we've lost both motivation because (1) Now we have separate anon and file LRU list. then, to insert active list doesn't help such priotize. (2) In past, one pte access bit will cause page activation. then to insert inactive list with pte access bit mean higher priority than to insert active list. Its priority inversion may lead to uninteded lru chun. but it was already solved by commit 64574746 (vmscan: detect mapped file pages used only once). (Thanks Hannes, you are great!) Thus, now we can use lru_cache_add_anon() instead. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
FUJITA Tomonori authored
commit 76b99699 upstream. Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
FUJITA Tomonori authored
commit 498900fc upstream. Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
FUJITA Tomonori authored
commit 69dcf3db upstream. Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maurus Cuelenaere authored
commit e893de59 upstream. s3c_rtc_setfreq() uses the platform driver data to derive struct rtc_device, so make sure drvdata is set _before_ s3c_rtc_setfreq() is called. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
commit 6ba8bcd4 upstream. The bug is an oops when dev_get_drvdata() returned null in cmos_update_irq_enable(). The call tree looks like this: rtc_dev_ioctl() => rtc_update_irq_enable() => cmos_update_irq_enable() It's caused by a race condition in the module initialization. It is rtc_device_register() which makes the ioctl operations live so I moved the call to dev_set_drvdata() before the call to rtc_device_register(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15963Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Malte Schroder <maltesch@gmx.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
FUJITA Tomonori authored
commit dd6c26a6 upstream. Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Ungerer authored
commit e9a137cb upstream. Commit 8b505ca8 ("serial: 68328serial.c: remove BAUD_TABLE_SIZE macro") misses one use of BAUD_TABLE_SIZE. So the resulting 68328serial.c does not compile: drivers/serial/68328serial.c: In function `m68328_console_setup': drivers/serial/68328serial.c:1439: error: `BAUD_TABLE_SIZE' undeclared (first use in this function) drivers/serial/68328serial.c:1439: error: (Each undeclared identifier is reported only once drivers/serial/68328serial.c:1439: error: for each function it appears in.) Fix that last use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
FUJITA Tomonori authored
commit 6cdafaae upstream. Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
commit ddf08f4b upstream. For kmap_atomic() we call kunmap_atomic() on the returned pointer. That's different from kmap() and kunmap() and so it's easy to get them backwards. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-