'static const int const' means the same thing as 'static const int'
and sparse complains about this.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Since some regulators in the system may not support suspend mode
configuration we need to allow some regulators to have a missing
suspend mode configuration. Do this by requiring that disabled
regulators are explicitly flagged and then skip over regulators
that have no state specified.

Try to avoid surprises by warning the if we could set the state
but no configuration is provided.  This also ensures that an all
zeros configuration generates a warning rather than silently
disabling the regulator.
Reported-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Some of the regulator API functions have code to allow the machine
constraints to override the device supplied name for the regulator
in the constraints in order to help tie logging to supplies on the
board and disambiguate when there is more than one regulator chip
in the system. Factor this code out into a new rdev_get_name()
function and use it throughout the regulator API so that we always
use the same name.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

When voltage or current constraints are either missing or specify
a range display the actual setting along with the constraints if
we can. This can aid debugging of configuration problems.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

It makes sense to do all the voltage configuration in the one split
out function.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

This allows constraints to take effect on regulators that support
voltage setting but for which the board does not specify a voltage
range (for example, because it is fixed correctly at system startup).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

If we're going to log an error we may as well log what the error
code that we're failing on is.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Hi Liam,

Since Samuel merged a new version of mfd 88pm8607 driver, I format a
new patch on regulator 88pm8607. I paste the new patch in mail. Please
help to review again. And I also attach the mfd driver in mail.

From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Thu, 8 Oct 2009 09:36:53 -0400
Subject: [PATCH] regulator: Add 88PM8607 PMIC driver

This patch adds regulator drivers for Marvell 88PM8607 PMIC.
This controller contains 3 DVC and 14 LDO regulators. This controller
uses I2C interface.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

The BuckWise DC-DC convertors in WM831x devices support switching to
a second output voltage using the logic level on one of the device
pins. This is intended to allow rapid voltage switching for uses like
cpufreq, replacing the I2C or SPI write used to configure the voltage
of the regulator with a much faster GPIO status change.

This is implemented by keeping the DVS voltage configured as the
maximum voltage permitted for the regulator. If a request is made
for the maximum voltage then the GPIO is used to switch to the DVS
voltage, otherwise the normal ON voltage is updated and used. This
follows the idiom used by most cpufreq drivers, which drop the
minimum voltage as the core frequency is dropped but use a constant
maximum - raising the voltage should normally be fast, but lowering
it may be slower.

Configuration of the DVS MFP on the device should be done externally,
for example via OTP.

Support is present in the hardware for monitoring the status of the
transition using a second GPIO. This is not currently implemented
but platform data is provided for it - the driver currently assumes
that the device will be configured to transition immediately - but
platform data is provided to reduce merge issues once it is.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Tested with a MX25-based custom board.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Replacing
	error = 0;
	if (error)
		op
with nothing is not quite an equivalent transformation ;-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  XFS: Free buffer pages array unconditionally
  xfs: kill xfs_bmbt_rec_32/64 types
  xfs: improve metadata I/O merging in the elevator
  xfs: check for not fully initialized inodes in xfs_ireclaim

Commit 3d1e4631 ("get rid of init_file()") removed the export of
alloc_file() -- possibly inadvertently, since that commit mainly
consisted of deleting the lines between the end of alloc_file() and
the start of the code in init_file().

There is in fact one modular use of alloc_file() in the tree, in
drivers/infiniband/core/uverbs_main.c, so re-add the export to fix:

    ERROR: "alloc_file" [drivers/infiniband/core/ib_uverbs.ko] undefined!

when CONFIG_INFINIBAND_USER_ACCESS=m.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  powerpc: fix up for mmu_mapin_ram api change
  powerpc: wii: allow ioremap within the memory hole
  powerpc: allow ioremap within reserved memory regions
  wii: use both mem1 and mem2 as ram
  wii: bootwrapper: add fixup to calc useable mem2
  powerpc: gamecube/wii: early debugging using usbgecko
  powerpc: reserve fixmap entries for early debug
  powerpc: wii: default config
  powerpc: wii: platform support
  powerpc: wii: hollywood interrupt controller support
  powerpc: broadway processor support
  powerpc: wii: bootwrapper bits
  powerpc: wii: device tree
  powerpc: gamecube: default config
  powerpc: gamecube: platform support
  powerpc: gamecube/wii: flipper interrupt controller support
  powerpc: gamecube/wii: udbg support for usbgecko
  powerpc: gamecube/wii: do not include PCI support
  powerpc: gamecube/wii: declare as non-coherent platforms
  powerpc: gamecube/wii: introduce GAMECUBE_COMMON
  ...

Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.

Hopefully even close to correctly.

* 'drm-vmware-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/vmwgfx: Add DRM driver for VMware Virtual GPU
  drm/vmwgfx: Add svga headers for vmwgfx driver
  drm/ttm: Add more driver type enums

* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (34 commits)
  HWPOISON: Remove stray phrase in a comment
  HWPOISON: Try to allocate migration page on the same node
  HWPOISON: Don't do early filtering if filter is disabled
  HWPOISON: Add a madvise() injector for soft page offlining
  HWPOISON: Add soft page offline support
  HWPOISON: Undefine short-hand macros after use to avoid namespace conflict
  HWPOISON: Use new shake_page in memory_failure
  HWPOISON: Use correct name for MADV_HWPOISON in documentation
  HWPOISON: mention HWPoison in Kconfig entry
  HWPOISON: Use get_user_page_fast in hwpoison madvise
  HWPOISON: add an interface to switch off/on all the page filters
  HWPOISON: add memory cgroup filter
  memcg: add accessor to mem_cgroup.css
  memcg: rename and export try_get_mem_cgroup_from_page()
  HWPOISON: add page flags filter
  mm: export stable page flags
  HWPOISON: limit hwpoison injector to known page types
  HWPOISON: add fs/device filters
  HWPOISON: return 0 to indicate success reliably
  HWPOISON: make semantics of IGNORED/DELAYED clear
  ...

As predicted during code review, the sysctl(2) changes made systems with
old glibc nearly unusable.  About every command gives a:

  warning: process `ls' used the deprecated sysctl system call with 1.4

warning in the log.

I see this on a SUSE 10.0 system with glibc 2.3.5.

Don't warn for this common case.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (117 commits)
  ACPI processor: Fix section mismatch for processor_add()
  ACPI: Add platform-wide _OSC support.
  ACPI: cleanup pci_root _OSC code.
  ACPI: Add a generic API for _OSC -v2
  msi-wmi: depend on backlight and fix corner-cases problems
  msi-wmi: switch to using input sparse keymap library
  msi-wmi: replace one-condition switch-case with if statement
  msi-wmi: remove unused field 'instance' in key_entry structure
  msi-wmi: remove custom runtime debug implementation
  msi-wmi: rework init
  msi-wmi: remove useless includes
  X86 drivers: Introduce msi-wmi driver
  Toshiba Bluetooth Enabling driver (RFKill handler v3)
  ACPI: fix for lapic_timer_propagate_broadcast()
  acpi_pad: squish warning
  ACPI: dock: minor whitespace and style cleanups
  ACPI: dock: add struct dock_station * directly to platform device data
  ACPI: dock: dock_add - hoist up platform_device_register_simple()
  ACPI: dock: remove global 'dock_device_name'
  ACPI: dock: combine add|alloc_dock_dependent_device (v2)
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits)
  perf record: Use per-task-per-cpu events for inherited events
  perf record: Properly synchronize child creation
  perf events: Allow per-task-per-cpu counters
  perf diff: Percent calcs should use double values
  perf diff: Change the default sort order to "dso,symbol"
  perf diff: Use perf_session__fprintf_hists just like 'perf record'
  perf report: Fix cut'n'paste error recently introduced
  perf session: Move perf report specific hits out of perf_session__fprintf_hists
  perf tools: Move hist entries printing routines from perf report
  perf report: Generalize perf_session__fprintf_hists()
  perf symbols: Move symbol filtering to event__preprocess_sample()
  perf symbols: Adopt the strlists for dso, comm
  perf symbols: Make symbol_conf global
  perf probe: Fix to show which probe point is not found
  perf probe: Check symbols in symtab/kallsyms
  perf probe: Check build-id of vmlinux
  perf probe: Reject second attempt of adding same-name event
  perf probe: Support event name for --add option
  perf probe: Add glob matching support on --del
  perf probe: Use strlist__for_each macros in probe-event.c
  ...

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits)
  direct I/O fallback sync simplification
  ocfs: stop using do_sync_mapping_range
  cleanup blockdev_direct_IO locking
  make generic_acl slightly more generic
  sanitize xattr handler prototypes
  libfs: move EXPORT_SYMBOL for d_alloc_name
  vfs: force reval of target when following LAST_BIND symlinks (try #7)
  ima: limit imbalance msg
  Untangling ima mess, part 3: kill dead code in ima
  Untangling ima mess, part 2: deal with counters
  Untangling ima mess, part 1: alloc_file()
  O_TRUNC open shouldn't fail after file truncation
  ima: call ima_inode_free ima_inode_free
  IMA: clean up the IMA counts updating code
  ima: only insert at inode creation time
  ima: valid return code from ima_inode_alloc
  fs: move get_empty_filp() deffinition to internal.h
  Sanitize exec_permission_lite()
  Kill cached_lookup() and real_lookup()
  Kill path_lookup_open()
  ...

Trivial conflicts in fs/direct-io.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: rwsem.h need not be included into main.c
  PM: Remove unnecessary goto from device_resume_noirq()
  PM: Add initcall_debug style timing for suspend/resume
  PM: allow for usage_count > 0 in pm_runtime_get()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix kprobes build with non-gawk awk
  x86: Split swiotlb initialization into two stages
  x86: Regex support and known-movable symbols for relocs, fix _end
  x86, msr: Remove incorrect, duplicated code in the MSR driver
  x86: Merge kernel_thread()
  x86: Sync 32/64-bit kernel_thread
  x86, 32-bit: Use same regs as 64-bit for kernel_thread_helper
  x86, 64-bit: Use user_mode() to determine new stack pointer in copy_thread()
  x86, 64-bit: Move kernel_thread to C
  x86-64, paravirt: Call set_iopl_mask() on 64 bits
  x86-32: Avoid pipeline serialization in PTREGSCALL1 and 2
  x86: Merge sys_clone
  x86, 32-bit: Convert sys_vm86 & sys_vm86old
  x86: Merge sys_sigaltstack
  x86: Merge sys_execve
  x86: Merge sys_iopl
  x86-32: Add new pt_regs stubs
  cpumask: Use modern cpumask style in arch/x86/kernel/cpu/mcheck/mce-inject.c

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix return of trace_dump_stack()
  ksym_tracer: Fix bad cast
  tracing/power: Remove two exports
  tracing: Change event->profile_count to be int type
  tracing: Simplify trace_option_write()
  tracing: Remove useless trace option
  tracing: Use seq file for trace_clock
  tracing: Use seq file for trace_options
  function-graph: Allow writing the same val to set_graph_function
  ftrace: Call trace_parser_clear() properly
  ftrace: Return EINVAL when writing invalid val to set_ftrace_filter
  tracing: Move a printk out of ftrace_raw_reg_event_foo()
  tracing: Pull up calls to trace_define_common_fields()
  tracing: Extract duplicate ftrace_raw_init_event_foo()
  ftrace.h: Use common pr_info fmt string
  tracing: Add stack trace to irqsoff tracer
  tracing: Add trace_dump_stack()
  ring-buffer: Move resize integrity check under reader lock
  ring-buffer: Use sync sched protection on ring buffer resizing
  tracing: Fix wrong usage of strstrip in trace_ksyms

The code in xfs_free_buf() only attempts to free the b_pages array if the
buffer is a page cache backed or page allocated buffer. The extra log buffer
that is used when the log wraps uses pages that are allocated to a different
log buffer, but it still has a b_pages array allocated when those pages
are associated to with the extra buffer in xfs_buf_associate_memory.

Hence we need to always attempt to free the b_pages array when tearing
down a buffer, not just on buffers that are explicitly marked as page bearing
buffers. This fixes a leak detected by the kernel memory leak code.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

For a long time we've always stored bmap btree records in the 64bit format,
so kill off the dead 32bit type, and make sure the 64bit type is named just
xfs_bmbt_rec everywhere, without any size postfix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

Change all async metadata buffers to use [READ|WRITE]_META I/O types
so that the I/O doesn't get issued immediately. This allows merging of
adjacent metadata requests but still prioritises them over bulk data.
This shows a 10-15% improvement in sequential create speed of small
files.

Don't include the log buffers in this classification - leave them as
sync types so they are issued immediately.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

Due to the merge of processor_start() (declared with __cpuinit) into
processor_add(), a section mismatch warning appears:

WARNING: drivers/built-in.o(.text+0x4d59d): Section mismatch in reference
from the function acpi_processor_add() to the function
.cpuinit.text:acpi_processor_power_init()
...

This patch fixes the warning by declaring processor_add() as __cpuinit
and also declares acpi_processor_add_fs() as __cpuinit as it is only
used in acpi_processor_add().
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

Add an assert for inodes not added to the inode cache in xfs_ireclaim,
to make sure we're not going to introduce something like the
famous nfsd inode cache bug again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

v2->v1:
.improve debug info as suggedted by Bjorn,Kenji
.API is using uuid string as suggested by Alexey

Add an API to execute _OSC. A lot of devices can have this method, so add a
generic API.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
  Blackfin: Convert BUG() to use unreachable()
  Blackfin: define __NR_recvmmsg
  Blackfin: drop duplicate sched_clock
  Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
  Blackfin: MPU: add missing __init markings
  Blackfin: add support for TIF_NOTIFY_RESUME
  Blackfin: kgdb_test: clean up code a bit
  Blackfin: convert kgdbtest to proc_fops
  Blackfin: convert cyc2ns() to clocksource_cyc2ns()
  Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
  Blackfin: drop unused ax88180 resources
  Blackfin: bf537-stamp: add ADF702x network driver resources
  Blackfin: bf537-stamp: add CAN resources
  Blackfin: bf537-stamp: add AD5258 i2c address
  Blackfin: bf537-stamp: add adau1761 i2c address
  Blackfin: bf537-stamp: add adau1371 i2c address
  Blackfin: bf537-stamp: add ADP8870 resources
  Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf537-stamp: add ADXL346 orientation sensing support
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: Fix a regression in the NFSv4 state manager
  NFSv4: Release the sequence id before restarting a CLOSE rpc call
  nfs41: fix session fore channel negotiation
  nfs41: do not zero seqid portion of stateid on close
  nfs: run state manager in privileged mode
  nfs: make recovery state manager operations privileged
  nfs: enforce FIFO ordering of operations trying to acquire slot
  rpc: add a new priority in RPC task
  nfs: remove rpc_task argument from nfs4_find_slot
  rpc: add rpc_queue_empty function
  nfs: change nfs4_do_setlk params to identify recovery type
  nfs: do not do a LOOKUP after open
  nfs: minor cleanup of session draining

* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: fix segfault with short symbol names
  module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
  Kbuild: clear marker out of modpost
  module: make MODULE_SYMBOL_PREFIX into a CONFIG option
  ARM: unexport symbols used to implement floating point emulation
  ARM: use unified discard definition in linker script
  x86: don't export inline function
  sparc64: don't export static inline pci_ functions

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] implement early_io{re,un}map for ia64
  [IA64] Replace old style lock initializer
  [IA64] fix SBA IOMMU to handle allocation failure properly
  [IA64] Save I-resources to ia64_sal_os_state
  [IA64] preallocate IA64_IRQ_MOVE_VECTOR

* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux: (42 commits)
  nfsd: remove pointless paths in file headers
  nfsd: move most of nfsfh.h to fs/nfsd
  nfsd: remove unused field rq_reffh
  nfsd: enable V4ROOT exports
  nfsd: make V4ROOT exports read-only
  nfsd: restrict filehandles accepted in V4ROOT case
  nfsd: allow exports of symlinks
  nfsd: filter readdir results in V4ROOT case
  nfsd: filter lookup results in V4ROOT case
  nfsd4: don't continue "under" mounts in V4ROOT case
  nfsd: introduce export flag for v4 pseudoroot
  nfsd: let "insecure" flag vary by pseudoflavor
  nfsd: new interface to advertise export features
  nfsd: Move private headers to source directory
  vfs: nfsctl.c un-used nfsd #includes
  lockd: Remove un-used nfsd headers #includes
  s390: remove un-used nfsd #includes
  sparc: remove un-used nfsd #includes
  parsic: remove un-used nfsd #includes
  compat.c: Remove dependence on nfsd private headers
  ...