- 22 Jan, 2017 6 commits
-
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Nicholas Mc Guire authored
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 35ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Fixes: commit 4d33615d ("iio: light: add MAX30100 oximeter driver support") Link: http://lkml.org/lkml/2017/1/11/377Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Phil Reid authored
This adds TI's tlc4541 16-bit ADC driver. Which is a single channel ADC. Supports raw and trigger buffer access. Also supports the tlc3541 14-bit device, which has not been tested. Implementation of the tlc3541 is fairly straight forward thou. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Jacopo Mondi authored
Add device tree bindings documentation for Maxim MAX11100 single-channel ADC Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 21 Jan, 2017 6 commits
-
-
Jacopo Mondi authored
Add iio driver for Maxim MAX11100 single-channel ADC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Alison Schofield authored
Replace the types with the actual variable names when using the sizeof() operator. This is kernel preferred style as it's more obvious that it is correct. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Arnd Bergmann authored
When CONFIG_PM_SLEEP is disabled, we get a harmless warning drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function] drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function] Marking the functions as possibly unused avoids the warning without needing to add an #ifdef. Fixes: 8afa505c ("iio: light: add driver for Capella CM3605") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Alison Schofield authored
Driver was checking for direct mode before changing oversampling ratios, but was not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode while the oversampling ratios are being updated. Continue to use the drivers private state lock to protect against conflicting direct mode access of the state data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Alison Schofield authored
Driver was checking for direct mode but not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode during raw reads of proximity data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Vlad Dogaru <ddvlad@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Alison Schofield authored
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 15 Jan, 2017 3 commits
-
-
David Lechner authored
This changes the reference voltage regulator matching string from "refin" to "vref". This is to be consistent with other A/DC chips that also use "vref-supply" in their device tree bindings. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
David Lechner authored
This drops the "ti-" prefix from the module name. It makes the module name consistent with other iio ti-ads* drivers and it makes the driver work with device tree (the spi subsystem drops the "ti," prefix when matching compatible strings from device tree). Tested working on LEGO MINDSTORMS EV3 with the following device tree node: adc@3 { compatible = "ti,ads7957"; reg = <3>; #io-channel-cells = <1>; spi-max-frequency = <10000000>; vref-supply = <&adc_ref>; }; Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
David Lechner authored
This adds device tree bindings for the TI ADS7950 family of A/DC chips. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 14 Jan, 2017 6 commits
-
-
Colin Ian King authored
At the end of the delay loop timeout will always be zero and hence the check for !timeout will always be true. Remove the redundant check and the redundant return 0 at the end of the function. Fixes CoverityScan CID#1357168 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Enric Balletbo i Serra authored
To follow iio guidelines Where possible we stick to the raw SI unit, so specify meters for proximity. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6ds3.pdf http://www.st.com/resource/en/datasheet/lsm6dsm.pdf - continuous mode support - i2c support - spi support - sw fifo mode support - supported devices: lsm6ds3, lsm6dsm Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Linus Walleij authored
When a consumer calls iio_read_channel_processed() the IIO core tries to apply scaling to the value, but if the channel only supports reading raw values, we should return that raw value to the cosumer instead of an error. This is what userspace is expected to do with sensors only providing raw values so the kernel should do the same, so as to avoid adding scaling boilerplate to drivers for hardware that actually return processed values from raw reads. A sensor not providing a scale, but providing a _raw attribute could be valid if for example the scale is the default of 1, but an offset needs to be applied to convert to the _processed form. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Manivannan Sadhasivam authored
This patch adds support for TI TMP007 - 16 bit IR thermopile sensor with integrated Math engine. Sensor takes care of calculating the object temperature with the help of calibrated constants stored in non-volatile memory, thereby reducing the calculation overhead. Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 10 Jan, 2017 19 commits
-
-
Jonathan Cameron authored
Another one of these that we missed previously which prevents test builds of this driver on 32 bit platforms as it gives an undefined __divdi3 warning. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Jonathan Cameron authored
It is meant to be long and is only added to an s64. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Rama Krishna Phani A <rphani@codeaurora.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Jonathan Cameron authored
A simple do_div call works here as all the signed 64 bit is actually small and unsigned at this point, and the numerator is u32. Introduce a temporary u64 variable to avoid type comparison warnings on some architectures. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Rama Krishna Phani A <rphani@codeaurora.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Andreas Klinger authored
This is the IIO driver for AVIA HX711 ADC which is mostly used in weighting cells. The protocol is quite simple and using GPIOs: One GPIO is used as clock (SCK) while another GPIO is read (DOUT) The raw value read from the chip is delivered. To get a weight one needs to subtract the zero offset and scale it. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Andreas Klinger authored
Add DT bindings for avia,hx711 Add vendor avia to vendor list Signed-off-by: Andreas Klinger <ak@it-klinger.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Hans de Goede authored
For some reason the axp288_adc driver was modifying the AXP288_ADC_TS_PIN_CTRL register, changing bits 0-1 depending on whether the GP_ADC channel or another channel was written. These bits control when a bias current is send to the TS_PIN, the GP_ADC has its own pin and a separate bit in another register to control the bias current. Not only does changing when to enable the TS_PIN bias current (always or only when sampling) when reading the GP_ADC make no sense at all, the code is modifying these bits is writing the entire register, assuming that all the other bits have their default value. So if the firmware has configured a different bias-current for either pin, then that change gets clobbered by the write, likewise if the firmware has set bit 2 to indicate that the battery has no thermal sensor, this will get clobbered by the write. This commit fixes all this, by simply removing all writes to the AXP288_ADC_TS_PIN_CTRL register, they are not needed to read the GP_ADC pin, and can actually be harmful. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Scott Matheina authored
Fixes style issue where Alignment doesn't match open parenthesis Signed-off-by: Scott Matheina <scott@matheina.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Javier Martinez Canillas authored
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias $ After this patch: $ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias alias: of:N*T*Cfsl,imx25-gcqC* alias: of:N*T*Cfsl,imx25-gcq Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Jonathan Cameron authored
buffer.h supplies everything needed for devices using buffers. buffer_impl.h supplies access to the internals as needed to write a buffer implementation. This was really motivated by the mess that turned up in the kernel-doc documentation pulled in by the new sphinx docs. It made it clear that our logical separations in headers were generally terrible. The buffer case was easy to sort out without greatly effecting drivers so here it is. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
It's bad practice and only done in this fake driver + it breaks my attempt to take struct buffer opaque. Not worth an access function as it shouldn't be done anyway. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
This is a precursor to the splitting of buffer.h into parts relevant to buffer implementation vs those for devices using buffers. struct buffer is about to become opaque as far as the header is concerned. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
These were only getting access to the internals of struct iio_dev via the include of iio.h within buffer.h. This should always have been explicitly included by the buffer implementations themselves. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
As a precursor to splitting buffer.h, lets make sure all drivers include the relevant headers rather than relying on picking them up from kfifo_buf.h. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
Wrong start of kernel doc comment /* -> /** Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
Ancient legacy of me doing it wrong which it is nice to clear up whilst we are here. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
Nothing uses it outside of core code. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
This is a necessary step in taking the buffer implementation opaque. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
This should make it easier to see how the structure is split into public and private parts - reflected in the generated documentation. Deliberately use /* instead of /** for the private elements to avoid warnings when kernel-doc script runs. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
Nothing outside of indiustrialio-buffer.c should be using this. Requires a large amount of juggling of functions to avoid a forward definition. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
-