- 20 Jan, 2015 3 commits
-
-
Rui Wang authored
There are still some places in the fb helper that need to avoid sleeping in panic context. Here's an example: [ 65.615496] bad: scheduling from the idle thread! [ 65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G M E 3.18.0-rc4-7-default+ #20 [ 65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0056.R01.1409242327 09/24/2014 [ 65.641923] ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000 [ 65.650226] ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0 [ 65.658527] ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8 [ 65.666830] Call Trace: [ 65.669557] <#MC> [<ffffffff81566db9>] dump_stack+0x46/0x58 [ 65.675994] [<ffffffff810871ff>] dequeue_task_idle+0x2f/0x40 [ 65.682412] [<ffffffff8107c1fa>] dequeue_task+0x5a/0x80 [ 65.688345] [<ffffffff810804f3>] deactivate_task+0x23/0x30 [ 65.694569] [<ffffffff81569050>] __schedule+0x580/0x7f0 [ 65.700502] [<ffffffff81569739>] schedule_preempt_disabled+0x29/0x70 [ 65.707696] [<ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162 [ 65.714891] [<ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85 [ 65.721125] [<ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm] [ 65.728132] [<ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm] [ 65.735721] [<ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm] [ 65.743015] [<ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper] [ 65.751857] [<ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0 [ 65.758081] [<ffffffff81326010>] bit_update_start+0x20/0x50 [ 65.764400] [<ffffffff813259f2>] fbcon_switch+0x3a2/0x550 [ 65.770528] [<ffffffff813a01c9>] redraw_screen+0x189/0x240 [ 65.776750] [<ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0 [ 65.782778] [<ffffffff8137d359>] ? erst_writer+0x209/0x330 [ 65.789002] [<ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80 [ 65.795710] [<ffffffff810bc137>] ? mod_timer+0x127/0x1e0 [ 65.801740] [<ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0 [ 65.808255] [<ffffffff813a0e10>] unblank_screen+0x10/0x20 [ 65.814381] [<ffffffff812ca0d9>] bust_spinlocks+0x19/0x40 [ 65.820508] [<ffffffff81561ca7>] panic+0x106/0x1f5 [ 65.825955] [<ffffffff8102336c>] mce_panic+0x2ac/0x2e0 [ 65.831789] [<ffffffff812c796a>] ? delay_tsc+0x4a/0x80 [ 65.837625] [<ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0 [ 65.844138] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150 [ 65.850166] [<ffffffff8156f03f>] machine_check+0x1f/0x30 [ 65.856195] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150 [ 65.862222] <<EOE>> [<ffffffff814283d5>] cpuidle_enter_state+0x55/0x170 [ 65.869823] [<ffffffff814285a7>] cpuidle_enter+0x17/0x20 [ 65.875852] [<ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370 [ 65.882467] [<ffffffff8102fe29>] start_secondary+0x159/0x180 There's __drm_modeset_lock_all() which Daniel Vetter introduced for this purpose. We can leverage that without reinventing anything. This patch works with the latest kernel. Reviewed-by:
Rob Clark <robdclark@gmail.com> Tested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull request includes below fixups, - Remove duplicated machine checking. . It seems that this code was added when you merged 'v3.18-rc7' into drm-next. commit id : e8115e79 - Fix hdmiphy reset. . Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other is APB bus - memory mapped I/O. So this patch makes hdmiphy reset to be done according to interfaces, I2C or APB bus. - And add some exception codes. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix warning of vblank reference count drm/exynos: remove unnecessary runtime pm operations drm/exynos: fix reset codes for memory mapped hdmi phy drm/exynos: remove the redundant machine checking code
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Some radeon fixes for 3.19: - GPUVM stability fixes - SI dpm quirks - Regression fixes * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: use rv515_ring_start on r5xx drm/radeon: add si dpm quirk list drm/radeon: don't print error on -ERESTARTSYS drm/radeon: add a dpm quirk list drm/radeon: fix VM flush on CIK (v3) drm/radeon: fix VM flush on SI (v3) drm/radeon: fix VM flush on cayman/aruba (v3)
-
- 18 Jan, 2015 7 commits
-
-
Joonyoung Shim authored
Prevented re-enabling the vblank interrupt by drm_vblank_off and drm_vblank_get from mixer_wait_for_vblank returns error after drm_vblank_off. We get below warnings without this error handling because vblank reference count is mismatched by above sequence. setting mode 1920x1080-60Hz@XR24 on connectors 16, crtc 13 [ 19.900793] ------------[ cut here ]------------ [ 19.903959] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/drm_irq.c:1072 exynos_drm_crtc_finish_pageflip+0xac/0xdc() [ 19.914076] Modules linked in: [ 19.917116] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-rc4-00040-g3d729789-dirty #46 [ 19.925342] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 19.931437] [<c0014430>] (unwind_backtrace) from [<c001158c>] (show_stack+0x10/0x14) [ 19.939131] [<c001158c>] (show_stack) from [<c04cdd50>] (dump_stack+0x84/0xc4) [ 19.946329] [<c04cdd50>] (dump_stack) from [<c00226f4>] (warn_slowpath_common+0x80/0xb0) [ 19.954382] [<c00226f4>] (warn_slowpath_common) from [<c00227c0>] (warn_slowpath_null+0x1c/0x24) [ 19.963132] [<c00227c0>] (warn_slowpath_null) from [<c02c20cc>] (exynos_drm_crtc_finish_pageflip+0xac/0xdc) [ 19.972841] [<c02c20cc>] (exynos_drm_crtc_finish_pageflip) from [<c02cb7ec>] (mixer_irq_handler+0xdc/0x104) [ 19.982546] [<c02cb7ec>] (mixer_irq_handler) from [<c005c904>] (handle_irq_event_percpu+0x78/0x134) [ 19.991555] [<c005c904>] (handle_irq_event_percpu) from [<c005c9fc>] (handle_irq_event+0x3c/0x5c) [ 20.000395] [<c005c9fc>] (handle_irq_event) from [<c005f384>] (handle_fasteoi_irq+0xe0/0x1ac) [ 20.008885] [<c005f384>] (handle_fasteoi_irq) from [<c005bf88>] (generic_handle_irq+0x2c/0x3c) [ 20.017463] [<c005bf88>] (generic_handle_irq) from [<c005c254>] (__handle_domain_irq+0x7c/0xec) [ 20.026128] [<c005c254>] (__handle_domain_irq) from [<c0008698>] (gic_handle_irq+0x30/0x68) [ 20.034449] [<c0008698>] (gic_handle_irq) from [<c00120c0>] (__irq_svc+0x40/0x74) [ 20.041893] Exception stack(0xc06fff68 to 0xc06fffb0) [ 20.046923] ff60: 00000000 00000000 000052f6 c001b460 c06fe000 c07064e8 [ 20.055070] ff80: c04d743c c07392a2 c0739440 c06da340 ef7fca80 00000000 01000000 c06fffb0 [ 20.063212] ffa0: c000f24c c000f250 60000013 ffffffff [ 20.068245] [<c00120c0>] (__irq_svc) from [<c000f250>] (arch_cpu_idle+0x38/0x3c) [ 20.075611] [<c000f250>] (arch_cpu_idle) from [<c0050948>] (cpu_startup_entry+0x108/0x16c) [ 20.083846] [<c0050948>] (cpu_startup_entry) from [<c06aec5c>] (start_kernel+0x3a0/0x3ac) [ 20.091980] ---[ end trace 2c76ee0500489d1b ]--- Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Joonyoung Shim authored
In booting, we can see a below message. [ 3.241728] exynos-mixer 14450000.mixer: Unbalanced pm_runtime_enable! Already pm_runtime_enable is called by probe function. Remove pm_runtime_enable/disable from mixer_bind and mixer_unbind. Signed-off-by:
-
Joonyoung Shim authored
This fixes reset codes to support memory mapped hdmi phy as well as hdmi phy dedicated i2c lines. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull clock driver fixes from Mike Turquette: "Small number of fixes for clock drivers and a single null pointer dereference fix in the framework core code. The driver fixes vary from fixing section mismatch warnings to preventing machines from hanging (and preventing developers from crying)" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: fix possible null pointer dereference Revert "clk: ppc-corenet: Fix Section mismatch warning" clk: rockchip: fix deadlock possibility in cpuclk clk: berlin: bg2q: remove non-exist "smemc" gate clock clk: at91: keep slow clk enabled to prevent system hang clk: rockchip: fix rk3288 cpuclk core dividers clk: rockchip: fix rk3066 pll lock bit location clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is one fix for a Multiqueue sleeping in invalid context problem and a MAINTAINER file update for Qlogic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ->queue_rq can't sleep MAINTAINERS: Update maintainer list for qla4xxx
-
- 17 Jan, 2015 18 commits
-
-
Stanimir Varbanov authored
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org>
-
Kevin Hao authored
This reverts commit da788acb. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Heiko Stübner authored
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by:Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Two patches, the first by Andy to fix dw dmac runtime pm and second one by me to fix the dmaengine headers in MAINTAINERS" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: balance PM runtime calls MAINTAINERS: dmaengine: fix the header file for dmaengine
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also two PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools powerpc: Use dwfl_report_elf() instead of offline. perf tools: Fix segfault for symbol annotation on TUI perf test: Fix dwarf unwind using libunwind. perf tools: Avoid build splat for syscall numbers with uclibc perf tools: Elide strlcpy warning with uclibc perf tools: Fix statfs.f_type data type mismatch build error with uclibc tools: Remove bitops/hweight usage of bits in tools/perf perf machine: Fix __machine__findnew_thread() error path perf tools: Fix building error in x86_64 when dwarf unwind is on perf probe: Propagate error code when write(2) failed perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM perf/rapl: Fix sysfs_show() initialization for RAPL PMU
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix segfault when using both the map symtab viewer and annotation in the TUI (Namhyung Kim). - uClibc build fixes (Alexey Brodkin, Vineet Gupta). - bitops/hweight were moved from tools/perf/ too tools/include, move some leftovers (Arnaldo Carvalho de Melo) - Fix dwarf unwind x86_64 build error (Namhyung Kim) - Fix __machine__findnew_thread() error path (Namhyung Kim) - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim) - Use dwfl_report_elf() instead of offline in powerpc bits to properly handle non prelinked DSOs (Sukadev Bhattiprolu). - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Olof Johansson authored
Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.19" from Kukjin Kim: Samsung fixes for v3.19 - exynos_defconfig: enable LM90 driver and display panel support - HWMON - SENSORS_LM90 - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support - use pmu_system_controller phandle for dp phy : DP PHY requires pmu_system_controller to handle PMU reg. now * tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Tyler Baker authored
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimusSigned-off-by:
Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: Renesas ARM Based SoC Fixes for v3.19 This pull request is based on the last round of SoC updates for v3.19, Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as renesas-soc3-for-v3.19, merged into your next/soc branch and included in v3.19-rc1. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds Set .control_parent for all irqpin instances for sh73a0 SoC when booting using legacy C. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds This fixes a long standing problem which has been present since the sh73a0 SoC started using the INTC External IRQ pin driver. The patch that introduced the problem is 341eb546 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") which was included in v3.10. * tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
-
Abhilash Kesavan authored
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
-
Abhilash Kesavan authored
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
-
Olof Johansson authored
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre: First fixes batch for AT91 on 3.19: - fix some DT entries - correct clock entry for the at91sam9263 LCD - add a phy_fixup for Eth1 on sama5d4 * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length Signed-off-by:
-
Heiko Stübner authored
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by:
-
Olof Johansson authored
Merge tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth: Marvell Berlin fixes for v3.19 round 1: - SDHCI DT fixes for BG2Q and BG2Q reference board - BG2Q SM GPIO DT node relocation * tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host Signed-off-by:
-
Linus Walleij authored
We altered the device tree bindings for the Nomadik family of pin controllers to be standard, this file was merged out-of-order so we missed fixing this. Fix it up. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.19-rc1" from Tony Lindgren: Fixes for omaps mostly to deal with dra7 timer issues and hypervisor mode. The other fixes are minor fixes for various boards. The summary of the fixes is: - Fix real-time counter rate typos for some frequencies - Fix counter frequency drift for am572x - Fix booting of secondary CPU in HYP mode - Fix n900 board name for legacy user space - Fix cpufreq in omap2plus_defconfig after Kconfig change - Fix dra7 qspi partitions And also, let's re-enable smc91x on some n900 boards that we have sitting in a few test boot systems after the boot loader dependencies got fixed. * tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Revert disabling of smc91x for n900 ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ARM: OMAP2+: Fix n900 board name for legacy user space ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode ARM: dra7xx: Fix counter frequency drift for AM572x errata i856 ARM: omap5/dra7xx: Fix frequency typos Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19" from Shawn Guo: The i.MX fixes for 3.19: - One fix for incorrect i.MX25 SPI1 clock assignment in device tree, which causes system hang when accessing SPI1. - Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops. - Fix ULPI PHY reset modelling on imx51-babbage board to remove the dependency on bootloader for USB3317 ULPI PHY reset. - Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue that HDMI is not working at high resolution on T0 1.0. - One incremental fix for CODA960 VPU enabling in device tree to correct interrupt order. - LS1021A SCFG block works in BE mode, add device tree property big-endian to make it right. * tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: imx6sx: Set PLL2 as parent of QSPI clocks ARM: dts: imx25: Fix the SPI1 clocks ARM: clk-imx6q: fix video divider for rev T0 1.0 ARM: dts: imx6qdl: Fix CODA960 interrupt order ARM: ls1021a: dtsi: add 'big-endian' property for scfg node Signed-off-by:
-
Olof Johansson authored
Merge tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner: Increase drive-strength to sdmmc pins on rk3288-evb to fix an issue with the fixed highspeed card detection. * tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb Signed-off-by:
-
- 16 Jan, 2015 12 commits
-
-
Louis Langholtz authored
Avoid overflow possibility. [ The overflow is purely theoretical, since this is used for memory ranges that aren't even close to using the full 64 bits, but this is the right thing to do regardless. - Linus ] Signed-off-by:
Louis Langholtz <lou_langholtz@me.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Peter Anvin <hpa@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sukadev Bhattiprolu authored
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by:
-
Namhyung Kim authored
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Wang Nan authored
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by:Wang Nan <wangnan0@huawei.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Vineet Gupta authored
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by:Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.comSigned-off-by:
-
Vineet Gupta authored
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by: -
Alexey Brodkin authored
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by:
Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Namhyung Kim authored
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by:
-
Namhyung Kim authored
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are three small driver fixes for reported issues for 3.19-rc5. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0 mei: add ABI documentation for fw_status exported through sysfs mei: clean reset bit before reset
-
