- 20 Nov, 2019 21 commits
-
-
Mike Marciniszyn authored
commit 22bb1365 upstream. There is no reason for a different pad buffer for the two packet types. Expand the current buffer allocation to allow for both packet types. Fixes: f8195f3b ("IB/hfi1: Eliminate allocation while atomic") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.comSigned-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Erwin authored
commit a9c3c4c5 upstream. If an hfi1 card is inserted in a Gen4 systems, the driver will avoid the gen3 speed bump and the card will operate at half speed. This is because the driver avoids the gen3 speed bump when the parent bus speed isn't identical to gen3, 8.0GT/s. This is not compatible with gen4 and newer speeds. Fix by relaxing the test to explicitly look for the lower capability speeds which inherently allows for gen4 and all future speeds. Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20191101192059.106248.1699.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: James Erwin <james.erwin@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chuhong Yuan authored
commit ba60cf9f upstream. The driver forgets to destroy workqueue in remove() similarly to what is done when probe() fails. Add a call to destroy_workqueue() to fix it. Since unregistration will wait for the work to finish, we do not need to cancel/flush the work instance in remove(). Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191114023405.31477-1-hslester96@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lucas Stach authored
commit 549766ac upstream. The driver for F54 just polls the status and doesn't even have a IRQ handler registered. Make sure to disable all F54 IRQs, so we don't crash the kernel on a nonexistent handler. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20191105114402.6009-1-l.stach@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Duggan authored
commit 5d40d95e upstream. Currently, rmi_f11_attention() and rmi_f12_attention() functions update the attn_data data pointer and size based on the size of the expected size of the attention data. However, if the actual valid data in the attn buffer is less then the expected value then the updated data pointer will point to memory beyond the end of the attn buffer. Using the calculated valid_bytes instead will prevent this from happening. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191025002527.3189-3-aduggan@synaptics.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Duggan authored
commit f6aabe1f upstream. This patch fixes an issue seen on HID touchpads which report finger positions using RMI4 Function 12. The issue manifests itself as spurious button presses as described in: https://www.spinics.net/lists/linux-input/msg58618.html Commit 24d28e4f ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") switched the RMI4 driver to using an irq_domain to handle RMI4 function interrupts. Functions with more then one interrupt now have each interrupt mapped to their own IRQ and IRQ handler. The result of this change is that the F12 IRQ handler was now getting called twice. Once for the absolute data interrupt and once for the relative data interrupt. For HID devices, calling rmi_f12_attention() a second time causes the attn_data data pointer and size to be set incorrectly. When the touchpad button is pressed, F30 will generate an interrupt and attempt to read the F30 data from the invalid attn_data data pointer and report incorrect button events. This patch disables the F12 relative interrupt which prevents rmi_f12_attention() from being called twice. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Simon Wood <simon@mungewell.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lucas Stach authored
commit 003f01c7 upstream. The video buffer used by the queue is a vb2_v4l2_buffer, not a plain vb2_buffer. Using the wrong type causes the allocation of the buffer storage to be too small, causing a out of bounds write when __init_vb2_v4l2_buffer initializes the buffer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 3a762dbd ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191104114454.10500-1-l.stach@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit fa3a5a18 upstream. No timer must be left running when the device goes away. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-and-tested-by: syzbot+b6c55daa701fc389e286@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1573726121.17351.3.camel@suse.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit e6c61710 upstream. During rename exchange we might have successfully log the new name in the source root's log tree, in which case we leave our log context (allocated on stack) in the root's list of log contextes. However we might fail to log the new name in the destination root, in which case we fallback to a transaction commit later and never sync the log of the source root, which causes the source root log context to remain in the list of log contextes. This later causes invalid memory accesses because the context was allocated on stack and after rename exchange finishes the stack gets reused and overwritten for other purposes. The kernel's linked list corruption detector (CONFIG_DEBUG_LIST=y) can detect this and report something like the following: [ 691.489929] ------------[ cut here ]------------ [ 691.489947] list_add corruption. prev->next should be next (ffff88819c944530), but was ffff8881c23f7be4. (prev=ffff8881c23f7a38). [ 691.489967] WARNING: CPU: 2 PID: 28933 at lib/list_debug.c:28 __list_add_valid+0x95/0xe0 (...) [ 691.489998] CPU: 2 PID: 28933 Comm: fsstress Not tainted 5.4.0-rc6-btrfs-next-62 #1 [ 691.490001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 691.490003] RIP: 0010:__list_add_valid+0x95/0xe0 (...) [ 691.490007] RSP: 0018:ffff8881f0b3faf8 EFLAGS: 00010282 [ 691.490010] RAX: 0000000000000000 RBX: ffff88819c944530 RCX: 0000000000000000 [ 691.490011] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffa2c497e0 [ 691.490013] RBP: ffff8881f0b3fe68 R08: ffffed103eaa4115 R09: ffffed103eaa4114 [ 691.490015] R10: ffff88819c944000 R11: ffffed103eaa4115 R12: 7fffffffffffffff [ 691.490016] R13: ffff8881b4035610 R14: ffff8881e7b84728 R15: 1ffff1103e167f7b [ 691.490019] FS: 00007f4b25ea2e80(0000) GS:ffff8881f5500000(0000) knlGS:0000000000000000 [ 691.490021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 691.490022] CR2: 00007fffbb2d4eec CR3: 00000001f2a4a004 CR4: 00000000003606e0 [ 691.490025] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 691.490027] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 691.490029] Call Trace: [ 691.490058] btrfs_log_inode_parent+0x667/0x2730 [btrfs] [ 691.490083] ? join_transaction+0x24a/0xce0 [btrfs] [ 691.490107] ? btrfs_end_log_trans+0x80/0x80 [btrfs] [ 691.490111] ? dget_parent+0xb8/0x460 [ 691.490116] ? lock_downgrade+0x6b0/0x6b0 [ 691.490121] ? rwlock_bug.part.0+0x90/0x90 [ 691.490127] ? do_raw_spin_unlock+0x142/0x220 [ 691.490151] btrfs_log_dentry_safe+0x65/0x90 [btrfs] [ 691.490172] btrfs_sync_file+0x9f1/0xc00 [btrfs] [ 691.490195] ? btrfs_file_write_iter+0x1800/0x1800 [btrfs] [ 691.490198] ? rcu_read_lock_any_held.part.11+0x20/0x20 [ 691.490204] ? __do_sys_newstat+0x88/0xd0 [ 691.490207] ? cp_new_stat+0x5d0/0x5d0 [ 691.490218] ? do_fsync+0x38/0x60 [ 691.490220] do_fsync+0x38/0x60 [ 691.490224] __x64_sys_fdatasync+0x32/0x40 [ 691.490228] do_syscall_64+0x9f/0x540 [ 691.490233] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 691.490235] RIP: 0033:0x7f4b253ad5f0 (...) [ 691.490239] RSP: 002b:00007fffbb2d6078 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 691.490242] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f4b253ad5f0 [ 691.490244] RDX: 00007fffbb2d5fe0 RSI: 00007fffbb2d5fe0 RDI: 0000000000000003 [ 691.490245] RBP: 000000000000000d R08: 0000000000000001 R09: 00007fffbb2d608c [ 691.490247] R10: 00000000000002e8 R11: 0000000000000246 R12: 00000000000001f4 [ 691.490248] R13: 0000000051eb851f R14: 00007fffbb2d6120 R15: 00005635a498bda0 This started happening recently when running some test cases from fstests like btrfs/004 for example, because support for rename exchange was added last week to fsstress from fstests. So fix this by deleting the log context for the source root from the list if we have logged the new name in the source root. Reported-by: Su Yue <Damenly_Su@gmx.com> Fixes: d4682ba0 ("Btrfs: sync log after logging new name") CC: stable@vger.kernel.org # 4.19+ Tested-by: Su Yue <Damenly_Su@gmx.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 976a68f0 upstream. The recently introduced unit descriptor validation had some bug for processing and extension units, it counts a bControlSize byte twice so it expected a bigger size than it should have been. This seems resulting in a probe error on a few devices. Fix the calculation for proper checks of PU and EU. Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit cc9dbfa9 upstream. The commit 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Henry Lin authored
commit 52869931 upstream. While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by: Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 167beb17 upstream. A check of the return value from get_cur_mix_raw() is missing at the resolution test code in get_min_max_with_quirks(), which may leave the variable untouched, leading to a random uninitialized value, as detected by syzkaller fuzzer. Add the missing return error check for fixing that. Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jouni Hogander authored
[ Upstream commit 3b5a3997 ] Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected by Syzkaller in slcan. Same issue exists in slip.c and this patch is addressing the leak in slip.c. Here is the slcan memory leak trace reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xfffffffffffffff Cc: "David S. Miller" <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aleksander Morgado authored
[ Upstream commit 802753cb ] These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The QMI interface is exposed in USB configuration #1: P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chuhong Yuan authored
[ Upstream commit 18d647ae ] This driver forgets to free allocated netdev in remove like what is done in probe failure. Add the free to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
[ Upstream commit 7901cd97 ] In route.c, inet_rtm_getroute_build_skb() creates an skb with no headroom. This skb is then used by inet_rtm_getroute() which may pass it to rt_fill_info() and, from there, to ipmr_get_route(). The later might try to reuse this skb by cloning it and prepending an IPv4 header. But since the original skb has no headroom, skb_push() triggers skb_under_panic(): skbuff: skb_under_panic: text:00000000ca46ad8a len:80 put:20 head:00000000cd28494e data:000000009366fd6b tail:0x3c end:0xec0 dev:veth0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:108! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:skb_panic+0xbf/0xd0 Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 RSP: 0018:ffff888059ddf0b0 EFLAGS: 00010286 RAX: 0000000000000086 RBX: ffff888060a315c0 RCX: ffffffff8abe4822 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88806c9a79cc RBP: ffff888059ddf118 R08: ffffed100d9361b1 R09: ffffed100d9361b0 R10: ffff88805c68aee3 R11: ffffed100d9361b1 R12: ffff88805d218000 R13: ffff88805c689fec R14: 000000000000003c R15: 0000000000000ec0 FS: 00007f6af184b700(0000) GS:ffff88806c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc8204a000 CR3: 0000000057b40006 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_push+0x7e/0x80 ipmr_get_route+0x459/0x6fa rt_fill_info+0x692/0x9f0 inet_rtm_getroute+0xd26/0xf20 rtnetlink_rcv_msg+0x45d/0x630 netlink_rcv_skb+0x1a5/0x220 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x305/0x3a0 netlink_sendmsg+0x575/0x730 sock_sendmsg+0xb5/0xc0 ___sys_sendmsg+0x497/0x4f0 __sys_sendmsg+0xcb/0x150 __x64_sys_sendmsg+0x48/0x50 do_syscall_64+0xd2/0xac0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Actually the original skb used to have enough headroom, but the reserve_skb() call was lost with the introduction of inet_rtm_getroute_build_skb() by commit 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE"). We could reserve some headroom again in inet_rtm_getroute_build_skb(), but this function shouldn't be responsible for handling the special case of ipmr_get_route(). Let's handle that directly in ipmr_get_route() by calling skb_realloc_headroom() instead of skb_clone(). Fixes: 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
[ Upstream commit a9a51bd7 ] If a malicious device gives a short MAC it can elicit up to 5 bytes of leaked memory out of the driver. We need to check for ETH_ALEN instead. Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Schmitz authored
commit 9393c8de upstream. In scsi_mq_setup_tags(), cmd_size is calculated based on zero size for the scatter-gather list in case the low level driver uses SG_NONE in its host template. cmd_size is passed on to the block layer for calculation of the request size, and we've seen NULL pointer dereference errors from the block layer in drivers where SG_NONE is used and a mq IO scheduler is active, apparently as a consequence of this (see commit 68ab2d76 ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE"), and a recent patch by Finn Thain converting the three m68k NFR5380 drivers to avoid setting SG_NONE). Try to avoid these errors by accounting for at least one sg list entry when calculating cmd_size, regardless of whether the low level driver set a zero sg_tablesize. Tested on 030 m68k with the atari_scsi driver - setting sg_tablesize to SG_NONE no longer results in a crash when loading this driver. CC: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/1572922150-4358-1-git-send-email-schmitzmic@gmail.comSigned-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Gorski authored
commit 8a38dacf upstream. The Ethernet Switch core mask was set to 0, causing the switch core to be not reset on BCM6368 on boot. Provide the proper mask so the switch core gets reset to a known good state. Fixes: 799faa62 ("MIPS: BCM63XX: add core reset helper") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
[ Upstream commit bf03d4f9 ] Checking for 32-bit PAE is quite common around code that fiddles with the PDPTRs. Add a function to compress all checks into a single invocation. Moving to the common helper also fixes a subtle bug in kvm_set_cr3() where it fails to check is_long_mode() and results in KVM incorrectly attempting to load PDPTRs for a 64-bit guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [sean: backport to 4.x; handle vmx.c split in 5.x, call out the bugfix] Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
- 12 Nov, 2019 19 commits
-
-
Greg Kroah-Hartman authored
-
Junaid Shahid authored
commit 1aa9b957 upstream. The page table pages corresponding to broken down large pages are zapped in FIFO order, so that the large page can potentially be recovered, if it is not longer being used for execution. This removes the performance penalty for walking deeper EPT page tables. By default, one large page will last about one hour once the guest reaches a steady state. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Junaid Shahid authored
commit c57c8046 upstream. Add a function to create a kernel thread associated with a given VM. In particular, it ensures that the worker thread inherits the priority and cgroups of the calling thread. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit b8e8c830 upstream. With some Intel processors, putting the same virtual address in the TLB as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit and cause the processor to issue a machine check resulting in a CPU lockup. Unfortunately when EPT page tables use huge pages, it is possible for a malicious guest to cause this situation. Add a knob to mark huge pages as non-executable. When the nx_huge_pages parameter is enabled (and we are using EPT), all huge pages are marked as NX. If the guest attempts to execute in one of those pages, the page is broken down into 4K pages, which are then marked executable. This is not an issue for shadow paging (except nested EPT), because then the host is in control of TLB flushes and the problematic situation cannot happen. With nested EPT, again the nested guest can cause problems shadow and direct EPT is treated in the same way. [ tglx: Fixup default to auto and massage wording a bit ] Originally-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 9167ab79 upstream. VMX already does so if the host has SMEP, in order to support the combination of CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in fact VMX also ends up running with EFER.NXE=1 on old processors that lack the "load EFER" controls, because it may help avoiding a slow MSR write. SVM does not have similar code, but it should since recent AMD processors do support SMEP. So this patch makes the code for the two vendors simpler and more similar, while fixing an issue with CR0.WP=1 and CR4.SMEP=1 on AMD. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 335e192a upstream. These are useful in debugging shadow paging. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit e9f2a760 upstream. Note that in such a case it is quite likely that KVM will BUG_ON in __pte_list_remove when the VM is closed. However, there is no immediate risk of memory corruption in the host so a WARN_ON is enough and it lets you gather traces for debugging. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit d679b326 upstream. After the previous patch, the low bits of the gfn are masked in both FNAME(fetch) and __direct_map, so we do not need to clear them in transparent_hugepage_adjust. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 3fcf2d1b upstream. These two functions are basically doing the same thing through kvm_mmu_get_page, link_shadow_page and mmu_set_spte; yet, for historical reasons, their code looks very different. This patch tries to take the best of each and make them very similar, so that it is easy to understand changes that apply to both of them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Junaid Shahid authored
commit 43fdcda9 upstream. Release the page at the call-site where it was originally acquired. This makes the exit code cleaner for most call sites, since they do not need to duplicate code between success and the failure label. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Junaid Shahid authored
commit 0d9ce162 upstream. It doesn't seem as if there is any particular need for kvm_lock to be a spinlock, so convert the lock to a mutex so that sleepable functions (in particular cond_resched()) can be called while holding it. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 833b45de upstream. The largepages debugfs entry is incremented/decremented as shadow pages are created or destroyed. Clearing it will result in an underflow, which is harmless to KVM but ugly (and could be misinterpreted by tools that use debugfs information), so make this particular statistic read-only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kvm-ppc@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gomez Iglesias, Antonio authored
commit 7f00cc8d upstream. Add the initial ITLB_MULTIHIT documentation. [ tglx: Add it to the index so it gets actually built. ] Signed-off-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com> Signed-off-by: Nelson D'Souza <nelson.dsouza@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tyler Hicks authored
commit 731dc9df upstream. A kernel module may need to check the value of the "mitigations=" kernel command line parameter as part of its setup when the module needs to perform software mitigations for a CPU flaw. Uninline and export the helper functions surrounding the cpu_mitigations enum to allow for their usage from a module. Lastly, privatize the enum and cpu_mitigations variable since the value of cpu_mitigations can be checked with the exported helper functions. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pawan Gupta authored
commit cad14885 upstream. Add the new cpu family ATOM_TREMONT_D to the cpu vunerability whitelist. ATOM_TREMONT_D is not affected by X86_BUG_ITLB_MULTIHIT. ATOM_TREMONT_D might have mitigations against other issues as well, but only the ITLB multihit mitigation is confirmed at this point. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineela Tummalapalli authored
commit db4d30fb upstream. Some processors may incur a machine check error possibly resulting in an unrecoverable CPU lockup when an instruction fetch encounters a TLB multi-hit in the instruction TLB. This can occur when the page size is changed along with either the physical address or cache type. The relevant erratum can be found here: https://bugzilla.kernel.org/show_bug.cgi?id=205195 There are other processors affected for which the erratum does not fully disclose the impact. This issue affects both bare-metal x86 page tables and EPT. It can be mitigated by either eliminating the use of large pages or by using careful TLB invalidations when changing the page size in the page tables. Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which are mitigated against this issue. Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josh Poimboeuf authored
commit 012206a8 upstream. For new IBRS_ALL CPUs, the Enhanced IBRS check at the beginning of cpu_bugs_smt_update() causes the function to return early, unintentionally skipping the MDS and TAA logic. This is not a problem for MDS, because there appears to be no overlap between IBRS_ALL and MDS-affected CPUs. So the MDS mitigation would be disabled and nothing would need to be done in this function anyway. But for TAA, the TAA_MSG_SMT string will never get printed on Cascade Lake and newer. The check is superfluous anyway: when 'spectre_v2_enabled' is SPECTRE_V2_IBRS_ENHANCED, 'spectre_v2_user' is always SPECTRE_V2_USER_NONE, and so the 'spectre_v2_user' switch statement handles it appropriately by doing nothing. So just remove the check. Fixes: 1b42f017 ("x86/speculation/taa: Add mitigation for TSX Async Abort") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
commit db616173 upstream. There is a general consensus that TSX usage is not largely spread while the history shows there is a non trivial space for side channel attacks possible. Therefore the tsx is disabled by default even on platforms that might have a safe implementation of TSX according to the current knowledge. This is a fair trade off to make. There are, however, workloads that really do benefit from using TSX and updating to a newer kernel with TSX disabled might introduce a noticeable regressions. This would be especially a problem for Linux distributions which will provide TAA mitigations. Introduce config options X86_INTEL_TSX_MODE_OFF, X86_INTEL_TSX_MODE_ON and X86_INTEL_TSX_MODE_AUTO to control the TSX feature. The config setting can be overridden by the tsx cmdline options. [ bp: Text cleanups from Josh. ] Suggested-by: Borislav Petkov <bpetkov@suse.de> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pawan Gupta authored
commit a7a248c5 upstream. Add the documenation for TSX Async Abort. Include the description of the issue, how to check the mitigation state, control the mitigation, guidance for system administrators. [ bp: Add proper SPDX tags, touch ups by Josh and me. ] Co-developed-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-