- 30 Jun, 2020 40 commits
-
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit 6a29d134 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit 75d057bd upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit ec4d3e3a upstream. This patch fixes commit 75388acd ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested by: F. Erhard <erhard_f@mailbox.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit 9453264e upstream. go7007_snd_init() misses a snd_card_free() in an error path. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> [Salvatore Bonaccorso: Adjust context for backport to versions which do not contain c0decac1 ("media: use strscpy() instead of strlcpy()") and ba78170e ("media: go7007: Fix misuse of strscpy")] Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Christian Lamparter authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit b14fba7e upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Punit Agrawal authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit d601afca upstream. It's an error if the value of the RX/TX tail descriptor does not match what was written. The error condition is true regardless the duration of the interference from ME. But the driver only performs the reset if E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have transpired. The extra condition can lead to inconsistency between the state of hardware as expected by the driver. Fix this by dropping the check for number of delay iterations. While at it, also make __ew32_prepare() static as it's not used anywhere else. CC: stable <stable@vger.kernel.org> Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Ashok Raj authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit aa0ce96d upstream. Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge, so pci_configure_mps() previously ignored them, which may result in reduced performance. Instead, program the Max_Payload_Size of RCiEPs to the maximum supported value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also affects the subsequent programming of Max_Read_Request_Size because Linux programs MRRS based on the MPS value. Fixes: 9dae3a97 ("PCI: Move MPS configuration check to pci_configure_device()") Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.comTested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Roberto Sassu authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 067a436b ] This patch prevents the following oops: [ 10.771813] BUG: kernel NULL pointer dereference, address: 0000000000000 [...] [ 10.779790] RIP: 0010:ima_match_policy+0xf7/0xb80 [...] [ 10.798576] Call Trace: [ 10.798993] ? ima_lsm_policy_change+0x2b0/0x2b0 [ 10.799753] ? inode_init_owner+0x1a0/0x1a0 [ 10.800484] ? _raw_spin_lock+0x7a/0xd0 [ 10.801592] ima_must_appraise.part.0+0xb6/0xf0 [ 10.802313] ? ima_fix_xattr.isra.0+0xd0/0xd0 [ 10.803167] ima_must_appraise+0x4f/0x70 [ 10.804004] ima_post_path_mknod+0x2e/0x80 [ 10.804800] do_mknodat+0x396/0x3c0 It occurs when there is a failure during IMA initialization, and ima_init_policy() is not called. IMA hooks still call ima_match_policy() but ima_rules is NULL. This patch prevents the crash by directly assigning the ima_default_policy pointer to ima_rules when ima_rules is defined. This wouldn't alter the existing behavior, as ima_rules is always set at the end of ima_init_policy(). Cc: stable@vger.kernel.org # 3.7.x Fixes: 07f6a794 ("ima: add appraise action keywords and default rules") Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Omar Sandoval authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 6d3113a1 ] In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID stripe or chunk, we submit orig_bio without cloning it. In this case, we don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we decrement pending_bios to -1, and we never complete orig_bio. Fix it by initializing pending_bios to 1 instead of incrementing later. Fixing this exposes another bug: we put orig_bio prematurely and then put it again from end_io. Fix it by not putting orig_bio. After this change, pending_bios is really more of a reference count, but I'll leave that cleanup separate to keep the fix small. Fixes: e65e1535 ("btrfs: fix panic caused by direct IO") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Marcos Paulo de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 89efda52 ] Whenever a chown is executed, all capabilities of the file being touched are lost. When doing incremental send with a file with capabilities, there is a situation where the capability can be lost on the receiving side. The sequence of actions bellow shows the problem: $ mount /dev/sda fs1 $ mount /dev/sdb fs2 $ touch fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_init $ btrfs send fs1/snap_init | btrfs receive fs2 $ chgrp adm fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_complete $ btrfs subvolume snapshot -r fs1 fs1/snap_incremental $ btrfs send fs1/snap_complete | btrfs receive fs2 $ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2 At this point, only a chown was emitted by "btrfs send" since only the group was changed. This makes the cap_sys_nice capability to be dropped from fs2/snap_incremental/foo.bar To fix that, only emit capabilities after chown is emitted. The current code first checks for xattrs that are new/changed, emits them, and later emit the chown. Now, __process_new_xattr skips capabilities, letting only finish_inode_if_needed to emit them, if they exist, for the inode being processed. This behavior was being worked around in "btrfs receive" side by caching the capability and only applying it after chown. Now, xattrs are only emmited _after_ chown, making that workaround not needed anymore. Link: https://github.com/kdave/btrfs-progs/issues/202 CC: stable@vger.kernel.org # 4.4+ Suggested-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 1ec9a1ae ] If we delete a snapshot, fsync its parent directory and crash/power fail before the next transaction commit, on the next mount when we attempt to replay the log tree of the root containing the parent directory we will fail and prevent the filesystem from mounting, which is solvable by wiping out the log trees with the btrfs-zero-log tool but very inconvenient as we will lose any data and metadata fsynced before the parent directory was fsynced. For example: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ btrfs subvolume snapshot /mnt /mnt/testdir/snap $ btrfs subvolume delete /mnt/testdir/snap $ xfs_io -c "fsync" /mnt/testdir < crash / power failure and reboot > $ mount /dev/sdc /mnt mount: mount(2) failed: No such file or directory And in dmesg/syslog we get the following message and trace: [192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [192066.363010] ------------[ cut here ]------------ [192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]() [192066.367250] BTRFS: Transaction aborted (error -2) [192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G W 4.4.0-rc6-btrfs-next-20+ #1 [192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [192066.380889] 0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8 [192066.382561] ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe [192066.384191] ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710 [192066.385827] Call Trace: [192066.386373] [<ffffffff81257570>] dump_stack+0x4e/0x79 [192066.387387] [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2 [192066.388429] [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.389236] [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50 [192066.389884] [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs] [192066.390621] [<ffffffff81184b55>] ? iput+0xb0/0x266 [192066.391200] [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [192066.391930] [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs] [192066.392715] [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs] [192066.393510] [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs] [192066.394241] [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs] [192066.394958] [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs] [192066.395628] [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs] [192066.396790] [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs] [192066.397891] [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs] [192066.398897] [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs] [192066.399823] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.400739] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.401700] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.402482] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.403930] [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs] [192066.404831] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf [192066.405726] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3 [192066.406621] [<ffffffff811714b9>] mount_fs+0x67/0x131 [192066.407401] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde [192066.408247] [<ffffffff8118ae36>] do_mount+0x893/0x9d2 [192066.409047] [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c [192066.409842] [<ffffffff8118b187>] SyS_mount+0x75/0xa1 [192066.410621] [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b [192066.411572] ---[ end trace 2de42126c1e0a0f0 ]--- [192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry [192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree) [192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30 [192066.444613] BTRFS: open_ctree failed This happens because when we are replaying the log and processing the directory entry pointing to the snapshot in the subvolume tree, we treat its btrfs_dir_item item as having a location with a key type matching BTRFS_INODE_ITEM_KEY, which is wrong because the type matches BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the object id refers to a root number and not to an inode in the root containing the parent directory. So fix this by triggering a transaction commit if an fsync against the parent directory is requested after deleting a snapshot. This is the simplest approach for a rare use case. Some alternative that avoids the transaction commit would require more code to explicitly delete the snapshot at log replay time (factoring out common code from ioctl.c: btrfs_ioctl_snap_destroy()), special care at fsync time to remove the log tree of the snapshot's root from the log root of the root of tree roots, amongst other steps. A test case for xfstests that triggers the issue follows. seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { _cleanup_flakey cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_target flakey _require_metadata_journaling $SCRATCH_DEV rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _init_flakey _mount_flakey # Create a snapshot at the root of our filesystem (mount point path), delete it, # fsync the mount point path, crash and mount to replay the log. This should # succeed and after the filesystem is mounted the snapshot should not be visible # anymore. _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT _flakey_drop_and_remount [ -e $SCRATCH_MNT/snap1 ] && \ echo "Snapshot snap1 still exists after log replay" # Similar scenario as above, but this time the snapshot is created inside a # directory and not directly under the root (mount point path). mkdir $SCRATCH_MNT/testdir _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2 _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir _flakey_drop_and_remount [ -e $SCRATCH_MNT/testdir/snap2 ] && \ echo "Snapshot snap2 still exists after log replay" _unmount_flakey echo "Silence is golden" status=0 exit Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Harshad Shirwadkar authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit c36a71b4 upstream. If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned (-1) resulting in illegal memory accesses. Although there is no consistent repro, we see that generic/019 sometimes crashes because of this bug. Ran gce-xfstests smoke and verified that there were no regressions. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Krzysztof Struczynski authored
BugLink: https://bugs.launchpad.net/bugs/1884564 commit 1129d31b upstream. Function hash_long() accepts unsigned long, while currently only one byte is passed from ima_hash_key(), which calculates a key for ima_htable. Given that hashing the digest does not give clear benefits compared to using the digest itself, remove hash_long() and return the modulus calculated on the first two bytes of the digest with the number of slots. Also reduce the depth of the hash table by doubling the number of slots. Cc: stable@vger.kernel.org Fixes: 3323eec9 ("integrity: IMA as an integrity service provider") Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Acked-by: David.Laight@aculab.com (big endian system concerns) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Qiushi Wu authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit c343bf1b ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Signed-off-by: Qiushi Wu <wu000273@umn.edu> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit f0410bbf ] DW APB SSI DMA-part of the driver may need to perform the requested SPI-transfer synchronously. In that case the dma_transfer() callback will return 0 as a marker of the SPI transfer being finished so the SPI core doesn't need to wait and may proceed with the SPI message trasnfers pumping procedure. This will be needed to fix the problem when DMA transactions are finished, but there is still data left in the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer to return 1 as the normal dw_spi_transfer_one() method. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Xie XiuQi authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 3b70683f ] ubsan report this warning, fix it by adding a unsigned suffix. UBSAN: signed-integer-overflow in drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26 65535 * 65537 cannot be represented in type 'int' CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020 Workqueue: ixgbe ixgbe_service_task [ixgbe] Call trace: dump_backtrace+0x0/0x3f0 show_stack+0x28/0x38 dump_stack+0x154/0x1e4 ubsan_epilogue+0x18/0x60 handle_overflow+0xf8/0x148 __ubsan_handle_mul_overflow+0x34/0x48 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe] ixgbe_service_task+0xc20/0x1f78 [ixgbe] process_one_work+0x8f0/0xf18 worker_thread+0x430/0x6d0 kthread+0x218/0x238 ret_from_fork+0x10/0x18 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
YuanJunQing authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 31e1b3ef ] Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe(). Signed-off-by: YuanJunQing <yuanjunqing66@163.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Jiaxun Yang authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit b6caa1d8 ] Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on. That would allow us quirk devices with junk in BARs but can't disable their decoding. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Alexander Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 81f3dc93 ] Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check. This is an example of such ICMPv6 packet: skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000 skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00 skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01 skb headroom: 00000020: 02 40 43 80 00 00 86 dd skb linear: 00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00 skb linear: 00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d skb linear: 00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c skb linear: 00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81 skb linear: 00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00 skb tailroom: 00000000: ... skb tailroom: 00000010: ... skb tailroom: 00000020: ... skb tailroom: 00000030: ... Call Trace, how it happens exactly: ... macvlan_handle_frame+0x321/0x425 [macvlan] ? macvlan_forward_source+0x110/0x110 [macvlan] __netif_receive_skb_core+0x545/0xda0 ? enqueue_task_fair+0xe5/0x8e0 ? __netif_receive_skb_one_core+0x36/0x70 __netif_receive_skb_one_core+0x36/0x70 process_backlog+0x97/0x140 net_rx_action+0x1eb/0x350 ? __hrtimer_run_queues+0x136/0x2e0 __do_softirq+0xe3/0x383 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.4+0x4e/0x50 netif_rx_ni+0x60/0xd0 dev_loopback_xmit+0x83/0xf0 ip6_finish_output2+0x575/0x590 [ipv6] ? ip6_cork_release.isra.1+0x64/0x90 [ipv6] ? __ip6_make_skb+0x38d/0x680 [ipv6] ? ip6_output+0x6c/0x140 [ipv6] ip6_output+0x6c/0x140 [ipv6] ip6_send_skb+0x1e/0x60 [ipv6] rawv6_sendmsg+0xc4b/0xe10 [ipv6] ? proc_put_long+0xd0/0xd0 ? rw_copy_check_uvector+0x4e/0x110 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x2b6/0x2d0 ? proc_dointvec+0x23/0x30 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6] ? dev_forward_change+0x130/0x130 [ipv6] ? _raw_spin_unlock+0x12/0x30 ? proc_sys_call_handler.isra.14+0x9f/0x110 ? __call_rcu+0x213/0x510 ? get_max_files+0x10/0x10 ? trace_hardirqs_on+0x2c/0xe0 ? __sys_sendmsg+0x63/0xa0 __sys_sendmsg+0x63/0xa0 do_syscall_64+0x6c/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit bcc44f6b ] There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4. printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Thanks to Stan Johnson for capturing the console log and running git bisect. Git bisect said commit 8e3a68fb ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.auSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Arvind Sankar authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 67d631b7 ] This currently leaks kernel physical addresses into userspace. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.eduSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit ed26aacf ] Loops-per-jiffies is a special number which represents a number of noop-loop cycles per CPU-scheduler quantum - jiffies. As you understand aside from CPU-specific implementation it depends on the CPU frequency. So when a platform has the CPU frequency fixed, we have no problem and the current udelay interface will work just fine. But as soon as CPU-freq driver is enabled and the cores frequency changes, we'll end up with distorted udelay's. In order to fix this we have to accordinly adjust the per-CPU udelay_val (the same as the global loops_per_jiffy) number. This can be done in the CPU-freq transition event handler. We subscribe to that event in the MIPS arch time-inititalization method. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Pali Rohár authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 3aa42bae ] The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump [16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]--- This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list. It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form. Fixes: 8baca1a3 ("mwifiex: dump station support in uap mode") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.orgSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Guoqing Jiang authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit f6766ff6 ] We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Daniel Thompson authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 3fec4aec ] Currently there is a small window where a badly timed migration could cause in_dbg_master() to spuriously return true. Specifically if we migrate to a new core after reading the processor id and the previous core takes a breakpoint then we will evaluate true if we read kgdb_active before we get the IPI to bring us to halt. Fix this by checking irqs_disabled() first. Interrupts are always disabled when we are executing the kgdb trap so this is an acceptable prerequisite. This also allows us to replace raw_smp_processor_id() with smp_processor_id() since the short circuit logic will prevent warnings from PREEMPT_DEBUG. Fixes: dcc78711 ("kgdb: core changes to support kdb") Suggested-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.orgReviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 8a0efb8b ] Commit 3885c2b4 ("MIPS: CM: Add support for reporting CM cache errors") adds cm2_causes[] array with map of error type ID and pointers to the short description string. There is a mistake in the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18} correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table claims they have {0x17,0x18} codes. This is obviously hex-dec copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors. Fixes: 3885c2b4 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Jeremy Kerr authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 88413a6b ] Currently, we may perform a copy_to_user (through simple_read_from_buffer()) while holding a context's register_lock, while accessing the context save area. This change uses a temporary buffer for the context save area data, which we then pass to simple_read_from_buffer. Includes changes from Christoph Hellwig <hch@lst.de>. Fixes: bf1ab978 ("[POWERPC] coredump: Add SPU elf notes to coredump.") Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> [hch: renamed to function to avoid ___-prefixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Yunjian Wang authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 09f6c44a ] The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 88ec7cb2 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 18f1ca46 ] When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and CONFIG_CRYPTO_RSA enabled: lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w0)) ~~~~~~~~~~^~~ lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w1)) ~~~~~~~~~~^~~ 2 errors generated. This special case for umul_ppmm for MIPS64r6 was added in commit bbc25bee ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to GCC being inefficient and emitting a __multi3 intrinsic. There is no such issue with clang; with this patch applied, I can build this configuration without any problems and there are no link errors like mentioned in the commit above (which I can still reproduce with GCC 9.3.0 when that commit is reverted). Only use this definition when GCC is being used. This really should have been caught by commit b0c091ae ("lib/mpi: Eliminate unused umul_ppmm definitions for MIPS") when I was messing around in this area but I was not testing 64-bit MIPS at the time. Link: https://github.com/ClangBuiltLinux/linux/issues/885Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Pablo Neira Ayuso authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 0d7c8346 ] Instead of EINVAL which should be used for malformed netlink messages. Fixes: eb31628e ("netfilter: nf_tables: Add support for IPv6 NAT") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Tiezhu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 269b3a9a ] In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB memory from the low pages by plat_swiotlb_setup(), it may lead to the boot process failed with kernel panic. (1) On the Loongson and SiByte platform arch/mips/loongson64/dma.c arch/mips/sibyte/common/dma.c void __init plat_swiotlb_setup(void) { swiotlb_init(1); } kernel/dma/swiotlb.c void __init swiotlb_init(int verbose) { ... vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE); if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose)) return; ... pr_warn("Cannot allocate buffer"); no_iotlb_memory = true; } phys_addr_t swiotlb_tbl_map_single() { ... if (no_iotlb_memory) panic("Can not allocate SWIOTLB buffer earlier ..."); ... } (2) On the Cavium OCTEON platform arch/mips/cavium-octeon/dma-octeon.c void __init plat_swiotlb_setup(void) { ... octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE); if (!octeon_swiotlb) panic("%s: Failed to allocate %zu bytes align=%lx\n", __func__, swiotlbsize, PAGE_SIZE); ... } Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic case. In order to reduce the possibility of kernel panic when failed to get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as small as possible before plat_swiotlb_setup(), so make sparse_init() using top-down allocation. Reported-by: Juxin Gao <gaojuxin@loongson.cn> Co-developed-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 96f3a939 ] Currently when i2c transfers fail the error return -EREMOTEIO is assigned to err but then later overwritten when the tuner attach call is made. Fix this by returning early with the error return code -EREMOTEIO on i2c transfer failure errors. If the transfer fails, an uninitialized value will be read from b2. Addresses-Coverity: ("Unused value") Fixes: fbfee868 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit a34c7f51 ] Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’: drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable] 3143 | unsigned int pull_size; | ^~~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Christoph Hellwig authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 5bf99174 ] vm_map_ram can keep mappings around after the vm_unmap_ram. Using that with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gao Xiang <xiang@kernel.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 3e1c6846 ] The value adapter->rss_conf is stored in DMA memory, and it is assigned to rssConf, so rssConf->indTableSize can be modified at anytime by malicious hardware. Because rssConf->indTableSize is assigned to n, buffer overflow may occur when the code "rssConf->indTable[n]" is executed. To fix this possible bug, n is checked after being used. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Linus Walleij authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit e1de9438 ] Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S: bic rd, sp, #8128 bic rd, rd, #63 This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192). As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug. Fix it by this little oneline suggested by Ard: bic rd, sp, #(THREAD_SIZE - 1) & ~63 Where THREAD_SIZE is defined using THREAD_SIZE_ORDER. We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 7e4a3f7e ] We are currently treating any non-zero return value from btrfs_next_leaf() the same way, by going to the code that inserts a new checksum item in the tree. However if btrfs_next_leaf() returns an error (a value < 0), we should just stop and return the error, and not behave as if nothing has happened, since in that case we do not have a way to know if there is a next leaf or we are currently at the last leaf already. So fix that by returning the error from btrfs_next_leaf(). Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 6d2e16a3 ] Commit 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service. Fixes: 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ruSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1884564 [ Upstream commit 43dba9f3 ] It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
-